Guide to the Secure Configuration of Red Hat Enterprise Linux 9

with profile [RHEL9 DRAFT] Australian Cyber Security Centre (ACSC) ISM Official
This profile contains configuration checks for Red Hat Enterprise Linux 9 that align to the Australian Cyber Security Centre (ACSC) Information Security Manual (ISM) with the applicability marking of OFFICIAL. The ISM uses a risk-based approach to cyber security. This profile provides a guide to aligning Red Hat Enterprise Linux security controls with the ISM, which can be used to select controls specific to an organisation's security posture and risk profile. A copy of the ISM can be found at the ACSC website: https://www.cyber.gov.au/ism
This guide presents a catalog of security-relevant configuration settings for Red Hat Enterprise Linux 9. It is a rendering of content structured in the eXtensible Configuration Checklist Description Format (XCCDF) in order to support security automation. The SCAP content is is available in the scap-security-guide package which is developed at https://www.open-scap.org/security-policies/scap-security-guide.

Providing system administrators with such guidance informs them how to securely configure systems under their control in a variety of network roles. Policy makers and baseline creators can use this catalog of settings, with its associated references to higher-level security control catalogs, in order to assist them in security baseline creation. This guide is a catalog, not a checklist, and satisfaction of every item is not likely to be possible or sensible in many operational scenarios. However, the XCCDF format enables granular selection and adjustment of settings, and their association with OVAL and OCIL content provides an automated checking capability. Transformations of this document, and its associated automated checking content, are capable of providing baselines that meet a diverse set of policy objectives. Some example XCCDF Profiles, which are selections of items that form checklists and can be used as baselines, are available with this guide. They can be processed, in an automated fashion, with tools that support the Security Content Automation Protocol (SCAP). The DISA STIG, which provides required settings for US Department of Defense systems, is one example of a baseline created from this guidance.
Do not attempt to implement any of the settings in this guide without first testing them in a non-operational environment. The creators of this guidance assume no responsibility whatsoever for its use by other parties, and makes no guarantees, expressed or implied, about its quality, reliability, or any other characteristic.

Profile Information

Profile Title[RHEL9 DRAFT] Australian Cyber Security Centre (ACSC) ISM Official
Profile IDxccdf_org.ssgproject.content_profile_ism_o

CPE Platforms

  • cpe:/o:redhat:enterprise_linux:9

Revision History

Current version: 0.1.57

  • draft (as of 2021-07-29)

Table of Contents

  1. System Settings
    1. Installing and Maintaining Software
    2. Account and Access Control
    3. System Accounting with auditd
    4. Configure Syslog
    5. Network Configuration and Firewalls
    6. File Permissions and Masks
    7. SELinux
  2. Services
    1. Avahi Server
    2. Application Whitelisting Daemon
    3. Network Time Protocol
    4. Obsolete Services
    5. Proxy Server
    6. Network Routing
    7. SNMP Server
    8. SSH Server
    9. USBGuard daemon

Checklist

Group   Guide to the Secure Configuration of Red Hat Enterprise Linux 9   Group contains 71 groups and 146 rules
Group   System Settings   Group contains 49 groups and 105 rules
[ref]   Contains rules that check correct system settings.
Group   Installing and Maintaining Software   Group contains 9 groups and 18 rules
[ref]   The following sections contain information on security-relevant choices during the initial operating system installation process and the setup of software updates.
Group   System and Software Integrity   Group contains 5 groups and 7 rules
[ref]   System and software integrity can be gained by installing antivirus, increasing system encryption strength with FIPS, verifying installed software, enabling SELinux, installing an Intrusion Prevention System, etc. However, installing or enabling integrity checking tools cannot prevent intrusions, but they can detect that an intrusion may have occurred. Requirements for integrity checking may be highly dependent on the environment in which the system will be used. Snapshot-based approaches such as AIDE may induce considerable overhead in the presence of frequent software updates.
Group   Software Integrity Checking   Group contains 2 groups and 4 rules
[ref]   Both the AIDE (Advanced Intrusion Detection Environment) software and the RPM package management system provide mechanisms for verifying the integrity of installed software. AIDE uses snapshots of file metadata (such as hashes) and compares these to current system files in order to detect changes.

The RPM package management system can conduct integrity checks by comparing information in its metadata database with files installed on the system.
Group   Verify Integrity with RPM   Group contains 3 rules
[ref]   The RPM package management system includes the ability to verify the integrity of installed packages by comparing the installed files with information about the files taken from the package metadata stored in the RPM database. Although an attacker could corrupt the RPM database (analogous to attacking the AIDE database as described above), this check can still reveal modification of important files. To list which files on the system differ from what is expected by the RPM database:
$ rpm -qVa
See the man page for rpm to see a complete explanation of each column.

Rule   Verify File Hashes with RPM   [ref]

Without cryptographic integrity protections, system executables and files can be altered by unauthorized users without detection. The RPM package management system can check the hashes of installed software packages, including many that are important to system security. To verify that the cryptographic hash of system files and commands matches vendor values, run the following command to list which files on the system have hashes that differ from what is expected by the RPM database:
$ rpm -Va --noconfig | grep '^..5'
A "c" in the second column indicates that a file is a configuration file, which may appropriately be expected to change. If the file was not expected to change, investigate the cause of the change using audit logs or other means. The package can then be reinstalled to restore the file. Run the following command to determine which package owns the file:
$ rpm -qf FILENAME
The package can be reinstalled from a dnf repository using the command:
$ sudo dnf reinstall PACKAGENAME
Alternatively, the package can be reinstalled from trusted media using the command:
$ sudo rpm -Uvh PACKAGENAME
Rationale:
The hashes of important files like system executables should match the information given by the RPM database. Executables with erroneous hashes could be a sign of nefarious activity on the system.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_rpm_verify_hashes
Identifiers and References

Identifiers:  CCE-90841-8

References:  11, 2, 3, 9, 5.10.4.1, APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02, 3.3.8, 3.4.1, CCI-000366, CCI-001749, 164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i), 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6, A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, CM-6(d), CM-6(c), SI-7, SI-7(1), SI-7(6), AU-9(3), PR.DS-6, PR.DS-8, PR.IP-1, Req-11.5, SRG-OS-000480-GPOS-00227



# Find which files have incorrect hash (not in /etc, because of the system related config files) and then get files names
files_with_incorrect_hash="$(rpm -Va --noconfig | grep -E '^..5' | awk '{print $NF}' )"

# From files names get package names and change newline to space, because rpm writes each package to new line
packages_to_reinstall="$(rpm -qf $files_with_incorrect_hash | tr '\n' ' ')"

dnf reinstall -y $packages_to_reinstall

Rule   Verify and Correct Ownership with RPM   [ref]

The RPM package management system can check file ownership permissions of installed software packages, including many that are important to system security. After locating a file with incorrect permissions, which can be found with
rpm -Va | awk '{ if (substr($0,6,1)=="U" || substr($0,7,1)=="G") print $NF }'
run the following command to determine which package owns it:
$ rpm -qf FILENAME
Next, run the following command to reset its permissions to the correct values:
$ sudo rpm --setugids PACKAGENAME
Warning:  Profiles may require that specific files be owned by root while the default owner defined by the vendor is different. Such files will be reported as a finding and need to be evaluated according to your policy and deployment environment.
Rationale:
Ownership of binaries and configuration files that is incorrect could allow an unauthorized user to gain privileges that they should not have. The ownership set by the vendor should be maintained. Any deviations from this baseline should be investigated.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_rpm_verify_ownership
Identifiers and References

Identifiers:  CCE-90842-6

References:  1, 11, 12, 13, 14, 15, 16, 18, 3, 5, 6, 9, 5.10.4.1, APO01.06, APO11.04, BAI03.05, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.04, DSS05.07, DSS06.02, MEA02.01, 3.3.8, 3.4.1, CCI-001494, CCI-001496, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.7.3, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 5.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.5.1, A.12.6.2, A.12.7.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-3 R4.2, CIP-003-3 R6, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CM-6(d), CM-6(c), SI-7, SI-7(1), SI-7(6), AU-9(3), PR.AC-4, PR.DS-5, PR.IP-1, PR.PT-1, Req-11.5, SRG-OS-000256-GPOS-00097, SRG-OS-000257-GPOS-00098, SRG-OS-000278-GPOS-00108


Complexity:high
Disruption:medium
Strategy:restrict

# Declare array to hold set of RPM packages we need to correct permissions for
declare -A SETPERMS_RPM_DICT

# Create a list of files on the system having permissions different from what
# is expected by the RPM database
readarray -t FILES_WITH_INCORRECT_PERMS < <(rpm -Va --nofiledigest | awk '{ if (substr($0,6,1)=="U" || substr($0,7,1)=="G") print $NF }')

for FILE_PATH in "${FILES_WITH_INCORRECT_PERMS[@]}"
do
        RPM_PACKAGE=$(rpm -qf "$FILE_PATH")
	# Use an associative array to store packages as it's keys, not having to care about duplicates.
	SETPERMS_RPM_DICT["$RPM_PACKAGE"]=1
done

# For each of the RPM packages left in the list -- reset its permissions to the
# correct values
for RPM_PACKAGE in "${!SETPERMS_RPM_DICT[@]}"
do
        rpm --setugids "${RPM_PACKAGE}"
done

Complexity:high
Disruption:medium
Strategy:restrict
- name: Read list of files with incorrect ownership
  command: rpm -Va --nodeps --nosignature --nofiledigest --nosize --nomtime --nordev
    --nocaps --nolinkto --nomode
  args:
    warn: false
  register: files_with_incorrect_ownership
  failed_when: files_with_incorrect_ownership.rc > 1
  changed_when: false
  check_mode: false
  tags:
    - CCE-90842-6
    - CJIS-5.10.4.1
    - NIST-800-171-3.3.8
    - NIST-800-171-3.4.1
    - NIST-800-53-AU-9(3)
    - NIST-800-53-CM-6(c)
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SI-7
    - NIST-800-53-SI-7(1)
    - NIST-800-53-SI-7(6)
    - PCI-DSS-Req-11.5
    - high_complexity
    - high_severity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy
    - rpm_verify_ownership

- name: Create list of packages
  command: rpm -qf "{{ item }}"
  args:
    warn: false
  with_items: '{{ files_with_incorrect_ownership.stdout_lines | map(''regex_findall'',
    ''^[.]+[U|G]+.* (\/.*)'', ''\1'') | map(''join'') | select(''match'', ''(\/.*)'')
    | list | unique }}'
  register: list_of_packages
  changed_when: false
  check_mode: false
  when: (files_with_incorrect_ownership.stdout_lines | length > 0)
  tags:
    - CCE-90842-6
    - CJIS-5.10.4.1
    - NIST-800-171-3.3.8
    - NIST-800-171-3.4.1
    - NIST-800-53-AU-9(3)
    - NIST-800-53-CM-6(c)
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SI-7
    - NIST-800-53-SI-7(1)
    - NIST-800-53-SI-7(6)
    - PCI-DSS-Req-11.5
    - high_complexity
    - high_severity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy
    - rpm_verify_ownership

- name: Correct file ownership with RPM
  command: rpm --quiet --setugids '{{ item }}'
  args:
    warn: false
  with_items: '{{ list_of_packages.results | map(attribute=''stdout_lines'') | list
    | unique }}'
  when: (files_with_incorrect_ownership.stdout_lines | length > 0)
  tags:
    - CCE-90842-6
    - CJIS-5.10.4.1
    - NIST-800-171-3.3.8
    - NIST-800-171-3.4.1
    - NIST-800-53-AU-9(3)
    - NIST-800-53-CM-6(c)
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SI-7
    - NIST-800-53-SI-7(1)
    - NIST-800-53-SI-7(6)
    - PCI-DSS-Req-11.5
    - high_complexity
    - high_severity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy
    - rpm_verify_ownership

Rule   Verify and Correct File Permissions with RPM   [ref]

The RPM package management system can check file access permissions of installed software packages, including many that are important to system security. Verify that the file permissions of system files and commands match vendor values. Check the file permissions with the following command:
$ sudo rpm -Va | awk '{ if (substr($0,2,1)=="M") print $NF }'
Output indicates files that do not match vendor defaults. After locating a file with incorrect permissions, run the following command to determine which package owns it:
$ rpm -qf FILENAME

Next, run the following command to reset its permissions to the correct values:
$ sudo rpm --setperms PACKAGENAME
Warning:  Profiles may require that specific files have stricter file permissions than defined by the vendor. Such files will be reported as a finding and need to be evaluated according to your policy and deployment environment.
Rationale:
Permissions on system binaries and configuration files that are too generous could allow an unauthorized user to gain privileges that they should not have. The permissions set by the vendor should be maintained. Any deviations from this baseline should be investigated.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_rpm_verify_permissions
Identifiers and References

Identifiers:  CCE-90840-0

References:  1, 11, 12, 13, 14, 15, 16, 18, 3, 5, 6, 9, 5.10.4.1, APO01.06, APO11.04, BAI03.05, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.04, DSS05.07, DSS06.02, MEA02.01, 3.3.8, 3.4.1, CCI-001493, CCI-001494, CCI-001495, CCI-001496, 164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i), 4.3.3.3.9, 4.3.3.5.8, 4.3.3.7.3, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 5.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.5.1, A.12.6.2, A.12.7.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-3 R4.2, CIP-003-3 R6, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CM-6(d), CM-6(c), SI-7, SI-7(1), SI-7(6), AU-9(3), CM-6(a), PR.AC-4, PR.DS-5, PR.IP-1, PR.PT-1, Req-11.5, SRG-OS-000256-GPOS-00097, SRG-OS-000257-GPOS-00098, SRG-OS-000258-GPOS-00099, SRG-OS-000278-GPOS-00108


Complexity:high
Disruption:medium
Strategy:restrict

# Declare array to hold set of RPM packages we need to correct permissions for
declare -A SETPERMS_RPM_DICT

# Create a list of files on the system having permissions different from what
# is expected by the RPM database
readarray -t FILES_WITH_INCORRECT_PERMS < <(rpm -Va --nofiledigest | awk '{ if (substr($0,2,1)=="M") print $NF }')

for FILE_PATH in "${FILES_WITH_INCORRECT_PERMS[@]}"
do
        # NOTE: some files maybe controlled by more then one package
        readarray -t RPM_PACKAGES < <(rpm -qf "${FILE_PATH}")
        for RPM_PACKAGE in "${RPM_PACKAGES[@]}"
        do
                # Use an associative array to store packages as it's keys, not having to care about duplicates.
                SETPERMS_RPM_DICT["$RPM_PACKAGE"]=1
        done
done

# For each of the RPM packages left in the list -- reset its permissions to the
# correct values
for RPM_PACKAGE in "${!SETPERMS_RPM_DICT[@]}"
do
	rpm --restore "${RPM_PACKAGE}"
done

Complexity:high
Disruption:medium
Strategy:restrict
- name: Read list of files with incorrect permissions
  command: rpm -Va --nodeps --nosignature --nofiledigest --nosize --nomtime --nordev
    --nocaps --nolinkto --nouser --nogroup
  args:
    warn: false
  register: files_with_incorrect_permissions
  failed_when: files_with_incorrect_permissions.rc > 1
  changed_when: false
  check_mode: false
  tags:
    - CCE-90840-0
    - CJIS-5.10.4.1
    - NIST-800-171-3.3.8
    - NIST-800-171-3.4.1
    - NIST-800-53-AU-9(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-CM-6(c)
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SI-7
    - NIST-800-53-SI-7(1)
    - NIST-800-53-SI-7(6)
    - PCI-DSS-Req-11.5
    - high_complexity
    - high_severity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy
    - rpm_verify_permissions

- name: Create list of packages
  command: rpm -qf "{{ item }}"
  args:
    warn: false
  with_items: '{{ files_with_incorrect_permissions.stdout_lines | map(''regex_findall'',
    ''^[.]+[M]+.* (\/.*)'', ''\1'') | map(''join'') | select(''match'', ''(\/.*)'')
    | list | unique }}'
  register: list_of_packages
  changed_when: false
  check_mode: false
  when: (files_with_incorrect_permissions.stdout_lines | length > 0)
  tags:
    - CCE-90840-0
    - CJIS-5.10.4.1
    - NIST-800-171-3.3.8
    - NIST-800-171-3.4.1
    - NIST-800-53-AU-9(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-CM-6(c)
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SI-7
    - NIST-800-53-SI-7(1)
    - NIST-800-53-SI-7(6)
    - PCI-DSS-Req-11.5
    - high_complexity
    - high_severity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy
    - rpm_verify_permissions

- name: Correct file permissions with RPM
  command: rpm --setperms '{{ item }}'
  args:
    warn: false
  with_items: '{{ list_of_packages.results | map(attribute=''stdout_lines'') | list
    | unique }}'
  when: (files_with_incorrect_permissions.stdout_lines | length > 0)
  tags:
    - CCE-90840-0
    - CJIS-5.10.4.1
    - NIST-800-171-3.3.8
    - NIST-800-171-3.4.1
    - NIST-800-53-AU-9(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-CM-6(c)
    - NIST-800-53-CM-6(d)
    - NIST-800-53-SI-7
    - NIST-800-53-SI-7(1)
    - NIST-800-53-SI-7(6)
    - PCI-DSS-Req-11.5
    - high_complexity
    - high_severity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy
    - rpm_verify_permissions
Group   Verify Integrity with AIDE   Group contains 1 rule
[ref]   AIDE conducts integrity checks by comparing information about files with previously-gathered information. Ideally, the AIDE database is created immediately after initial system configuration, and then again after any software update. AIDE is highly configurable, with further configuration information located in /usr/share/doc/aide-VERSION.

Rule   Install AIDE   [ref]

The aide package can be installed with the following command:
$ sudo dnf install aide
Rationale:
The AIDE package must be installed if it is to be available for integrity checking.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_aide_installed
Identifiers and References

Identifiers:  CCE-90843-4

References:  BP28(R51), 1, 11, 12, 13, 14, 15, 16, 2, 3, 5, 7, 8, 9, 5.10.1.3, APO01.06, BAI01.06, BAI02.01, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS04.07, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.02, DSS06.06, CCI-002699, CCI-001744, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 4.1, SR 6.2, SR 7.6, 1034, 1288, 1341, 1417, A.11.2.4, A.12.1.2, A.12.2.1, A.12.4.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.14.2.7, A.15.2.1, A.8.2.3, CM-6(a), DE.CM-1, DE.CM-7, PR.DS-1, PR.DS-6, PR.DS-8, PR.IP-1, PR.IP-3, Req-11.5, SRG-OS-000363-GPOS-00150


Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "aide" ; then
    dnf install -y "aide"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure aide is installed
  package:
    name: aide
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-90843-4
    - CJIS-5.10.1.3
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-11.5
    - enable_strategy
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - package_aide_installed

Complexity:low
Disruption:low
Strategy:enable
include install_aide

class install_aide {
  package { 'aide':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Strategy:enable

package --add=aide


[[packages]]
name = "aide"
version = "*"
Group   Federal Information Processing Standard (FIPS)   Group contains 1 rule
[ref]   The Federal Information Processing Standard (FIPS) is a computer security standard which is developed by the U.S. Government and industry working groups to validate the quality of cryptographic modules. The FIPS standard provides four security levels to ensure adequate coverage of different industries, implementation of cryptographic modules, and organizational sizes and requirements.

FIPS 140-2 is the current standard for validating that mechanisms used to access cryptographic modules utilize authentication that meets industry and government requirements. For government systems, this allows Security Levels 1, 2, 3, or 4 for use on Red Hat Enterprise Linux 9.

See http://csrc.nist.gov/publications/PubsFIPS.html for more information.

Rule   Enable FIPS Mode   [ref]

To enable FIPS mode, run the following command:
fips-mode-setup --enable

The fips-mode-setup command will configure the system in FIPS mode by automatically configuring the following:
  • Setting the kernel FIPS mode flag (/proc/sys/crypto/fips_enabled) to 1
  • Creating /etc/system-fips
  • Setting the system crypto policy in /etc/crypto-policies/config to FIPS
  • Loading the Dracut fips module
Furthermore, the system running in FIPS mode should be FIPS certified by NIST.
Warning:  The system needs to be rebooted for these changes to take effect.
Warning:  System Crypto Modules must be provided by a vendor that undergoes FIPS-140 certifications. FIPS-140 is applicable to all Federal agencies that use cryptographic-based security systems to protect sensitive information in computer and telecommunication systems (including voice systems) as defined in Section 5131 of the Information Technology Management Reform Act of 1996, Public Law 104-106. This standard shall be used in designing and implementing cryptographic modules that Federal departments and agencies operate or are operated for them under contract. See https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.140-2.pdf To meet this, the system has to have cryptographic software provided by a vendor that has undergone this certification. This means providing documentation, test results, design information, and independent third party review by an accredited lab. While open source software is capable of meeting this, it does not meet FIPS-140 unless the vendor submits to this process.
Rationale:
Use of weak or untested encryption algorithms undermines the purposes of utilizing encryption to protect data. The operating system must implement cryptographic modules adhering to the higher standards approved by the federal government since this provides assurance they have been tested and validated.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_enable_fips_mode
Identifiers and References

Identifiers:  CCE-88742-2

References:  CCI-000068, CCI-000803, CCI-002450, 1446, CIP-003-3 R4.2, CIP-007-3 R5.1, SC-12(2), SC-12(3), IA-7, SC-13, CM-6(a), SC-12, FCS_COP.1(1), FCS_COP.1(2), FCS_COP.1(3), FCS_COP.1(4), FCS_CKM.1, FCS_CKM.2, FCS_TLSC_EXT.1, SRG-OS-000478-GPOS-00223, SRG-OS-000396-GPOS-00176, SRG-OS-000120-VMM-000600, SRG-OS-000478-VMM-001980, SRG-OS-000396-VMM-001590

Group   System Cryptographic Policies   Group contains 2 rules
[ref]   Linux has the capability to centrally configure cryptographic polices. The command update-crypto-policies is used to set the policy applicable for the various cryptographic back-ends, such as SSL/TLS libraries. The configured cryptographic policies will be the default policy used by these backends unless the application user configures them otherwise. When the system has been configured to use the centralized cryptographic policies, the administrator is assured that any application that utilizes the supported backends will follow a policy that adheres to the configured profile. Currently the supported backends are:
  • GnuTLS library
  • OpenSSL library
  • NSS library
  • OpenJDK
  • Libkrb5
  • BIND
  • OpenSSH
Applications and languages which rely on any of these backends will follow the system policies as well. Examples are apache httpd, nginx, php, and others.

Rule   Configure System Cryptography Policy   [ref]

To configure the system cryptography policy to use ciphers only from the FIPS policy, run the following command:
$ sudo update-crypto-policies --set FIPS
The rule checks if settings for selected crypto policy are configured as expected. Configuration files in the /etc/crypto-policies/back-ends are either symlinks to correct files provided by Crypto-policies package or they are regular files in case crypto policy customizations are applied. Crypto policies may be customized by crypto policy modules, in which case it is delimited from the base policy using a colon.
Warning:  The system needs to be rebooted for these changes to take effect.
Warning:  System Crypto Modules must be provided by a vendor that undergoes FIPS-140 certifications. FIPS-140 is applicable to all Federal agencies that use cryptographic-based security systems to protect sensitive information in computer and telecommunication systems (including voice systems) as defined in Section 5131 of the Information Technology Management Reform Act of 1996, Public Law 104-106. This standard shall be used in designing and implementing cryptographic modules that Federal departments and agencies operate or are operated for them under contract. See https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.140-2.pdf To meet this, the system has to have cryptographic software provided by a vendor that has undergone this certification. This means providing documentation, test results, design information, and independent third party review by an accredited lab. While open source software is capable of meeting this, it does not meet FIPS-140 unless the vendor submits to this process.
Rationale:
Centralized cryptographic policies simplify applying secure ciphers across an operating system and the applications that run on that operating system. Use of weak or untested encryption algorithms undermines the purposes of utilizing encryption to protect data.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_configure_crypto_policy
Identifiers and References

Identifiers:  CCE-83450-7

References:  164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.312(e)(1), 164.312(e)(2)(ii), 1446, CIP-003-3 R4.2, CIP-007-3 R5.1, CIP-007-3 R7.1, AC-17(a), AC-17(2), CM-6(a), MA-4(6), SC-13, SC-12(2), SC-12(3), FCS_COP.1(1), FCS_COP.1(2), FCS_COP.1(3), FCS_COP.1(4), FCS_CKM.1, FCS_CKM.2, FCS_TLSC_EXT.1, SRG-OS-000396-GPOS-00176, SRG-OS-000393-GPOS-00173, SRG-OS-000394-GPOS-00174



# include remediation functions library

var_system_crypto_policy="FIPS"



stderr_of_call=$(update-crypto-policies --set ${var_system_crypto_policy} 2>&1 > /dev/null)
rc=$?

if test "$rc" = 127; then
	echo "$stderr_of_call" >&2
	echo "Make sure that the script is installed on the remediated system." >&2
	echo "See output of the 'dnf provides update-crypto-policies' command" >&2
	echo "to see what package to (re)install" >&2

	false  # end with an error code
elif test "$rc" != 0; then
	echo "Error invoking the update-crypto-policies script: $stderr_of_call" >&2
	false  # end with an error code
fi

Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value var_system_crypto_policy # promote to variable
  set_fact:
    var_system_crypto_policy: !!str FIPS
  tags:
    - always

- name: Configure System Cryptography Policy
  lineinfile:
    path: /etc/crypto-policies/config
    regexp: ^(?!#)(\S+)$
    line: '{{ var_system_crypto_policy }}'
    create: true
  tags:
    - CCE-83450-7
    - NIST-800-53-AC-17(2)
    - NIST-800-53-AC-17(a)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-MA-4(6)
    - NIST-800-53-SC-12(2)
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SC-13
    - configure_crypto_policy
    - high_severity
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - restrict_strategy

- name: Verify that Crypto Policy is Set (runtime)
  command: /usr/bin/update-crypto-policies --set {{ var_system_crypto_policy }}
  tags:
    - CCE-83450-7
    - NIST-800-53-AC-17(2)
    - NIST-800-53-AC-17(a)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-MA-4(6)
    - NIST-800-53-SC-12(2)
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SC-13
    - configure_crypto_policy
    - high_severity
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - restrict_strategy

Rule   Configure SSH to use System Crypto Policy   [ref]

Crypto Policies provide a centralized control over crypto algorithms usage of many packages. SSH is supported by crypto policy, but the SSH configuration may be set up to ignore it. To check that Crypto Policies settings are configured correctly, ensure that the CRYPTO_POLICY variable is either commented or not set at all in the /etc/sysconfig/sshd.
Rationale:
Overriding the system crypto policy makes the behavior of the SSH service violate expectations, and makes system configuration more fragmented.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_configure_ssh_crypto_policy
Identifiers and References

Identifiers:  CCE-83445-7

References:  164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.312(e)(1), 164.312(e)(2)(ii), CIP-003-3 R4.2, CIP-007-3 R5.1, CIP-007-3 R7.1, AC-17(a), AC-17(2), CM-6(a), MA-4(6), SC-13, SRG-OS-000250-GPOS-00093



SSH_CONF="/etc/sysconfig/sshd"

sed -i "/^\s*CRYPTO_POLICY.*$/d" $SSH_CONF

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Configure SSH to use System Crypto Policy
  lineinfile:
    dest: /etc/sysconfig/sshd
    state: absent
    regexp: ^\s*CRYPTO_POLICY.*$
  tags:
    - CCE-83445-7
    - NIST-800-53-AC-17(2)
    - NIST-800-53-AC-17(a)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-MA-4(6)
    - NIST-800-53-SC-13
    - configure_ssh_crypto_policy
    - disable_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - reboot_required
Group   Sudo   Group contains 4 rules
[ref]   Sudo, which stands for "su 'do'", provides the ability to delegate authority to certain users, groups of users, or system administrators. When configured for system users and/or groups, Sudo can allow a user or group to execute privileged commands that normally only root is allowed to execute.

For more information on Sudo and addition Sudo configuration options, see https://www.sudo.ws.

Rule   Install sudo Package   [ref]

The sudo package can be installed with the following command:
$ sudo dnf install sudo
Rationale:
sudo is a program designed to allow a system administrator to give limited root privileges to users and log root activity. The basic philosophy is to give as few privileges as possible but still allow system users to get their work done.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_sudo_installed
Identifiers and References

Identifiers:  CCE-83523-1

References:  BP28(R19), 1382, 1384, 1386, CM-6(a), SRG-OS-000324-GPOS-00125


Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "sudo" ; then
    dnf install -y "sudo"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure sudo is installed
  package:
    name: sudo
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83523-1
    - NIST-800-53-CM-6(a)
    - enable_strategy
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - package_sudo_installed

Complexity:low
Disruption:low
Strategy:enable
include install_sudo

class install_sudo {
  package { 'sudo':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Strategy:enable

package --add=sudo


[[packages]]
name = "sudo"
version = "*"

Rule   Ensure Users Re-Authenticate for Privilege Escalation - sudo !authenticate   [ref]

The sudo !authenticate option, when specified, allows a user to execute commands using sudo without having to authenticate. This should be disabled by making sure that the !authenticate option does not exist in /etc/sudoers configuration file or any sudo configuration snippets in /etc/sudoers.d/.
Rationale:
Without re-authentication, users may access resources or perform tasks for which they do not have authorization.

When operating systems provide the capability to escalate a functional capability, it is critical that the user re-authenticate.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sudo_remove_no_authenticate
Identifiers and References

Identifiers:  CCE-83544-7

References:  BP28(R5), BP28(R59), 1, 12, 15, 16, 5, DSS05.04, DSS05.10, DSS06.03, DSS06.10, CCI-002038, 4.3.3.5.1, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-11, CM-6(a), PR.AC-1, PR.AC-7, SRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157, SRG-OS-000373-GPOS-00158, SRG-OS-000373-VMM-001470, SRG-OS-000373-VMM-001480, SRG-OS-000373-VMM-001490


Complexity:low
Disruption:low
Strategy:restrict

for f in $( ls /etc/sudoers /etc/sudoers.d/* 2> /dev/null ) ; do
  matching_list=$(grep -P '^(?!#).*[\s]+\!authenticate.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      # comment out "!authenticate" matches to preserve user data
      sed -i "s/^${entry}$/# &/g" $f
    done <<< "$matching_list"

    /usr/sbin/visudo -cf $f &> /dev/null || echo "Fail to validate $f with visudo"
  fi
done

Complexity:low
Disruption:low
Strategy:restrict
- name: Find /etc/sudoers.d/ files
  find:
    paths:
      - /etc/sudoers.d/
  register: sudoers
  tags:
    - CCE-83544-7
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-11
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
    - sudo_remove_no_authenticate

- name: Remove lines containing !authenticate from sudoers files
  replace:
    regexp: (^(?!#).*[\s]+\!authenticate.*$)
    replace: '# \g<1>'
    path: '{{ item.path }}'
    validate: /usr/sbin/visudo -cf %s
  with_items:
    - path: /etc/sudoers
    - '{{ sudoers.files }}'
  tags:
    - CCE-83544-7
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-11
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
    - sudo_remove_no_authenticate

Rule   Ensure Users Re-Authenticate for Privilege Escalation - sudo NOPASSWD   [ref]

The sudo NOPASSWD tag, when specified, allows a user to execute commands using sudo without having to authenticate. This should be disabled by making sure that the NOPASSWD tag does not exist in /etc/sudoers configuration file or any sudo configuration snippets in /etc/sudoers.d/.
Rationale:
Without re-authentication, users may access resources or perform tasks for which they do not have authorization.

When operating systems provide the capability to escalate a functional capability, it is critical that the user re-authenticate.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sudo_remove_nopasswd
Identifiers and References

Identifiers:  CCE-83536-3

References:  BP28(R5), BP28(R59), 1, 12, 15, 16, 5, DSS05.04, DSS05.10, DSS06.03, DSS06.10, CCI-002038, 4.3.3.5.1, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-11, CM-6(a), PR.AC-1, PR.AC-7, SRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157, SRG-OS-000373-GPOS-00158, SRG-OS-000373-VMM-001470, SRG-OS-000373-VMM-001480, SRG-OS-000373-VMM-001490


Complexity:low
Disruption:low
Strategy:restrict

for f in $( ls /etc/sudoers /etc/sudoers.d/* 2> /dev/null ) ; do
  matching_list=$(grep -P '^(?!#).*[\s]+NOPASSWD[\s]*\:.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      # comment out "NOPASSWD" matches to preserve user data
      sed -i "s/^${entry}$/# &/g" $f
    done <<< "$matching_list"

    /usr/sbin/visudo -cf $f &> /dev/null || echo "Fail to validate $f with visudo"
  fi
done

Complexity:low
Disruption:low
Strategy:restrict
- name: Find /etc/sudoers.d/ files
  find:
    paths:
      - /etc/sudoers.d/
  register: sudoers
  tags:
    - CCE-83536-3
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-11
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
    - sudo_remove_nopasswd

- name: Remove lines containing NOPASSWD from sudoers files
  replace:
    regexp: (^(?!#).*[\s]+NOPASSWD[\s]*\:.*$)
    replace: '# \g<1>'
    path: '{{ item.path }}'
    validate: /usr/sbin/visudo -cf %s
  with_items:
    - path: /etc/sudoers
    - '{{ sudoers.files }}'
  tags:
    - CCE-83536-3
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-11
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
    - sudo_remove_nopasswd

Rule   Ensure Users Re-Authenticate for Privilege Escalation - sudo   [ref]

The sudo NOPASSWD and !authenticate option, when specified, allows a user to execute commands using sudo without having to authenticate. This should be disabled by making sure that NOPASSWD and/or !authenticate do not exist in /etc/sudoers configuration file or any sudo configuration snippets in /etc/sudoers.d/."
Rationale:
Without re-authentication, users may access resources or perform tasks for which they do not have authorization.

When operating systems provide the capability to escalate a functional capability, it is critical that the user re-authenticate.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sudo_require_authentication
Identifiers and References

Identifiers:  CCE-83543-9

References:  1, 12, 15, 16, 5, DSS05.04, DSS05.10, DSS06.03, DSS06.10, CCI-002038, 4.3.3.5.1, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-11, CM-6(a), PR.AC-1, PR.AC-7, SRG-OS-000373-GPOS-00156


Complexity:low
Disruption:low
Strategy:restrict

for f in $( ls /etc/sudoers /etc/sudoers.d/* 2> /dev/null ) ; do
  matching_list=$(grep -P '^(?!#).*[\s]+NOPASSWD[\s]*\:.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      # comment out "NOPASSWD" matches to preserve user data
      sed -i "s/^${entry}$/# &/g" $f
    done <<< "$matching_list"

    /usr/sbin/visudo -cf $f &> /dev/null || echo "Fail to validate $f with visudo"
  fi
done

for f in $( ls /etc/sudoers /etc/sudoers.d/* 2> /dev/null ) ; do
  matching_list=$(grep -P '^(?!#).*[\s]+\!authenticate.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      # comment out "!authenticate" matches to preserve user data
      sed -i "s/^${entry}$/# &/g" $f
    done <<< "$matching_list"

    /usr/sbin/visudo -cf $f &> /dev/null || echo "Fail to validate $f with visudo"
  fi
done

Complexity:low
Disruption:low
Strategy:restrict
- name: Find /etc/sudoers.d/ files
  find:
    paths:
      - /etc/sudoers.d/
  register: sudoers
  tags:
    - CCE-83543-9
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-11
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
    - sudo_require_authentication

- name: Remove lines containing NOPASSWD from sudoers files
  replace:
    regexp: (^(?!#).*[\s]+NOPASSWD[\s]*\:.*$)
    replace: '# \g<1>'
    path: '{{ item.path }}'
    validate: /usr/sbin/visudo -cf %s
  with_items:
    - path: /etc/sudoers
    - '{{ sudoers.files }}'
  tags:
    - CCE-83543-9
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-11
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
    - sudo_require_authentication

- name: Find /etc/sudoers.d/ files
  find:
    paths:
      - /etc/sudoers.d/
  register: sudoers
  tags:
    - CCE-83543-9
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-11
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
    - sudo_require_authentication

- name: Remove lines containing !authenticate from sudoers files
  replace:
    regexp: (^(?!#).*[\s]+\!authenticate.*$)
    replace: '# \g<1>'
    path: '{{ item.path }}'
    validate: /usr/sbin/visudo -cf %s
  with_items:
    - path: /etc/sudoers
    - '{{ sudoers.files }}'
  tags:
    - CCE-83543-9
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-11
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
    - sudo_require_authentication
Group   System Tooling / Utilities   Group contains 1 rule
[ref]   The following checks evaluate the system for recommended base packages -- both for installation and removal.

Rule   Install rear Package   [ref]

The rear package can be installed with the following command:
$ sudo dnf install rear
Rationale:
rear contains the Relax-and-Recover (ReaR) utility. ReaR produces a bootable image of a system and restores from backup using this image.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_rear_installed
Identifiers and References

Identifiers:  CCE-83503-3


Complexity:low
Disruption:low
Strategy:enable

if ! rpm -q --quiet "rear" ; then
    dnf install -y "rear"
fi

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure rear is installed
  package:
    name: rear
    state: present
  tags:
    - CCE-83503-3
    - enable_strategy
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - package_rear_installed

Complexity:low
Disruption:low
Strategy:enable
include install_rear

class install_rear {
  package { 'rear':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Strategy:enable

package --add=rear


[[packages]]
name = "rear"
version = "*"
Group   Updating Software   Group contains 6 rules
[ref]   The dnf command line tool is used to install and update software packages. The system also provides a graphical software update tool in the System menu, in the Administration submenu, called Software Update.

Red Hat Enterprise Linux 9 systems contain an installed software catalog called the RPM database, which records metadata of installed packages. Consistently using dnf or the graphical Software Update for all software installation allows for insight into the current inventory of installed software on the system.

Rule   Configure dnf-automatic to Install Only Security Updates   [ref]

To configure dnf-automatic to install only security updates automatically, set upgrade_type to security under [commands] section in /etc/dnf/automatic.conf.
Rationale:
By default, dnf-automatic installs all available updates. Reducing the amount of updated packages only to updates that were issued as a part of a security advisory increases the system stability.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_dnf-automatic_security_updates_only
Identifiers and References

Identifiers:  CCE-83461-4

References:  BP28(R8), SI-2(5), CM-6(a), SI-2(c), FMT_SMF_EXT.1, SRG-OS-000191-GPOS-00080



CONF="/etc/dnf/automatic.conf"
APPLY_UPDATES_REGEX="[[:space:]]*\[commands]([^\n\[]*\n+)+?[[:space:]]*upgrade_type"
COMMANDS_REGEX="[[:space:]]*\[commands]"

# Try find [commands] and upgrade_type in automatic.conf, if it exists, set
# it to security, if it isn't here, add it, if [commands] doesn't exist,
# add it there
if grep -qzosP $APPLY_UPDATES_REGEX $CONF; then
    sed -i "s/upgrade_type[^(\n)]*/upgrade_type = security/" $CONF
elif grep -qs $COMMANDS_REGEX $CONF; then
    sed -i "/$COMMANDS_REGEX/a upgrade_type = security" $CONF
else
    mkdir -p /etc/dnf
    echo -e "[commands]\nupgrade_type = security" >> $CONF
fi

Rule   Ensure gpgcheck Enabled In Main dnf Configuration   [ref]

The gpgcheck option controls whether RPM packages' signatures are always checked prior to installation. To configure dnf to check package signatures before installing them, ensure the following line appears in /etc/dnf/dnf.conf in the [main] section:
gpgcheck=1
Rationale:
Changes to any software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor.
Accordingly, patches, service packs, device drivers, or operating system components must be signed with a certificate recognized and approved by the organization.
Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. Certificates used to verify the software must be from an approved Certificate Authority (CA).
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_ensure_gpgcheck_globally_activated
Identifiers and References

Identifiers:  CCE-83457-2

References:  BP28(R15), 11, 2, 3, 9, 5.10.4.1, APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02, 3.4.8, CCI-001749, 164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i), 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6, A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, CM-5(3), SI-7, SC-12, SC-12(3), CM-6(a), SA-12, SA-12(10), CM-11(a), CM-11(b), PR.DS-6, PR.DS-8, PR.IP-1, FPT_TUD_EXT.1, FPT_TUD_EXT.2, Req-6.2, SRG-OS-000366-GPOS-00153, SRG-OS-000366-VMM-001430, SRG-OS-000370-VMM-001460, SRG-OS-000404-VMM-001650


# Remediation is applicable only in certain platforms
if rpm --quiet -q yum; then

# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}
replace_or_append "/etc/dnf/dnf.conf" '^gpgcheck' '1' 'CCE-83457-2'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CCE-83457-2
    - CJIS-5.10.4.1
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-11(a)
    - NIST-800-53-CM-11(b)
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SA-12
    - NIST-800-53-SA-12(10)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - ensure_gpgcheck_globally_activated
    - high_severity
    - low_complexity
    - medium_disruption
    - no_reboot_needed
    - unknown_strategy

- name: Check existence of yum on Fedora
  stat:
    path: /etc/yum.conf
  register: yum_config_file
  check_mode: false
  when:
    - '"yum" in ansible_facts.packages'
    - ansible_distribution == "Fedora"
  tags:
    - CCE-83457-2
    - CJIS-5.10.4.1
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-11(a)
    - NIST-800-53-CM-11(b)
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SA-12
    - NIST-800-53-SA-12(10)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - ensure_gpgcheck_globally_activated
    - high_severity
    - low_complexity
    - medium_disruption
    - no_reboot_needed
    - unknown_strategy

- name: Ensure GPG check is globally activated (yum)
  ini_file:
    dest: /etc/yum.conf
    section: main
    option: gpgcheck
    value: 1
    no_extra_spaces: true
    create: false
  when:
    - '"yum" in ansible_facts.packages'
    - (ansible_distribution == "RedHat" or ansible_distribution == "CentOS" or ansible_distribution
      == "Scientific" or yum_config_file.stat.exists)
  tags:
    - CCE-83457-2
    - CJIS-5.10.4.1
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-11(a)
    - NIST-800-53-CM-11(b)
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SA-12
    - NIST-800-53-SA-12(10)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - ensure_gpgcheck_globally_activated
    - high_severity
    - low_complexity
    - medium_disruption
    - no_reboot_needed
    - unknown_strategy

- name: Ensure GPG check is globally activated (dnf)
  ini_file:
    dest: /etc/dnf/dnf.conf
    section: main
    option: gpgcheck
    value: 1
    no_extra_spaces: true
    create: false
  when:
    - '"yum" in ansible_facts.packages'
    - ansible_distribution == "Fedora"
  tags:
    - CCE-83457-2
    - CJIS-5.10.4.1
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-11(a)
    - NIST-800-53-CM-11(b)
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SA-12
    - NIST-800-53-SA-12(10)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - ensure_gpgcheck_globally_activated
    - high_severity
    - low_complexity
    - medium_disruption
    - no_reboot_needed
    - unknown_strategy

Rule   Ensure gpgcheck Enabled for Local Packages   [ref]

dnf should be configured to verify the signature(s) of local packages prior to installation. To configure dnf to verify signatures of local packages, set the localpkg_gpgcheck to 1 in /etc/dnf/dnf.conf.
Rationale:
Changes to any software components can have significant effects to the overall security of the operating system. This requirement ensures the software has not been tampered and has been provided by a trusted vendor.

Accordingly, patches, service packs, device drivers, or operating system components must be signed with a certificate recognized and approved by the organization.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_ensure_gpgcheck_local_packages
Identifiers and References

Identifiers:  CCE-83463-0

References:  BP28(R15), 11, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, 3.4.8, CCI-001749, 164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i), 4.3.4.3.2, 4.3.4.3.3, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, CM-11(a), CM-11(b), CM-6(a), CM-5(3), SA-12, SA-12(10), PR.IP-1, FPT_TUD_EXT.1, FPT_TUD_EXT.2, SRG-OS-000366-GPOS-00153, SRG-OS-000366-VMM-001430, SRG-OS-000370-VMM-001460, SRG-OS-000404-VMM-001650


# Remediation is applicable only in certain platforms
if rpm --quiet -q yum; then

# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}
replace_or_append '/etc/dnf/dnf.conf' '^localpkg_gpgcheck' '1' 'CCE-83463-0'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CCE-83463-0
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-11(a)
    - NIST-800-53-CM-11(b)
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SA-12
    - NIST-800-53-SA-12(10)
    - ensure_gpgcheck_local_packages
    - high_severity
    - low_complexity
    - medium_disruption
    - no_reboot_needed
    - unknown_strategy

- name: Check existence of yum on Fedora
  stat:
    path: /etc/yum.conf
  register: yum_config_file
  check_mode: false
  when:
    - '"yum" in ansible_facts.packages'
    - ansible_distribution == "Fedora"
  tags:
    - CCE-83463-0
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-11(a)
    - NIST-800-53-CM-11(b)
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SA-12
    - NIST-800-53-SA-12(10)
    - ensure_gpgcheck_local_packages
    - high_severity
    - low_complexity
    - medium_disruption
    - no_reboot_needed
    - unknown_strategy

- name: Ensure GPG check Enabled for Local Packages (Yum)
  ini_file:
    dest: /etc/yum.conf
    section: main
    option: localpkg_gpgcheck
    value: 1
    create: true
  when:
    - '"yum" in ansible_facts.packages'
    - (ansible_distribution == "RedHat" or ansible_distribution == "CentOS" or ansible_distribution
      == "Scientific" or yum_config_file.stat.exists)
  tags:
    - CCE-83463-0
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-11(a)
    - NIST-800-53-CM-11(b)
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SA-12
    - NIST-800-53-SA-12(10)
    - ensure_gpgcheck_local_packages
    - high_severity
    - low_complexity
    - medium_disruption
    - no_reboot_needed
    - unknown_strategy

- name: Ensure GPG check Enabled for Local Packages (DNF)
  ini_file:
    dest: /etc/dnf/dnf.conf
    section: main
    option: localpkg_gpgcheck
    value: 1
    create: true
  when:
    - '"yum" in ansible_facts.packages'
    - ansible_distribution == "Fedora"
  tags:
    - CCE-83463-0
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-11(a)
    - NIST-800-53-CM-11(b)
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SA-12
    - NIST-800-53-SA-12(10)
    - ensure_gpgcheck_local_packages
    - high_severity
    - low_complexity
    - medium_disruption
    - no_reboot_needed
    - unknown_strategy

Rule   Ensure gpgcheck Enabled for All dnf Package Repositories   [ref]

To ensure signature checking is not disabled for any repos, remove any lines from files in /etc/yum.repos.d of the form:
gpgcheck=0
Rationale:
Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. Certificates used to verify the software must be from an approved Certificate Authority (CA)."
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_ensure_gpgcheck_never_disabled
Identifiers and References

Identifiers:  CCE-83464-8

References:  BP28(R15), 11, 2, 3, 9, 5.10.4.1, APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02, 3.4.8, CCI-001749, 164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i), 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6, A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, CM-5(3), SI-7, SC-12, SC-12(3), CM-6(a), SA-12, SA-12(10), CM-11(a), CM-11(b), PR.DS-6, PR.DS-8, PR.IP-1, FPT_TUD_EXT.1, FPT_TUD_EXT.2, Req-6.2, SRG-OS-000366-GPOS-00153, SRG-OS-000366-VMM-001430, SRG-OS-000370-VMM-001460, SRG-OS-000404-VMM-001650


sed -i 's/gpgcheck\s*=.*/gpgcheck=1/g' /etc/yum.repos.d/*

Complexity:low
Disruption:medium
Strategy:enable
- name: Grep for dnf repo section names
  shell: |
    set -o pipefail
    grep -HEr '^\[.+\]' -r /etc/yum.repos.d/
  register: repo_grep_results
  ignore_errors: true
  changed_when: false
  tags:
    - CCE-83464-8
    - CJIS-5.10.4.1
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-11(a)
    - NIST-800-53-CM-11(b)
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SA-12
    - NIST-800-53-SA-12(10)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - enable_strategy
    - ensure_gpgcheck_never_disabled
    - high_severity
    - low_complexity
    - medium_disruption
    - no_reboot_needed

- name: Set gpgcheck=1 for each dnf repo
  ini_file:
    path: '{{ item[0] }}'
    section: '{{ item[1] }}'
    option: gpgcheck
    value: '1'
    no_extra_spaces: true
  loop: '{{ repo_grep_results.stdout | regex_findall( ''(.+\.repo):\[(.+)\]\n?'' )
    }}'
  tags:
    - CCE-83464-8
    - CJIS-5.10.4.1
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-11(a)
    - NIST-800-53-CM-11(b)
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SA-12
    - NIST-800-53-SA-12(10)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - enable_strategy
    - ensure_gpgcheck_never_disabled
    - high_severity
    - low_complexity
    - medium_disruption
    - no_reboot_needed

Rule   Ensure Red Hat GPG Key Installed   [ref]

To ensure the system can cryptographically verify base software packages come from Red Hat (and to connect to the Red Hat Network to receive them), the Red Hat GPG key must properly be installed. To install the Red Hat GPG key, run:
$ sudo subscription-manager register
If the system is not connected to the Internet or an RHN Satellite, then install the Red Hat GPG key from trusted media such as the Red Hat installation CD-ROM or DVD. Assuming the disc is mounted in /media/cdrom, use the following command as the root user to import it into the keyring:
$ sudo rpm --import /media/cdrom/RPM-GPG-KEY
Alternatively, the key may be pre-loaded during the RHEL installation. In such cases, the key can be installed by running the following command:
sudo rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
Rationale:
Changes to software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor. The Red Hat GPG key is necessary to cryptographically verify packages are from Red Hat.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_ensure_redhat_gpgkey_installed
Identifiers and References

Identifiers:  CCE-84180-9

References:  BP28(R15), 11, 2, 3, 9, 5.10.4.1, APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02, 3.4.8, CCI-001749, 164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i), 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6, A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, CIP-003-3 R4.2, CIP-003-3 R6, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-5(3), SI-7, SC-12, SC-12(3), CM-6(a), PR.DS-6, PR.DS-8, PR.IP-1, FPT_TUD_EXT.1, FPT_TUD_EXT.2, Req-6.2, SRG-OS-000366-GPOS-00153, SRG-OS-000366-VMM-001430, SRG-OS-000370-VMM-001460, SRG-OS-000404-VMM-001650


# The two fingerprints below are retrieved from https://access.redhat.com/security/team/key
readonly REDHAT_RELEASE_FINGERPRINT="567E347AD0044ADE55BA8A5F199E2F91FD431D51"
readonly REDHAT_AUXILIARY_FINGERPRINT="6A6AA7C97C8890AEC6AEBFE2F76F66C3D4082792"

# Location of the key we would like to import (once it's integrity verified)
readonly REDHAT_RELEASE_KEY="/etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release"

RPM_GPG_DIR_PERMS=$(stat -c %a "$(dirname "$REDHAT_RELEASE_KEY")")

# Verify /etc/pki/rpm-gpg directory permissions are safe
if [ "${RPM_GPG_DIR_PERMS}" -le "755" ]
then
  # If they are safe, try to obtain fingerprints from the key file
  # (to ensure there won't be e.g. CRC error).

  readarray -t GPG_OUT < <(gpg --with-fingerprint --with-colons "$REDHAT_RELEASE_KEY" | grep "^fpr" | cut -d ":" -f 10)

  GPG_RESULT=$?
  # No CRC error, safe to proceed
  if [ "${GPG_RESULT}" -eq "0" ]
  then
    echo "${GPG_OUT[*]}" | grep -vE "${REDHAT_RELEASE_FINGERPRINT}|${REDHAT_AUXILIARY_FINGERPRINT}" || {
      # If $REDHAT_RELEASE_KEY file doesn't contain any keys with unknown fingerprint, import it
      rpm --import "${REDHAT_RELEASE_KEY}"
    }
  fi
fi

Complexity:medium
Disruption:medium
Strategy:restrict
- name: Read permission of GPG key directory
  stat:
    path: /etc/pki/rpm-gpg/
  register: gpg_key_directory_permission
  check_mode: false
  tags:
    - CCE-84180-9
    - CJIS-5.10.4.1
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - ensure_redhat_gpgkey_installed
    - high_severity
    - medium_complexity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy

- name: Read signatures in GPG key
  command: gpg --with-fingerprint --with-colons "/etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release"
  args:
    warn: false
  changed_when: false
  register: gpg_fingerprints
  check_mode: false
  tags:
    - CCE-84180-9
    - CJIS-5.10.4.1
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - ensure_redhat_gpgkey_installed
    - high_severity
    - medium_complexity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy

- name: Set Fact - Installed GPG Fingerprints
  set_fact:
    gpg_installed_fingerprints: |-
      {{ gpg_fingerprints.stdout | regex_findall('^pub.*
      (?:^fpr[:]*)([0-9A-Fa-f]*)', '\1') | list }}
  tags:
    - CCE-84180-9
    - CJIS-5.10.4.1
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - ensure_redhat_gpgkey_installed
    - high_severity
    - medium_complexity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy

- name: Set Fact - Valid fingerprints
  set_fact:
    gpg_valid_fingerprints: ("567E347AD0044ADE55BA8A5F199E2F91FD431D51" "6A6AA7C97C8890AEC6AEBFE2F76F66C3D4082792")
  tags:
    - CCE-84180-9
    - CJIS-5.10.4.1
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - ensure_redhat_gpgkey_installed
    - high_severity
    - medium_complexity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy

- name: Import RedHat GPG key
  rpm_key:
    state: present
    key: /etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
  when:
    - gpg_key_directory_permission.stat.mode <= '0755'
    - (gpg_installed_fingerprints | difference(gpg_valid_fingerprints)) | length ==
      0
    - gpg_installed_fingerprints | length > 0
    - ansible_distribution == "RedHat"
  tags:
    - CCE-84180-9
    - CJIS-5.10.4.1
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - ensure_redhat_gpgkey_installed
    - high_severity
    - medium_complexity
    - medium_disruption
    - no_reboot_needed
    - restrict_strategy

Rule   Ensure Software Patches Installed   [ref]



NOTE: U.S. Defense systems are required to be patched within 30 days or sooner as local policy dictates.
Rationale:
Installing software updates is a fundamental mitigation against the exploitation of publicly-known vulnerabilities. If the most recent security patches and updates are not installed, unauthorized users may take advantage of weaknesses in the unpatched software. The lack of prompt attention to patching could result in a system compromise.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_security_patches_up_to_date
Identifiers and References

Identifiers:  CCE-84185-8

References:  BP28(R08), 18, 20, 4, 5.10.4.1, APO12.01, APO12.02, APO12.03, APO12.04, BAI03.10, DSS05.01, DSS05.02, CCI-000366, CCI-001227, 4.2.3, 4.2.3.12, 4.2.3.7, 4.2.3.9, A.12.6.1, A.14.2.3, A.16.1.3, A.18.2.2, A.18.2.3, SI-2(5), SI-2(c), CM-6(a), ID.RA-1, PR.IP-12, FMT_MOF_EXT.1, Req-6.2, SRG-OS-000480-GPOS-00227, SRG-OS-000480-VMM-002000


Complexity:low
Disruption:high
Reboot:true
Strategy:patch


yum -y update

Complexity:low
Disruption:high
Reboot:true
Strategy:patch
- name: Security patches are up to date
  package:
    name: '*'
    state: latest
  tags:
    - CCE-84185-8
    - CJIS-5.10.4.1
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SI-2(5)
    - NIST-800-53-SI-2(c)
    - PCI-DSS-Req-6.2
    - high_disruption
    - high_severity
    - low_complexity
    - patch_strategy
    - reboot_required
    - security_patches_up_to_date
    - skip_ansible_lint
Group   Account and Access Control   Group contains 9 groups and 15 rules
[ref]   In traditional Unix security, if an attacker gains shell access to a certain login account, they can perform any action or access any file to which that account has access. Therefore, making it more difficult for unauthorized people to gain shell access to accounts, particularly to privileged accounts, is a necessary part of securing a system. This section introduces mechanisms for restricting access to accounts under Red Hat Enterprise Linux 9.
Group   Protect Accounts by Configuring PAM   Group contains 3 groups and 6 rules
[ref]   PAM, or Pluggable Authentication Modules, is a system which implements modular authentication for Linux programs. PAM provides a flexible and configurable architecture for authentication, and it should be configured to minimize exposure to unnecessary risk. This section contains guidance on how to accomplish that.

PAM is implemented as a set of shared objects which are loaded and invoked whenever an application wishes to authenticate a user. Typically, the application must be running as root in order to take advantage of PAM, because PAM's modules often need to be able to access sensitive stores of account information, such as /etc/shadow. Traditional privileged network listeners (e.g. sshd) or SUID programs (e.g. sudo) already meet this requirement. An SUID root application, userhelper, is provided so that programs which are not SUID or privileged themselves can still take advantage of PAM.

PAM looks in the directory /etc/pam.d for application-specific configuration information. For instance, if the program login attempts to authenticate a user, then PAM's libraries follow the instructions in the file /etc/pam.d/login to determine what actions should be taken.

One very important file in /etc/pam.d is /etc/pam.d/system-auth. This file, which is included by many other PAM configuration files, defines 'default' system authentication measures. Modifying this file is a good way to make far-reaching authentication changes, for instance when implementing a centralized authentication service.
Warning:  Be careful when making changes to PAM's configuration files. The syntax for these files is complex, and modifications can have unexpected consequences. The default configurations shipped with applications should be sufficient for most users.
Warning:  Running authconfig or system-config-authentication will re-write the PAM configuration files, destroying any manually made changes and replacing them with a series of system defaults. One reference to the configuration file syntax can be found at http://www.linux-pam.org/Linux-PAM-html/sag-configuration-file.html.
Group   Set Lockouts for Failed Password Attempts   Group contains 4 rules
[ref]   The pam_faillock PAM module provides the capability to lock out user accounts after a number of failed login attempts. Its documentation is available in /usr/share/doc/pam-VERSION/txts/README.pam_faillock.

Warning:  Locking out user accounts presents the risk of a denial-of-service attack. The lockout policy must weigh whether the risk of such a denial-of-service attack outweighs the benefits of thwarting password guessing attacks.

Rule   Set Deny For Failed Password Attempts   [ref]

To configure the system to lock out accounts after a number of incorrect login attempts using pam_faillock.so, modify the content of both /etc/pam.d/system-auth and /etc/pam.d/password-auth as follows:

  • add the following line immediately before the pam_unix.so statement in the AUTH section:
    auth required pam_faillock.so preauth silent deny=3 unlock_time=0 fail_interval=900
  • add the following line immediately after the pam_unix.so statement in the AUTH section:
    auth [default=die] pam_faillock.so authfail deny=3 unlock_time=0 fail_interval=900
  • add the following line immediately before the pam_unix.so statement in the ACCOUNT section:
    account required pam_faillock.so
Rationale:
Locking out user accounts after a number of incorrect attempts prevents direct password guessing attacks.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny
Identifiers and References

Identifiers:  CCE-83587-6

References:  BP28(R18), 1, 12, 15, 16, 5.5.3, DSS05.04, DSS05.10, DSS06.10, 3.1.8, CCI-000044, CCI-002236, CCI-002237, CCI-002238, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, CM-6(a), AC-7(a), PR.AC-7, FIA_AFL.1, Req-8.1.6, SRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005, SRG-OS-000021-VMM-000050


# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then


var_accounts_passwords_pam_faillock_deny="3"



AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")

for pam_file in "${AUTH_FILES[@]}"
do
    # is auth required pam_faillock.so preauth present?
    if grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+preauth.*$' "$pam_file" ; then
        # is the option set?
        if grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+preauth.*'"deny"'=([0-9]*).*$' "$pam_file" ; then
            # just change the value of option to a correct value
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock.so.*preauth.*silent.*\)\('"deny"' *= *\).*/\1\2'"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
        # the option is not set.
        else
            # append the option
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock.so.*preauth.*silent.*/ s/$/ '"deny"'='"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
        fi
    # auth required pam_faillock.so preauth is not present, insert the whole line
    else
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix.so.*/i auth        required      pam_faillock.so preauth silent '"deny"'='"$var_accounts_passwords_pam_faillock_deny" "$pam_file"
    fi
    # is auth default pam_faillock.so authfail present?
    if grep -qE '^\s*auth\s+(\[default=die\])\s+pam_faillock\.so\s+authfail.*$' "$pam_file" ; then
        # is the option set?
        if grep -qE '^\s*auth\s+(\[default=die\])\s+pam_faillock\.so\s+authfail.*'"deny"'=([0-9]*).*$' "$pam_file" ; then
            # just change the value of option to a correct value
            sed -i --follow-symlinks 's/\(^auth.*[default=die].*pam_faillock.so.*authfail.*\)\('"deny"' *= *\).*/\1\2'"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
        # the option is not set.
        else
            # append the option
            sed -i --follow-symlinks '/^auth.*[default=die].*pam_faillock.so.*authfail.*/ s/$/ '"deny"'='"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
        fi
    # auth default pam_faillock.so authfail is not present, insert the whole line
    else
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix.so.*/a auth        [default=die] pam_faillock.so authfail '"deny"'='"$var_accounts_passwords_pam_faillock_deny" "$pam_file"
    fi
    if ! grep -qE '^\s*account\s+required\s+pam_faillock\.so.*$' "$pam_file" ; then
        sed -E -i --follow-symlinks '/^\s*account\s*required\s*pam_unix.so/i account     required      pam_faillock.so' "$pam_file"
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CCE-83587-6
    - CJIS-5.5.3
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.6
    - accounts_passwords_pam_faillock_deny
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
- name: XCCDF Value var_accounts_passwords_pam_faillock_deny # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_deny: !!str 3
  tags:
    - always

- name: Add auth pam_faillock preauth deny before pam_unix.so
  pamd:
    name: '{{ item }}'
    type: auth
    control: sufficient
    module_path: pam_unix.so
    new_type: auth
    new_control: required
    new_module_path: pam_faillock.so
    module_arguments: preauth silent deny={{ var_accounts_passwords_pam_faillock_deny
      }}
    state: before
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-83587-6
    - CJIS-5.5.3
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.6
    - accounts_passwords_pam_faillock_deny
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add deny argument to auth pam_faillock preauth
  pamd:
    name: '{{ item }}'
    type: auth
    control: required
    module_path: pam_faillock.so
    module_arguments: preauth silent deny={{ var_accounts_passwords_pam_faillock_deny
      }}
    state: args_present
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-83587-6
    - CJIS-5.5.3
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.6
    - accounts_passwords_pam_faillock_deny
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add auth pam_faillock authfail deny after pam_unix.so
  pamd:
    name: '{{ item }}'
    type: auth
    control: sufficient
    module_path: pam_unix.so
    new_type: auth
    new_control: '[default=die]'
    new_module_path: pam_faillock.so
    module_arguments: authfail deny={{ var_accounts_passwords_pam_faillock_deny }}
    state: after
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-83587-6
    - CJIS-5.5.3
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.6
    - accounts_passwords_pam_faillock_deny
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add deny argument to auth pam_faillock authfail
  pamd:
    name: '{{ item }}'
    type: auth
    new_type: auth
    control: '[default=die]'
    module_path: pam_faillock.so
    module_arguments: authfail deny={{ var_accounts_passwords_pam_faillock_deny }}
    state: args_present
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-83587-6
    - CJIS-5.5.3
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.6
    - accounts_passwords_pam_faillock_deny
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add account pam_faillock before pam_unix.so
  pamd:
    name: '{{ item }}'
    type: account
    control: required
    module_path: pam_unix.so
    new_type: account
    new_control: required
    new_module_path: pam_faillock.so
    state: before
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-83587-6
    - CJIS-5.5.3
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.6
    - accounts_passwords_pam_faillock_deny
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

Rule   Configure the root Account for Failed Password Attempts   [ref]

To configure the system to lock out the root account after a number of incorrect login attempts using pam_faillock.so, modify the content of both /etc/pam.d/system-auth and /etc/pam.d/password-auth as follows:

  • Modify the following line in the AUTH section to add even_deny_root:
    auth required pam_faillock.so preauth silent even_deny_root deny=3 unlock_time=0 fail_interval=900
  • Modify the following line in the AUTH section to add even_deny_root:
    auth [default=die] pam_faillock.so authfail even_deny_root deny=3 unlock_time=0 fail_interval=900
Rationale:
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, otherwise known as brute-forcing, is reduced. Limits are imposed by locking the account.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny_root
Identifiers and References

Identifiers:  CCE-83589-2

References:  BP28(R18), 1, 12, 15, 16, DSS05.04, DSS05.10, DSS06.10, CCI-002238, CCI-000044, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, CM-6(a), AC-7(b), IA-5(c), PR.AC-7, FMT_MOF_EXT.1, SRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005


# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

AUTH_FILES[0]="/etc/pam.d/system-auth"
AUTH_FILES[1]="/etc/pam.d/password-auth"

# This script fixes absence of pam_faillock.so in PAM stack or the
# absense of even_deny_root in pam_faillock.so arguments
# When inserting auth pam_faillock.so entries,
# the entry with preauth argument will be added before pam_unix.so module
# and entry with authfail argument will be added before pam_deny.so module.

# The placement of pam_faillock.so entries will not be changed
# if they are already present

for pamFile in "${AUTH_FILES[@]}"
do
	# if PAM file is missing, system is not using PAM or broken
	if [ ! -f $pamFile ]; then
		continue
	fi

	# is 'auth required' here?
	if grep -q "^auth.*required.*pam_faillock.so.*" $pamFile; then
		# has 'auth required' even_deny_root option?
		if ! grep -q "^auth.*required.*pam_faillock.so.*preauth.*even_deny_root" $pamFile; then
			# even_deny_root is not present
			sed -i --follow-symlinks "s/\(^auth.*required.*pam_faillock.so.*preauth.*\).*/\1 even_deny_root/" $pamFile
		fi
	else
		# no 'auth required', add it
		sed -i --follow-symlinks "/^auth.*pam_unix.so.*/i auth required pam_faillock.so preauth silent even_deny_root" $pamFile
	fi

	# is 'auth [default=die]' here?
	if grep -q "^auth.*\[default=die\].*pam_faillock.so.*" $pamFile; then
		# has 'auth [default=die]' even_deny_root option?
		if ! grep -q "^auth.*\[default=die\].*pam_faillock.so.*authfail.*even_deny_root" $pamFile; then
			# even_deny_root is not present
			sed -i --follow-symlinks "s/\(^auth.*\[default=die\].*pam_faillock.so.*authfail.*\).*/\1 even_deny_root/" $pamFile
		fi
	else
		# no 'auth [default=die]', add it
		sed -i --follow-symlinks "/^auth.*pam_unix.so.*/a auth [default=die] pam_faillock.so authfail silent even_deny_root" $pamFile
	fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CCE-83589-2
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(c)
    - accounts_passwords_pam_faillock_deny_root
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add auth pam_faillock preauth even_deny_root before pam_unix.so
  pamd:
    name: '{{ item }}'
    type: auth
    control: sufficient
    module_path: pam_unix.so
    new_type: auth
    new_control: required
    new_module_path: pam_faillock.so
    module_arguments: preauth silent even_deny_root
    state: before
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-83589-2
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(c)
    - accounts_passwords_pam_faillock_deny_root
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add even_deny_root argument to auth pam_faillock preauth
  pamd:
    name: '{{ item }}'
    type: auth
    control: required
    module_path: pam_faillock.so
    module_arguments: preauth silent even_deny_root
    state: args_present
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-83589-2
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(c)
    - accounts_passwords_pam_faillock_deny_root
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add auth pam_faillock authfail even_deny_root after pam_unix.so
  pamd:
    name: '{{ item }}'
    type: auth
    control: sufficient
    module_path: pam_unix.so
    new_type: auth
    new_control: '[default=die]'
    new_module_path: pam_faillock.so
    module_arguments: authfail even_deny_root
    state: after
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-83589-2
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(c)
    - accounts_passwords_pam_faillock_deny_root
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add even_deny_root argument to auth pam_faillock authfail
  pamd:
    name: '{{ item }}'
    type: auth
    control: '[default=die]'
    module_path: pam_faillock.so
    module_arguments: authfail even_deny_root
    state: args_present
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-83589-2
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(c)
    - accounts_passwords_pam_faillock_deny_root
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add account pam_faillock before pam_unix.so
  pamd:
    name: '{{ item }}'
    type: account
    control: required
    module_path: pam_unix.so
    new_type: account
    new_control: required
    new_module_path: pam_faillock.so
    state: before
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-83589-2
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(c)
    - accounts_passwords_pam_faillock_deny_root
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

Rule   Set Interval For Counting Failed Password Attempts   [ref]

Utilizing pam_faillock.so, the fail_interval directive configures the system to lock out an account after a number of incorrect login attempts within a specified time period. Modify the content of both /etc/pam.d/system-auth and /etc/pam.d/password-auth as follows:

  • Add the following line immediately before the pam_unix.so statement in the AUTH section:
    auth required pam_faillock.so preauth silent deny=3 unlock_time=0 fail_interval=900
  • Add the following line immediately after the pam_unix.so statement in the AUTH section:
    auth [default=die] pam_faillock.so authfail deny=3 unlock_time=0 fail_interval=900
    
  • Add the following line immediately before the pam_unix.so statement in the ACCOUNT section:
    account required pam_faillock.so
Rationale:
By limiting the number of failed logon attempts the risk of unauthorized system access via user password guessing, otherwise known as brute-forcing, is reduced. Limits are imposed by locking the account.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_interval
Identifiers and References

Identifiers:  CCE-83583-5

References:  BP28(R18), 1, 12, 15, 16, DSS05.04, DSS05.10, DSS06.10, CCI-000044, CCI-002236, CCI-002237, CCI-002238, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, CM-6(a), AC-7(a), PR.AC-7, FIA_AFL.1, SRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005, SRG-OS-000021-VMM-000050


# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

# include our remediation functions library

var_accounts_passwords_pam_faillock_fail_interval="900"



AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")

for pam_file in "${AUTH_FILES[@]}"
do
    # is auth required pam_faillock.so preauth present?
    if grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+preauth.*$' "$pam_file" ; then
        # is the option set?
        if grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+preauth.*'"fail_interval"'=([0-9]*).*$' "$pam_file" ; then
            # just change the value of option to a correct value
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock.so.*preauth.*silent.*\)\('"fail_interval"' *= *\).*/\1\2'"$var_accounts_passwords_pam_faillock_fail_interval"'/' "$pam_file"
        # the option is not set.
        else
            # append the option
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock.so.*preauth.*silent.*/ s/$/ '"fail_interval"'='"$var_accounts_passwords_pam_faillock_fail_interval"'/' "$pam_file"
        fi
    # auth required pam_faillock.so preauth is not present, insert the whole line
    else
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix.so.*/i auth        required      pam_faillock.so preauth silent '"fail_interval"'='"$var_accounts_passwords_pam_faillock_fail_interval" "$pam_file"
    fi
    # is auth default pam_faillock.so authfail present?
    if grep -qE '^\s*auth\s+(\[default=die\])\s+pam_faillock\.so\s+authfail.*$' "$pam_file" ; then
        # is the option set?
        if grep -qE '^\s*auth\s+(\[default=die\])\s+pam_faillock\.so\s+authfail.*'"fail_interval"'=([0-9]*).*$' "$pam_file" ; then
            # just change the value of option to a correct value
            sed -i --follow-symlinks 's/\(^auth.*[default=die].*pam_faillock.so.*authfail.*\)\('"fail_interval"' *= *\).*/\1\2'"$var_accounts_passwords_pam_faillock_fail_interval"'/' "$pam_file"
        # the option is not set.
        else
            # append the option
            sed -i --follow-symlinks '/^auth.*[default=die].*pam_faillock.so.*authfail.*/ s/$/ '"fail_interval"'='"$var_accounts_passwords_pam_faillock_fail_interval"'/' "$pam_file"
        fi
    # auth default pam_faillock.so authfail is not present, insert the whole line
    else
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix.so.*/a auth        [default=die] pam_faillock.so authfail '"fail_interval"'='"$var_accounts_passwords_pam_faillock_fail_interval" "$pam_file"
    fi
    if ! grep -qE '^\s*account\s+required\s+pam_faillock\.so.*$' "$pam_file" ; then
        sed -E -i --follow-symlinks '/^\s*account\s*required\s*pam_unix.so/i account     required      pam_faillock.so' "$pam_file"
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CCE-83583-5
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - accounts_passwords_pam_faillock_interval
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
- name: XCCDF Value var_accounts_passwords_pam_faillock_fail_interval # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_fail_interval: !!str 900
  tags:
    - always

- name: Add auth pam_faillock preauth fail_interval before pam_unix.so
  pamd:
    name: '{{ item }}'
    type: auth
    control: sufficient
    module_path: pam_unix.so
    new_type: auth
    new_control: required
    new_module_path: pam_faillock.so
    module_arguments: preauth silent fail_interval={{ var_accounts_passwords_pam_faillock_fail_interval
      }}
    state: before
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-83583-5
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - accounts_passwords_pam_faillock_interval
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add fail_interval argument to auth pam_faillock preauth
  pamd:
    name: '{{ item }}'
    type: auth
    control: required
    module_path: pam_faillock.so
    module_arguments: preauth silent fail_interval={{ var_accounts_passwords_pam_faillock_fail_interval
      }}
    state: args_present
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-83583-5
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - accounts_passwords_pam_faillock_interval
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add auth pam_faillock aufthfail fail_interval after pam_unix.so
  pamd:
    name: '{{ item }}'
    type: auth
    control: sufficient
    module_path: pam_unix.so
    new_type: auth
    new_control: '[default=die]'
    new_module_path: pam_faillock.so
    module_arguments: authfail fail_interval={{ var_accounts_passwords_pam_faillock_fail_interval
      }}
    state: after
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-83583-5
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - accounts_passwords_pam_faillock_interval
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add fail_interval argument to auth pam_faillock authfail
  pamd:
    name: '{{ item }}'
    type: auth
    control: '[default=die]'
    module_path: pam_faillock.so
    module_arguments: authfail fail_interval={{ var_accounts_passwords_pam_faillock_fail_interval
      }}
    state: args_present
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-83583-5
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - accounts_passwords_pam_faillock_interval
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add account pam_faillock before pam_unix.so
  pamd:
    name: '{{ item }}'
    type: account
    control: required
    module_path: pam_unix.so
    new_type: account
    new_control: required
    new_module_path: pam_faillock.so
    state: before
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-83583-5
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - accounts_passwords_pam_faillock_interval
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

Rule   Set Lockout Time for Failed Password Attempts   [ref]

To configure the system to lock out accounts after a number of incorrect login attempts and require an administrator to unlock the account using pam_faillock.so, modify the content of both /etc/pam.d/system-auth and /etc/pam.d/password-auth as follows:

  • add the following line immediately before the pam_unix.so statement in the AUTH section:
    auth required pam_faillock.so preauth silent deny=3 unlock_time=0 fail_interval=900
  • add the following line immediately after the pam_unix.so statement in the AUTH section:
    auth [default=die] pam_faillock.so authfail deny=3 unlock_time=0 fail_interval=900
  • add the following line immediately before the pam_unix.so statement in the ACCOUNT section:
    account required pam_faillock.so
If unlock_time is set to 0, manual intervention by an administrator is required to unlock a user.
Rationale:
Locking out user accounts after a number of incorrect attempts prevents direct password guessing attacks. Ensuring that an administrator is involved in unlocking locked accounts draws appropriate attention to such situations.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_unlock_time
Identifiers and References

Identifiers:  CCE-83588-4

References:  BP28(R18), 1, 12, 15, 16, 5.5.3, DSS05.04, DSS05.10, DSS06.10, 3.1.8, CCI-000044, CCI-002236, CCI-002237, CCI-002238, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, CM-6(a), AC-7(b), PR.AC-7, FIA_AFL.1, Req-8.1.7, SRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005, SRG-OS-000329-VMM-001180


# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then


var_accounts_passwords_pam_faillock_unlock_time="0"



AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")

for pam_file in "${AUTH_FILES[@]}"
do
    # is auth required pam_faillock.so preauth present?
    if grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+preauth.*$' "$pam_file" ; then
        # is the option set?
        if grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+preauth.*'"unlock_time"'=([0-9]*).*$' "$pam_file" ; then
            # just change the value of option to a correct value
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock.so.*preauth.*silent.*\)\('"unlock_time"' *= *\).*/\1\2'"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
        # the option is not set.
        else
            # append the option
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock.so.*preauth.*silent.*/ s/$/ '"unlock_time"'='"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
        fi
    # auth required pam_faillock.so preauth is not present, insert the whole line
    else
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix.so.*/i auth        required      pam_faillock.so preauth silent '"unlock_time"'='"$var_accounts_passwords_pam_faillock_unlock_time" "$pam_file"
    fi
    # is auth default pam_faillock.so authfail present?
    if grep -qE '^\s*auth\s+(\[default=die\])\s+pam_faillock\.so\s+authfail.*$' "$pam_file" ; then
        # is the option set?
        if grep -qE '^\s*auth\s+(\[default=die\])\s+pam_faillock\.so\s+authfail.*'"unlock_time"'=([0-9]*).*$' "$pam_file" ; then
            # just change the value of option to a correct value
            sed -i --follow-symlinks 's/\(^auth.*[default=die].*pam_faillock.so.*authfail.*\)\('"unlock_time"' *= *\).*/\1\2'"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
        # the option is not set.
        else
            # append the option
            sed -i --follow-symlinks '/^auth.*[default=die].*pam_faillock.so.*authfail.*/ s/$/ '"unlock_time"'='"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
        fi
    # auth default pam_faillock.so authfail is not present, insert the whole line
    else
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix.so.*/a auth        [default=die] pam_faillock.so authfail '"unlock_time"'='"$var_accounts_passwords_pam_faillock_unlock_time" "$pam_file"
    fi
    if ! grep -qE '^\s*account\s+required\s+pam_faillock\.so.*$' "$pam_file" ; then
        sed -E -i --follow-symlinks '/^\s*account\s*required\s*pam_unix.so/i account     required      pam_faillock.so' "$pam_file"
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CCE-83588-4
    - CJIS-5.5.3
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.7
    - accounts_passwords_pam_faillock_unlock_time
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
- name: XCCDF Value var_accounts_passwords_pam_faillock_unlock_time # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_unlock_time: !!str 0
  tags:
    - always

- name: Add auth pam_faillock preauth unlock_time before pam_unix.so
  pamd:
    name: '{{ item }}'
    type: auth
    control: sufficient
    module_path: pam_unix.so
    new_type: auth
    new_control: required
    new_module_path: pam_faillock.so
    module_arguments: preauth silent unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
      }}
    state: before
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-83588-4
    - CJIS-5.5.3
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.7
    - accounts_passwords_pam_faillock_unlock_time
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add unlock_time argument to pam_faillock preauth
  pamd:
    name: '{{ item }}'
    type: auth
    control: required
    module_path: pam_faillock.so
    module_arguments: preauth silent unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
      }}
    state: args_present
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-83588-4
    - CJIS-5.5.3
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.7
    - accounts_passwords_pam_faillock_unlock_time
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add auth pam_faillock authfail unlock_interval after pam_unix.so
  pamd:
    name: '{{ item }}'
    type: auth
    control: sufficient
    module_path: pam_unix.so
    new_type: auth
    new_control: '[default=die]'
    new_module_path: pam_faillock.so
    module_arguments: authfail unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
      }}
    state: after
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-83588-4
    - CJIS-5.5.3
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.7
    - accounts_passwords_pam_faillock_unlock_time
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add unlock_time argument to auth pam_faillock authfail
  pamd:
    name: '{{ item }}'
    type: auth
    control: '[default=die]'
    module_path: pam_faillock.so
    module_arguments: authfail unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
      }}
    state: args_present
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-83588-4
    - CJIS-5.5.3
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.7
    - accounts_passwords_pam_faillock_unlock_time
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Add account pam_faillock before pam_unix.so
  pamd:
    name: '{{ item }}'
    type: account
    control: required
    module_path: pam_unix.so
    new_type: account
    new_control: required
    new_module_path: pam_faillock.so
    state: before
  loop:
    - system-auth
    - password-auth
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-83588-4
    - CJIS-5.5.3
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.7
    - accounts_passwords_pam_faillock_unlock_time
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
Group   Set Password Quality Requirements   Group contains 1 group and 1 rule
[ref]   The default pam_pwquality PAM module provides strength checking for passwords. It performs a number of checks, such as making sure passwords are not similar to dictionary words, are of at least a certain length, are not the previous password reversed, and are not simply a change of case from the previous password. It can also require passwords to be in certain character classes. The pam_pwquality module is the preferred way of configuring password requirements.

The man pages pam_pwquality(8) provide information on the capabilities and configuration of each.
Group   Set Password Quality Requirements with pam_pwquality   Group contains 1 rule
[ref]   The pam_pwquality PAM module can be configured to meet requirements for a variety of policies.

For example, to configure pam_pwquality to require at least one uppercase character, lowercase character, digit, and other (special) character, make sure that pam_pwquality exists in /etc/pam.d/system-auth:
password    requisite     pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type=
If no such line exists, add one as the first line of the password section in /etc/pam.d/system-auth. Next, modify the settings in /etc/security/pwquality.conf to match the following:
difok = 4
minlen = 14
dcredit = -1
ucredit = -1
lcredit = -1
ocredit = -1
maxrepeat = 3
The arguments can be modified to ensure compliance with your organization's security policy. Discussion of each parameter follows.

Rule   Ensure PAM Enforces Password Requirements - Minimum Length   [ref]

The pam_pwquality module's minlen parameter controls requirements for minimum characters required in a password. Add minlen=14 after pam_pwquality to set minimum password length requirements.
Rationale:
The shorter the password, the lower the number of possible combinations that need to be tested before the password is compromised.
Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. Password length is one factor of several that helps to determine strength and how long it takes to crack a password. Use of more characters in a password helps to exponentially increase the time and/or resources required to compromose the password.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_minlen
Identifiers and References

Identifiers:  CCE-83579-3

References:  BP28(R18), 1, 12, 15, 16, 5, 5.6.2.1.1, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000205, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, FMT_MOF_EXT.1, Req-8.2.3, SRG-OS-000078-GPOS-00046, SRG-OS-000072-VMM-000390, SRG-OS-000078-VMM-000450


Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then


var_password_pam_minlen="14"
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}
replace_or_append '/etc/security/pwquality.conf' '^minlen' $var_password_pam_minlen 'CCE-83579-3' '%s = %s'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CCE-83579-3
    - CJIS-5.6.2.1.1
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(4)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.3
    - accounts_password_pam_minlen
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
- name: XCCDF Value var_password_pam_minlen # promote to variable
  set_fact:
    var_password_pam_minlen: !!str 14
  tags:
    - always

- name: Ensure PAM variable minlen is set accordingly
  lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*minlen
    line: minlen = {{ var_password_pam_minlen }}
  when: '"pam" in ansible_facts.packages'
  tags:
    - CCE-83579-3
    - CJIS-5.6.2.1.1
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(4)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.3
    - accounts_password_pam_minlen
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
Group   Protect Physical Console Access   Group contains 2 rules
[ref]   It is impossible to fully protect a system from an attacker with physical access, so securing the space in which the system is located should be considered a necessary step. However, there are some steps which, if taken, make it more difficult for an attacker to quickly or undetectably modify a system from its console.

Rule   Require Authentication for Emergency Systemd Target   [ref]

Emergency mode is intended as a system recovery method, providing a single user root access to the system during a failed boot sequence.

By default, Emergency mode is protected by requiring a password and is set in /usr/lib/systemd/system/emergency.service.
Rationale:
This prevents attackers with physical access from trivially bypassing security on the machine and gaining root access. Such accesses are further prevented by configuring the bootloader password.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_require_emergency_target_auth
Identifiers and References

Identifiers:  CCE-83592-6

References:  1, 11, 12, 14, 15, 16, 18, 3, 5, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10, 3.1.1, 3.4.5, CCI-000213, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, IA-2, AC-3, CM-6(a), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.PT-3, FIA_UAU.1, SRG-OS-000080-GPOS-00048


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

service_file="/usr/lib/systemd/system/emergency.service"

sulogin='/bin/sh -c "/sbin/sulogin; /usr/bin/systemctl --fail --no-block default"'

if grep "^ExecStart=.*" "$service_file" ; then
    sed -i "s%^ExecStart=.*%ExecStart=-$sulogin%" "$service_file"
else
    echo "ExecStart=-$sulogin" >> "$service_file"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Strategy:restrict
- name: require emergency mode password
  lineinfile:
    create: true
    dest: /usr/lib/systemd/system/emergency.service
    regexp: ^#?ExecStart=
    line: ExecStart=-/bin/sh -c "/sbin/sulogin; /usr/bin/systemctl --fail --no-block
      default"
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83592-6
    - NIST-800-171-3.1.1
    - NIST-800-171-3.4.5
    - NIST-800-53-AC-3
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-2
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - require_emergency_target_auth
    - restrict_strategy

Rule   Require Authentication for Single User Mode   [ref]

Single-user mode is intended as a system recovery method, providing a single user root access to the system by providing a boot option at startup. By default, no authentication is performed if single-user mode is selected.

By default, single-user mode is protected by requiring a password and is set in /usr/lib/systemd/system/rescue.service.
Rationale:
This prevents attackers with physical access from trivially bypassing security on the machine and gaining root access. Such accesses are further prevented by configuring the bootloader password.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_require_singleuser_auth
Identifiers and References

Identifiers:  CCE-83594-2

References:  1, 11, 12, 14, 15, 16, 18, 3, 5, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10, 3.1.1, 3.4.5, CCI-000213, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-003-3 R5.1.1, CIP-003-3 R5.3, CIP-004-3 R2.2.3, CIP-004-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, IA-2, AC-3, CM-6(a), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.PT-3, FIA_UAU.1, SRG-OS-000080-GPOS-00048


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

service_file="/usr/lib/systemd/system/rescue.service"

sulogin='/bin/sh -c "/sbin/sulogin; /usr/bin/systemctl --fail --no-block default"'

if grep "^ExecStart=.*" "$service_file" ; then
    sed -i "s%^ExecStart=.*%ExecStart=-$sulogin%" "$service_file"
else
    echo "ExecStart=-$sulogin" >> "$service_file"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Strategy:restrict
- name: require single user mode password
  lineinfile:
    create: true
    dest: /usr/lib/systemd/system/rescue.service
    regexp: ^#?ExecStart=
    line: ExecStart=-/bin/sh -c "/sbin/sulogin; /usr/bin/systemctl --fail --no-block
      default"
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83594-2
    - NIST-800-171-3.1.1
    - NIST-800-171-3.4.5
    - NIST-800-53-AC-3
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-2
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - require_singleuser_auth
    - restrict_strategy
Group   Protect Accounts by Restricting Password-Based Login   Group contains 3 groups and 7 rules
[ref]   Conventionally, Unix shell accounts are accessed by providing a username and password to a login program, which tests these values for correctness using the /etc/passwd and /etc/shadow files. Password-based login is vulnerable to guessing of weak passwords, and to sniffing and man-in-the-middle attacks against passwords entered over a network or at an insecure console. Therefore, mechanisms for accessing accounts by entering usernames and passwords should be restricted to those which are operationally necessary.
Group   Set Password Expiration Parameters   Group contains 3 rules
[ref]   The file /etc/login.defs controls several password-related settings. Programs such as passwd, su, and login consult /etc/login.defs to determine behavior with regard to password aging, expiration warnings, and length. See the man page login.defs(5) for more information.

Users should be forced to change their passwords, in order to decrease the utility of compromised passwords. However, the need to change passwords often should be balanced against the risk that users will reuse or write down passwords if forced to change them too often. Forcing password changes every 90-360 days, depending on the environment, is recommended. Set the appropriate value as PASS_MAX_DAYS and apply it to existing accounts with the -M flag.

The PASS_MIN_DAYS (-m) setting prevents password changes for 7 days after the first change, to discourage password cycling. If you use this setting, train users to contact an administrator for an emergency password change in case a new password becomes compromised. The PASS_WARN_AGE (-W) setting gives users 7 days of warnings at login time that their passwords are about to expire.

For example, for each existing human user USER, expiration parameters could be adjusted to a 180 day maximum password age, 7 day minimum password age, and 7 day warning period with the following command:
$ sudo chage -M 180 -m 7 -W 7 USER
Group   Verify Proper Storage and Existence of Password Hashes   Group contains 2 rules
[ref]   By default, password hashes for local accounts are stored in the second field (colon-separated) in /etc/shadow. This file should be readable only by processes running with root credentials, preventing users from casually accessing others' password hashes and attempting to crack them. However, it remains possible to misconfigure the system and store password hashes in world-readable files such as /etc/passwd, or to even store passwords themselves in plaintext on the system. Using system-provided tools for password change/creation should allow administrators to avoid such misconfiguration.

Rule   Verify All Account Password Hashes are Shadowed   [ref]

If any password hashes are stored in /etc/passwd (in the second field, instead of an x or *), the cause of this misconfiguration should be investigated. The account should have its password reset and the hash should be properly stored, or the account should be deleted entirely.
Rationale:
The hashes for all user account passwords should be stored in the file /etc/shadow and never in /etc/passwd, which is readable by all users.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_all_shadowed
Identifiers and References

Identifiers:  CCE-83618-9

References:  1, 12, 15, 16, 5, 5.5.2, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.5.10, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 1410, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(h), CM-6(a), PR.AC-1, PR.AC-6, PR.AC-7, Req-8.2.1

Rule   Prevent Login to Accounts With Empty Password   [ref]

If an account is configured for password authentication but does not have an assigned password, it may be possible to log into the account without authentication. Remove any instances of the nullok in /etc/pam.d/system-auth to prevent logins with empty passwords. Note that this rule is not applicable for systems running within a container. Having user with empty password within a container is not considered a risk, because it should not be possible to directly login into a container anyway.
Rationale:
If an account has an empty password, anyone could log in and run commands with the privileges of that account. Accounts with empty passwords should never be used in operational environments.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_no_empty_passwords
Identifiers and References

Identifiers:  CCE-83611-4

References:  1, 12, 13, 14, 15, 16, 18, 3, 5, 5.5.2, APO01.06, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.02, DSS06.03, DSS06.10, 3.1.1, 3.1.5, CCI-000366, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.18.1.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, IA-5(1)(a), IA-5(c), CM-6(a), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.DS-5, FIA_UAU.1, Req-8.2.3, SRG-OS-000480-GPOS-00227


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

sed --follow-symlinks -i 's/\<nullok\>//g' /etc/pam.d/system-auth
sed --follow-symlinks -i 's/\<nullok\>//g' /etc/pam.d/password-auth

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:medium
Strategy:configure
- name: Prevent Log In to Accounts With Empty Password - system-auth
  replace:
    dest: /etc/pam.d/system-auth
    regexp: nullok
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83611-4
    - CJIS-5.5.2
    - NIST-800-171-3.1.1
    - NIST-800-171-3.1.5
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.3
    - configure_strategy
    - high_severity
    - low_complexity
    - medium_disruption
    - no_empty_passwords
    - no_reboot_needed

- name: Prevent Log In to Accounts With Empty Password - password-auth
  replace:
    dest: /etc/pam.d/password-auth
    regexp: nullok
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83611-4
    - CJIS-5.5.2
    - NIST-800-171-3.1.1
    - NIST-800-171-3.1.5
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.3
    - configure_strategy
    - high_severity
    - low_complexity
    - medium_disruption
    - no_empty_passwords
    - no_reboot_needed

---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,%23%20Generated%20by%20authselect%20on%20Sat%20Oct%2027%2014%3A59%3A36%202018%0A%23%20Do%20not%20modify%20this%20file%20manually.%0A%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_env.so%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_faildelay.so%20delay%3D2000000%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_fprintd.so%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20try_first_pass%0Aauth%20%20%20%20%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet_success%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20forward_pass%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3C%201000%20quiet%0Aaccount%20%20%20%20%20%5Bdefault%3Dbad%20success%3Dok%20user_unknown%3Dignore%5D%20pam_sss.so%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_permit.so%0A%0Apassword%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_pwquality.so%20try_first_pass%20local_users_only%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20sha512%20shadow%20try_first_pass%20use_authtok%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20use_authtok%0Apassword%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_keyinit.so%20revoke%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_limits.so%0A-session%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_systemd.so%0Asession%20%20%20%20%20%5Bsuccess%3D1%20default%3Dignore%5D%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20service%20in%20crond%20quiet%20use_uid%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%0A
        mode: 0644
        path: /etc/pam.d/password-auth
        overwrite: true
      - contents:
          source: data:,%23%20Generated%20by%20authselect%20on%20Sat%20Oct%2027%2014%3A59%3A36%202018%0A%23%20Do%20not%20modify%20this%20file%20manually.%0A%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_env.so%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_faildelay.so%20delay%3D2000000%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_fprintd.so%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet%0Aauth%20%20%20%20%20%20%20%20%5Bdefault%3D1%20ignore%3Dignore%20success%3Dok%5D%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20try_first_pass%0Aauth%20%20%20%20%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3E%3D%201000%20quiet_success%0Aauth%20%20%20%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20forward_pass%0Aauth%20%20%20%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_localuser.so%0Aaccount%20%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20uid%20%3C%201000%20quiet%0Aaccount%20%20%20%20%20%5Bdefault%3Dbad%20success%3Dok%20user_unknown%3Dignore%5D%20pam_sss.so%0Aaccount%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_permit.so%0A%0Apassword%20%20%20%20requisite%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_pwquality.so%20try_first_pass%20local_users_only%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%20sha512%20shadow%20try_first_pass%20use_authtok%0Apassword%20%20%20%20sufficient%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%20use_authtok%0Apassword%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_deny.so%0A%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_keyinit.so%20revoke%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_limits.so%0A-session%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_systemd.so%0Asession%20%20%20%20%20%5Bsuccess%3D1%20default%3Dignore%5D%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_succeed_if.so%20service%20in%20crond%20quiet%20use_uid%0Asession%20%20%20%20%20required%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_unix.so%0Asession%20%20%20%20%20optional%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20%20pam_sss.so%0A
        mode: 0644
        path: /etc/pam.d/system-auth
        overwrite: true
Group   Restrict Root Logins   Group contains 2 rules
[ref]   Direct root logins should be allowed only for emergency use. In normal situations, the administrator should access the system via a unique unprivileged account, and then use su or sudo to execute privileged commands. Discouraging administrators from accessing the root account directly ensures an audit trail in organizations with multiple administrators. Locking down the channels through which root can connect directly also reduces opportunities for password-guessing against the root account. The login program uses the file /etc/securetty to determine which interfaces should allow root logins. The virtual devices /dev/console and /dev/tty* represent the system consoles (accessible via the Ctrl-Alt-F1 through Ctrl-Alt-F6 keyboard sequences on a default installation). The default securetty file also contains /dev/vc/*. These are likely to be deprecated in most environments, but may be retained for compatibility. Root should also be prohibited from connecting via network protocols. Other sections of this document include guidance describing how to prevent root from logging in via SSH.

Rule   Verify Only Root Has UID 0   [ref]

If any account other than root has a UID of 0, this misconfiguration should be investigated and the accounts other than root should be removed or have their UID changed.
If the account is associated with system commands or applications the UID should be changed to one greater than "0" but less than "1000." Otherwise assign a UID greater than "1000" that has not already been assigned.
Rationale:
An account has root authority if it has a UID of 0. Multiple accounts with a UID of 0 afford more opportunity for potential intruders to guess a password for a privileged account. Proper configuration of sudo is recommended to afford multiple system administrators access to root privileges in an accountable manner.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_accounts_no_uid_except_zero
Identifiers and References

Identifiers:  CCE-83624-7

References:  1, 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.02, DSS06.03, DSS06.10, 3.1.1, 3.1.5, CCI-000366, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.18.1.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-003-3 R5.1.1, CIP-003-3 R5.3, CIP-004-3 R2.2.3, CIP-004-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, IA-2, AC-6(5), IA-4(b), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.DS-5, SRG-OS-000480-GPOS-00227


awk -F: '$3 == 0 && $1 != "root" { print $1 }' /etc/passwd | xargs --max-lines=1 passwd -l

Rule   Ensure that System Accounts Do Not Run a Shell Upon Login   [ref]

Some accounts are not associated with a human user of the system, and exist to perform some administrative function. Should an attacker be able to log into these accounts, they should not be granted access to a shell.

The login shell for each local account is stored in the last field of each line in /etc/passwd. System accounts are those user accounts with a user ID less than UID_MIN, where value of UID_MIN directive is set in /etc/login.defs configuration file. In the default configuration UID_MIN is set to 1000, thus system accounts are those user accounts with a user ID less than 1000. The user ID is stored in the third field. If any system account SYSACCT (other than root) has a login shell, disable it with the command:
$ sudo usermod -s /sbin/nologin SYSACCT
Warning:  Do not perform the steps in this section on the root account. Doing so might cause the system to become inaccessible.
Rationale:
Ensuring shells are not given to system accounts upon login makes it more difficult for attackers to make use of system accounts.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_no_shelllogin_for_systemaccounts
Identifiers and References

Identifiers:  CCE-83623-9

References:  1, 12, 13, 14, 15, 16, 18, 3, 5, 7, 8, DSS01.03, DSS03.05, DSS05.04, DSS05.05, DSS05.07, DSS06.03, CCI-000366, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 6.2, 1491, A.12.4.1, A.12.4.3, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, AC-6, CM-6(a), CM-6(b), CM-6.1(iv), DE.CM-1, DE.CM-3, PR.AC-1, PR.AC-4, PR.AC-6, SRG-OS-000480-GPOS-00227

Group   System Accounting with auditd   Group contains 10 groups and 33 rules
[ref]   The audit service provides substantial capabilities for recording system activities. By default, the service audits about SELinux AVC denials and certain types of security-relevant events such as system logins, account modifications, and authentication events performed by programs such as sudo. Under its default configuration, auditd has modest disk space requirements, and should not noticeably impact system performance.

NOTE: The Linux Audit daemon auditd can be configured to use the augenrules program to read audit rules files (*.rules) located in /etc/audit/rules.d location and compile them to create the resulting form of the /etc/audit/audit.rules configuration file during the daemon startup (default configuration). Alternatively, the auditd daemon can use the auditctl utility to read audit rules from the /etc/audit/audit.rules configuration file during daemon startup, and load them into the kernel. The expected behavior is configured via the appropriate ExecStartPost directive setting in the /usr/lib/systemd/system/auditd.service configuration file. To instruct the auditd daemon to use the augenrules program to read audit rules (default configuration), use the following setting:
ExecStartPost=-/sbin/augenrules --load
in the /usr/lib/systemd/system/auditd.service configuration file. In order to instruct the auditd daemon to use the auditctl utility to read audit rules, use the following setting:
ExecStartPost=-/sbin/auditctl -R /etc/audit/audit.rules
in the /usr/lib/systemd/system/auditd.service configuration file. Refer to [Service] section of the /usr/lib/systemd/system/auditd.service configuration file for further details.

Government networks often have substantial auditing requirements and auditd can be configured to meet these requirements. Examining some example audit records demonstrates how the Linux audit system satisfies common requirements. The following example from Fedora Documentation available at https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/html/SELinux_Users_and_Administrators_Guide/sect-Security-Enhanced_Linux-Troubleshooting-Fixing_Problems.html#sect-Security-Enhanced_Linux-Fixing_Problems-Raw_Audit_Messages shows the substantial amount of information captured in a two typical "raw" audit messages, followed by a breakdown of the most important fields. In this example the message is SELinux-related and reports an AVC denial (and the associated system call) that occurred when the Apache HTTP Server attempted to access the /var/www/html/file1 file (labeled with the samba_share_t type):
type=AVC msg=audit(1226874073.147:96): avc:  denied  { getattr } for pid=2465 comm="httpd"
path="/var/www/html/file1" dev=dm-0 ino=284133 scontext=unconfined_u:system_r:httpd_t:s0
tcontext=unconfined_u:object_r:samba_share_t:s0 tclass=file

type=SYSCALL msg=audit(1226874073.147:96): arch=40000003 syscall=196 success=no exit=-13
a0=b98df198 a1=bfec85dc a2=54dff4 a3=2008171 items=0 ppid=2463 pid=2465 auid=502 uid=48
gid=48 euid=48 suid=48 fsuid=48 egid=48 sgid=48 fsgid=48 tty=(none) ses=6 comm="httpd"
exe="/usr/sbin/httpd" subj=unconfined_u:system_r:httpd_t:s0 key=(null)
  • msg=audit(1226874073.147:96)
    • The number in parentheses is the unformatted time stamp (Epoch time) for the event, which can be converted to standard time by using the date command.
  • { getattr }
    • The item in braces indicates the permission that was denied. getattr indicates the source process was trying to read the target file's status information. This occurs before reading files. This action is denied due to the file being accessed having the wrong label. Commonly seen permissions include getattr, read, and write.
  • comm="httpd"
    • The executable that launched the process. The full path of the executable is found in the exe= section of the system call (SYSCALL) message, which in this case, is exe="/usr/sbin/httpd".
  • path="/var/www/html/file1"
    • The path to the object (target) the process attempted to access.
  • scontext="unconfined_u:system_r:httpd_t:s0"
    • The SELinux context of the process that attempted the denied action. In this case, it is the SELinux context of the Apache HTTP Server, which is running in the httpd_t domain.
  • tcontext="unconfined_u:object_r:samba_share_t:s0"
    • The SELinux context of the object (target) the process attempted to access. In this case, it is the SELinux context of file1. Note: the samba_share_t type is not accessible to processes running in the httpd_t domain.
  • From the system call (SYSCALL) message, two items are of interest:
    • success=no: indicates whether the denial (AVC) was enforced or not. success=no indicates the system call was not successful (SELinux denied access). success=yes indicates the system call was successful - this can be seen for permissive domains or unconfined domains, such as initrc_t and kernel_t.
    • exe="/usr/sbin/httpd": the full path to the executable that launched the process, which in this case, is exe="/usr/sbin/httpd".
Group   Configure auditd Rules for Comprehensive Auditing   Group contains 7 groups and 24 rules
[ref]   The auditd program can perform comprehensive monitoring of system activity. This section describes recommended configuration settings for comprehensive auditing, but a full description of the auditing system's capabilities is beyond the scope of this guide. The mailing list linux-audit@redhat.com exists to facilitate community discussion of the auditing system.

The audit subsystem supports extensive collection of events, including:
  • Tracing of arbitrary system calls (identified by name or number) on entry or exit.
  • Filtering by PID, UID, call success, system call argument (with some limitations), etc.
  • Monitoring of specific files for modifications to the file's contents or metadata.

Auditing rules at startup are controlled by the file /etc/audit/audit.rules. Add rules to it to meet the auditing requirements for your organization. Each line in /etc/audit/audit.rules represents a series of arguments that can be passed to auditctl and can be individually tested during runtime. See documentation in /usr/share/doc/audit-VERSION and in the related man pages for more details.

If copying any example audit rulesets from /usr/share/doc/audit-VERSION, be sure to comment out the lines containing arch= which are not appropriate for your system's architecture. Then review and understand the following rules, ensuring rules are activated as needed for the appropriate architecture.

After reviewing all the rules, reading the following sections, and editing as needed, the new rules can be activated as follows:
$ sudo service auditd restart
Group   Record Events that Modify the System's Discretionary Access Controls   Group contains 2 rules
[ref]   At a minimum, the audit system should collect file permission changes for all users and root. Note that the "-F arch=b32" lines should be present even on a 64 bit system. These commands identify system calls for auditing. Even if the system is 64 bit it can still execute 32 bit system calls. Additionally, these rules can be configured in a number of ways while still achieving the desired effect. An example of this is that the "-S" calls could be split up and placed on separate lines, however, this is less efficient. Add the following to /etc/audit/audit.rules:
-a always,exit -F arch=b32 -S chmod,fchmod,fchmodat -F auid>=1000 -F auid!=unset -F key=perm_mod
    -a always,exit -F arch=b32 -S chown,fchown,fchownat,lchown -F auid>=1000 -F auid!=unset -F key=perm_mod
    -a always,exit -F arch=b32 -S setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod
If your system is 64 bit then these lines should be duplicated and the arch=b32 replaced with arch=b64 as follows:
-a always,exit -F arch=b64 -S chmod,fchmod,fchmodat -F auid>=1000 -F auid!=unset -F key=perm_mod
    -a always,exit -F arch=b64 -S chown,fchown,fchownat,lchown -F auid>=1000 -F auid!=unset -F key=perm_mod
    -a always,exit -F arch=b64 -S setxattr,lsetxattr,fsetxattr,removexattr,lremovexattr,fremovexattr -F auid>=1000 -F auid!=unset -F key=perm_mod

Rule   Record Events that Modify the System's Discretionary Access Controls - chmod   [ref]

At a minimum, the audit system should collect file permission changes for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod
Warning:  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:
The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_chmod
Identifiers and References

Identifiers:  CCE-83830-0

References:  1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000126, CCI-000130, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.5.5, SRG-OS-000064-GPOS-00033, SRG-OS-000392-GPOS-00172, SRG-OS-000458-GPOS-00203, SRG-OS-000458-VMM-001810, SRG-OS-000474-VMM-001940


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S chmod.*"
	GROUP="perm_mod"
	FULL_RULE="-a always,exit -F arch=$ARCH -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Set architecture for audit chmod tasks
  set_fact:
    audit_arch: b{{ ansible_architecture | regex_replace('.*(\d\d$)','\1') }}
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83830-0
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Search /etc/audit/rules.d for other DAC audit rules
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: -F key=perm_mod$
    patterns: '*.rules'
  register: find_chmod
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83830-0
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: If existing DAC ruleset not found, use /etc/audit/rules.d/privileged.rules
    as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/privileged.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_chmod.matched is defined and find_chmod.matched == 0
  tags:
    - CCE-83830-0
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_chmod.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_chmod.matched is defined and find_chmod.matched > 0
  tags:
    - CCE-83830-0
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the chmod rule in rules.d when on x86
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b32 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83830-0
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the chmod rule in rules.d when on x86_64
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b64 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-83830-0
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the chmod rule in /etc/audit/audit.rules when on x86
  lineinfile:
    line: -a always,exit -F arch=b32 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83830-0
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the chmod rule in audit.rules when on x86_64
  lineinfile:
    line: -a always,exit -F arch=b64 -S chmod -F auid>=1000 -F auid!=unset -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-83830-0
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chmod
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

Rule   Record Events that Modify the System's Discretionary Access Controls - chown   [ref]

At a minimum, the audit system should collect file permission changes for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod
Warning:  Note that these rules can be configured in a number of ways while still achieving the desired effect. Here the system calls have been placed independent of other system calls. Grouping these system calls with others as identifying earlier in this guide is more efficient.
Rationale:
The changing of file permissions could indicate that a user is attempting to gain access to information that would otherwise be disallowed. Auditing DAC modifications can facilitate the identification of patterns of abuse among both authorized and unauthorized users.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_audit_rules_dac_modification_chown
Identifiers and References

Identifiers:  CCE-83812-8

References:  1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000126, CCI-000130, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, FAU_GEN.1.1.c, Req-10.5.5, SRG-OS-000037-GPOS-00015, SRG-OS-000062-GPOS-00031, SRG-OS-000064-GPOS-00033, SRG-OS-000392-GPOS-00172, SRG-OS-000458-GPOS-00203, SRG-OS-000462-GPOS-00206, SRG-OS-000471-GPOS-00215, SRG-OS-000474-GPOS-00219, SRG-OS-000458-VMM-001810, SRG-OS-000474-VMM-001940


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	PATTERN="-a always,exit -F arch=$ARCH -S chown.*"
	GROUP="perm_mod"
	FULL_RULE="-a always,exit -F arch=$ARCH -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Set architecture for audit chown tasks
  set_fact:
    audit_arch: b{{ ansible_architecture | regex_replace('.*(\d\d$)','\1') }}
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83812-8
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Search /etc/audit/rules.d for other DAC audit rules
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: -F key=perm_mod$
    patterns: '*.rules'
  register: find_chown
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83812-8
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: If existing DAC ruleset not found, use /etc/audit/rules.d/privileged.rules
    as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/privileged.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_chown.matched is defined and find_chown.matched == 0
  tags:
    - CCE-83812-8
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_chown.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_chown.matched is defined and find_chown.matched > 0
  tags:
    - CCE-83812-8
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the chown rule in rules.d when on x86
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b32 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83812-8
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the chown rule in rules.d when on x86_64
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F arch=b64 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-83812-8
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the chown rule in /etc/audit/audit.rules when on x86
  lineinfile:
    line: -a always,exit -F arch=b32 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83812-8
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Inserts/replaces the chown rule in audit.rules when on x86_64
  lineinfile:
    line: -a always,exit -F arch=b64 -S chown -F auid>=1000 -F auid!=unset -F key=perm_mod
    state: present
    dest: /etc/audit/audit.rules
    create: true
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch is defined and audit_arch == 'b64'
  tags:
    - CCE-83812-8
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.5.5
    - audit_rules_dac_modification_chown
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy
Group   Record Execution Attempts to Run SELinux Privileged Commands   Group contains 6 rules
[ref]   At a minimum, the audit system should collect the execution of SELinux privileged commands for all users and root.

Rule   Record Any Attempts to Run chcon   [ref]

At a minimum, the audit system should collect any execution attempt of the chcon command for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/bin/chcon -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file:
-a always,exit -F path=/usr/bin/chcon -F auid>=1000 -F auid!=unset -F key=privileged
Rationale:
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_audit_rules_execution_chcon
Identifiers and References

Identifiers:  CCE-83748-4

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000130, CCI-000169, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1, FAU_GEN.1.1.c, SRG-OS-000037-GPOS-00015, SRG-OS-000062-GPOS-00031, SRG-OS-000392-GPOS-00172, SRG-OS-000462-GPOS-00206, SRG-OS-000463-GPOS-00207, SRG-OS-000465-GPOS-00209, SRG-OS-000471-GPOS-00215, SRG-OS-000463-VMM-001850


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



PATTERN="-a always,exit -F path=/usr/bin/chcon\\s\\+.*"
GROUP="privileged"
# Although the fix doesn't use ARCH, we reset it because it could have been set by some other remediation
ARCH=""
FULL_RULE="-a always,exit -F path=/usr/bin/chcon -F auid>=1000 -F auid!=unset -F key=privileged"
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Strategy:restrict
- name: Search /etc/audit/rules.d for audit rule entries
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: ^.*path=/usr/bin/chcon.*$
    patterns: '*.rules'
  register: find_chcon
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83748-4
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_chcon
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use /etc/audit/rules.d/privileged.rules as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/privileged.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_chcon.matched is defined and find_chcon.matched == 0
  tags:
    - CCE-83748-4
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_chcon
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_chcon.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_chcon.matched is defined and find_chcon.matched > 0
  tags:
    - CCE-83748-4
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_chcon
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Inserts/replaces the chcon rule in rules.d
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F path=/usr/bin/chcon -F auid>=1000 -F auid!=unset -F key=privileged
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83748-4
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_chcon
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Inserts/replaces the chcon rule in audit.rules
  lineinfile:
    path: /etc/audit/audit.rules
    line: -a always,exit -F path=/usr/bin/chcon -F auid>=1000 -F auid!=unset -F key=privileged
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83748-4
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_chcon
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

Rule   Record Any Attempts to Run restorecon   [ref]

At a minimum, the audit system should collect any execution attempt of the restorecon command for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/restorecon -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file:
-a always,exit -F path=/usr/sbin/restorecon -F auid>=1000 -F auid!=unset -F key=privileged
Rationale:
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_audit_rules_execution_restorecon
Identifiers and References

Identifiers:  CCE-83749-2

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1, FAU_GEN.1.1.c, SRG-OS-000392-GPOS-00172, SRG-OS-000463-GPOS-00207, SRG-OS-000465-GPOS-00209, SRG-OS-000463-VMM-001850


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



PATTERN="-a always,exit -F path=/usr/sbin/restorecon\\s\\+.*"
GROUP="privileged"
# Although the fix doesn't use ARCH, we reset it because it could have been set by some other remediation
ARCH=""
FULL_RULE="-a always,exit -F path=/usr/sbin/restorecon -F auid>=1000 -F auid!=unset -F key=privileged"
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Strategy:restrict
- name: Search /etc/audit/rules.d for audit rule entries
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: ^.*path=/usr/sbin/restorecon.*$
    patterns: '*.rules'
  register: find_restorecon
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83749-2
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_restorecon
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use /etc/audit/rules.d/privileged.rules as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/privileged.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_restorecon.matched is defined and find_restorecon.matched == 0
  tags:
    - CCE-83749-2
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_restorecon
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_restorecon.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_restorecon.matched is defined and find_restorecon.matched > 0
  tags:
    - CCE-83749-2
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_restorecon
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Inserts/replaces the restorecon rule in rules.d
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F path=/usr/sbin/restorecon -F auid>=1000 -F auid!=unset
      -F key=privileged
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83749-2
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_restorecon
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Inserts/replaces the restorecon rule in audit.rules
  lineinfile:
    path: /etc/audit/audit.rules
    line: -a always,exit -F path=/usr/sbin/restorecon -F auid>=1000 -F auid!=unset
      -F key=privileged
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83749-2
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_restorecon
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

Rule   Record Any Attempts to Run semanage   [ref]

At a minimum, the audit system should collect any execution attempt of the semanage command for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/semanage -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file:
-a always,exit -F path=/usr/sbin/semanage -F auid>=1000 -F auid!=unset -F key=privileged
Rationale:
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_audit_rules_execution_semanage
Identifiers and References

Identifiers:  CCE-83750-0

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, CIP-004-3 R2.2.2, CIP-004-3 R2.2.3, CIP-007-3 R.1.3, CIP-007-3 R5, CIP-007-3 R5.1.1, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3, AC-2(4), AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1, FAU_GEN.1.1.c, SRG-OS-000392-GPOS-00172, SRG-OS-000463-GPOS-00207, SRG-OS-000465-GPOS-00209, SRG-OS-000463-VMM-001850


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



PATTERN="-a always,exit -F path=/usr/sbin/semanage\\s\\+.*"
GROUP="privileged"
# Although the fix doesn't use ARCH, we reset it because it could have been set by some other remediation
ARCH=""
FULL_RULE="-a always,exit -F path=/usr/sbin/semanage -F auid>=1000 -F auid!=unset -F key=privileged"
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Strategy:restrict
- name: Search /etc/audit/rules.d for audit rule entries
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: ^.*path=/usr/sbin/semanage.*$
    patterns: '*.rules'
  register: find_semanage
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83750-0
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-2(4)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_semanage
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use /etc/audit/rules.d/privileged.rules as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/privileged.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_semanage.matched is defined and find_semanage.matched == 0
  tags:
    - CCE-83750-0
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-2(4)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_semanage
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_semanage.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_semanage.matched is defined and find_semanage.matched > 0
  tags:
    - CCE-83750-0
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-2(4)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_semanage
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Inserts/replaces the semanage rule in rules.d
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F path=/usr/sbin/semanage -F auid>=1000 -F auid!=unset -F
      key=privileged
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83750-0
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-2(4)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_semanage
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Inserts/replaces the semanage rule in audit.rules
  lineinfile:
    path: /etc/audit/audit.rules
    line: -a always,exit -F path=/usr/sbin/semanage -F auid>=1000 -F auid!=unset -F
      key=privileged
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83750-0
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-2(4)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_semanage
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

Rule   Record Any Attempts to Run setfiles   [ref]

At a minimum, the audit system should collect any execution attempt of the setfiles command for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/setfiles -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file:
-a always,exit -F path=/usr/sbin/setfiles -F auid>=1000 -F auid!=unset -F key=privileged
Rationale:
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_audit_rules_execution_setfiles
Identifiers and References

Identifiers:  CCE-83736-9

References:  CCI-000172, CCI-002884, AU-2(d), AU-12(c), AC-6(9), CM-6(a), SRG-OS-000392-GPOS-00172, SRG-OS-000463-GPOS-00207, SRG-OS-000465-GPOS-00209, SRG-OS-000463-VMM-001850


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



PATTERN="-a always,exit -F path=/usr/sbin/setfiles\\s\\+.*"
GROUP="privileged"
# Although the fix doesn't use ARCH, we reset it because it could have been set by some other remediation
ARCH=""
FULL_RULE="-a always,exit -F path=/usr/sbin/setfiles -F auid>=1000 -F auid!=unset -F key=privileged"
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Strategy:restrict
- name: Search /etc/audit/rules.d for audit rule entries
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: ^.*path=/usr/sbin/setfiles.*$
    patterns: '*.rules'
  register: find_setfiles
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83736-9
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_setfiles
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use /etc/audit/rules.d/privileged.rules as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/privileged.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_setfiles.matched is defined and find_setfiles.matched == 0
  tags:
    - CCE-83736-9
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_setfiles
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_setfiles.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_setfiles.matched is defined and find_setfiles.matched > 0
  tags:
    - CCE-83736-9
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_setfiles
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Inserts/replaces the setfiles rule in rules.d
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F path=/usr/sbin/setfiles -F auid>=1000 -F auid!=unset -F
      key=privileged
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83736-9
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_setfiles
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Inserts/replaces the setfiles rule in audit.rules
  lineinfile:
    path: /etc/audit/audit.rules
    line: -a always,exit -F path=/usr/sbin/setfiles -F auid>=1000 -F auid!=unset -F
      key=privileged
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83736-9
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_setfiles
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

Rule   Record Any Attempts to Run setsebool   [ref]

At a minimum, the audit system should collect any execution attempt of the setsebool command for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/setsebool -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file:
-a always,exit -F path=/usr/sbin/setsebool -F auid>=1000 -F auid!=unset -F key=privileged
Rationale:
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_audit_rules_execution_setsebool
Identifiers and References

Identifiers:  CCE-83751-8

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, BAI03.05, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000172, CCI-002884, 164.308(a)(1)(ii)(D), 164.308(a)(3)(ii)(A), 164.308(a)(5)(ii)(C), 164.312(a)(2)(i), 164.312(b), 164.312(d), 164.312(e), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.PT-1, FAU_GEN.1.1.c, SRG-OS-000392-GPOS-00172, SRG-OS-000463-GPOS-00207, SRG-OS-000465-GPOS-00209, SRG-OS-000463-VMM-001850


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



PATTERN="-a always,exit -F path=/usr/sbin/setsebool\\s\\+.*"
GROUP="privileged"
# Although the fix doesn't use ARCH, we reset it because it could have been set by some other remediation
ARCH=""
FULL_RULE="-a always,exit -F path=/usr/sbin/setsebool -F auid>=1000 -F auid!=unset -F key=privileged"
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Strategy:restrict
- name: Search /etc/audit/rules.d for audit rule entries
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: ^.*path=/usr/sbin/setsebool.*$
    patterns: '*.rules'
  register: find_setsebool
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83751-8
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_setsebool
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use /etc/audit/rules.d/privileged.rules as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/privileged.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_setsebool.matched is defined and find_setsebool.matched == 0
  tags:
    - CCE-83751-8
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_setsebool
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_setsebool.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_setsebool.matched is defined and find_setsebool.matched > 0
  tags:
    - CCE-83751-8
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_setsebool
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Inserts/replaces the setsebool rule in rules.d
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F path=/usr/sbin/setsebool -F auid>=1000 -F auid!=unset
      -F key=privileged
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83751-8
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_setsebool
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Inserts/replaces the setsebool rule in audit.rules
  lineinfile:
    path: /etc/audit/audit.rules
    line: -a always,exit -F path=/usr/sbin/setsebool -F auid>=1000 -F auid!=unset
      -F key=privileged
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83751-8
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_setsebool
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

Rule   Record Any Attempts to Run seunshare   [ref]

At a minimum, the audit system should collect any execution attempt of the seunshare command for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F path=/usr/sbin/seunshare -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file:
-a always,exit -F path=/usr/sbin/seunshare -F auid>=1000 -F auid!=unset -F key=privileged
Rationale:
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_audit_rules_execution_seunshare
Identifiers and References

Identifiers:  CCE-83746-8

References:  CCI-000172, AU-2(d), AU-12(c), AC-6(9), CM-6(a), FAU_GEN.1.1.c, SRG-OS-000463-VMM-001850


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



PATTERN="-a always,exit -F path=/usr/sbin/seunshare\\s\\+.*"
GROUP="privileged"
# Although the fix doesn't use ARCH, we reset it because it could have been set by some other remediation
ARCH=""
FULL_RULE="-a always,exit -F path=/usr/sbin/seunshare -F auid>=1000 -F auid!=unset -F key=privileged"
# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Strategy:restrict
- name: Search /etc/audit/rules.d for audit rule entries
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: ^.*path=/usr/sbin/seunshare.*$
    patterns: '*.rules'
  register: find_seunshare
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83746-8
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_seunshare
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use /etc/audit/rules.d/privileged.rules as the recipient for the rule
  set_fact:
    all_files:
      - /etc/audit/rules.d/privileged.rules
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_seunshare.matched is defined and find_seunshare.matched == 0
  tags:
    - CCE-83746-8
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_seunshare
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Use matched file as the recipient for the rule
  set_fact:
    all_files:
      - '{{ find_seunshare.files | map(attribute=''path'') | list | first }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - find_seunshare.matched is defined and find_seunshare.matched > 0
  tags:
    - CCE-83746-8
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_seunshare
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Inserts/replaces the seunshare rule in rules.d
  lineinfile:
    path: '{{ all_files[0] }}'
    line: -a always,exit -F path=/usr/sbin/seunshare -F auid>=1000 -F auid!=unset
      -F key=privileged
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83746-8
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_seunshare
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Inserts/replaces the seunshare rule in audit.rules
  lineinfile:
    path: /etc/audit/audit.rules
    line: -a always,exit -F path=/usr/sbin/seunshare -F auid>=1000 -F auid!=unset
      -F key=privileged
    create: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83746-8
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - audit_rules_execution_seunshare
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
Group   Record Unauthorized Access Attempts Events to Files (unsuccessful)   Group contains 1 rule
[ref]   At a minimum, the audit system should collect unauthorized file accesses for all users and root. Note that the "-F arch=b32" lines should be present even on a 64 bit system. These commands identify system calls for auditing. Even if the system is 64 bit it can still execute 32 bit system calls. Additionally, these rules can be configured in a number of ways while still achieving the desired effect. An example of this is that the "-S" calls could be split up and placed on separate lines, however, this is less efficient. Add the following to /etc/audit/audit.rules:
-a always,exit -F arch=b32 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
    -a always,exit -F arch=b32 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If your system is 64 bit then these lines should be duplicated and the arch=b32 replaced with arch=b64 as follows:
-a always,exit -F arch=b64 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
    -a always,exit -F arch=b64 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access

Rule   Ensure auditd Collects Unauthorized Access Attempts to Files (unsuccessful)   [ref]

At a minimum the audit system should collect unauthorized file accesses for all users and root. If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following lines to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b32 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the system is 64 bit then also add the following lines:
-a always,exit -F arch=b64 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b64 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following lines to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b32 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
If the system is 64 bit then also add the following lines:
-a always,exit -F arch=b64 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -F key=access
-a always,exit -F arch=b64 -S creat,open,openat,open_by_handle_at,truncate,ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -F key=access
Warning:  This rule checks for multiple syscalls related to unsuccessful file modification; it was written with DISA STIG in mind. Other policies should use a separate rule for each syscall that needs to be checked. For example:
  • audit_rules_unsuccessful_file_modification_open
  • audit_rules_unsuccessful_file_modification_ftruncate
  • audit_rules_unsuccessful_file_modification_creat
Rationale:
Unsuccessful attempts to access files could be an indicator of malicious activity on a system. Auditing these events could serve as evidence of potential system compromise.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_audit_rules_unsuccessful_file_modification
Identifiers and References

Identifiers:  CCE-83793-0

References:  1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000172, CCI-002884, 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, 0582, 0584, 05885, 0586, 0846, 0957, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, Req-10.2.4, Req-10.2.1


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# Perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do

	# First fix the -EACCES requirement
	PATTERN="-a always,exit -F arch=$ARCH -S .* -F exit=-EACCES -F auid>=1000 -F auid!=unset -k *"
	# Use escaped BRE regex to specify rule group
	GROUP="\(creat\|open\|truncate\)"
	FULL_RULE="-a always,exit -F arch=$ARCH -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EACCES -F auid>=1000 -F auid!=unset -k access"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"

	# Then fix the -EPERM requirement
	PATTERN="-a always,exit -F arch=$ARCH -S .* -F exit=-EPERM -F auid>=1000 -F auid!=unset -k *"
	# No need to change content of $GROUP variable - it's the same as for -EACCES case above
	FULL_RULE="-a always,exit -F arch=$ARCH -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EPERM -F auid>=1000 -F auid!=unset -k access"
	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
	fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
	fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"

done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Record Information on Kernel Modules Loading and Unloading   Group contains 1 rule
[ref]   To capture kernel module loading and unloading events, use following lines, setting ARCH to either b32 for 32-bit system, or having two lines for both b32 and b64 in case your system is 64-bit:
-a always,exit -F arch=ARCH -S init_module,delete_module -F key=modules
Place to add the lines depends on a way auditd daemon is configured. If it is configured to use the augenrules program (the default), add the lines to a file with suffix .rules in the directory /etc/audit/rules.d. If the auditd daemon is configured to use the auditctl utility, add the lines to file /etc/audit/audit.rules.

Rule   Ensure auditd Collects Information on Kernel Module Loading and Unloading   [ref]

To capture kernel module loading and unloading events, use following lines, setting ARCH to either b32 for 32-bit system, or having two lines for both b32 and b64 in case your system is 64-bit:
-a always,exit -F arch=ARCH -S init_module,finit_module,delete_module -F key=modules
The place to add the lines depends on a way auditd daemon is configured. If it is configured to use the augenrules program (the default), add the lines to a file with suffix .rules in the directory /etc/audit/rules.d. If the auditd daemon is configured to use the auditctl utility, add the lines to file /etc/audit/audit.rules.
Rationale:
The addition/removal of kernel modules can be used to alter the behavior of the kernel and potentially introduce malicious code into kernel space. It is important to have an audit trail of modules that have been introduced into the kernel.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_audit_rules_kernel_module_loading
Identifiers and References

Identifiers:  CCE-83804-5

References:  1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-000172, 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.4, A.16.1.5, A.16.1.7, A.6.2.1, A.6.2.2, AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, Req-10.2.7


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
# Note: 32-bit and 64-bit kernel syscall numbers not always line up =>
#       it's required on a 64-bit system to check also for the presence
#       of 32-bit's equivalent of the corresponding rule.
#       (See `man 7 audit.rules` for details )
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
        GROUP="modules"
        PATTERN="-a always,exit -F arch=$ARCH -S init_module -S delete_module -S finit_module \(-F key=\|-k \).*"
        FULL_RULE="-a always,exit -F arch=$ARCH -S init_module -S delete_module -S finit_module -k modules"
        # Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to fix syscall audit rule for given system call. It is
# based on example audit syscall rule definitions as outlined in
# /usr/share/doc/audit-2.3.7/stig.rules file provided with the audit
# package. It will combine multiple system calls belonging to the same
# syscall group into one audit rule (rather than to create audit rule per
# different system call) to avoid audit infrastructure performance penalty
# in the case of 'one-audit-rule-definition-per-one-system-call'. See:
#
#   https://www.redhat.com/archives/linux-audit/2014-November/msg00009.html
#
# for further details.
#
# Expects five arguments (each of them is required) in the form of:
# * audit tool				tool used to load audit rules,
# 					either 'auditctl', or 'augenrules
# * audit rules' pattern		audit rule skeleton for same syscall
# * syscall group			greatest common string this rule shares
# 					with other rules from the same group
# * architecture			architecture this rule is intended for
# * full form of new rule to add	expected full form of audit rule as to be
# 					added into audit.rules file
#
# Note: The 2-th up to 4-th arguments are used to determine how many existing
# audit rules will be inspected for resemblance with the new audit rule
# (5-th argument) the function is going to add. The rule's similarity check
# is performed to optimize audit.rules definition (merge syscalls of the same
# group into one rule) to avoid the "single-syscall-per-audit-rule" performance
# penalty.
#
# Example call:
#
#	See e.g. 'audit_rules_file_deletion_events.sh' remediation script
#
function fix_audit_syscall_rule {

# Load function arguments into local variables
local tool="$1"
local pattern="$2"
local group="$3"
local arch="$4"
local full_rule="$5"

# Check sanity of the input
if [ $# -ne "5" ]
then
	echo "Usage: fix_audit_syscall_rule 'tool' 'pattern' 'group' 'arch' 'full rule'"
	echo "Aborting."
	exit 1
fi

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
# 
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
declare -a files_to_inspect

retval=0

# First check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	return 1
# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect+=('/etc/audit/audit.rules' )
# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
elif [ "$tool" == 'augenrules' ]
then
	# Extract audit $key from audit rule so we can use it later
	matches=()
	key=$(expr "$full_rule" : '.*-k[[:space:]]\([^[:space:]]\+\)' '|' "$full_rule" : '.*-F[[:space:]]key=\([^[:space:]]\+\)')
	readarray -t matches < <(sed -s -n -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d;F" /etc/audit/rules.d/*.rules)
	if [ $? -ne 0 ]
	then
		retval=1
	fi
	for match in "${matches[@]}"
	do
		files_to_inspect+=("${match}")
	done
	# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
	if [ ${#files_to_inspect[@]} -eq "0" ]
	then
		file_to_inspect="/etc/audit/rules.d/$key.rules"
		files_to_inspect=("$file_to_inspect")
		if [ ! -e "$file_to_inspect" ]
		then
			touch "$file_to_inspect"
			chmod 0640 "$file_to_inspect"
		fi
	fi
fi

#
# Indicator that we want to append $full_rule into $audit_file by default
local append_expected_rule=0

for audit_file in "${files_to_inspect[@]}"
do
	# Filter existing $audit_file rules' definitions to select those that:
	# * follow the rule pattern, and
	# * meet the hardware architecture requirement, and
	# * are current syscall group specific
	readarray -t existing_rules < <(sed -e "\;${pattern};!d" -e "/${arch}/!d" -e "/${group}/!d"  "$audit_file")
	if [ $? -ne 0 ]
	then
		retval=1
	fi

	# Process rules found case-by-case
	for rule in "${existing_rules[@]}"
	do
		# Found rule is for same arch & key, but differs (e.g. in count of -S arguments)
		if [ "${rule}" != "${full_rule}" ]
		then
			# If so, isolate just '(-S \w)+' substring of that rule
			rule_syscalls=$(echo "$rule" | grep -o -P '(-S \w+ )+')
			# Check if list of '-S syscall' arguments of that rule is subset
			# of '-S syscall' list of expected $full_rule
			if grep -q -- "$rule_syscalls" <<< "$full_rule"
			then
				# Rule is covered (i.e. the list of -S syscalls for this rule is
				# subset of -S syscalls of $full_rule => existing rule can be deleted
				# Thus delete the rule from audit.rules & our array
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi
				existing_rules=("${existing_rules[@]//$rule/}")
			else
				# Rule isn't covered by $full_rule - it besides -S syscall arguments
				# for this group contains also -S syscall arguments for other syscall
				# group. Example: '-S lchown -S fchmod -S fchownat' => group='chown'
				# since 'lchown' & 'fchownat' share 'chown' substring
				# Therefore:
				# * 1) delete the original rule from audit.rules
				# (original '-S lchown -S fchmod -S fchownat' rule would be deleted)
				# * 2) delete the -S syscall arguments for this syscall group, but
				# keep those not belonging to this syscall group
				# (original '-S lchown -S fchmod -S fchownat' would become '-S fchmod'
				# * 3) append the modified (filtered) rule again into audit.rules
				# if the same rule not already present
				#
				# 1) Delete the original rule
				sed -i -e "\;${rule};d" "$audit_file"
				if [ $? -ne 0 ]
				then
					retval=1
				fi

				# 2) Delete syscalls for this group, but keep those from other groups
				# Convert current rule syscall's string into array splitting by '-S' delimiter
				IFS_BKP="$IFS"
				IFS=$'-S'
				read -a rule_syscalls_as_array <<< "$rule_syscalls"
				# Reset IFS back to default
				IFS="$IFS_BKP"
				# Splitting by "-S" can't be replaced by the readarray functionality easily

				# Declare new empty string to hold '-S syscall' arguments from other groups
				new_syscalls_for_rule=''
				# Walk through existing '-S syscall' arguments
				for syscall_arg in "${rule_syscalls_as_array[@]}"
				do
					# Skip empty $syscall_arg values
					if [ "$syscall_arg" == '' ]
					then
						continue
					fi
					# If the '-S syscall' doesn't belong to current group add it to the new list
					# (together with adding '-S' delimiter back for each of such item found)
					if grep -q -v -- "$group" <<< "$syscall_arg"
					then
						new_syscalls_for_rule="$new_syscalls_for_rule -S $syscall_arg"
					fi
				done
				# Replace original '-S syscall' list with the new one for this rule
				updated_rule=${rule//$rule_syscalls/$new_syscalls_for_rule}
				# Squeeze repeated whitespace characters in rule definition (if any) into one
				updated_rule=$(echo "$updated_rule" | tr -s '[:space:]')
				# 3) Append the modified / filtered rule again into audit.rules
				#    (but only in case it's not present yet to prevent duplicate definitions)
				if ! grep -q -- "$updated_rule" "$audit_file"
				then
					echo "$updated_rule" >> "$audit_file"
				fi
			fi
		else
			# $audit_file already contains the expected rule form for this
			# architecture & key => don't insert it second time
			append_expected_rule=1
		fi
	done

	# We deleted all rules that were subset of the expected one for this arch & key.
	# Also isolated rules containing system calls not from this system calls group.
	# Now append the expected rule if it's not present in $audit_file yet
	if [[ ${append_expected_rule} -eq "0" ]]
	then
		echo "$full_rule" >> "$audit_file"
	fi
done

return $retval

}
        fix_audit_syscall_rule "auditctl" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
        fix_audit_syscall_rule "augenrules" "$PATTERN" "$GROUP" "$ARCH" "$FULL_RULE"
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Reboot:true
Strategy:restrict
- name: Set architecture for audit tasks
  set_fact:
    audit_arch: b{{ ansible_architecture | regex_replace('.*(\d\d$)','\1') }}
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83804-5
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.7
    - audit_rules_kernel_module_loading
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Perform remediation of Audit rules for kernel module loading for x86 platform
  block:

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - init_module
          - delete_module
          - finit_module

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b32 in /etc/audit/rules.d/
      find:
        paths: /etc/audit/rules.d
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: '*.rules'
      register: audit_syscalls_found_b32_rules_d
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b32 in /etc/audit/rules.d/
      set_fact: audit_syscalls_matched_b32_rules_d="{{ audit_syscalls_found_b32_rules_d.results|sum(attribute='matched')|int
        }}"

    - name: Search /etc/audit/rules.d for other rules with the key modules
      find:
        paths: /etc/audit/rules.d
        contains: ^.*(?:-F key=|-k\s+)modules$
        patterns: '*.rules'
      register: find_syscalls_files

    - name: Use /etc/audit/rules.d/modules.rules as the recipient for the rule
      set_fact:
        all_files:
          - /etc/audit/rules.d/modules.rules
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        == 0

    - name: Use matched file as the recipient for the rule
      set_fact:
        all_files:
          - '{{ find_syscalls_files.files | map(attribute=''path'') | list | first
            }}'
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        > 0

    - name: Insert the syscall rule in {{ all_files[0] }}
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b32"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b32_rules_d.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -k modules' }}"

        - name: Insert the line in {{ all_files[0] }}
          lineinfile:
            path: '{{ all_files[0] }}'
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b32_rules_d < audit_syscalls_number_of_syscalls

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - init_module
          - delete_module
          - finit_module

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b32 in /etc/audit/audit.rules
      find:
        paths: /etc/audit
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b32[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: audit.rules
      register: audit_syscalls_found_b32_audit_rules
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b32 in /etc/audit/audit.rules
      set_fact: audit_syscalls_matched_b32_audit_rules="{{ audit_syscalls_found_b32_audit_rules.results|sum(attribute='matched')|int
        }}"

    - name: Insert the syscall rule in /etc/audit/audit.rules
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b32"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b32_audit_rules.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -k modules' }}"

        - name: Insert the line in /etc/audit/audit.rules
          lineinfile:
            path: /etc/audit/audit.rules
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b32_audit_rules < audit_syscalls_number_of_syscalls
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83804-5
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.7
    - audit_rules_kernel_module_loading
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy

- name: Perform remediation of Audit rules for kernel module loading for x86_64 platform
  block:

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - init_module
          - delete_module
          - finit_module

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b64 in /etc/audit/rules.d/
      find:
        paths: /etc/audit/rules.d
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: '*.rules'
      register: audit_syscalls_found_b64_rules_d
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b64 in /etc/audit/rules.d/
      set_fact: audit_syscalls_matched_b64_rules_d="{{ audit_syscalls_found_b64_rules_d.results|sum(attribute='matched')|int
        }}"

    - name: Search /etc/audit/rules.d for other rules with the key modules
      find:
        paths: /etc/audit/rules.d
        contains: ^.*(?:-F key=|-k\s+)modules$
        patterns: '*.rules'
      register: find_syscalls_files

    - name: Use /etc/audit/rules.d/modules.rules as the recipient for the rule
      set_fact:
        all_files:
          - /etc/audit/rules.d/modules.rules
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        == 0

    - name: Use matched file as the recipient for the rule
      set_fact:
        all_files:
          - '{{ find_syscalls_files.files | map(attribute=''path'') | list | first
            }}'
      when: find_syscalls_files.matched is defined and find_syscalls_files.matched
        > 0

    - name: Insert the syscall rule in {{ all_files[0] }}
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b64"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b64_rules_d.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -k modules' }}"

        - name: Insert the line in {{ all_files[0] }}
          lineinfile:
            path: '{{ all_files[0] }}'
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b64_rules_d < audit_syscalls_number_of_syscalls

    - name: Declare list of syscals
      set_fact:
        syscalls:
          - init_module
          - delete_module
          - finit_module

    - name: Declare number of syscalls
      set_fact: audit_syscalls_number_of_syscalls="{{ syscalls|length|int }}"

    - name: Check existence of syscalls for architecture b64 in /etc/audit/audit.rules
      find:
        paths: /etc/audit
        contains: ^[\s]*-a[\s]+always,exit[\s]+(?:.*-F[\s]+arch=b64[\s]+)(?:.*(-S[\s]+{{
          item }}[\s]+|([\s]+|[,]){{ item }}([\s]+|[,]))).*(-k[\s]+|-F[\s]+key=)[\S]+[\s]*$
        patterns: audit.rules
      register: audit_syscalls_found_b64_audit_rules
      loop: '{{ syscalls }}'

    - name: Get number of matched syscalls for architecture b64 in /etc/audit/audit.rules
      set_fact: audit_syscalls_matched_b64_audit_rules="{{ audit_syscalls_found_b64_audit_rules.results|sum(attribute='matched')|int
        }}"

    - name: Insert the syscall rule in /etc/audit/audit.rules
      block:

        - name: 'Construct rule: add rule list, action and arch'
          set_fact: tmpline="-a always,exit -F arch=b64"

        - name: 'Construct rule: add syscalls'
          set_fact: tmpline="{{ tmpline + ' -S ' + item.item }}"
          loop: '{{ audit_syscalls_found_b64_audit_rules.results }}'
          when: item.matched is defined and item.matched == 0

        - name: 'Construct rule: add fields and key'
          set_fact: tmpline="{{ tmpline + ' -k modules' }}"

        - name: Insert the line in /etc/audit/audit.rules
          lineinfile:
            path: /etc/audit/audit.rules
            line: '{{ tmpline }}'
            create: true
            state: present
      when: audit_syscalls_matched_b64_audit_rules < audit_syscalls_number_of_syscalls
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - audit_arch == "b64"
  tags:
    - CCE-83804-5
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.7
    - audit_rules_kernel_module_loading
    - low_complexity
    - low_disruption
    - medium_severity
    - reboot_required
    - restrict_strategy
Group   Record Attempts to Alter Logon and Logout Events   Group contains 4 rules
Group   Record Information on the Use of Privileged Commands   Group contains 1 rule
[ref]   At a minimum, the audit system should collect the execution of privileged commands for all users and root.

Rule   Ensure auditd Collects Information on the Use of Privileged Commands   [ref]

The audit system should collect information about usage of privileged commands for all users and root. To find the relevant setuid / setgid programs, run the following command for each local partition PART:
$ sudo find PART -xdev -type f -perm -4000 -o -type f -perm -2000 2>/dev/null
If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add a line of the following form to a file with suffix .rules in the directory /etc/audit/rules.d for each setuid / setgid program on the system, replacing the SETUID_PROG_PATH part with the full path of that setuid / setgid program in the list:
-a always,exit -F path=SETUID_PROG_PATH -F auid>=1000 -F auid!=unset -F key=privileged
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add a line of the following form to /etc/audit/audit.rules for each setuid / setgid program on the system, replacing the SETUID_PROG_PATH part with the full path of that setuid / setgid program in the list:
-a always,exit -F path=SETUID_PROG_PATH -F auid>=1000 -F auid!=unset -F key=privileged
Warning:  This rule checks for multiple syscalls related to privileged commands; it was written with DISA STIG in mind. Other policies should use a separate rule for each syscall that needs to be checked. For example:
  • audit_rules_privileged_commands_su
  • audit_rules_privileged_commands_umount
  • audit_rules_privileged_commands_passwd
Rationale:
Misuse of privileged functions, either intentionally or unintentionally by authorized users, or by unauthorized external entities that have compromised system accounts, is a serious and ongoing concern and can have significant adverse impacts on organizations. Auditing the use of privileged functions is one way to detect such misuse and identify the risk from insider and advanced persistent threats.

Privileged programs are subject to escalation-of-privilege attacks, which attempt to subvert their normal role of providing some necessary but limited capability. As such, motivation exists to monitor these programs for unusual activity.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_audit_rules_privileged_commands
Identifiers and References

Identifiers:  CCE-83759-1

References:  1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO08.04, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.05, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-002234, 4.2.3.10, 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.3.6.6, 4.3.4.4.7, 4.3.4.5.5, 4.3.4.5.6, 4.3.4.5.7, 4.3.4.5.8, 4.3.4.5.9, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.13, SR 2.10, SR 2.11, SR 2.12, SR 2.6, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 3.9, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.1, SR 6.2, SR 7.1, SR 7.6, 0582, 0584, 05885, 0586, 0846, 0957, A.11.2.6, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.7, A.15.2.1, A.15.2.2, A.16.1.1, A.16.1.2, A.16.1.3, A.16.1.4, A.16.1.5, A.16.1.7, A.6.1.3, A.6.2.1, A.6.2.2, CIP-004-3 R2.2.2, CIP-004-3 R2.2.3, CIP-007-3 R.1.3, CIP-007-3 R5, CIP-007-3 R5.1.1, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3, AC-2(4), AU-2(d), AU-12(c), AC-6(9), CM-6(a), DE.AE-2, DE.AE-3, DE.AE-5, DE.CM-1, DE.CM-3, DE.CM-7, DE.DP-4, ID.SC-4, PR.AC-3, PR.PT-1, PR.PT-4, RS.AN-1, RS.AN-4, RS.CO-2, Req-10.2.2, SRG-OS-000327-GPOS-00127, SRG-OS-000471-VMM-001910


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then



# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
# Function to perform remediation for 'audit_rules_privileged_commands' rule
#
# Expects two arguments:
#
# audit_tool		tool used to load audit rules
# 			One of 'auditctl' or 'augenrules'
#
# min_auid		Minimum original ID the user logged in with
#
# Example Call(s):
#
#      perform_audit_rules_privileged_commands_remediation "auditctl" "500"
#      perform_audit_rules_privileged_commands_remediation "augenrules"	"1000"
#
function perform_audit_rules_privileged_commands_remediation {
#
# Load function arguments into local variables
local tool="$1"
local min_auid="$2"

# Check sanity of the input
if [ $# -ne "2" ]
then
	echo "Usage: perform_audit_rules_privileged_commands_remediation 'auditctl | augenrules' '500 | 1000'"
	echo "Aborting."
	exit 1
fi

declare -a files_to_inspect=()

# Check sanity of the specified audit tool
if [ "$tool" != 'auditctl' ] && [ "$tool" != 'augenrules' ]
then
	echo "Unknown audit rules loading tool: $1. Aborting."
	echo "Use either 'auditctl' or 'augenrules'!"
	exit 1
# If the audit tool is 'auditctl', then:
# * add '/etc/audit/audit.rules'to the list of files to be inspected,
# * specify '/etc/audit/audit.rules' as the output audit file, where
#   missing rules should be inserted
elif [ "$tool" == 'auditctl' ]
then
	files_to_inspect=("/etc/audit/audit.rules")
	output_audit_file="/etc/audit/audit.rules"
#
# If the audit tool is 'augenrules', then:
# * add '/etc/audit/rules.d/*.rules' to the list of files to be inspected
#   (split by newline),
# * specify /etc/audit/rules.d/privileged.rules' as the output file, where
#   missing rules should be inserted
elif [ "$tool" == 'augenrules' ]
then
	readarray -t files_to_inspect < <(find /etc/audit/rules.d -maxdepth 1 -type f -name '*.rules' -print)
	output_audit_file="/etc/audit/rules.d/privileged.rules"
fi

# Obtain the list of SUID/SGID binaries on the particular system (split by newline)
# into privileged_binaries array
privileged_binaries=()
readarray -t privileged_binaries < <(find / -not \( -fstype afs -o -fstype ceph -o -fstype cifs -o -fstype smb3 -o -fstype smbfs -o -fstype sshfs -o -fstype ncpfs -o -fstype ncp -o -fstype nfs -o -fstype nfs4 -o -fstype gfs -o -fstype gfs2 -o -fstype glusterfs -o -fstype gpfs -o -fstype pvfs2 -o -fstype ocfs2 -o -fstype lustre -o -fstype davfs -o -fstype fuse.sshfs \) -type f \( -perm -4000 -o -perm -2000 \) 2> /dev/null)

# Keep list of SUID/SGID binaries that have been already handled within some previous iteration
declare -a sbinaries_to_skip=()

# For each found sbinary in privileged_binaries list
for sbinary in "${privileged_binaries[@]}"
do

	# Check if this sbinary wasn't already handled in some of the previous sbinary iterations
	# Return match only if whole sbinary definition matched (not in the case just prefix matched!!!)
	if [[ $(sed -ne "\|${sbinary}|p" <<< "${sbinaries_to_skip[*]}") ]]
	then
		# If so, don't process it second time & go to process next sbinary
		continue
	fi

	# Reset the counter of inspected files when starting to check
	# presence of existing audit rule for new sbinary
	local count_of_inspected_files=0

	# Define expected rule form for this binary
	expected_rule="-a always,exit -F path=${sbinary} -F auid>=${min_auid} -F auid!=unset -F key=privileged"

	# If list of audit rules files to be inspected is empty, just add new rule and move on to next binary
	if [[ ${#files_to_inspect[@]} -eq 0 ]]; then
		echo "$expected_rule" >> "$output_audit_file"
		continue
	fi

	# Replace possible slash '/' character in sbinary definition so we could use it in sed expressions below
	sbinary_esc=${sbinary//$'/'/$'\/'}

	# For each audit rules file from the list of files to be inspected
	for afile in "${files_to_inspect[@]}"
	do

		# Search current audit rules file's content for match. Match criteria:
		# * existing rule is for the same SUID/SGID binary we are currently processing (but
		#   can contain multiple -F path= elements covering multiple SUID/SGID binaries)
		# * existing rule contains all arguments from expected rule form (though can contain
		#   them in arbitrary order)
	
		base_search=$(sed -e '/-a always,exit/!d' -e '/-F path='"${sbinary_esc}"'[^[:graph:]]/!d'		\
				-e '/-F path=[^[:space:]]\+/!d'						\
				-e '/-F auid>='"${min_auid}"'/!d' -e '/-F auid!=\(4294967295\|unset\)/!d'	\
				-e '/-k \|-F key=/!d' "$afile")

		# Increase the count of inspected files for this sbinary
		count_of_inspected_files=$((count_of_inspected_files + 1))


		# Search current audit rules file's content for presence of rule pattern for this sbinary
		if [[ $base_search ]]
		then

			# Current audit rules file already contains rule for this binary =>
			# Store the exact form of found rule for this binary for further processing
			concrete_rule=$base_search

			# Select all other SUID/SGID binaries possibly also present in the found rule

			readarray -t handled_sbinaries < <(grep -o -e "-F path=[^[:space:]]\+" <<< "$concrete_rule")
			handled_sbinaries=("${handled_sbinaries[@]//-F path=/}")

			# Merge the list of such SUID/SGID binaries found in this iteration with global list ignoring duplicates
			readarray -t sbinaries_to_skip < <(for i in "${sbinaries_to_skip[@]}" "${handled_sbinaries[@]}"; do echo "$i"; done | sort -du)

			# if there is a -F perm flag, remove it
			if grep -q '.*-F\s\+perm=[rwxa]\+.*' <<< "$concrete_rule"; then

				# Separate concrete_rule into three sections using hash '#'
				# sign as a delimiter around rule's permission section borders
				# note that the trailing space after perm flag is captured because there would be 
				# two consecutive spaces after joining remaining parts of the rule together
				concrete_rule="$(echo "$concrete_rule" | sed -n "s/\(.*\)\+\(-F perm=[rwax]\+\ \?\)\+/\1#\2#/p")"

				# Split concrete_rule into head, perm, and tail sections using hash '#' delimiter
				rule_head=$(cut -d '#' -f 1 <<< "$concrete_rule")
				rule_perm=$(cut -d '#' -f 2 <<< "$concrete_rule")
				rule_tail=$(cut -d '#' -f 3 <<< "$concrete_rule")

				# Remove permissions section from existing rule in the file
				sed -i "s#${rule_head}\(.*\)${rule_tail}#${rule_head}${rule_tail}#" "$afile"
			fi
		# If the required audit rule for particular sbinary wasn't found yet, insert it under following conditions:
		#
		# * in the "auditctl" mode of operation insert particular rule each time
		#   (because in this mode there's only one file -- /etc/audit/audit.rules to be inspected for presence of this rule),
		#
		# * in the "augenrules" mode of operation insert particular rule only once and only in case we have already
		#   searched all of the files from /etc/audit/rules.d/*.rules location (since that audit rule can be defined
		#   in any of those files and if not, we want it to be inserted only once into /etc/audit/rules.d/privileged.rules file)
		#
		elif [ "$tool" == "auditctl" ] || [[ "$tool" == "augenrules" && $count_of_inspected_files -eq "${#files_to_inspect[@]}" ]]
		then

			# Check if this sbinary wasn't already handled in some of the previous afile iterations
			# Return match only if whole sbinary definition matched (not in the case just prefix matched!!!)
			if [[ ! $(sed -ne "\|${sbinary}|p" <<< "${sbinaries_to_skip[*]}") ]]
			then
				# Current audit rules file's content doesn't contain expected rule for this
				# SUID/SGID binary yet => append it
				echo "$expected_rule" >> "$output_audit_file"
			fi

			continue
		fi

	done

done
}
perform_audit_rules_privileged_commands_remediation "auditctl" "1000"
perform_audit_rules_privileged_commands_remediation "augenrules" "1000"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Strategy:restrict
- name: Search for privileged commands
  shell: |
    set -o pipefail
    find / -not \( -fstype afs -o -fstype ceph -o -fstype cifs -o -fstype smb3 -o -fstype smbfs -o -fstype sshfs -o -fstype ncpfs -o -fstype ncp -o -fstype nfs -o -fstype nfs4 -o -fstype gfs -o -fstype gfs2 -o -fstype glusterfs -o -fstype gpfs -o -fstype pvfs2 -o -fstype ocfs2 -o -fstype lustre -o -fstype davfs -o -fstype fuse.sshfs \) -type f \( -perm -4000 -o -perm -2000 \) 2> /dev/null
  args:
    warn: false
    executable: /bin/bash
  check_mode: false
  register: find_result
  changed_when: false
  failed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83759-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-2(4)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.2
    - audit_rules_privileged_commands
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Search /etc/audit/rules.d for audit rule entries
  find:
    paths: /etc/audit/rules.d
    recurse: false
    contains: ^.*path={{ item }} .*$
    patterns: '*.rules'
  with_items:
    - '{{ find_result.stdout_lines }}'
  register: files_result
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83759-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-2(4)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.2
    - audit_rules_privileged_commands
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Overwrites the rule in rules.d
  lineinfile:
    path: '{{ item.1.path }}'
    line: -a always,exit -F path={{ item.0.item }} -F auid>=1000 -F auid!=unset -F
      key=privileged
    create: false
    regexp: ^.*path={{ item.0.item }} .*$
  with_subelements:
    - '{{ files_result.results }}'
    - files
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83759-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-2(4)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.2
    - audit_rules_privileged_commands
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Adds the rule in rules.d
  lineinfile:
    path: /etc/audit/rules.d/privileged.rules
    line: -a always,exit -F path={{ item.item }} -F auid>=1000 -F auid!=unset -F key=privileged
    create: true
  with_items:
    - '{{ files_result.results }}'
  when:
    - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    - files_result.results is defined and item.matched == 0
  tags:
    - CCE-83759-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-2(4)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.2
    - audit_rules_privileged_commands
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Inserts/replaces the rule in audit.rules
  lineinfile:
    path: /etc/audit/audit.rules
    line: -a always,exit -F path={{ item.item }} -F auid>=1000 -F auid!=unset -F key=privileged
    create: true
    regexp: ^.*path={{ item.item }} .*$
  with_items:
    - '{{ files_result.results }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - CCE-83759-1
    - CJIS-5.4.1.1
    - NIST-800-171-3.1.7
    - NIST-800-53-AC-2(4)
    - NIST-800-53-AC-6(9)
    - NIST-800-53-AU-12(c)
    - NIST-800-53-AU-2(d)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-10.2.2
    - audit_rules_privileged_commands
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
Group   Records Events that Modify Date and Time Information   Group contains 5 rules
[ref]   Arbitrary changes to the system time can be used to obfuscate nefarious activities in log files, as well as to confuse network services that are highly dependent upon an accurate system time. All changes to the system time should be audited.

Rule   Record attempts to alter time through adjtimex   [ref]

If the auditd daemon is configured to use the augenrules program to read audit rules during daemon startup (the default), add the following line to a file with suffix .rules in the directory /etc/audit/rules.d:
-a always,exit -F arch=b32 -S adjtimex -F key=audit_time_rules
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S adjtimex -F key=audit_time_rules
If the auditd daemon is configured to use the auditctl utility to read audit rules during daemon startup, add the following line to /etc/audit/audit.rules file:
-a always,exit -F arch=b32 -S adjtimex -F key=audit_time_rules
If the system is 64 bit then also add the following line:
-a always,exit -F arch=b64 -S adjtimex -F key=audit_time_rules
The -k option allows for the specification of a key in string form that can be used for better reporting capability through ausearch and aureport. Multiple system calls can be defined on the same line to save space if desired, but is not required. See an example of multiple combined syscalls:
-a always,exit -F arch=b64 -S adjtimex,settimeofday -F key=audit_time_rules
Rationale:
Arbitrary changes to the system time can be used to obfuscate nefarious activities in log files, as well as to confuse network services that are highly dependent upon an accurate system time (such as sshd). All changes to the system time should be audited.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_audit_rules_time_adjtimex
Identifiers and References

Identifiers:  CCE-83840-9

References:  1, 11, 12, 13, 14, 15, 16, 19, 2, 3, 4, 5, 6, 7, 8, 9, 5.4.1.1, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO12.06, APO13.01, BAI03.05, BAI08.02, DSS01.03, DSS01.04, DSS02.02, DSS02.04, DSS02.07, DSS03.01, DSS03.05, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, 3.1.7, CCI-001487, CCI-000169,