Guide to the Secure Configuration of Oracle Linux 8

with profile ANSSI-BP-028 (minimal)
This profile contains configurations that align to ANSSI-BP-028 v1.2 at the minimal hardening level. ANSSI is the French National Information Security Agency, and stands for Agence nationale de la sécurité des systèmes d'information. ANSSI-BP-028 is a configuration recommendation for GNU/Linux systems. A copy of the ANSSI-BP-028 can be found at the ANSSI website: https://www.ssi.gouv.fr/administration/guide/recommandations-de-securite-relatives-a-un-systeme-gnulinux/
This guide presents a catalog of security-relevant configuration settings for Oracle Linux 8. It is a rendering of content structured in the eXtensible Configuration Checklist Description Format (XCCDF) in order to support security automation. The SCAP content is is available in the scap-security-guide package which is developed at https://www.open-scap.org/security-policies/scap-security-guide.

Providing system administrators with such guidance informs them how to securely configure systems under their control in a variety of network roles. Policy makers and baseline creators can use this catalog of settings, with its associated references to higher-level security control catalogs, in order to assist them in security baseline creation. This guide is a catalog, not a checklist, and satisfaction of every item is not likely to be possible or sensible in many operational scenarios. However, the XCCDF format enables granular selection and adjustment of settings, and their association with OVAL and OCIL content provides an automated checking capability. Transformations of this document, and its associated automated checking content, are capable of providing baselines that meet a diverse set of policy objectives. Some example XCCDF Profiles, which are selections of items that form checklists and can be used as baselines, are available with this guide. They can be processed, in an automated fashion, with tools that support the Security Content Automation Protocol (SCAP). The DISA STIG, which provides required settings for US Department of Defense systems, is one example of a baseline created from this guidance.
Do not attempt to implement any of the settings in this guide without first testing them in a non-operational environment. The creators of this guidance assume no responsibility whatsoever for its use by other parties, and makes no guarantees, expressed or implied, about its quality, reliability, or any other characteristic.

Profile Information

Profile TitleANSSI-BP-028 (minimal)
Profile IDxccdf_org.ssgproject.content_profile_anssi_bp28_minimal

CPE Platforms

  • cpe:/o:oracle:linux:8

Revision History

Current version: 0.1.62

  • draft (as of 2022-05-27)

Table of Contents

  1. System Settings
    1. Installing and Maintaining Software
    2. Account and Access Control
    3. Configure Syslog
    4. File Permissions and Masks
  2. Services
    1. DHCP
    2. Mail Server Software
    3. Obsolete Services

Checklist

Group   Guide to the Secure Configuration of Oracle Linux 8   Group contains 27 groups and 42 rules
Group   System Settings   Group contains 15 groups and 30 rules
[ref]   Contains rules that check correct system settings.
Group   Installing and Maintaining Software   Group contains 2 groups and 11 rules
[ref]   The following sections contain information on security-relevant choices during the initial operating system installation process and the setup of software updates.
Group   Sudo   Group contains 2 rules
[ref]   Sudo, which stands for "su 'do'", provides the ability to delegate authority to certain users, groups of users, or system administrators. When configured for system users and/or groups, Sudo can allow a user or group to execute privileged commands that normally only root is allowed to execute.

For more information on Sudo and addition Sudo configuration options, see https://www.sudo.ws.

Rule   Ensure Users Re-Authenticate for Privilege Escalation - sudo !authenticate   [ref]

The sudo !authenticate option, when specified, allows a user to execute commands using sudo without having to authenticate. This should be disabled by making sure that the !authenticate option does not exist in /etc/sudoers configuration file or any sudo configuration snippets in /etc/sudoers.d/.
Rationale:
Without re-authentication, users may access resources or perform tasks for which they do not have authorization.

When operating systems provide the capability to escalate a functional capability, it is critical that the user re-authenticate.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sudo_remove_no_authenticate
Identifiers and References

References:  BP28(R5), BP28(R59), 1, 12, 15, 16, 5, DSS05.04, DSS05.10, DSS06.03, DSS06.10, CCI-002038, 4.3.3.5.1, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-11, CM-6(a), PR.AC-1, PR.AC-7, SRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157, SRG-OS-000373-GPOS-00158, SRG-OS-000373-VMM-001470, SRG-OS-000373-VMM-001480, SRG-OS-000373-VMM-001490, OL08-00-010381, SV-248582r779312_rule


Complexity:low
Disruption:low
Strategy:restrict
- name: Find /etc/sudoers.d/ files
  find:
    paths:
      - /etc/sudoers.d/
  register: sudoers
  tags:
    - DISA-STIG-OL08-00-010381
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-11
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
    - sudo_remove_no_authenticate

- name: Remove lines containing !authenticate from sudoers files
  replace:
    regexp: (^(?!#).*[\s]+\!authenticate.*$)
    replace: '# \g<1>'
    path: '{{ item.path }}'
    validate: /usr/sbin/visudo -cf %s
  with_items:
    - path: /etc/sudoers
    - '{{ sudoers.files }}'
  tags:
    - DISA-STIG-OL08-00-010381
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-11
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
    - sudo_remove_no_authenticate

Complexity:low
Disruption:low
Strategy:restrict

for f in /etc/sudoers /etc/sudoers.d/* ; do
  if [ ! -e "$f" ] ; then
    continue
  fi
  matching_list=$(grep -P '^(?!#).*[\s]+\!authenticate.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      # comment out "!authenticate" matches to preserve user data
      sed -i "s/^${entry}$/# &/g" $f
    done <<< "$matching_list"

    /usr/sbin/visudo -cf $f &> /dev/null || echo "Fail to validate $f with visudo"
  fi
done

Rule   Ensure Users Re-Authenticate for Privilege Escalation - sudo NOPASSWD   [ref]

The sudo NOPASSWD tag, when specified, allows a user to execute commands using sudo without having to authenticate. This should be disabled by making sure that the NOPASSWD tag does not exist in /etc/sudoers configuration file or any sudo configuration snippets in /etc/sudoers.d/.
Rationale:
Without re-authentication, users may access resources or perform tasks for which they do not have authorization.

When operating systems provide the capability to escalate a functional capability, it is critical that the user re-authenticate.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sudo_remove_nopasswd
Identifiers and References

References:  BP28(R5), BP28(R59), 1, 12, 15, 16, 5, DSS05.04, DSS05.10, DSS06.03, DSS06.10, CCI-002038, 4.3.3.5.1, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-11, CM-6(a), PR.AC-1, PR.AC-7, SRG-OS-000373-GPOS-00156, SRG-OS-000373-GPOS-00157, SRG-OS-000373-GPOS-00158, SRG-OS-000373-VMM-001470, SRG-OS-000373-VMM-001480, SRG-OS-000373-VMM-001490, OL08-00-010380, SV-248581r779309_rule


Complexity:low
Disruption:low
Strategy:restrict
- name: Find /etc/sudoers.d/ files
  find:
    paths:
      - /etc/sudoers.d/
  register: sudoers
  tags:
    - DISA-STIG-OL08-00-010380
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-11
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
    - sudo_remove_nopasswd

- name: Remove lines containing NOPASSWD from sudoers files
  replace:
    regexp: (^(?!#).*[\s]+NOPASSWD[\s]*\:.*$)
    replace: '# \g<1>'
    path: '{{ item.path }}'
    validate: /usr/sbin/visudo -cf %s
  with_items:
    - path: /etc/sudoers
    - '{{ sudoers.files }}'
  tags:
    - DISA-STIG-OL08-00-010380
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-11
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
    - sudo_remove_nopasswd

Complexity:low
Disruption:low
Strategy:restrict

for f in /etc/sudoers /etc/sudoers.d/* ; do
  if [ ! -e "$f" ] ; then
    continue
  fi
  matching_list=$(grep -P '^(?!#).*[\s]+NOPASSWD[\s]*\:.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      # comment out "NOPASSWD" matches to preserve user data
      sed -i "s/^${entry}$/# &/g" $f
    done <<< "$matching_list"

    /usr/sbin/visudo -cf $f &> /dev/null || echo "Fail to validate $f with visudo"
  fi
done
Group   Updating Software   Group contains 9 rules
[ref]   The yum command line tool is used to install and update software packages. The system also provides a graphical software update tool in the System menu, in the Administration submenu, called Software Update.

Oracle Linux 8 systems contain an installed software catalog called the RPM database, which records metadata of installed packages. Consistently using yum or the graphical Software Update for all software installation allows for insight into the current inventory of installed software on the system.

Rule   Install dnf-automatic Package   [ref]

The dnf-automatic package can be installed with the following command:
$ sudo yum install dnf-automatic
Rationale:
dnf-automatic is an alternative command line interface (CLI) to dnf upgrade suitable for automatic, regular execution.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_dnf-automatic_installed
Identifiers and References

References:  BP28(R8), SRG-OS-000191-GPOS-00080


Complexity:low
Disruption:low
Strategy:enable

package --add=dnf-automatic

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure dnf-automatic is installed
  package:
    name: dnf-automatic
    state: present
  tags:
    - enable_strategy
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - package_dnf-automatic_installed

Complexity:low
Disruption:low
Strategy:enable

if ! rpm -q --quiet "dnf-automatic" ; then
    yum install -y "dnf-automatic"
fi


[[packages]]
name = "dnf-automatic"
version = "*"

Complexity:low
Disruption:low
Strategy:enable
include install_dnf-automatic

class install_dnf-automatic {
  package { 'dnf-automatic':
    ensure => 'installed',
  }
}

Rule   Configure dnf-automatic to Install Available Updates Automatically   [ref]

To ensure that the packages comprising the available updates will be automatically installed by dnf-automatic, set apply_updates to yes under [commands] section in /etc/dnf/automatic.conf.
Rationale:
Installing software updates is a fundamental mitigation against the exploitation of publicly-known vulnerabilities. If the most recent security patches and updates are not installed, unauthorized users may take advantage of weaknesses in the unpatched software. The lack of prompt attention to patching could result in a system compromise. The automated installation of updates ensures that recent security patches are applied in a timely manner.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_dnf-automatic_apply_updates
Identifiers and References

References:  BP28(R8), 0940, 1144, 1467, 1472, 1483, 1493, 1494, 1495, SI-2(5), CM-6(a), SI-2(c), FMT_SMF_EXT.1, SRG-OS-000191-GPOS-00080


Complexity:low
Disruption:medium
- name: Configure dnf-automatic to Install Available Updates Automatically
  ini_file:
    dest: /etc/dnf/automatic.conf
    section: commands
    option: apply_updates
    value: 'yes'
    create: true
  tags:
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SI-2(5)
    - NIST-800-53-SI-2(c)
    - dnf-automatic_apply_updates
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
    - unknown_strategy


found=false

# set value in all files if they contain section or key
for f in $(echo -n "/etc/dnf/automatic.conf"); do
    if [ ! -e "$f" ]; then
        continue
    fi

    # find key in section and change value
    if grep -qzosP "[[:space:]]*\[commands\]([^\n\[]*\n+)+?[[:space:]]*apply_updates" "$f"; then
            sed -i "s/apply_updates[^(\n)]*/apply_updates = yes/" "$f"
            found=true

    # find section and add key = value to it
    elif grep -qs "[[:space:]]*\[commands\]" "$f"; then
            sed -i "/[[:space:]]*commands/a apply_updates = yes" "$f"
            found=true
    fi
done

# if section not in any file, append section with key = value to FIRST file in files parameter
if ! $found ; then
    file=$(echo "/etc/dnf/automatic.conf" | cut -f1 -d' ')
    mkdir -p "$(dirname "$file")"
    echo -e "[commands]\napply_updates = yes" >> "$file"
fi

Rule   Configure dnf-automatic to Install Only Security Updates   [ref]

To configure dnf-automatic to install only security updates automatically, set upgrade_type to security under [commands] section in /etc/dnf/automatic.conf.
Rationale:
By default, dnf-automatic installs all available updates. Reducing the amount of updated packages only to updates that were issued as a part of a security advisory increases the system stability.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_dnf-automatic_security_updates_only
Identifiers and References

References:  BP28(R8), SI-2(5), CM-6(a), SI-2(c), FMT_SMF_EXT.1, SRG-OS-000191-GPOS-00080


Complexity:low
Disruption:medium
- name: Configure dnf-automatic to Install Only Security Updates
  ini_file:
    dest: /etc/dnf/automatic.conf
    section: commands
    option: upgrade_type
    value: security
    create: true
  tags:
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SI-2(5)
    - NIST-800-53-SI-2(c)
    - dnf-automatic_security_updates_only
    - low_complexity
    - low_severity
    - medium_disruption
    - no_reboot_needed
    - unknown_strategy


found=false

# set value in all files if they contain section or key
for f in $(echo -n "/etc/dnf/automatic.conf"); do
    if [ ! -e "$f" ]; then
        continue
    fi

    # find key in section and change value
    if grep -qzosP "[[:space:]]*\[commands\]([^\n\[]*\n+)+?[[:space:]]*upgrade_type" "$f"; then
            sed -i "s/upgrade_type[^(\n)]*/upgrade_type = security/" "$f"
            found=true

    # find section and add key = value to it
    elif grep -qs "[[:space:]]*\[commands\]" "$f"; then
            sed -i "/[[:space:]]*commands/a upgrade_type = security" "$f"
            found=true
    fi
done

# if section not in any file, append section with key = value to FIRST file in files parameter
if ! $found ; then
    file=$(echo "/etc/dnf/automatic.conf" | cut -f1 -d' ')
    mkdir -p "$(dirname "$file")"
    echo -e "[commands]\nupgrade_type = security" >> "$file"
fi

Rule   Ensure gpgcheck Enabled In Main yum Configuration   [ref]

The gpgcheck option controls whether RPM packages' signatures are always checked prior to installation. To configure yum to check package signatures before installing them, ensure the following line appears in /etc/yum.conf in the [main] section:
gpgcheck=1
Rationale:
Changes to any software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor.
Accordingly, patches, service packs, device drivers, or operating system components must be signed with a certificate recognized and approved by the organization.
Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. Certificates used to verify the software must be from an approved Certificate Authority (CA).
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_ensure_gpgcheck_globally_activated
Identifiers and References

References:  BP28(R15), 11, 2, 3, 9, 5.10.4.1, APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02, 3.4.8, CCI-001749, 164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i), 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6, A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, CM-5(3), SI-7, SC-12, SC-12(3), CM-6(a), SA-12, SA-12(10), CM-11(a), CM-11(b), PR.DS-6, PR.DS-8, PR.IP-1, FPT_TUD_EXT.1, FPT_TUD_EXT.2, Req-6.2, SRG-OS-000366-GPOS-00153, SRG-OS-000366-VMM-001430, SRG-OS-000370-VMM-001460, SRG-OS-000404-VMM-001650, OL08-00-010370, SV-248574r779288_rule


Complexity:low
Disruption:medium
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CJIS-5.10.4.1
    - DISA-STIG-OL08-00-010370
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-11(a)
    - NIST-800-53-CM-11(b)
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SA-12
    - NIST-800-53-SA-12(10)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - configure_strategy
    - ensure_gpgcheck_globally_activated
    - high_severity
    - low_complexity
    - medium_disruption
    - no_reboot_needed

- name: Ensure GPG check is globally activated
  ini_file:
    dest: /etc/yum.conf
    section: main
    option: gpgcheck
    value: 1
    no_extra_spaces: true
    create: false
  when: '"yum" in ansible_facts.packages'
  tags:
    - CJIS-5.10.4.1
    - DISA-STIG-OL08-00-010370
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-11(a)
    - NIST-800-53-CM-11(b)
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SA-12
    - NIST-800-53-SA-12(10)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - configure_strategy
    - ensure_gpgcheck_globally_activated
    - high_severity
    - low_complexity
    - medium_disruption
    - no_reboot_needed

# Remediation is applicable only in certain platforms
if rpm --quiet -q yum; then

# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/yum.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^gpgcheck")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^gpgcheck\\>" "/etc/yum.conf"; then
    "${sed_command[@]}" "s/^gpgcheck\\>.*/$formatted_output/gi" "/etc/yum.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/yum.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure gpgcheck Enabled for Local Packages   [ref]

yum should be configured to verify the signature(s) of local packages prior to installation. To configure yum to verify signatures of local packages, set the localpkg_gpgcheck to 1 in /etc/yum.conf.
Rationale:
Changes to any software components can have significant effects to the overall security of the operating system. This requirement ensures the software has not been tampered and has been provided by a trusted vendor.

Accordingly, patches, service packs, device drivers, or operating system components must be signed with a certificate recognized and approved by the organization.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_ensure_gpgcheck_local_packages
Identifiers and References

References:  BP28(R15), 11, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, 3.4.8, CCI-001749, 164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i), 4.3.4.3.2, 4.3.4.3.3, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, CM-11(a), CM-11(b), CM-6(a), CM-5(3), SA-12, SA-12(10), PR.IP-1, FPT_TUD_EXT.1, FPT_TUD_EXT.2, SRG-OS-000366-GPOS-00153, SRG-OS-000366-VMM-001430, SRG-OS-000370-VMM-001460, SRG-OS-000404-VMM-001650, OL08-00-010371, SV-248575r779291_rule


Complexity:low
Disruption:medium
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - DISA-STIG-OL08-00-010371
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-11(a)
    - NIST-800-53-CM-11(b)
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SA-12
    - NIST-800-53-SA-12(10)
    - ensure_gpgcheck_local_packages
    - high_severity
    - low_complexity
    - medium_disruption
    - no_reboot_needed
    - unknown_strategy

- name: Ensure GPG check Enabled for Local Packages (Yum)
  ini_file:
    dest: /etc/yum.conf
    section: main
    option: localpkg_gpgcheck
    value: 1
    no_extra_spaces: true
    create: true
  when: '"yum" in ansible_facts.packages'
  tags:
    - DISA-STIG-OL08-00-010371
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-11(a)
    - NIST-800-53-CM-11(b)
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SA-12
    - NIST-800-53-SA-12(10)
    - ensure_gpgcheck_local_packages
    - high_severity
    - low_complexity
    - medium_disruption
    - no_reboot_needed
    - unknown_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q yum; then

# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/yum.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^localpkg_gpgcheck")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "1"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^localpkg_gpgcheck\\>" "/etc/yum.conf"; then
    "${sed_command[@]}" "s/^localpkg_gpgcheck\\>.*/$formatted_output/gi" "/etc/yum.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/yum.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure gpgcheck Enabled for All yum Package Repositories   [ref]

To ensure signature checking is not disabled for any repos, remove any lines from files in /etc/yum.repos.d of the form:
gpgcheck=0
Rationale:
Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. Certificates used to verify the software must be from an approved Certificate Authority (CA)."
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_ensure_gpgcheck_never_disabled
Identifiers and References

References:  BP28(R15), 11, 2, 3, 9, 5.10.4.1, APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02, 3.4.8, CCI-001749, 164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i), 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6, A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, CM-5(3), SI-7, SC-12, SC-12(3), CM-6(a), SA-12, SA-12(10), CM-11(a), CM-11(b), PR.DS-6, PR.DS-8, PR.IP-1, FPT_TUD_EXT.1, FPT_TUD_EXT.2, Req-6.2, SRG-OS-000366-GPOS-00153, SRG-OS-000366-VMM-001430, SRG-OS-000370-VMM-001460, SRG-OS-000404-VMM-001650


Complexity:low
Disruption:medium
Strategy:enable
- name: Grep for yum repo section names
  shell: |
    set -o pipefail
    grep -HEr '^\[.+\]' -r /etc/yum.repos.d/
  register: repo_grep_results
  ignore_errors: true
  changed_when: false
  tags:
    - CJIS-5.10.4.1
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-11(a)
    - NIST-800-53-CM-11(b)
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SA-12
    - NIST-800-53-SA-12(10)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - enable_strategy
    - ensure_gpgcheck_never_disabled
    - high_severity
    - low_complexity
    - medium_disruption
    - no_reboot_needed

- name: Set gpgcheck=1 for each yum repo
  ini_file:
    path: '{{ item[0] }}'
    section: '{{ item[1] }}'
    option: gpgcheck
    value: '1'
    no_extra_spaces: true
  loop: '{{ repo_grep_results.stdout | regex_findall( ''(.+\.repo):\[(.+)\]\n?'' )
    }}'
  tags:
    - CJIS-5.10.4.1
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-11(a)
    - NIST-800-53-CM-11(b)
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SA-12
    - NIST-800-53-SA-12(10)
    - NIST-800-53-SC-12
    - NIST-800-53-SC-12(3)
    - NIST-800-53-SI-7
    - PCI-DSS-Req-6.2
    - enable_strategy
    - ensure_gpgcheck_never_disabled
    - high_severity
    - low_complexity
    - medium_disruption
    - no_reboot_needed

sed -i 's/gpgcheck\s*=.*/gpgcheck=1/g' /etc/yum.repos.d/*

Rule   Ensure Oracle Linux GPG Key Installed   [ref]

To ensure the system can cryptographically verify base software packages come from Oracle (and to connect to the Unbreakable Linux Network to receive them), the Oracle GPG key must properly be installed. To install the Oracle GPG key, run:
$ sudo uln_register
If the system is not connected to the Internet, then install the Oracle GPG key from trusted media such as the Oracle installation CD-ROM or DVD. Assuming the disc is mounted in /media/cdrom, use the following command as the root user to import it into the keyring:
$ sudo rpm --import /media/cdrom/RPM-GPG-KEY-oracle
Alternatively, the key may be pre-loaded during the Oracle installation. In such cases, the key can be installed by running the following command:
sudo rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-oracle
Rationale:
Changes to software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor. The Oracle GPG key is necessary to cryptographically verify packages are from Oracle.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_ensure_oracle_gpgkey_installed
Identifiers and References

References:  11, 2, 3, 9, APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02, CCI-001749, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6, A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, CM-5(3), SI-7, SC-12, SC-12(3), CM-6(a), CM-11(a), CM-11(b), PR.DS-6, PR.DS-8, PR.IP-1, Req-6.2, 1.2.2


# OL fingerprints below retrieved from Oracle Linux Yum Server "Frequently Asked Questions"
# https://yum.oracle.com/faq.html#a10
readonly OL_RELEASE_FINGERPRINT="76FD3DB13AB67410B89DB10E82562EA9AD986DA3"
readonly OL_AUXILIARY_FINGERPRINT=""

FINGERPRINTS_REGEX="${OL_RELEASE_FINGERPRINT}"

if [[ -n "$OL_AUXILIARY_FINGERPRINT" ]]; then
    FINGERPRINTS_REGEX+="|${OL_AUXILIARY_FINGERPRINT}"
fi

# Location of the key we would like to import (once it's integrity verified)
readonly OL_RELEASE_KEY="/etc/pki/rpm-gpg/RPM-GPG-KEY-oracle"

RPM_GPG_DIR_PERMS=$(stat -c %a "$(dirname "$OL_RELEASE_KEY")")

# Verify /etc/pki/rpm-gpg directory permissions are safe
if [ "${RPM_GPG_DIR_PERMS}" -le "755" ]
then
  # If they are safe, try to obtain fingerprints from the key file
  # (to ensure there won't be e.g. CRC error)
  readarray -t GPG_OUT < <(gpg --with-fingerprint --with-colons "$OL_RELEASE_KEY" | grep "^fpr" | cut -d ":" -f 10)
  GPG_RESULT=$?
  # No CRC error, safe to proceed
  if [ "${GPG_RESULT}" -eq "0" ]
  then
    # Filter just hexadecimal fingerprints from gpg's output from
    # processing of a key file
    echo "${GPG_OUT[*]}" | grep -vE "$FINGERPRINTS_REGEX" || {
      # If $ OL_RELEASE_KEY file doesn't contain any keys with unknown fingerprint, import it
      rpm --import "${OL_RELEASE_KEY}"
    }
  fi
fi

Rule   Ensure Software Patches Installed   [ref]

If the system is joined to the ULN or a yum server, run the following command to install updates:
$ sudo yum update
If the system is not configured to use one of these sources, updates (in the form of RPM packages) can be manually downloaded from the ULN and installed using rpm.

NOTE: U.S. Defense systems are required to be patched within 30 days or sooner as local policy dictates.
Warning:  The OVAL feed of Oracle Linux 8 is not a XML file, which may not be understood by all scanners.
Rationale:
Installing software updates is a fundamental mitigation against the exploitation of publicly-known vulnerabilities. If the most recent security patches and updates are not installed, unauthorized users may take advantage of weaknesses in the unpatched software. The lack of prompt attention to patching could result in a system compromise.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_security_patches_up_to_date
Identifiers and References

References:  BP28(R08), 18, 20, 4, 5.10.4.1, APO12.01, APO12.02, APO12.03, APO12.04, BAI03.10, DSS05.01, DSS05.02, CCI-000366, CCI-001227, 4.2.3, 4.2.3.12, 4.2.3.7, 4.2.3.9, A.12.6.1, A.14.2.3, A.16.1.3, A.18.2.2, A.18.2.3, SI-2(5), SI-2(c), CM-6(a), ID.RA-1, PR.IP-12, FMT_MOF_EXT.1, Req-6.2, SRG-OS-000480-GPOS-00227, SRG-OS-000480-VMM-002000, OL08-00-010010, SV-248523r779135_rule


Complexity:low
Disruption:high
Reboot:true
Strategy:patch
- name: Security patches are up to date
  package:
    name: '*'
    state: latest
  tags:
    - CJIS-5.10.4.1
    - DISA-STIG-OL08-00-010010
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SI-2(5)
    - NIST-800-53-SI-2(c)
    - PCI-DSS-Req-6.2
    - high_disruption
    - low_complexity
    - medium_severity
    - patch_strategy
    - reboot_required
    - security_patches_up_to_date
    - skip_ansible_lint

Complexity:low
Disruption:high
Reboot:true
Strategy:patch


yum -y update

Rule   Enable dnf-automatic Timer   [ref]

The dnf-automatic timer can be enabled with the following command:
$ sudo systemctl enable dnf-automatic.timer
Rationale:
The dnf-automatic is an alternative command line interface (CLI) to dnf upgrade with specific facilities to make it suitable to be executed automatically and regularly from systemd timers, cron jobs and similar. The tool is controlled by dnf-automatic.timer SystemD timer.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_timer_dnf-automatic_enabled
Identifiers and References

References:  BP28(R8), SI-2(5), CM-6(a), SI-2(c), FMT_SMF_EXT.1, SRG-OS-000191-GPOS-00080


Complexity:low
Disruption:low
Strategy:enable
- name: Enable timer dnf-automatic
  block:

    - name: Gather the package facts
      package_facts:
        manager: auto

    - name: Enable timer dnf-automatic
      systemd:
        name: dnf-automatic.timer
        enabled: 'yes'
        state: started
      when:
        - '"dnf-automatic" in ansible_facts.packages'
  tags:
    - NIST-800-53-CM-6(a)
    - NIST-800-53-SI-2(5)
    - NIST-800-53-SI-2(c)
    - enable_strategy
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - timer_dnf-automatic_enabled

Complexity:low
Disruption:low
Strategy:enable

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" start 'dnf-automatic.timer'
"$SYSTEMCTL_EXEC" enable 'dnf-automatic.timer'
Group   Account and Access Control   Group contains 8 groups and 15 rules
[ref]   In traditional Unix security, if an attacker gains shell access to a certain login account, they can perform any action or access any file to which that account has access. Therefore, making it more difficult for unauthorized people to gain shell access to accounts, particularly to privileged accounts, is a necessary part of securing a system. This section introduces mechanisms for restricting access to accounts under Oracle Linux 8.
Group   Protect Accounts by Configuring PAM   Group contains 4 groups and 11 rules
[ref]   PAM, or Pluggable Authentication Modules, is a system which implements modular authentication for Linux programs. PAM provides a flexible and configurable architecture for authentication, and it should be configured to minimize exposure to unnecessary risk. This section contains guidance on how to accomplish that.

PAM is implemented as a set of shared objects which are loaded and invoked whenever an application wishes to authenticate a user. Typically, the application must be running as root in order to take advantage of PAM, because PAM's modules often need to be able to access sensitive stores of account information, such as /etc/shadow. Traditional privileged network listeners (e.g. sshd) or SUID programs (e.g. sudo) already meet this requirement. An SUID root application, userhelper, is provided so that programs which are not SUID or privileged themselves can still take advantage of PAM.

PAM looks in the directory /etc/pam.d for application-specific configuration information. For instance, if the program login attempts to authenticate a user, then PAM's libraries follow the instructions in the file /etc/pam.d/login to determine what actions should be taken.

One very important file in /etc/pam.d is /etc/pam.d/system-auth. This file, which is included by many other PAM configuration files, defines 'default' system authentication measures. Modifying this file is a good way to make far-reaching authentication changes, for instance when implementing a centralized authentication service.
Warning:  Be careful when making changes to PAM's configuration files. The syntax for these files is complex, and modifications can have unexpected consequences. The default configurations shipped with applications should be sufficient for most users.
Warning:  Running authconfig or system-config-authentication will re-write the PAM configuration files, destroying any manually made changes and replacing them with a series of system defaults. One reference to the configuration file syntax can be found at http://www.linux-pam.org/Linux-PAM-html/sag-configuration-file.html.
Group   Set Lockouts for Failed Password Attempts   Group contains 5 rules
[ref]   The pam_faillock PAM module provides the capability to lock out user accounts after a number of failed login attempts. Its documentation is available in /usr/share/doc/pam-VERSION/txts/README.pam_faillock.

Warning:  Locking out user accounts presents the risk of a denial-of-service attack. The lockout policy must weigh whether the risk of such a denial-of-service attack outweighs the benefits of thwarting password guessing attacks.

Rule   Limit Password Reuse   [ref]

Do not allow users to reuse recent passwords. This can be accomplished by using the remember option for the pam_unix or pam_pwhistory PAM modules.
Warning:  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report.
Rationale:
Preventing re-use of previous passwords helps ensure that a compromised password is not re-used by a user.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_unix_remember
Identifiers and References

References:  BP28(R18), 1, 12, 15, 16, 5, 5.6.2.1.1, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.5.8, CCI-000200, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(f), IA-5(1)(e), PR.AC-1, PR.AC-6, PR.AC-7, Req-8.2.5, SRG-OS-000077-GPOS-00045, SRG-OS-000077-VMM-000440


Complexity:low
Disruption:medium
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CJIS-5.6.2.1.1
    - NIST-800-171-3.5.8
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-53-IA-5(f)
    - PCI-DSS-Req-8.2.5
    - accounts_password_pam_unix_remember
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
- name: XCCDF Value var_password_pam_unix_remember # promote to variable
  set_fact:
    var_password_pam_unix_remember: !!str 2
  tags:
    - always

- name: Check if system relies on authselect
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
    - CJIS-5.6.2.1.1
    - NIST-800-171-3.5.8
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-53-IA-5(f)
    - PCI-DSS-Req-8.2.5
    - accounts_password_pam_unix_remember
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Check the integrity of the current authselect profile
  ansible.builtin.command:
    cmd: authselect check
  register: result_authselect_check_cmd
  changed_when: false
  ignore_errors: true
  when:
    - '"pam" in ansible_facts.packages'
    - result_authselect_present.stat.exists
  tags:
    - CJIS-5.6.2.1.1
    - NIST-800-171-3.5.8
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-53-IA-5(f)
    - PCI-DSS-Req-8.2.5
    - accounts_password_pam_unix_remember
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Informative message based on the authselect integrity check result
  ansible.builtin.assert:
    that:
      - result_authselect_check_cmd is success
    fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because the authselect profile is not
        intact.
      - It is not recommended to manually edit the PAM files when authselect is available
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
    success_msg:
      - authselect integrity check passed
  when: '"pam" in ansible_facts.packages'
  tags:
    - CJIS-5.6.2.1.1
    - NIST-800-171-3.5.8
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-53-IA-5(f)
    - PCI-DSS-Req-8.2.5
    - accounts_password_pam_unix_remember
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Get authselect current profile
  ansible.builtin.shell:
    cmd: authselect current -r | awk '{ print $1 }'
  register: result_authselect_profile
  changed_when: false
  when:
    - '"pam" in ansible_facts.packages'
    - result_authselect_present.stat.exists
    - result_authselect_check_cmd is success
  tags:
    - CJIS-5.6.2.1.1
    - NIST-800-171-3.5.8
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-53-IA-5(f)
    - PCI-DSS-Req-8.2.5
    - accounts_password_pam_unix_remember
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Define the current authselect profile as a local fact
  ansible.builtin.set_fact:
    authselect_current_profile: '{{ result_authselect_profile.stdout }}'
    authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
  when:
    - '"pam" in ansible_facts.packages'
    - result_authselect_profile is not skipped
    - result_authselect_profile.stdout is match("custom/")
  tags:
    - CJIS-5.6.2.1.1
    - NIST-800-171-3.5.8
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-53-IA-5(f)
    - PCI-DSS-Req-8.2.5
    - accounts_password_pam_unix_remember
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Define the new authselect custom profile as a local fact
  ansible.builtin.set_fact:
    authselect_current_profile: '{{ result_authselect_profile.stdout }}'
    authselect_custom_profile: custom/hardening
  when:
    - '"pam" in ansible_facts.packages'
    - result_authselect_profile is not skipped
    - result_authselect_profile.stdout is not match("custom/")
  tags:
    - CJIS-5.6.2.1.1
    - NIST-800-171-3.5.8
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-53-IA-5(f)
    - PCI-DSS-Req-8.2.5
    - accounts_password_pam_unix_remember
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Get authselect current features to also enable them in the custom profile
  ansible.builtin.shell:
    cmd: authselect current | tail -n+3 | awk '{ print $2 }'
  register: result_authselect_features
  changed_when: false
  when:
    - '"pam" in ansible_facts.packages'
    - result_authselect_profile is not skipped
    - authselect_current_profile is not match("custom/")
  tags:
    - CJIS-5.6.2.1.1
    - NIST-800-171-3.5.8
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-53-IA-5(f)
    - PCI-DSS-Req-8.2.5
    - accounts_password_pam_unix_remember
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Check if any custom profile with the same name was already created in the
    past
  ansible.builtin.stat:
    path: /etc/authselect/{{ authselect_custom_profile }}
  register: result_authselect_custom_profile_present
  changed_when: false
  when:
    - '"pam" in ansible_facts.packages'
    - result_authselect_present.stat.exists
    - authselect_current_profile is not match("custom/")
  tags:
    - CJIS-5.6.2.1.1
    - NIST-800-171-3.5.8
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-53-IA-5(f)
    - PCI-DSS-Req-8.2.5
    - accounts_password_pam_unix_remember
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Create a custom profile based on the current profile
  ansible.builtin.command:
    cmd: authselect create-profile hardening -b sssd
  register: result_authselect_create_profile
  when:
    - '"pam" in ansible_facts.packages'
    - result_authselect_present.stat.exists
    - result_authselect_check_cmd is success
    - authselect_current_profile is not match("custom/")
    - not result_authselect_custom_profile_present.stat.exists
  tags:
    - CJIS-5.6.2.1.1
    - NIST-800-171-3.5.8
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-53-IA-5(f)
    - PCI-DSS-Req-8.2.5
    - accounts_password_pam_unix_remember
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Ensure the desired configuration is updated in the custom profile
  ansible.builtin.replace:
    dest: '{{ item }}'
    regexp: (.*pam_pwhistory.so.*remember=)(\S+)(.*)$
    replace: \g<1>{{ var_password_pam_unix_remember }}\g<3>
  loop:
    - /etc/authselect/{{ authselect_custom_profile }}/system-auth
    - /etc/authselect/{{ authselect_custom_profile }}/password-auth
  when:
    - '"pam" in ansible_facts.packages'
    - result_authselect_profile is not skipped
    - authselect_custom_profile is match("custom/")
  tags:
    - CJIS-5.6.2.1.1
    - NIST-800-171-3.5.8
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-53-IA-5(f)
    - PCI-DSS-Req-8.2.5
    - accounts_password_pam_unix_remember
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Ensure the desired configuration in present in the custom profile
  ansible.builtin.lineinfile:
    dest: '{{ item }}'
    insertafter: ^password.*requisite.*pam_pwquality.so.*
    line: password    requisite     pam_pwhistory.so remember={{ var_password_pam_unix_remember
      }} use_authtok
  loop:
    - /etc/authselect/{{ authselect_custom_profile }}/system-auth
    - /etc/authselect/{{ authselect_custom_profile }}/password-auth
  when:
    - '"pam" in ansible_facts.packages'
    - result_authselect_profile is not skipped
    - authselect_custom_profile is match("custom/")
  tags:
    - CJIS-5.6.2.1.1
    - NIST-800-171-3.5.8
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-53-IA-5(f)
    - PCI-DSS-Req-8.2.5
    - accounts_password_pam_unix_remember
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Ensure a backup of current authselect profile before select the custom profile
  ansible.builtin.command:
    cmd: authselect apply-changes -b --backup=before-pwhistory-hardening.backup
  register: result_authselect_backup
  when:
    - '"pam" in ansible_facts.packages'
    - result_authselect_check_cmd is success
    - result_authselect_profile is not skipped
    - authselect_current_profile is not match("custom/")
    - authselect_custom_profile is not match(authselect_current_profile)
  tags:
    - CJIS-5.6.2.1.1
    - NIST-800-171-3.5.8
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-53-IA-5(f)
    - PCI-DSS-Req-8.2.5
    - accounts_password_pam_unix_remember
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Ensure the custom profile is selected
  ansible.builtin.command:
    cmd: authselect select {{ authselect_custom_profile }} --force
  register: result_pam_authselect_select_profile
  when:
    - '"pam" in ansible_facts.packages'
    - result_authselect_check_cmd is success
    - result_authselect_profile is not skipped
    - authselect_current_profile is not match("custom/")
    - authselect_custom_profile is not match(authselect_current_profile)
  tags:
    - CJIS-5.6.2.1.1
    - NIST-800-171-3.5.8
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-53-IA-5(f)
    - PCI-DSS-Req-8.2.5
    - accounts_password_pam_unix_remember
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Restore the authselect features in the custom profile
  ansible.builtin.command:
    cmd: authselect enable-feature {{ item }}
  register: result_pam_authselect_select_features
  loop: '{{ result_authselect_features.stdout_lines }}'
  when:
    - '"pam" in ansible_facts.packages'
    - result_authselect_profile is not skipped
    - result_authselect_features is not skipped
    - result_pam_authselect_select_profile is not skipped
  tags:
    - CJIS-5.6.2.1.1
    - NIST-800-171-3.5.8
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-53-IA-5(f)
    - PCI-DSS-Req-8.2.5
    - accounts_password_pam_unix_remember
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Ensure the custom profile changes are applied
  ansible.builtin.command:
    cmd: authselect apply-changes -b --backup=after-pwhistory-hardening.backup
  when:
    - '"pam" in ansible_facts.packages'
    - result_authselect_check_cmd is success
    - result_authselect_profile is not skipped
  tags:
    - CJIS-5.6.2.1.1
    - NIST-800-171-3.5.8
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-53-IA-5(f)
    - PCI-DSS-Req-8.2.5
    - accounts_password_pam_unix_remember
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Do not allow users to reuse recent passwords - system-auth (change)
  replace:
    dest: /etc/pam.d/system-auth
    regexp: ^(password\s+sufficient\s+pam_unix\.so\s.*remember\s*=\s*)(\S+)(.*)$
    replace: \g<1>{{ var_password_pam_unix_remember }}\g<3>
  when:
    - '"pam" in ansible_facts.packages'
    - not result_authselect_present.stat.exists
  tags:
    - CJIS-5.6.2.1.1
    - NIST-800-171-3.5.8
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-53-IA-5(f)
    - PCI-DSS-Req-8.2.5
    - accounts_password_pam_unix_remember
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Do not allow users to reuse recent passwords - system-auth (add)
  replace:
    dest: /etc/pam.d/system-auth
    regexp: ^password\s+sufficient\s+pam_unix\.so\s(?!.*remember\s*=\s*).*$
    replace: \g<0> remember={{ var_password_pam_unix_remember }}
  when:
    - '"pam" in ansible_facts.packages'
    - not result_authselect_present.stat.exists
  tags:
    - CJIS-5.6.2.1.1
    - NIST-800-171-3.5.8
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-53-IA-5(f)
    - PCI-DSS-Req-8.2.5
    - accounts_password_pam_unix_remember
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Do not allow users to reuse recent passwords - system-auth (change)
  replace:
    dest: /etc/pam.d/system-auth
    regexp: ^(password\s+(?:(?:requisite)|(?:required))\s+pam_pwhistory\.so\s.*remember\s*=\s*)(\S+)(.*)$
    replace: \g<1>{{ var_password_pam_unix_remember }}\g<3>
  when:
    - '"pam" in ansible_facts.packages'
    - not result_authselect_present.stat.exists
  tags:
    - CJIS-5.6.2.1.1
    - NIST-800-171-3.5.8
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-53-IA-5(f)
    - PCI-DSS-Req-8.2.5
    - accounts_password_pam_unix_remember
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Do not allow users to reuse recent passwords - system-auth (add)
  replace:
    dest: /etc/pam.d/system-auth
    regexp: ^password\s+(?:(?:requisite)|(?:required))\s+pam_pwhistory\.so\s(?!.*remember\s*=\s*).*$
    replace: \g<0> remember={{ var_password_pam_unix_remember }}
  when:
    - '"pam" in ansible_facts.packages'
    - not result_authselect_present.stat.exists
  tags:
    - CJIS-5.6.2.1.1
    - NIST-800-171-3.5.8
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-53-IA-5(f)
    - PCI-DSS-Req-8.2.5
    - accounts_password_pam_unix_remember
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_unix_remember='2'


if [ -f /usr/bin/authselect ]; then
    if authselect check; then
        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # Standard profiles delivered with authselect should not be modified.
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            # Ensure a backup before changing the profile
            authselect apply-changes -b --backup=before-pwhistory-hardening.backup
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
        fi
        # Include the desired configuration in the custom profile
        CUSTOM_SYSTEM_AUTH="/etc/authselect/$CURRENT_PROFILE/system-auth"
        CUSTOM_PASSWORD_AUTH="/etc/authselect/$CURRENT_PROFILE/password-auth"
        for custom_pam_file in $CUSTOM_SYSTEM_AUTH $CUSTOM_PASSWORD_AUTH; do
            if ! grep -q "^[^#].*pam_pwhistory.so.*remember=" $custom_pam_file; then
                sed -i --follow-symlinks "/^password.*requisite.*pam_pwquality.so/a password    requisite     pam_pwhistory.so remember=$var_password_pam_unix_remember use_authtok" $custom_pam_file
            else
                sed -i --follow-symlinks "s/\(.*pam_pwhistory.so.*remember=\)[[:digit:]]\+\s\(.*\)/\1$var_password_pam_unix_remember \2/g" $custom_pam_file
            fi
        done
        authselect apply-changes -b --backup=after-pwhistory-hardening.backup
    else
        echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because the authselect profile is not intact.
It is not recommended to manually edit the PAM files when authselect is available
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        false
    fi
else
    
    AUTH_FILES[0]="/etc/pam.d/system-auth"
    
    AUTH_FILES[1]="/etc/pam.d/password-auth"

    for pamFile in "${AUTH_FILES[@]}"; do
        if grep -q "pam_unix.so.*" $pamFile; then
            if [ -e "$pamFile" ] ; then
    valueRegex="$var_password_pam_unix_remember" defaultValue="$var_password_pam_unix_remember"
    # non-empty values need to be preceded by an equals sign
    [ -n "${valueRegex}" ] && valueRegex="=${valueRegex}"
    # add an equals sign to non-empty values
    [ -n "${defaultValue}" ] && defaultValue="=${defaultValue}"

    # fix the value for 'option' if one exists but does not match 'valueRegex'
    if grep -q -P "^\\s*password\\s+sufficient\\s+pam_unix.so(\\s.+)?\\s+remember(?"'!'"${valueRegex}(\\s|\$))" < "$pamFile" ; then
        sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+sufficient\\s+pam_unix.so(\\s.+)?\\s)remember=[^[:space:]]*/\\1remember${defaultValue}/" "$pamFile"

    # add 'option=default' if option is not set
    elif grep -q -E "^\\s*password\\s+sufficient\\s+pam_unix.so" < "$pamFile" &&
            grep    -E "^\\s*password\\s+sufficient\\s+pam_unix.so" < "$pamFile" | grep -q -E -v "\\sremember(=|\\s|\$)" ; then

        sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+sufficient\\s+pam_unix.so[^\\n]*)/\\1 remember${defaultValue}/" "$pamFile"
    # add a new entry if none exists
    elif ! grep -q -P "^\\s*password\\s+sufficient\\s+pam_unix.so(\\s.+)?\\s+remember${valueRegex}(\\s|\$)" < "$pamFile" ; then
        echo "password sufficient pam_unix.so remember${defaultValue}" >> "$pamFile"
    fi
else
    echo "$pamFile doesn't exist" >&2
fi
        fi
        if grep -q "pam_pwhistory.so.*" $pamFile; then
            if [ -e "$pamFile" ] ; then
    valueRegex="$var_password_pam_unix_remember" defaultValue="$var_password_pam_unix_remember"
    # non-empty values need to be preceded by an equals sign
    [ -n "${valueRegex}" ] && valueRegex="=${valueRegex}"
    # add an equals sign to non-empty values
    [ -n "${defaultValue}" ] && defaultValue="=${defaultValue}"

    # fix the value for 'option' if one exists but does not match 'valueRegex'
    if grep -q -P "^\\s*password\\s+required\\s+pam_pwhistory.so(\\s.+)?\\s+remember(?"'!'"${valueRegex}(\\s|\$))" < "$pamFile" ; then
        sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+required\\s+pam_pwhistory.so(\\s.+)?\\s)remember=[^[:space:]]*/\\1remember${defaultValue}/" "$pamFile"

    # add 'option=default' if option is not set
    elif grep -q -E "^\\s*password\\s+required\\s+pam_pwhistory.so" < "$pamFile" &&
            grep    -E "^\\s*password\\s+required\\s+pam_pwhistory.so" < "$pamFile" | grep -q -E -v "\\sremember(=|\\s|\$)" ; then

        sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+required\\s+pam_pwhistory.so[^\\n]*)/\\1 remember${defaultValue}/" "$pamFile"
    # add a new entry if none exists
    elif ! grep -q -P "^\\s*password\\s+required\\s+pam_pwhistory.so(\\s.+)?\\s+remember${valueRegex}(\\s|\$)" < "$pamFile" ; then
        echo "password required pam_pwhistory.so remember${defaultValue}" >> "$pamFile"
    fi
else
    echo "$pamFile doesn't exist" >&2
fi
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Lock Accounts After Failed Password Attempts   [ref]

This rule configures the system to lock out accounts after a number of incorrect login attempts using pam_faillock.so. pam_faillock.so module requires multiple entries in pam files. These entries must be carefully defined to work as expected. In order to avoid errors when manually editing these files, it is recommended to use the appropriate tools, such as authselect or authconfig, depending on the OS version.
Warning:  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. If the system supports the /etc/security/faillock.conf file, the pam_faillock parameters should be defined in faillock.conf file.
Rationale:
Locking out user accounts after a number of incorrect attempts prevents direct password guessing attacks. In combination with the silent option, user enumeration attacks are also mitigated.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny
Identifiers and References

References:  BP28(R18), 1, 12, 15, 16, 5.5.3, DSS05.04, DSS05.10, DSS06.10, 3.1.8, CCI-000044, CCI-002236, CCI-002237, CCI-002238, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, CM-6(a), AC-7(a), PR.AC-7, FIA_AFL.1, Req-8.1.6, SRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005, SRG-OS-000021-VMM-000050, OL08-00-020010, SV-248652r779522_rule


Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CJIS-5.5.3
    - DISA-STIG-OL08-00-020010
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.6
    - accounts_passwords_pam_faillock_deny
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Check if system relies on authselect
    tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
    - CJIS-5.5.3
    - DISA-STIG-OL08-00-020010
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.6
    - accounts_passwords_pam_faillock_deny
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Remediation where authselect
    tool is present
  block:

    - name: Lock Accounts After Failed Password Attempts - Check integrity of authselect
        current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      ignore_errors: true

    - name: Lock Accounts After Failed Password Attempts - Informative message based
        on the authselect integrity check result
      ansible.builtin.assert:
        that:
          - result_authselect_check_cmd is success
        fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
        success_msg:
          - authselect integrity check passed

    - name: Lock Accounts After Failed Password Attempts - Get authselect current
        features
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
        - result_authselect_check_cmd is success

    - name: Lock Accounts After Failed Password Attempts - Ensure with-faillock feature
        is enabled using authselect tool
      ansible.builtin.command:
        cmd: authselect enable-feature with-faillock
      register: result_authselect_cmd
      when:
        - result_authselect_check_cmd is success
        - result_authselect_features.stdout is not search("with-faillock")
  when:
    - '"pam" in ansible_facts.packages'
    - result_authselect_present.stat.exists
  tags:
    - CJIS-5.5.3
    - DISA-STIG-OL08-00-020010
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.6
    - accounts_passwords_pam_faillock_deny
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Remediation where authselect
    tool is not present
  block:

    - name: Lock Accounts After Failed Password Attempts - Check if pam_faillock.so
        is already enabled
      ansible.builtin.lineinfile:
        path: /etc/pam.d/system-auth
        regexp: .*auth.*pam_faillock.so (preauth|authfail)
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_faillock_is_enabled

    - name: Lock Accounts After Failed Password Attempts - Enable pam_faillock.so
        preauth editing PAM files
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        line: auth        required      pam_faillock.so preauth
        insertbefore: ^auth.*sufficient.*pam_unix.so.*
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_is_enabled.found == 0

    - name: Lock Accounts After Failed Password Attempts - Enable pam_faillock.so
        authfail editing PAM files
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        line: auth        required      pam_faillock.so authfail
        insertafter: ^auth.*sufficient.*pam_unix.so.*
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_is_enabled.found == 0

    - name: Lock Accounts After Failed Password Attempts - Enable pam_faillock.so
        account section editing PAM files
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        line: account     required      pam_faillock.so
        insertbefore: ^account.*required.*pam_unix.so.*
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_is_enabled.found == 0
  when:
    - '"pam" in ansible_facts.packages'
    - not result_authselect_present.stat.exists
  tags:
    - CJIS-5.5.3
    - DISA-STIG-OL08-00-020010
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.6
    - accounts_passwords_pam_faillock_deny
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
- name: XCCDF Value var_accounts_passwords_pam_faillock_deny # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_deny: !!str 3
  tags:
    - always

- name: Lock Accounts After Failed Password Attempts - Check the presence of /etc/security/faillock.conf
    file
  ansible.builtin.stat:
    path: /etc/security/faillock.conf
  register: result_faillock_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
    - CJIS-5.5.3
    - DISA-STIG-OL08-00-020010
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.6
    - accounts_passwords_pam_faillock_deny
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Ensure the pam_faillock.so
    deny parameter in /etc/security/faillock.conf
  ansible.builtin.lineinfile:
    path: /etc/security/faillock.conf
    regexp: ^\s*deny\s*=
    line: deny = {{ var_accounts_passwords_pam_faillock_deny }}
    state: present
  when:
    - '"pam" in ansible_facts.packages'
    - result_faillock_conf_check.stat.exists
  tags:
    - CJIS-5.5.3
    - DISA-STIG-OL08-00-020010
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.6
    - accounts_passwords_pam_faillock_deny
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Lock Accounts After Failed Password Attempts - Ensure the pam_faillock.so
    deny parameter in PAM files
  block:

    - name: Lock Accounts After Failed Password Attempts - Check if pam_faillock.so
        deny parameter is already enabled in pam files
      ansible.builtin.lineinfile:
        path: /etc/pam.d/system-auth
        regexp: .*auth.*pam_faillock.so (preauth|authfail).*deny
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_faillock_deny_parameter_is_present

    - name: Lock Accounts After Failed Password Attempts - Ensure the inclusion of
        pam_faillock.so preauth deny parameter in auth section
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        backrefs: true
        regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)
        line: \1required\3 deny={{ var_accounts_passwords_pam_faillock_deny }}
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_deny_parameter_is_present.found == 0

    - name: Lock Accounts After Failed Password Attempts - Ensure the inclusion of
        pam_faillock.so authfail deny parameter in auth section
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        backrefs: true
        regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)
        line: \1required\3 deny={{ var_accounts_passwords_pam_faillock_deny }}
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_deny_parameter_is_present.found == 0

    - name: Lock Accounts After Failed Password Attempts - Ensure the desired value
        for pam_faillock.so preauth deny parameter in auth section
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        backrefs: true
        regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)(deny)=[0-9]+(.*)
        line: \1required\3\4={{ var_accounts_passwords_pam_faillock_deny }}\5
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_deny_parameter_is_present.found > 0

    - name: Lock Accounts After Failed Password Attempts - Ensure the desired value
        for pam_faillock.so authfail deny parameter in auth section
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        backrefs: true
        regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)(deny)=[0-9]+(.*)
        line: \1required\3\4={{ var_accounts_passwords_pam_faillock_deny }}\5
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_deny_parameter_is_present.found > 0
  when:
    - '"pam" in ansible_facts.packages'
    - not result_faillock_conf_check.stat.exists
  tags:
    - CJIS-5.5.3
    - DISA-STIG-OL08-00-020010
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.6
    - accounts_passwords_pam_faillock_deny
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_accounts_passwords_pam_faillock_deny='3'


if [ -f /usr/bin/authselect ]; then
    if authselect check; then
    authselect enable-feature with-faillock
    authselect apply-changes
else
    echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
    false
fi
else
    AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix.so.*/a auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock.so)/\1required     \3/g' "$pam_file"
done
fi
FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ]; then
    regex="^\s*deny\s*="
    line="deny = $var_accounts_passwords_pam_faillock_deny"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's/^\s*\(deny\s*=\s*\)\([0-9]\+\)/\1'"$var_accounts_passwords_pam_faillock_deny"'/g' $FAILLOCK_CONF
    fi
else
    AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock.so (preauth|authfail).*deny' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock.so.*preauth.*silent.*/ s/$/ deny='"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock.so.*authfail.*/ s/$/ deny='"$var_accounts_passwords_pam_faillock_deny"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock.so.*preauth.*silent.*\)\('"deny"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_deny"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock.so.*authfail.*\)\('"deny"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_deny"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Configure the root Account for Failed Password Attempts   [ref]

This rule configures the system to lock out the root account after a number of incorrect login attempts using pam_faillock.so. pam_faillock.so module requires multiple entries in pam files. These entries must be carefully defined to work as expected. In order to avoid errors when manually editing these files, it is recommended to use the appropriate tools, such as authselect or authconfig, depending on the OS version.
Warning:  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. If the system supports the /etc/security/faillock.conf file, the pam_faillock parameters should be defined in faillock.conf file.
Rationale:
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, also known as brute-forcing, is reduced. Limits are imposed by locking the account.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_deny_root
Identifiers and References

References:  BP28(R18), 1, 12, 15, 16, DSS05.04, DSS05.10, DSS06.10, CCI-002238, CCI-000044, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, CM-6(a), AC-7(b), IA-5(c), PR.AC-7, FMT_MOF_EXT.1, SRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005, OL08-00-020022, SV-248664r779558_rule


Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - DISA-STIG-OL08-00-020022
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(c)
    - accounts_passwords_pam_faillock_deny_root
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Configure the root Account for Failed Password Attempts - Check if system
    relies on authselect tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
    - DISA-STIG-OL08-00-020022
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(c)
    - accounts_passwords_pam_faillock_deny_root
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Configure the root Account for Failed Password Attempts - Remediation where
    authselect tool is present
  block:

    - name: Configure the root Account for Failed Password Attempts - Check integrity
        of authselect current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      ignore_errors: true

    - name: Configure the root Account for Failed Password Attempts - Informative
        message based on the authselect integrity check result
      ansible.builtin.assert:
        that:
          - result_authselect_check_cmd is success
        fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
        success_msg:
          - authselect integrity check passed

    - name: Configure the root Account for Failed Password Attempts - Get authselect
        current features
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
        - result_authselect_check_cmd is success

    - name: Configure the root Account for Failed Password Attempts - Ensure with-faillock
        feature is enabled using authselect tool
      ansible.builtin.command:
        cmd: authselect enable-feature with-faillock
      register: result_authselect_cmd
      when:
        - result_authselect_check_cmd is success
        - result_authselect_features.stdout is not search("with-faillock")
  when:
    - '"pam" in ansible_facts.packages'
    - result_authselect_present.stat.exists
  tags:
    - DISA-STIG-OL08-00-020022
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(c)
    - accounts_passwords_pam_faillock_deny_root
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Configure the root Account for Failed Password Attempts - Remediation where
    authselect tool is not present
  block:

    - name: Configure the root Account for Failed Password Attempts - Check if pam_faillock.so
        is already enabled
      ansible.builtin.lineinfile:
        path: /etc/pam.d/system-auth
        regexp: .*auth.*pam_faillock.so (preauth|authfail)
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_faillock_is_enabled

    - name: Configure the root Account for Failed Password Attempts - Enable pam_faillock.so
        preauth editing PAM files
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        line: auth        required      pam_faillock.so preauth
        insertbefore: ^auth.*sufficient.*pam_unix.so.*
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_is_enabled.found == 0

    - name: Configure the root Account for Failed Password Attempts - Enable pam_faillock.so
        authfail editing PAM files
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        line: auth        required      pam_faillock.so authfail
        insertafter: ^auth.*sufficient.*pam_unix.so.*
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_is_enabled.found == 0

    - name: Configure the root Account for Failed Password Attempts - Enable pam_faillock.so
        account section editing PAM files
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        line: account     required      pam_faillock.so
        insertbefore: ^account.*required.*pam_unix.so.*
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_is_enabled.found == 0
  when:
    - '"pam" in ansible_facts.packages'
    - not result_authselect_present.stat.exists
  tags:
    - DISA-STIG-OL08-00-020022
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(c)
    - accounts_passwords_pam_faillock_deny_root
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Configure the root Account for Failed Password Attempts - Check the presence
    of /etc/security/faillock.conf file
  ansible.builtin.stat:
    path: /etc/security/faillock.conf
  register: result_faillock_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
    - DISA-STIG-OL08-00-020022
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(c)
    - accounts_passwords_pam_faillock_deny_root
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Configure the root Account for Failed Password Attempts - Ensure the pam_faillock.so
    even_deny_root parameter in /etc/security/faillock.conf
  ansible.builtin.lineinfile:
    path: /etc/security/faillock.conf
    regexp: ^\s*even_deny_root
    line: even_deny_root
    state: present
  when:
    - '"pam" in ansible_facts.packages'
    - result_faillock_conf_check.stat.exists
  tags:
    - DISA-STIG-OL08-00-020022
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(c)
    - accounts_passwords_pam_faillock_deny_root
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Configure the root Account for Failed Password Attempts - Ensure the pam_faillock.so
    even_deny_root parameter in PAM files
  block:

    - name: Configure the root Account for Failed Password Attempts - Check if pam_faillock.so
        even_deny_root parameter is already enabled in pam files
      ansible.builtin.lineinfile:
        path: /etc/pam.d/system-auth
        regexp: .*auth.*pam_faillock.so (preauth|authfail).*even_deny_root
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_faillock_even_deny_root_parameter_is_present

    - name: Configure the root Account for Failed Password Attempts - Ensure the inclusion
        of pam_faillock.so preauth even_deny_root parameter in auth section
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        backrefs: true
        regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)
        line: \1required\3 even_deny_root
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_even_deny_root_parameter_is_present.found == 0

    - name: Configure the root Account for Failed Password Attempts - Ensure the inclusion
        of pam_faillock.so authfail even_deny_root parameter in auth section
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        backrefs: true
        regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)
        line: \1required\3 even_deny_root
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_even_deny_root_parameter_is_present.found == 0
  when:
    - '"pam" in ansible_facts.packages'
    - not result_faillock_conf_check.stat.exists
  tags:
    - DISA-STIG-OL08-00-020022
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(c)
    - accounts_passwords_pam_faillock_deny_root
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

if [ -f /usr/bin/authselect ]; then
    if authselect check; then
    authselect enable-feature with-faillock
    authselect apply-changes
else
    echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
    false
fi
else
    AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix.so.*/a auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock.so)/\1required     \3/g' "$pam_file"
done
fi
FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ]; then
    regex="^\s*even_deny_root"
    line="even_deny_root"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    fi
else
    AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock.so (preauth|authfail).*even_deny_root' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock.so.*preauth.*silent.*/ s/$/ even_deny_root/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock.so.*authfail.*/ s/$/ even_deny_root/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set Interval For Counting Failed Password Attempts   [ref]

Utilizing pam_faillock.so, the fail_interval directive configures the system to lock out an account after a number of incorrect login attempts within a specified time period.
Warning:  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. If the system supports the /etc/security/faillock.conf file, the pam_faillock parameters should be defined in faillock.conf file.
Rationale:
By limiting the number of failed logon attempts the risk of unauthorized system access via user password guessing, otherwise known as brute-forcing, is reduced. Limits are imposed by locking the account.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_interval
Identifiers and References

References:  BP28(R18), 1, 12, 15, 16, DSS05.04, DSS05.10, DSS06.10, CCI-000044, CCI-002236, CCI-002237, CCI-002238, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, CM-6(a), AC-7(a), PR.AC-7, FIA_AFL.1, SRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005, SRG-OS-000021-VMM-000050, OL08-00-020012, SV-248654r779528_rule


Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - DISA-STIG-OL08-00-020012
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - accounts_passwords_pam_faillock_interval
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Set Interval For Counting Failed Password Attempts - Check if system relies
    on authselect tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
    - DISA-STIG-OL08-00-020012
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - accounts_passwords_pam_faillock_interval
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Set Interval For Counting Failed Password Attempts - Remediation where authselect
    tool is present
  block:

    - name: Set Interval For Counting Failed Password Attempts - Check integrity of
        authselect current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      ignore_errors: true

    - name: Set Interval For Counting Failed Password Attempts - Informative message
        based on the authselect integrity check result
      ansible.builtin.assert:
        that:
          - result_authselect_check_cmd is success
        fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
        success_msg:
          - authselect integrity check passed

    - name: Set Interval For Counting Failed Password Attempts - Get authselect current
        features
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
        - result_authselect_check_cmd is success

    - name: Set Interval For Counting Failed Password Attempts - Ensure with-faillock
        feature is enabled using authselect tool
      ansible.builtin.command:
        cmd: authselect enable-feature with-faillock
      register: result_authselect_cmd
      when:
        - result_authselect_check_cmd is success
        - result_authselect_features.stdout is not search("with-faillock")
  when:
    - '"pam" in ansible_facts.packages'
    - result_authselect_present.stat.exists
  tags:
    - DISA-STIG-OL08-00-020012
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - accounts_passwords_pam_faillock_interval
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Set Interval For Counting Failed Password Attempts - Remediation where authselect
    tool is not present
  block:

    - name: Set Interval For Counting Failed Password Attempts - Check if pam_faillock.so
        is already enabled
      ansible.builtin.lineinfile:
        path: /etc/pam.d/system-auth
        regexp: .*auth.*pam_faillock.so (preauth|authfail)
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_faillock_is_enabled

    - name: Set Interval For Counting Failed Password Attempts - Enable pam_faillock.so
        preauth editing PAM files
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        line: auth        required      pam_faillock.so preauth
        insertbefore: ^auth.*sufficient.*pam_unix.so.*
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_is_enabled.found == 0

    - name: Set Interval For Counting Failed Password Attempts - Enable pam_faillock.so
        authfail editing PAM files
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        line: auth        required      pam_faillock.so authfail
        insertafter: ^auth.*sufficient.*pam_unix.so.*
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_is_enabled.found == 0

    - name: Set Interval For Counting Failed Password Attempts - Enable pam_faillock.so
        account section editing PAM files
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        line: account     required      pam_faillock.so
        insertbefore: ^account.*required.*pam_unix.so.*
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_is_enabled.found == 0
  when:
    - '"pam" in ansible_facts.packages'
    - not result_authselect_present.stat.exists
  tags:
    - DISA-STIG-OL08-00-020012
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - accounts_passwords_pam_faillock_interval
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
- name: XCCDF Value var_accounts_passwords_pam_faillock_fail_interval # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_fail_interval: !!str 900
  tags:
    - always

- name: Set Interval For Counting Failed Password Attempts - Check the presence of
    /etc/security/faillock.conf file
  ansible.builtin.stat:
    path: /etc/security/faillock.conf
  register: result_faillock_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
    - DISA-STIG-OL08-00-020012
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - accounts_passwords_pam_faillock_interval
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Set Interval For Counting Failed Password Attempts - Ensure the pam_faillock.so
    fail_interval parameter in /etc/security/faillock.conf
  ansible.builtin.lineinfile:
    path: /etc/security/faillock.conf
    regexp: ^\s*fail_interval\s*=
    line: fail_interval = {{ var_accounts_passwords_pam_faillock_fail_interval }}
    state: present
  when:
    - '"pam" in ansible_facts.packages'
    - result_faillock_conf_check.stat.exists
  tags:
    - DISA-STIG-OL08-00-020012
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - accounts_passwords_pam_faillock_interval
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Set Interval For Counting Failed Password Attempts - Ensure the pam_faillock.so
    fail_interval parameter in PAM files
  block:

    - name: Set Interval For Counting Failed Password Attempts - Check if pam_faillock.so
        fail_interval parameter is already enabled in pam files
      ansible.builtin.lineinfile:
        path: /etc/pam.d/system-auth
        regexp: .*auth.*pam_faillock.so (preauth|authfail).*fail_interval
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_faillock_fail_interval_parameter_is_present

    - name: Set Interval For Counting Failed Password Attempts - Ensure the inclusion
        of pam_faillock.so preauth fail_interval parameter in auth section
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        backrefs: true
        regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)
        line: \1required\3 fail_interval={{ var_accounts_passwords_pam_faillock_fail_interval
          }}
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_fail_interval_parameter_is_present.found == 0

    - name: Set Interval For Counting Failed Password Attempts - Ensure the inclusion
        of pam_faillock.so authfail fail_interval parameter in auth section
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        backrefs: true
        regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)
        line: \1required\3 fail_interval={{ var_accounts_passwords_pam_faillock_fail_interval
          }}
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_fail_interval_parameter_is_present.found == 0

    - name: Set Interval For Counting Failed Password Attempts - Ensure the desired
        value for pam_faillock.so preauth fail_interval parameter in auth section
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        backrefs: true
        regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)(fail_interval)=[0-9]+(.*)
        line: \1required\3\4={{ var_accounts_passwords_pam_faillock_fail_interval
          }}\5
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_fail_interval_parameter_is_present.found > 0

    - name: Set Interval For Counting Failed Password Attempts - Ensure the desired
        value for pam_faillock.so authfail fail_interval parameter in auth section
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        backrefs: true
        regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)(fail_interval)=[0-9]+(.*)
        line: \1required\3\4={{ var_accounts_passwords_pam_faillock_fail_interval
          }}\5
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_fail_interval_parameter_is_present.found > 0
  when:
    - '"pam" in ansible_facts.packages'
    - not result_faillock_conf_check.stat.exists
  tags:
    - DISA-STIG-OL08-00-020012
    - NIST-800-53-AC-7(a)
    - NIST-800-53-CM-6(a)
    - accounts_passwords_pam_faillock_interval
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_accounts_passwords_pam_faillock_fail_interval='900'


if [ -f /usr/bin/authselect ]; then
    if authselect check; then
    authselect enable-feature with-faillock
    authselect apply-changes
else
    echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
    false
fi
else
    AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix.so.*/a auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock.so)/\1required     \3/g' "$pam_file"
done
fi
FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ]; then
    regex="^\s*fail_interval\s*="
    line="fail_interval = $var_accounts_passwords_pam_faillock_fail_interval"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's/^\s*\(fail_interval\s*=\s*\)\([0-9]\+\)/\1'"$var_accounts_passwords_pam_faillock_fail_interval"'/g' $FAILLOCK_CONF
    fi
else
    AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock.so (preauth|authfail).*fail_interval' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock.so.*preauth.*silent.*/ s/$/ fail_interval='"$var_accounts_passwords_pam_faillock_fail_interval"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock.so.*authfail.*/ s/$/ fail_interval='"$var_accounts_passwords_pam_faillock_fail_interval"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock.so.*preauth.*silent.*\)\('"fail_interval"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_fail_interval"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock.so.*authfail.*\)\('"fail_interval"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_fail_interval"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set Lockout Time for Failed Password Attempts   [ref]

This rule configures the system to lock out accounts during a specified time period after a number of incorrect login attempts using pam_faillock.so. pam_faillock.so module requires multiple entries in pam files. These entries must be carefully defined to work as expected. In order to avoid any errors when manually editing these files, it is recommended to use the appropriate tools, such as authselect or authconfig, depending on the OS version.
Warning:  If the system supports the new /etc/security/faillock.conf file but the pam_faillock.so parameters are defined directly in /etc/pam.d/system-auth and /etc/pam.d/password-auth, the remediation will migrate the unlock_time parameter to /etc/security/faillock.conf to ensure compatibility with authselect tool. The parameters deny and fail_interval, if used, also have to be migrated by their respective remediation.
Warning:  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. If the system supports the /etc/security/faillock.conf file, the pam_faillock parameters should be defined in faillock.conf file.
Rationale:
Locking out user accounts after a number of incorrect attempts prevents direct password guessing attacks. Ensuring that an administrator is involved in unlocking locked accounts draws appropriate attention to such situations.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_passwords_pam_faillock_unlock_time
Identifiers and References

References:  BP28(R18), 1, 12, 15, 16, 5.5.3, DSS05.04, DSS05.10, DSS06.10, 3.1.8, CCI-000044, CCI-002236, CCI-002237, CCI-002238, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, CM-6(a), AC-7(b), PR.AC-7, FIA_AFL.1, Req-8.1.7, SRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005, SRG-OS-000329-VMM-001180, OL08-00-020014, SV-248656r779534_rule


Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CJIS-5.5.3
    - DISA-STIG-OL08-00-020014
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.7
    - accounts_passwords_pam_faillock_unlock_time
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Check if system relies on
    authselect tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
    - CJIS-5.5.3
    - DISA-STIG-OL08-00-020014
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.7
    - accounts_passwords_pam_faillock_unlock_time
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Remediation where authselect
    tool is present
  block:

    - name: Set Lockout Time for Failed Password Attempts - Check integrity of authselect
        current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      ignore_errors: true

    - name: Set Lockout Time for Failed Password Attempts - Informative message based
        on the authselect integrity check result
      ansible.builtin.assert:
        that:
          - result_authselect_check_cmd is success
        fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because an authselect profile was
            not selected or the selected profile is not intact.
          - It is not recommended to manually edit the PAM files when authselect tool
            is available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
        success_msg:
          - authselect integrity check passed

    - name: Set Lockout Time for Failed Password Attempts - Get authselect current
        features
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
        - result_authselect_check_cmd is success

    - name: Set Lockout Time for Failed Password Attempts - Ensure with-faillock feature
        is enabled using authselect tool
      ansible.builtin.command:
        cmd: authselect enable-feature with-faillock
      register: result_authselect_cmd
      when:
        - result_authselect_check_cmd is success
        - result_authselect_features.stdout is not search("with-faillock")
  when:
    - '"pam" in ansible_facts.packages'
    - result_authselect_present.stat.exists
  tags:
    - CJIS-5.5.3
    - DISA-STIG-OL08-00-020014
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.7
    - accounts_passwords_pam_faillock_unlock_time
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Remediation where authselect
    tool is not present
  block:

    - name: Set Lockout Time for Failed Password Attempts - Check if pam_faillock.so
        is already enabled
      ansible.builtin.lineinfile:
        path: /etc/pam.d/system-auth
        regexp: .*auth.*pam_faillock.so (preauth|authfail)
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_faillock_is_enabled

    - name: Set Lockout Time for Failed Password Attempts - Enable pam_faillock.so
        preauth editing PAM files
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        line: auth        required      pam_faillock.so preauth
        insertbefore: ^auth.*sufficient.*pam_unix.so.*
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_is_enabled.found == 0

    - name: Set Lockout Time for Failed Password Attempts - Enable pam_faillock.so
        authfail editing PAM files
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        line: auth        required      pam_faillock.so authfail
        insertafter: ^auth.*sufficient.*pam_unix.so.*
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_is_enabled.found == 0

    - name: Set Lockout Time for Failed Password Attempts - Enable pam_faillock.so
        account section editing PAM files
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        line: account     required      pam_faillock.so
        insertbefore: ^account.*required.*pam_unix.so.*
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_is_enabled.found == 0
  when:
    - '"pam" in ansible_facts.packages'
    - not result_authselect_present.stat.exists
  tags:
    - CJIS-5.5.3
    - DISA-STIG-OL08-00-020014
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.7
    - accounts_passwords_pam_faillock_unlock_time
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
- name: XCCDF Value var_accounts_passwords_pam_faillock_unlock_time # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_unlock_time: !!str 900
  tags:
    - always

- name: Set Lockout Time for Failed Password Attempts - Check the presence of /etc/security/faillock.conf
    file
  ansible.builtin.stat:
    path: /etc/security/faillock.conf
  register: result_faillock_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
    - CJIS-5.5.3
    - DISA-STIG-OL08-00-020014
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.7
    - accounts_passwords_pam_faillock_unlock_time
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Ensure the pam_faillock.so
    unlock_time parameter in /etc/security/faillock.conf
  ansible.builtin.lineinfile:
    path: /etc/security/faillock.conf
    regexp: ^\s*unlock_time\s*=
    line: unlock_time = {{ var_accounts_passwords_pam_faillock_unlock_time }}
    state: present
  when:
    - '"pam" in ansible_facts.packages'
    - result_faillock_conf_check.stat.exists
  tags:
    - CJIS-5.5.3
    - DISA-STIG-OL08-00-020014
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.7
    - accounts_passwords_pam_faillock_unlock_time
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

- name: Set Lockout Time for Failed Password Attempts - Ensure the pam_faillock.so
    unlock_time parameter in PAM files
  block:

    - name: Set Lockout Time for Failed Password Attempts - Check if pam_faillock.so
        unlock_time parameter is already enabled in pam files
      ansible.builtin.lineinfile:
        path: /etc/pam.d/system-auth
        regexp: .*auth.*pam_faillock.so (preauth|authfail).*unlock_time
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_faillock_unlock_time_parameter_is_present

    - name: Set Lockout Time for Failed Password Attempts - Ensure the inclusion of
        pam_faillock.so preauth unlock_time parameter in auth section
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        backrefs: true
        regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)
        line: \1required\3 unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
          }}
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_unlock_time_parameter_is_present.found == 0

    - name: Set Lockout Time for Failed Password Attempts - Ensure the inclusion of
        pam_faillock.so authfail unlock_time parameter in auth section
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        backrefs: true
        regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)
        line: \1required\3 unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
          }}
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_unlock_time_parameter_is_present.found == 0

    - name: Set Lockout Time for Failed Password Attempts - Ensure the desired value
        for pam_faillock.so preauth unlock_time parameter in auth section
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        backrefs: true
        regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so preauth.*)(unlock_time)=[0-9]+(.*)
        line: \1required\3\4={{ var_accounts_passwords_pam_faillock_unlock_time }}\5
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_unlock_time_parameter_is_present.found > 0

    - name: Set Lockout Time for Failed Password Attempts - Ensure the desired value
        for pam_faillock.so authfail unlock_time parameter in auth section
      ansible.builtin.lineinfile:
        path: '{{ item }}'
        backrefs: true
        regexp: (^\s*auth\s+)([\w\[].*\b)(\s+pam_faillock.so authfail.*)(unlock_time)=[0-9]+(.*)
        line: \1required\3\4={{ var_accounts_passwords_pam_faillock_unlock_time }}\5
        state: present
      loop:
        - /etc/pam.d/system-auth
        - /etc/pam.d/password-auth
      when:
        - result_pam_faillock_unlock_time_parameter_is_present.found > 0
  when:
    - '"pam" in ansible_facts.packages'
    - not result_faillock_conf_check.stat.exists
  tags:
    - CJIS-5.5.3
    - DISA-STIG-OL08-00-020014
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - NIST-800-53-CM-6(a)
    - PCI-DSS-Req-8.1.7
    - accounts_passwords_pam_faillock_unlock_time
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_accounts_passwords_pam_faillock_unlock_time='900'


if [ -f /usr/bin/authselect ]; then
    if authselect check; then
    authselect enable-feature with-faillock
    authselect apply-changes
else
    echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
It is not recommended to manually edit the PAM files when authselect tool is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
    false
fi
else
    AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
for pam_file in "${AUTH_FILES[@]}"
do
    if ! grep -qE '^\s*auth\s+required\s+pam_faillock\.so\s+(preauth silent|authfail).*$' "$pam_file" ; then
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix.so.*/i auth        required      pam_faillock.so preauth silent' "$pam_file"
        sed -i --follow-symlinks '/^auth.*sufficient.*pam_unix.so.*/a auth        required      pam_faillock.so authfail' "$pam_file"
        sed -i --follow-symlinks '/^account.*required.*pam_unix.so.*/i account     required      pam_faillock.so' "$pam_file"
    fi
    sed -Ei 's/(auth.*)(\[default=die\])(.*pam_faillock.so)/\1required     \3/g' "$pam_file"
done
fi
FAILLOCK_CONF="/etc/security/faillock.conf"
if [ -f $FAILLOCK_CONF ]; then
    regex="^\s*unlock_time\s*="
    line="unlock_time = $var_accounts_passwords_pam_faillock_unlock_time"
    if ! grep -q $regex $FAILLOCK_CONF; then
        echo $line >> $FAILLOCK_CONF
    else
        sed -i --follow-symlinks 's/^\s*\(unlock_time\s*=\s*\)\([0-9]\+\)/\1'"$var_accounts_passwords_pam_faillock_unlock_time"'/g' $FAILLOCK_CONF
    fi
else
    AUTH_FILES=("/etc/pam.d/system-auth" "/etc/pam.d/password-auth")
    for pam_file in "${AUTH_FILES[@]}"
    do
        if ! grep -qE '^\s*auth.*pam_faillock.so (preauth|authfail).*unlock_time' "$pam_file"; then
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock.so.*preauth.*silent.*/ s/$/ unlock_time='"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
            sed -i --follow-symlinks '/^auth.*required.*pam_faillock.so.*authfail.*/ s/$/ unlock_time='"$var_accounts_passwords_pam_faillock_unlock_time"'/' "$pam_file"
        else
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock.so.*preauth.*silent.*\)\('"unlock_time"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_unlock_time"'\3/' "$pam_file"
            sed -i --follow-symlinks 's/\(^auth.*required.*pam_faillock.so.*authfail.*\)\('"unlock_time"'=\)[0-9]\+\(.*\)/\1\2'"$var_accounts_passwords_pam_faillock_unlock_time"'\3/' "$pam_file"
        fi
    done
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Set Password Quality Requirements   Group contains 1 group and 5 rules
[ref]   The default pam_pwquality PAM module provides strength checking for passwords. It performs a number of checks, such as making sure passwords are not similar to dictionary words, are of at least a certain length, are not the previous password reversed, and are not simply a change of case from the previous password. It can also require passwords to be in certain character classes. The pam_pwquality module is the preferred way of configuring password requirements.

The man pages pam_pwquality(8) provide information on the capabilities and configuration of each.
Group   Set Password Quality Requirements with pam_pwquality   Group contains 5 rules
[ref]   The pam_pwquality PAM module can be configured to meet requirements for a variety of policies.

For example, to configure pam_pwquality to require at least one uppercase character, lowercase character, digit, and other (special) character, make sure that pam_pwquality exists in /etc/pam.d/system-auth:
password    requisite     pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type=
If no such line exists, add one as the first line of the password section in /etc/pam.d/system-auth. Next, modify the settings in /etc/security/pwquality.conf to match the following:
difok = 4
minlen = 14
dcredit = -1
ucredit = -1
lcredit = -1
ocredit = -1
maxrepeat = 3
The arguments can be modified to ensure compliance with your organization's security policy. Discussion of each parameter follows.

Rule   Ensure PAM Enforces Password Requirements - Minimum Digit Characters   [ref]

The pam_pwquality module's dcredit parameter controls requirements for usage of digits in a password. When set to a negative number, any password will be required to contain that many digits. When set to a positive number, pam_pwquality will grant +1 additional length credit for each digit. Modify the dcredit setting in /etc/security/pwquality.conf to require the use of a digit in passwords.
Rationale:
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised. Requiring digits makes password guessing attacks more difficult by ensuring a larger search space.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_dcredit
Identifiers and References

References:  BP28(R18), 1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000194, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, FMT_MOF_EXT.1, Req-8.2.3, SRG-OS-000071-GPOS-00039, SRG-OS-000071-VMM-000380, OL08-00-020130, SV-248689r779633_rule


Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - DISA-STIG-OL08-00-020130
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(4)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.3
    - accounts_password_pam_dcredit
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
- name: XCCDF Value var_password_pam_dcredit # promote to variable
  set_fact:
    var_password_pam_dcredit: !!str -1
  tags:
    - always

- name: Ensure PAM variable dcredit is set accordingly
  lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*dcredit
    line: dcredit = {{ var_password_pam_dcredit }}
  when: '"pam" in ansible_facts.packages'
  tags:
    - DISA-STIG-OL08-00-020130
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(4)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.3
    - accounts_password_pam_dcredit
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_dcredit='-1'


# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/security/pwquality.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^dcredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_dcredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^dcredit\\>" "/etc/security/pwquality.conf"; then
    "${sed_command[@]}" "s/^dcredit\\>.*/$formatted_output/gi" "/etc/security/pwquality.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters   [ref]

The pam_pwquality module's lcredit parameter controls requirements for usage of lowercase letters in a password. When set to a negative number, any password will be required to contain that many lowercase characters. When set to a positive number, pam_pwquality will grant +1 additional length credit for each lowercase character. Modify the lcredit setting in /etc/security/pwquality.conf to require the use of a lowercase character in passwords.
Rationale:
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.
Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possble combinations that need to be tested before the password is compromised. Requiring a minimum number of lowercase characters makes password guessing attacks more difficult by ensuring a larger search space.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_lcredit
Identifiers and References

References:  BP28(R18), 1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000193, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, FMT_MOF_EXT.1, Req-8.2.3, SRG-OS-000070-GPOS-00038, SRG-OS-000070-VMM-000370, OL08-00-020120, SV-248688r779630_rule


Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - DISA-STIG-OL08-00-020120
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(4)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.3
    - accounts_password_pam_lcredit
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
- name: XCCDF Value var_password_pam_lcredit # promote to variable
  set_fact:
    var_password_pam_lcredit: !!str -1
  tags:
    - always

- name: Ensure PAM variable lcredit is set accordingly
  lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*lcredit
    line: lcredit = {{ var_password_pam_lcredit }}
  when: '"pam" in ansible_facts.packages'
  tags:
    - DISA-STIG-OL08-00-020120
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(4)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.3
    - accounts_password_pam_lcredit
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_lcredit='-1'


# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/security/pwquality.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^lcredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_lcredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^lcredit\\>" "/etc/security/pwquality.conf"; then
    "${sed_command[@]}" "s/^lcredit\\>.*/$formatted_output/gi" "/etc/security/pwquality.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure PAM Enforces Password Requirements - Minimum Length   [ref]

The pam_pwquality module's minlen parameter controls requirements for minimum characters required in a password. Add minlen=18 after pam_pwquality to set minimum password length requirements.
Rationale:
The shorter the password, the lower the number of possible combinations that need to be tested before the password is compromised.
Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. Password length is one factor of several that helps to determine strength and how long it takes to crack a password. Use of more characters in a password helps to exponentially increase the time and/or resources required to compromose the password.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_minlen
Identifiers and References

References:  BP28(R18), 1, 12, 15, 16, 5, 5.6.2.1.1, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000205, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, FMT_MOF_EXT.1, Req-8.2.3, SRG-OS-000078-GPOS-00046, SRG-OS-000072-VMM-000390, SRG-OS-000078-VMM-000450, OL08-00-020230, SV-248699r779663_rule


Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - CJIS-5.6.2.1.1
    - DISA-STIG-OL08-00-020230
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(4)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.3
    - accounts_password_pam_minlen
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
- name: XCCDF Value var_password_pam_minlen # promote to variable
  set_fact:
    var_password_pam_minlen: !!str 18
  tags:
    - always

- name: Ensure PAM variable minlen is set accordingly
  lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*minlen
    line: minlen = {{ var_password_pam_minlen }}
  when: '"pam" in ansible_facts.packages'
  tags:
    - CJIS-5.6.2.1.1
    - DISA-STIG-OL08-00-020230
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(4)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.3
    - accounts_password_pam_minlen
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_minlen='18'


# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/security/pwquality.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^minlen")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_minlen"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^minlen\\>" "/etc/security/pwquality.conf"; then
    "${sed_command[@]}" "s/^minlen\\>.*/$formatted_output/gi" "/etc/security/pwquality.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure PAM Enforces Password Requirements - Minimum Special Characters   [ref]

The pam_pwquality module's ocredit= parameter controls requirements for usage of special (or "other") characters in a password. When set to a negative number, any password will be required to contain that many special characters. When set to a positive number, pam_pwquality will grant +1 additional length credit for each special character. Modify the ocredit setting in /etc/security/pwquality.conf to equal -1 to require use of a special character in passwords.
Rationale:
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised. Requiring a minimum number of special characters makes password guessing attacks more difficult by ensuring a larger search space.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_ocredit
Identifiers and References

References:  BP28(R18), 1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-001619, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, FMT_MOF_EXT.1, SRG-OS-000266-GPOS-00101, SRG-OS-000266-VMM-000940, OL08-00-020280, SV-248709r779693_rule


Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - DISA-STIG-OL08-00-020280
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(4)
    - NIST-800-53-IA-5(c)
    - accounts_password_pam_ocredit
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
- name: XCCDF Value var_password_pam_ocredit # promote to variable
  set_fact:
    var_password_pam_ocredit: !!str -1
  tags:
    - always

- name: Ensure PAM variable ocredit is set accordingly
  lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*ocredit
    line: ocredit = {{ var_password_pam_ocredit }}
  when: '"pam" in ansible_facts.packages'
  tags:
    - DISA-STIG-OL08-00-020280
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(4)
    - NIST-800-53-IA-5(c)
    - accounts_password_pam_ocredit
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_ocredit='-1'


# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/security/pwquality.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^ocredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_ocredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^ocredit\\>" "/etc/security/pwquality.conf"; then
    "${sed_command[@]}" "s/^ocredit\\>.*/$formatted_output/gi" "/etc/security/pwquality.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters   [ref]

The pam_pwquality module's ucredit= parameter controls requirements for usage of uppercase letters in a password. When set to a negative number, any password will be required to contain that many uppercase characters. When set to a positive number, pam_pwquality will grant +1 additional length credit for each uppercase character. Modify the ucredit setting in /etc/security/pwquality.conf to require the use of an uppercase character in passwords.
Rationale:
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_ucredit
Identifiers and References

References:  BP28(R18), 1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000192, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, FMT_MOF_EXT.1, Req-8.2.3, SRG-OS-000069-GPOS-00037, SRG-OS-000069-VMM-000360, OL08-00-020110, SV-248687r779627_rule


Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - DISA-STIG-OL08-00-020110
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(4)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.3
    - accounts_password_pam_ucredit
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy
- name: XCCDF Value var_password_pam_ucredit # promote to variable
  set_fact:
    var_password_pam_ucredit: !!str -1
  tags:
    - always

- name: Ensure PAM variable ucredit is set accordingly
  lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*ucredit
    line: ucredit = {{ var_password_pam_ucredit }}
  when: '"pam" in ansible_facts.packages'
  tags:
    - DISA-STIG-OL08-00-020110
    - NIST-800-53-CM-6(a)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-53-IA-5(4)
    - NIST-800-53-IA-5(c)
    - PCI-DSS-Req-8.2.3
    - accounts_password_pam_ucredit
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - restrict_strategy

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_ucredit='-1'


# Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
# Otherwise, regular sed command will do.
sed_command=('sed' '-i')
if test -L "/etc/security/pwquality.conf"; then
    sed_command+=('--follow-symlinks')
fi

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^ucredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_ucredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^ucredit\\>" "/etc/security/pwquality.conf"; then
    "${sed_command[@]}" "s/^ucredit\\>.*/$formatted_output/gi" "/etc/security/pwquality.conf"
else
    # \n is precaution for case where file ends without trailing newline
    
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Set Password Hashing Algorithm   Group contains 1 rule
[ref]   The system's default algorithm for storing password hashes in /etc/shadow is SHA-512. This can be configured in several locations.

Rule   Set PAM's Password Hashing Algorithm   [ref]

The PAM system service can be configured to only store encrypted representations of passwords. In "/etc/pam.d/password-auth", the password section of the file controls which PAM modules execute during a password change. Set the pam_unix.so module in the password section to include the argument sha512, as shown below:
password    sufficient    pam_unix.so sha512 other arguments...

This will help ensure when local users change their passwords, hashes for the new passwords will be generated using the SHA-512 algorithm. This is the default.
Rationale:
Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised. Passwords that are encrypted with a weak algorithm are no more protected than if they are kepy in plain text.

This setting ensures user and group account administration utilities are configured to store only encrypted representations of passwords. Additionally, the crypt_style configuration option ensures the use of a strong hashing algorithm that makes password cracking attacks more difficult.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_set_password_hashing_algorithm_systemauth
Identifiers and References

References:  BP28(R32), 1, 12, 15, 16, 5, 5.6.2.2, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.13.11, CCI-000196, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0418, 1055, 1402, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(c), CM-6(a), PR.AC-1, PR.AC-6, PR.AC-7, Req-8.2.1, SRG-OS-000073-GPOS-00041, SRG-OS-000480-VMM-002000, OL08-00-010160, SV-248544r779198_rule


# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

AUTH_FILES[0]="/etc/pam.d/system-auth"
for pamFile in "${AUTH_FILES[@]}"
do
	if ! grep -q "^password.*sufficient.*pam_unix.so.*sha512" $pamFile; then
		sed -i --follow-symlinks "/^password.*sufficient.*pam_unix.so/ s/$/ sha512/" $pamFile
	fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Protect Accounts by Restricting Password-Based Login   Group contains 2 groups and 4 rules
[ref]   Conventionally, Unix shell accounts are accessed by providing a username and password to a login program, which tests these values for correctness using the /etc/passwd and /etc/shadow files. Password-based login is vulnerable to guessing of weak passwords, and to sniffing and man-in-the-middle attacks against passwords entered over a network or at an insecure console. Therefore, mechanisms for accessing accounts by entering usernames and passwords should be restricted to those which are operationally necessary.
Group   Set Password Expiration Parameters   Group contains 2 rules
[ref]   The file /etc/login.defs controls several password-related settings. Programs such as passwd, su, and login consult /etc/login.defs to determine behavior with regard to password aging, expiration warnings, and length. See the man page login.defs(5) for more information.

Users should be forced to change their passwords, in order to decrease the utility of compromised passwords. However, the need to change passwords often should be balanced against the risk that users will reuse or write down passwords if forced to change them too often. Forcing password changes every 90-360 days, depending on the environment, is recommended. Set the appropriate value as PASS_MAX_DAYS and apply it to existing accounts with the -M flag.

The PASS_MIN_DAYS (-m) setting prevents password changes for 7 days after the first change, to discourage password cycling. If you use this setting, train users to contact an administrator for an emergency password change in case a new password becomes compromised. The PASS_WARN_AGE (-W) setting gives users 7 days of warnings at login time that their passwords are about to expire.

For example, for each existing human user USER, expiration parameters could be adjusted to a 180 day maximum password age, 7 day minimum password age, and 7 day warning period with the following command:
$ sudo chage -M 180 -m 7 -W 7 USER
Group   Verify Proper Storage and Existence of Password Hashes   Group contains 2 rules
[ref]   By default, password hashes for local accounts are stored in the second field (colon-separated) in /etc/shadow. This file should be readable only by processes running with root credentials, preventing users from casually accessing others' password hashes and attempting to crack them. However, it remains possible to misconfigure the system and store password hashes in world-readable files such as /etc/passwd, or to even store passwords themselves in plaintext on the system. Using system-provided tools for password change/creation should allow administrators to avoid such misconfiguration.

Rule   Set number of Password Hashing Rounds - password-auth   [ref]

Configure the number or rounds for the password hashing algorithm. This can be accomplished by using the rounds option for the pam_unix PAM module.

In file /etc/pam.d/password-auth append rounds=65536 to the pam_unix.so entry, as shown below:
password sufficient pam_unix.so ...existing_options... rounds=65536
The system's default number of rounds is 5000.
Warning:  Setting a high number of hashing rounds makes it more difficult to brute force the password, but requires more CPU resources to authenticate users.
Rationale:
Using a higher number of rounds makes password cracking attacks more difficult.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_unix_rounds_password_auth
Identifiers and References

References:  BP28(R32), CCI-000196, SRG-OS-000073-GPOS-00041, OL08-00-010130, SV-248535r779171_rule


Complexity:low
Disruption:medium
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - DISA-STIG-OL08-00-010130
    - accounts_password_pam_unix_rounds_password_auth
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
- name: XCCDF Value var_password_pam_unix_rounds # promote to variable
  set_fact:
    var_password_pam_unix_rounds: !!str 65536
  tags:
    - always

- name: Check for existing rounds parameter
  ansible.builtin.lineinfile:
    path: /etc/pam.d/password-auth
    create: false
    regexp: ^password.*pam_unix.so.*rounds=
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_unix_rounds_present
  when: '"pam" in ansible_facts.packages'
  tags:
    - DISA-STIG-OL08-00-010130
    - accounts_password_pam_unix_rounds_password_auth
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Check if system relies on authselect
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
    - DISA-STIG-OL08-00-010130
    - accounts_password_pam_unix_rounds_password_auth
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Remediation where authselect tool is present
  block:

    - name: Check the integrity of the current authselect profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      ignore_errors: true

    - name: Informative message based on the authselect integrity check result
      ansible.builtin.assert:
        that:
          - result_authselect_check_cmd is success
        fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because the authselect profile is
            not intact.
          - It is not recommended to manually edit the PAM files when authselect is
            available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
        success_msg:
          - authselect integrity check passed

    - name: Get authselect current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
        - result_authselect_check_cmd is success

    - name: Define the current authselect profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

    - name: Define the new authselect custom profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

    - name: Get authselect current features to also enable them in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

    - name: Check if any custom profile with the same name was already created in
        the past
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
        - authselect_current_profile is not match("custom/")

    - name: Create a custom profile based on the current profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b sssd
      when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

    - name: Ensure the desired rounds value is updated in the custom profile
      ansible.builtin.replace:
        dest: /etc/authselect/{{ authselect_custom_profile }}/password-auth
        regexp: (^\s*password.*pam_unix.so.*rounds=)(\S+)(.*)$
        replace: \g<1>{{ var_password_pam_unix_rounds }}\g<3>
      when:
        - result_authselect_profile is not skipped
        - result_pam_unix_rounds_present.found == 1

    - name: Ensure the rounds parameter is included in the custom profile
      ansible.builtin.replace:
        dest: /etc/authselect/{{ authselect_custom_profile }}/password-auth
        regexp: (^\s*password.*pam_unix.so.*)(?! rounds=\S+)(.*)$
        replace: \g<1> \g<2> rounds={{ var_password_pam_unix_rounds }}
      when:
        - result_authselect_profile is not skipped
        - result_pam_unix_rounds_present.found == 0

    - name: Ensure a backup of current authselect profile before selecting the custom
        profile
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-rounds-hardening.backup
      when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure the custom profile is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }} --force
      register: result_pam_authselect_select_profile
      when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

    - name: Restore the authselect features in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

    - name: Ensure the custom profile changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-rounds-hardening.backup
      when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
  when:
    - '"pam" in ansible_facts.packages'
    - result_authselect_present.stat.exists
  tags:
    - DISA-STIG-OL08-00-010130
    - accounts_password_pam_unix_rounds_password_auth
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Remediation where authselect tool is not present and PAM files are directly
    edited
  block:

    - name: Ensure the desired rounds value is updated in the custom profile
      ansible.builtin.replace:
        dest: /etc/pam.d/password-auth
        regexp: (^\s*password.*pam_unix.so.*rounds=)(\S+)(.*)$
        replace: \g<1>{{ var_password_pam_unix_rounds }}\g<3>

    - name: Ensure the remember parameter is included in the custom profile
      ansible.builtin.replace:
        dest: /etc/pam.d/password-auth
        regexp: (^\s*password.*pam_unix.so.*)(?! rounds=\S+)(.*)$
        replace: \g<1> \g<2> rounds={{ var_password_pam_unix_rounds }}
      when:
        - result_pam_unix_rounds_present.found == 0
  when:
    - '"pam" in ansible_facts.packages'
    - not result_authselect_present.stat.exists
  tags:
    - DISA-STIG-OL08-00-010130
    - accounts_password_pam_unix_rounds_password_auth
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_unix_rounds='65536'


if [ -f /usr/bin/authselect ]; then
    if authselect check; then
        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # Standard profiles delivered with authselect should not be modified.
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            # Ensure a backup before changing the profile
            authselect apply-changes -b --backup=before-rounds-hardening.backup
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
        fi
        # Include the desired configuration in the custom profile
        CUSTOM_PASSWORD_AUTH="/etc/authselect/$CURRENT_PROFILE/password-auth"
		if ! grep -q "^\s*password.*pam_unix.so.*rounds=" $CUSTOM_PASSWORD_AUTH; then
			sed -i --follow-symlinks "/^\s*password.*pam_unix.so/ s/$/ rounds=$var_password_pam_unix_rounds/" $CUSTOM_PASSWORD_AUTH
		else
			sed -r -i --follow-symlinks "s/(^\s*password.*pam_unix.so.*)(rounds=[[:digit:]]+)(.*)/\1rounds=$var_password_pam_unix_rounds \3/g" $CUSTOM_PASSWORD_AUTH
		fi
        authselect apply-changes -b --backup=after-rounds-hardening.backup
    else
        echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because the authselect profile is not intact.
It is not recommended to manually edit the PAM files when authselect is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        false
    fi
else

    pamFile="/etc/pam.d/password-auth"

    if grep -q "rounds=" $pamFile; then
        sed -iP --follow-symlinks "/password[[:space:]]\+sufficient[[:space:]]\+pam_unix\.so/ \
                                        s/rounds=[[:digit:]]\+/rounds=$var_password_pam_unix_rounds/" $pamFile
    else
        sed -iP --follow-symlinks "/password[[:space:]]\+sufficient[[:space:]]\+pam_unix\.so/ s/$/ rounds=$var_password_pam_unix_rounds/" $pamFile
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set number of Password Hashing Rounds - system-auth   [ref]

Configure the number or rounds for the password hashing algorithm. This can be accomplished by using the rounds option for the pam_unix PAM module.

In file /etc/pam.d/system-auth append rounds=65536 to the pam_unix.so entry, as shown below:
password sufficient pam_unix.so ...existing_options... rounds=65536
The system's default number of rounds is 5000.
Warning:  Setting a high number of hashing rounds makes it more difficult to brute force the password, but requires more CPU resources to authenticate users.
Rationale:
Using a higher number of rounds makes password cracking attacks more difficult.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_unix_rounds_system_auth
Identifiers and References

References:  BP28(R32), CCI-000196, SRG-OS-000073-GPOS-00041, OL08-00-010131, SV-248536r779174_rule


Complexity:low
Disruption:medium
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
    - DISA-STIG-OL08-00-010131
    - accounts_password_pam_unix_rounds_system_auth
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed
- name: XCCDF Value var_password_pam_unix_rounds # promote to variable
  set_fact:
    var_password_pam_unix_rounds: !!str 65536
  tags:
    - always

- name: Check for existing rounds parameter
  ansible.builtin.lineinfile:
    path: /etc/pam.d/system-auth
    create: false
    regexp: ^password.*pam_unix.so.*rounds=
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_unix_rounds_present
  when: '"pam" in ansible_facts.packages'
  tags:
    - DISA-STIG-OL08-00-010131
    - accounts_password_pam_unix_rounds_system_auth
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Check if system relies on authselect
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
    - DISA-STIG-OL08-00-010131
    - accounts_password_pam_unix_rounds_system_auth
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Remediation where authselect tool is present
  block:

    - name: Check the integrity of the current authselect profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      ignore_errors: true

    - name: Informative message based on the authselect integrity check result
      ansible.builtin.assert:
        that:
          - result_authselect_check_cmd is success
        fail_msg:
          - authselect integrity check failed. Remediation aborted!
          - This remediation could not be applied because the authselect profile is
            not intact.
          - It is not recommended to manually edit the PAM files when authselect is
            available.
          - In cases where the default authselect profile does not cover a specific
            demand, a custom authselect profile is recommended.
        success_msg:
          - authselect integrity check passed

    - name: Get authselect current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
        - result_authselect_check_cmd is success

    - name: Define the current authselect profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is match("custom/")

    - name: Define the new authselect custom profile as a local fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
        - result_authselect_profile is not skipped
        - result_authselect_profile.stdout is not match("custom/")

    - name: Get authselect current features to also enable them in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")

    - name: Check if any custom profile with the same name was already created in
        the past
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
        - authselect_current_profile is not match("custom/")

    - name: Create a custom profile based on the current profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b sssd
      when:
        - result_authselect_check_cmd is success
        - authselect_current_profile is not match("custom/")
        - not result_authselect_custom_profile_present.stat.exists

    - name: Ensure the desired rounds value is updated in the custom profile
      ansible.builtin.replace:
        dest: /etc/authselect/{{ authselect_custom_profile }}/system-auth
        regexp: (^\s*password.*pam_unix.so.*rounds=)(\S+)(.*)$
        replace: \g<1>{{ var_password_pam_unix_rounds }}\g<3>
      when:
        - result_authselect_profile is not skipped
        - result_pam_unix_rounds_present.found == 1

    - name: Ensure the rounds parameter is included in the custom profile
      ansible.builtin.replace:
        dest: /etc/authselect/{{ authselect_custom_profile }}/system-auth
        regexp: (^\s*password.*pam_unix.so.*)(?! rounds=\S+)(.*)$
        replace: \g<1> \g<2> rounds={{ var_password_pam_unix_rounds }}
      when:
        - result_authselect_profile is not skipped
        - result_pam_unix_rounds_present.found == 0

    - name: Ensure a backup of current authselect profile before selecting the custom
        profile
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-rounds-hardening.backup
      when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

    - name: Ensure the custom profile is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }} --force
      register: result_pam_authselect_select_profile
      when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
        - authselect_current_profile is not match("custom/")
        - authselect_custom_profile is not match(authselect_current_profile)

    - name: Restore the authselect features in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      when:
        - result_authselect_profile is not skipped
        - result_authselect_features is not skipped
        - result_pam_authselect_select_profile is not skipped

    - name: Ensure the custom profile changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-rounds-hardening.backup
      when:
        - result_authselect_check_cmd is success
        - result_authselect_profile is not skipped
  when:
    - '"pam" in ansible_facts.packages'
    - result_authselect_present.stat.exists
  tags:
    - DISA-STIG-OL08-00-010131
    - accounts_password_pam_unix_rounds_system_auth
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

- name: Remediation where authselect tool is not present and PAM files are directly
    edited
  block:

    - name: Ensure the desired rounds value is updated in the custom profile
      ansible.builtin.replace:
        dest: /etc/pam.d/system-auth
        regexp: (^\s*password.*pam_unix.so.*rounds=)(\S+)(.*)$
        replace: \g<1>{{ var_password_pam_unix_rounds }}\g<3>

    - name: Ensure the remember parameter is included in the custom profile
      ansible.builtin.replace:
        dest: /etc/pam.d/system-auth
        regexp: (^\s*password.*pam_unix.so.*)(?! rounds=\S+)(.*)$
        replace: \g<1> \g<2> rounds={{ var_password_pam_unix_rounds }}
      when:
        - result_pam_unix_rounds_present.found == 0
  when:
    - '"pam" in ansible_facts.packages'
    - not result_authselect_present.stat.exists
  tags:
    - DISA-STIG-OL08-00-010131
    - accounts_password_pam_unix_rounds_system_auth
    - configure_strategy
    - low_complexity
    - medium_disruption
    - medium_severity
    - no_reboot_needed

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_unix_rounds='65536'


if [ -f /usr/bin/authselect ]; then
    if authselect check; then
        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # Standard profiles delivered with authselect should not be modified.
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            # Ensure a backup before changing the profile
            authselect apply-changes -b --backup=before-rounds-hardening.backup
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
        fi
        # Include the desired configuration in the custom profile
        CUSTOM_SYSTEM_AUTH="/etc/authselect/$CURRENT_PROFILE/system-auth"
		if ! grep -q "^\s*password.*pam_unix.so.*rounds=" $CUSTOM_SYSTEM_AUTH; then
			sed -i --follow-symlinks "/^\s*password.*pam_unix.so/ s/$/ rounds=$var_password_pam_unix_rounds/" $CUSTOM_SYSTEM_AUTH
		else
			sed -r -i --follow-symlinks "s/(^\s*password.*pam_unix.so.*)(rounds=[[:digit:]]+)(.*)/\1rounds=$var_password_pam_unix_rounds \3/g" $CUSTOM_SYSTEM_AUTH
		fi
        authselect apply-changes -b --backup=after-rounds-hardening.backup
    else
        echo "
authselect integrity check failed. Remediation aborted!
This remediation could not be applied because the authselect profile is not intact.
It is not recommended to manually edit the PAM files when authselect is available.
In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        false
    fi
else
    pamFile="/etc/pam.d/system-auth"
    if grep -q "rounds=" $pamFile; then
        sed -iP --follow-symlinks "/password[[:space:]]\+sufficient[[:space:]]\+pam_unix\.so/ \
                                        s/rounds=[[:digit:]]\+/rounds=$var_password_pam_unix_rounds/" $pamFile
    else
        sed -iP --follow-symlinks "/password[[:space:]]\+sufficient[[:space:]]\+pam_unix\.so/ s/$/ rounds=$var_password_pam_unix_rounds/" $pamFile
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Configure Syslog   Group contains 2 rules
[ref]   The syslog service has been the default Unix logging mechanism for many years. It has a number of downsides, including inconsistent log format, lack of authentication for received messages, and lack of authentication, encryption, or reliable transport for messages sent over a network. However, due to its long history, syslog is a de facto standard which is supported by almost all Unix applications.

In Oracle Linux 8, rsyslog has replaced ksyslogd as the syslog daemon of choice, and it includes some additional security features such as reliable, connection-oriented (i.e. TCP) transmission of logs, the option to log to database formats, and the encryption of log data en route to a central logging server. This section discusses how to configure rsyslog for best effect, and how to use tools provided with the system to maintain and monitor logs.

Rule   Ensure rsyslog is Installed   [ref]

Rsyslog is installed by default. The rsyslog package can be installed with the following command:
 $ sudo yum install rsyslog
Rationale:
The rsyslog package provides the rsyslog daemon, which provides system logging services.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_rsyslog_installed
Identifiers and References

References:  BP28(R5), NT28(R46), 1, 14, 15, 16, 3, 5, 6, APO11.04, BAI03.05, DSS05.04, DSS05.07, MEA02.01, CCI-001311, CCI-001312, CCI-000366, 164.312(a)(2)(ii), 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, CM-6(a), PR.PT-1, FTP_ITC_EXT.1.1, SRG-OS-000479-GPOS-00224, SRG-OS-000051-GPOS-00024, SRG-OS-000480-GPOS-00227, OL08-00-030670, SV-248812r780002_rule


Complexity:low
Disruption:low
Strategy:enable

package --add=rsyslog

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure rsyslog is installed
  package:
    name: rsyslog
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - DISA-STIG-OL08-00-030670
    - NIST-800-53-CM-6(a)
    - enable_strategy
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - package_rsyslog_installed

Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if ! rpm -q --quiet "rsyslog" ; then
    yum install -y "rsyslog"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi


[[packages]]
name = "rsyslog"
version = "*"

Complexity:low
Disruption:low
Strategy:enable
include install_rsyslog

class install_rsyslog {
  package { 'rsyslog':
    ensure => 'installed',
  }
}

Rule   Enable rsyslog Service   [ref]

The rsyslog service provides syslog-style logging by default on Oracle Linux 8. The rsyslog service can be enabled with the following command:
$ sudo systemctl enable rsyslog.service
Rationale:
The rsyslog service must be running in order to provide logging services, which are essential to system administration.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_service_rsyslog_enabled
Identifiers and References

References:  BP28(R5), NT28(R46), 1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO13.01, BAI03.05, BAI04.04, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, CCI-001311, CCI-001312, CCI-001557, CCI-001851, CCI-000366, 164.312(a)(2)(ii), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, SR 7.1, SR 7.2, A.12.1.3, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, A.17.2.1, CM-6(a), AU-4(1), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.DS-4, PR.PT-1, SRG-OS-000480-GPOS-00227, OL08-00-010561, SV-248615r779411_rule


Complexity:low
Disruption:low
Strategy:enable
- name: Enable service rsyslog
  block:

    - name: Gather the package facts
      package_facts:
        manager: auto

    - name: Enable service rsyslog
      service:
        name: rsyslog
        enabled: 'yes'
        state: started
        masked: 'no'
      when:
        - '"rsyslog" in ansible_facts.packages'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - DISA-STIG-OL08-00-010561
    - NIST-800-53-AU-4(1)
    - NIST-800-53-CM-6(a)
    - enable_strategy
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - service_rsyslog_enabled

Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'rsyslog.service'
"$SYSTEMCTL_EXEC" start 'rsyslog.service'
"$SYSTEMCTL_EXEC" enable 'rsyslog.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi


[customizations.services]
enabled = ["rsyslog"]

Complexity:low
Disruption:low
Strategy:enable
include enable_rsyslog

class enable_rsyslog {
  service {'rsyslog':
    enable => true,
    ensure => 'running',
  }
}
Group   File Permissions and Masks   Group contains 1 group and 2 rules
[ref]   Traditional Unix security relies heavily on file and directory permissions to prevent unauthorized users from reading or modifying files to which they should not have access.

Several of the commands in this section search filesystems for files or directories with certain characteristics, and are intended to be run on every local partition on a given system. When the variable PART appears in one of the commands below, it means that the command is intended to be run repeatedly, with the name of each local partition substituted for PART in turn.

The following command prints a list of all xfs partitions on the local system, which is the default filesystem for Oracle Linux 8 installations:
$ mount -t xfs | awk '{print $3}'
For any systems that use a different local filesystem type, modify this command as appropriate.
Group   Verify Permissions on Important Files and Directories   Group contains 2 rules
[ref]   Permissions for many files on a system must be set restrictively to ensure sensitive information is properly protected. This section discusses important permission restrictions which can be verified to ensure that no harmful discrepancies have arisen.

Rule   Ensure All SGID Executables Are Authorized   [ref]

The SGID (set group id) bit should be set only on files that were installed via authorized means. A straightforward means of identifying unauthorized SGID files is determine if any were not installed as part of an RPM package, which is cryptographically verified. Investigate the origin of any unpackaged SGID files. This configuration check considers authorized SGID files which were installed via RPM. It is assumed that when an individual has sudo access to install an RPM and all packages are signed with an organizationally-recognized GPG key, the software should be considered an approved package on the system. Any SGID file not deployed through an RPM will be flagged for further review.
Rationale:
Executable files with the SGID permission run with the privileges of the owner of the file. SGID files of uncertain provenance could allow for unprivileged users to elevate privileges. The presence of these files should be strictly controlled on the system.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_unauthorized_sgid
Identifiers and References

References:  BP28(R37), BP28(R38), 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5

Rule   Ensure All SUID Executables Are Authorized   [ref]

The SUID (set user id) bit should be set only on files that were installed via authorized means. A straightforward means of identifying unauthorized SUID files is determine if any were not installed as part of an RPM package, which is cryptographically verified. Investigate the origin of any unpackaged SUID files. This configuration check considers authorized SUID files which were installed via RPM. It is assumed that when an individual has sudo access to install an RPM and all packages are signed with an organizationally-recognized GPG key, the software should be considered an approved package on the system. Any SUID file not deployed through an RPM will be flagged for further review.
Rationale:
Executable files with the SUID permission run with the privileges of the owner of the file. SUID files of uncertain provenance could allow for unprivileged users to elevate privileges. The presence of these files should be strictly controlled on the system.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_unauthorized_suid
Identifiers and References

References:  BP28(R37), BP28(R38), 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5

Group   Services   Group contains 10 groups and 12 rules
[ref]   The best protection against vulnerable software is running less software. This section describes how to review the software which Oracle Linux 8 installs on a system and disable software which is not needed. It then enumerates the software packages installed on a default Oracle Linux 8 system and provides guidance about which ones can be safely disabled.

Oracle Linux 8 provides a convenient minimal install option that essentially installs the bare necessities for a functional system. When building Oracle Linux 8 systems, it is highly recommended to select the minimal packages and then build up the system from there.
Group   DHCP   Group contains 1 group and 1 rule
[ref]   The Dynamic Host Configuration Protocol (DHCP) allows systems to request and obtain an IP address and other configuration parameters from a server.

This guide recommends configuring networking on clients by manually editing the appropriate files under /etc/sysconfig. Use of DHCP can make client systems vulnerable to compromise by rogue DHCP servers, and should be avoided unless necessary. If using DHCP is necessary, however, there are best practices that should be followed to minimize security risk.
Group   Disable DHCP Server   Group contains 1 rule
[ref]   The DHCP server dhcpd is not installed or activated by default. If the software was installed and activated, but the system does not need to act as a DHCP server, it should be disabled and removed.

Rule   Uninstall DHCP Server Package   [ref]

If the system does not need to act as a DHCP server, the dhcp package can be uninstalled. The dhcp package can be removed with the following command:
$ sudo yum erase dhcp
Rationale:
Removing the DHCP server ensures that it cannot be easily or accidentally reactivated and disrupt network operation.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_dhcp_removed
Identifiers and References

References:  BP28(R1), 11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3


Complexity:low
Disruption:low
Strategy:disable

package --remove=dhcp

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure dhcp is removed
  package:
    name: dhcp
    state: absent
  tags:
    - NIST-800-53-CM-6(a)
    - NIST-800-53-CM-7(a)
    - NIST-800-53-CM-7(b)
    - disable_strategy
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - package_dhcp_removed

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove dhcp
#	   from the system, and may remove any packages
#	   that depend on dhcp. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

if rpm -q --quiet "dhcp" ; then

    yum remove -y "dhcp"

fi

Complexity:low
Disruption:low
Strategy:disable
include remove_dhcp

class remove_dhcp {
  package { 'dhcp':
    ensure => 'purged',
  }
}
Group   Mail Server Software   Group contains 1 rule
[ref]   Mail servers are used to send and receive email over the network. Mail is a very common service, and Mail Transfer Agents (MTAs) are obvious targets of network attack. Ensure that systems are not running MTAs unnecessarily, and configure needed MTAs as defensively as possible.

Very few systems at any site should be configured to directly receive email over the network. Users should instead use mail client programs to retrieve email from a central server that supports protocols such as IMAP or POP3. However, it is normal for most systems to be independently capable of sending email, for instance so that cron jobs can report output to an administrator. Most MTAs, including Postfix, support a submission-only mode in which mail can be sent from the local system to a central site MTA (or directly delivered to a local account), but the system still cannot receive mail directly over a network.

The alternatives program in Oracle Linux 8 permits selection of other mail server software (such as Sendmail), but Postfix is the default and is preferred. Postfix was coded with security in mind and can also be more effectively contained by SELinux as its modular design has resulted in separate processes performing specific actions. More information is available on its website, http://www.postfix.org.

Rule   Uninstall Sendmail Package   [ref]

Sendmail is not the default mail transfer agent and is not installed by default. The sendmail package can be removed with the following command:
$ sudo yum erase sendmail
Rationale:
The sendmail software was not developed with security in mind and its design prevents it from being effectively contained by SELinux. Postfix should be used instead.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_sendmail_removed
Identifiers and References

References:  BP28(R1), 11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, CCI-000381, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, SRG-OS-000480-GPOS-00227, SRG-OS-000095-GPOS-00049, OL08-00-040002, SV-248825r780041_rule


Complexity:low
Disruption:low
Strategy:disable

package --remove=sendmail

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure sendmail is removed
  package:
    name: sendmail
    state: absent
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - DISA-STIG-OL08-00-040002
    - NIST-800-53-CM-6(a)
    - NIST-800-53-CM-7(a)
    - NIST-800-53-CM-7(b)
    - disable_strategy
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - package_sendmail_removed

Complexity:low
Disruption:low
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# CAUTION: This remediation script will remove sendmail
#	   from the system, and may remove any packages
#	   that depend on sendmail. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

if rpm -q --quiet "sendmail" ; then

    yum remove -y "sendmail"

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Strategy:disable
include remove_sendmail

class remove_sendmail {
  package { 'sendmail':
    ensure => 'purged',
  }
}
Group   Obsolete Services   Group contains 6 groups and 10 rules
[ref]   This section discusses a number of network-visible services which have historically caused problems for system security, and for which disabling or severely limiting the service has been the best available guidance for some time. As a result of this, many of these services are not installed as part of Oracle Linux 8 by default.

Organizations which are running these services should switch to more secure equivalents as soon as possible. If it remains absolutely necessary to run one of these services for legacy reasons, care should be taken to restrict the service as much as possible, for instance by configuring host firewall software such as iptables to restrict access to the vulnerable service to only those remote hosts which have a known need to use it.
Group   Xinetd   Group contains 1 rule
[ref]   The xinetd service acts as a dedicated listener for some network services (mostly, obsolete ones) and can be used to provide access controls and perform some logging. It has been largely obsoleted by other features, and it is not installed by default. The older Inetd service is not even available as part of Oracle Linux 8.

Rule   Uninstall xinetd Package   [ref]

The xinetd package can be removed with the following command:
$ sudo yum erase xinetd
Rationale:
Removing the xinetd package decreases the risk of the xinetd service's accidental (or intentional) activation.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_package_xinetd_removed
Identifiers and References

References:  BP28(R1), 11, 12, 14, 15, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06, CCI-000305, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4


Complexity:low
Disruption:low
Strategy:disable

package --remove=xinetd

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure xinetd is removed
  package:
    name: xinetd
    state: absent
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
    - NIST-800-53-CM-6(a)
    - NIST-800-53-CM-7(a)
    - NIST-800-53-CM-7(b)
    - disable_strategy
    - low_complexity
    - low_disruption
    - low_severity
    - no_reboot_needed
    - package_xinetd_removed

Complexity:low
Disruption:low
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# CAUTION: This remediation script will remove xinetd
#	   from the system, and may remove any packages
#	   that depend on xinetd. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

if rpm -q --quiet "xinetd" ; then

    yum remove -y "xinetd"

fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Complexity:low
Disruption:low
Strategy:disable
include remove_xinetd

class remove_xinetd {
  package { 'xinetd':
    ensure => 'purged',
  }
}
Group   NIS   Group contains 2 rules
[ref]   The Network Information Service (NIS), also known as 'Yellow Pages' (YP), and its successor NIS+ have been made obsolete by Kerberos, LDAP, and other modern centralized authentication services. NIS should not be used because it suffers from security problems inherent in its design, such as inadequate protection of important authentication information.

Rule   Remove NIS Client   [ref]

The Network Information Service (NIS), formerly known as Yellow Pages, is a client-server directory service protocol used to distribute system configuration files. The NIS client (ypbind) was used to bind a system to an NIS server and receive the distributed configuration files.
Rationale:
The NIS service is inherently an insecure system that has been vulnerable to DOS attacks, buffer overflows and has poor authentication for querying NIS maps. NIS generally has been replaced by such protocols as Lightweight Directory Access Protocol (LDAP). It is recommended that the service be removed.
Severity: 
unknown
Rule ID:xccdf_org.ssgproject.content_rule_package_ypbind_removed
Identifiers and References

References:  BP28(R1), 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii)


Complexity:low
Disruption:low
Strategy:disable

package --remove=ypbind

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure ypbind is removed
  package:
    name: ypbind
    state: absent
  tags:
    - disable_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - package_ypbind_removed
    - unknown_severity

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove ypbind
#	   from the system, and may remove any packages
#	   that depend on ypbind. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

if rpm -q --quiet "ypbind" ; then

    yum remove -y "ypbind"

fi

Complexity:low
Disruption:low
Strategy:disable
include remove_ypbind

class remove_ypbind {
  package { 'ypbind':
    ensure => 'purged',
  }
}

Rule   Uninstall ypserv Package   [ref]

The ypserv package can be removed with the following command:
$ sudo yum erase ypserv
Rationale:
The NIS service provides an unencrypted authentication service which does not provide for the confidentiality and integrity of user passwords or the remote session. Removing the ypserv package decreases the risk of the accidental (or intentional) activation of NIS or NIS+ services.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_package_ypserv_removed
Identifiers and References

References:  BP28(R1), 11, 12, 14, 15, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06, CCI-000381, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), IA-5(1)(c), PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000095-GPOS-00049


Complexity:low
Disruption:low
Strategy:disable

package --remove=ypserv

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure ypserv is removed
  package:
    name: ypserv
    state: absent
  tags:
    - NIST-800-53-CM-6(a)
    - NIST-800-53-CM-7(a)
    - NIST-800-53-CM-7(b)
    - NIST-800-53-IA-5(1)(c)
    - disable_strategy
    - high_severity
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - package_ypserv_removed

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove ypserv
#	   from the system, and may remove any packages
#	   that depend on ypserv. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

if rpm -q --quiet "ypserv" ; then

    yum remove -y "ypserv"

fi

Complexity:low
Disruption:low
Strategy:disable
include remove_ypserv

class remove_ypserv {
  package { 'ypserv':
    ensure => 'purged',
  }
}
Group   Rlogin, Rsh, and Rexec   Group contains 2 rules
[ref]   The Berkeley r-commands are legacy services which allow cleartext remote access and have an insecure trust model.

Rule   Uninstall rsh-server Package   [ref]

The rsh-server package can be removed with the following command:
$ sudo yum erase rsh-server
Rationale:
The rsh-server service provides unencrypted remote access service which does not provide for the confidentiality and integrity of user passwords or the remote session and has very weak authentication. If a privileged user were to login using this service, the privileged user password could be compromised. The rsh-server package provides several obsolete and insecure network services. Removing it decreases the risk of those services' accidental (or intentional) activation.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_package_rsh-server_removed
Identifiers and References

References:  BP28(R1), 11, 12, 14, 15, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06, CCI-000381, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), IA-5(1)(c), PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000095-GPOS-00049, OL08-00-040010, SV-248827r780047_rule


Complexity:low
Disruption:low
Strategy:disable

package --remove=rsh-server

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure rsh-server is removed
  package:
    name: rsh-server
    state: absent
  tags:
    - DISA-STIG-OL08-00-040010
    - NIST-800-53-CM-6(a)
    - NIST-800-53-CM-7(a)
    - NIST-800-53-CM-7(b)
    - NIST-800-53-IA-5(1)(c)
    - disable_strategy
    - high_severity
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - package_rsh-server_removed

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove rsh-server
#	   from the system, and may remove any packages
#	   that depend on rsh-server. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

if rpm -q --quiet "rsh-server" ; then

    yum remove -y "rsh-server"

fi

Complexity:low
Disruption:low
Strategy:disable
include remove_rsh-server

class remove_rsh-server {
  package { 'rsh-server':
    ensure => 'purged',
  }
}

Rule   Uninstall rsh Package   [ref]

The rsh package contains the client commands for the rsh services
Rationale:
These legacy clients contain numerous security exposures and have been replaced with the more secure SSH package. Even if the server is removed, it is best to ensure the clients are also removed to prevent users from inadvertently attempting to use these commands and therefore exposing their credentials. Note that removing the rsh package removes the clients for rsh,rcp, and rlogin.
Severity: 
unknown
Rule ID:xccdf_org.ssgproject.content_rule_package_rsh_removed
Identifiers and References

References:  BP28(R1), 3.1.13, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), A.8.2.3, A.13.1.1, A.13.2.1, A.13.2.3, A.14.1.2, A.14.1.3


Complexity:low
Disruption:low
Strategy:disable

package --remove=rsh

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure rsh is removed
  package:
    name: rsh
    state: absent
  tags:
    - NIST-800-171-3.1.13
    - disable_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - package_rsh_removed
    - unknown_severity

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove rsh
#	   from the system, and may remove any packages
#	   that depend on rsh. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

if rpm -q --quiet "rsh" ; then

    yum remove -y "rsh"

fi

Complexity:low
Disruption:low
Strategy:disable
include remove_rsh

class remove_rsh {
  package { 'rsh':
    ensure => 'purged',
  }
}
Group   Chat/Messaging Services   Group contains 2 rules
[ref]   The talk software makes it possible for users to send and receive messages across systems through a terminal session.

Rule   Uninstall talk-server Package   [ref]

The talk-server package can be removed with the following command:
 $ sudo yum erase talk-server
Rationale:
The talk software presents a security risk as it uses unencrypted protocols for communications. Removing the talk-server package decreases the risk of the accidental (or intentional) activation of talk services.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_talk-server_removed
Identifiers and References

References:  BP28(R1), 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii)


Complexity:low
Disruption:low
Strategy:disable

package --remove=talk-server

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure talk-server is removed
  package:
    name: talk-server
    state: absent
  tags:
    - disable_strategy
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - package_talk-server_removed

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove talk-server
#	   from the system, and may remove any packages
#	   that depend on talk-server. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

if rpm -q --quiet "talk-server" ; then

    yum remove -y "talk-server"

fi

Complexity:low
Disruption:low
Strategy:disable
include remove_talk-server

class remove_talk-server {
  package { 'talk-server':
    ensure => 'purged',
  }
}

Rule   Uninstall talk Package   [ref]

The talk package contains the client program for the Internet talk protocol, which allows the user to chat with other users on different systems. Talk is a communication program which copies lines from one terminal to the terminal of another user. The talk package can be removed with the following command:
$ sudo yum erase talk
Rationale:
The talk software presents a security risk as it uses unencrypted protocols for communications. Removing the talk package decreases the risk of the accidental (or intentional) activation of talk client program.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_talk_removed
Identifiers and References

References:  BP28(R1), 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii)


Complexity:low
Disruption:low
Strategy:disable

package --remove=talk

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure talk is removed
  package:
    name: talk
    state: absent
  tags:
    - disable_strategy
    - low_complexity
    - low_disruption
    - medium_severity
    - no_reboot_needed
    - package_talk_removed

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove talk
#	   from the system, and may remove any packages
#	   that depend on talk. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

if rpm -q --quiet "talk" ; then

    yum remove -y "talk"

fi

Complexity:low
Disruption:low
Strategy:disable
include remove_talk

class remove_talk {
  package { 'talk':
    ensure => 'purged',
  }
}
Group   Telnet   Group contains 2 rules
[ref]   The telnet protocol does not provide confidentiality or integrity for information transmitted on the network. This includes authentication information such as passwords. Organizations which use telnet should be actively working to migrate to a more secure protocol.

Rule   Uninstall telnet-server Package   [ref]

The telnet-server package can be removed with the following command:
$ sudo yum erase telnet-server
Rationale:
It is detrimental for operating systems to provide, or install by default, functionality exceeding requirements or mission objectives. These unnecessary capabilities are often overlooked and therefore may remain unsecure. They increase the risk to the platform by providing additional attack vectors.
The telnet service provides an unencrypted remote access service which does not provide for the confidentiality and integrity of user passwords or the remote session. If a privileged user were to login using this service, the privileged user password could be compromised.
Removing the telnet-server package decreases the risk of the telnet service's accidental (or intentional) activation.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_package_telnet-server_removed
Identifiers and References

References:  BP28(R1), 11, 12, 14, 15, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06, CCI-000381, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000095-GPOS-00049, OL08-00-040000, SV-248823r780035_rule


Complexity:low
Disruption:low
Strategy:disable

package --remove=telnet-server

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure telnet-server is removed
  package:
    name: telnet-server
    state: absent
  tags:
    - DISA-STIG-OL08-00-040000
    - NIST-800-53-CM-6(a)
    - NIST-800-53-CM-7(a)
    - NIST-800-53-CM-7(b)
    - disable_strategy
    - high_severity
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - package_telnet-server_removed

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove telnet-server
#	   from the system, and may remove any packages
#	   that depend on telnet-server. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

if rpm -q --quiet "telnet-server" ; then

    yum remove -y "telnet-server"

fi

Complexity:low
Disruption:low
Strategy:disable
include remove_telnet-server

class remove_telnet-server {
  package { 'telnet-server':
    ensure => 'purged',
  }
}

Rule   Remove telnet Clients   [ref]

The telnet client allows users to start connections to other systems via the telnet protocol.
Rationale:
The telnet protocol is insecure and unencrypted. The use of an unencrypted transmission medium could allow an unauthorized user to steal credentials. The ssh package provides an encrypted session and stronger security and is included in Oracle Linux 8.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_package_telnet_removed
Identifiers and References

References:  BP28(R1), 3.1.13, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), A.8.2.3, A.13.1.1, A.13.2.1, A.13.2.3, A.14.1.2, A.14.1.3


Complexity:low
Disruption:low
Strategy:disable

package --remove=telnet

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure telnet is removed
  package:
    name: telnet
    state: absent
  tags:
    - NIST-800-171-3.1.13
    - disable_strategy
    - low_complexity
    - low_disruption
    - low_severity
    - no_reboot_needed
    - package_telnet_removed

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove telnet
#	   from the system, and may remove any packages
#	   that depend on telnet. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

if rpm -q --quiet "telnet" ; then

    yum remove -y "telnet"

fi

Complexity:low
Disruption:low
Strategy:disable
include remove_telnet

class remove_telnet {
  package { 'telnet':
    ensure => 'purged',
  }
}
Group   TFTP Server   Group contains 1 rule
[ref]   TFTP is a lightweight version of the FTP protocol which has traditionally been used to configure networking equipment. However, TFTP provides little security, and modern versions of networking operating systems frequently support configuration via SSH or other more secure protocols. A TFTP server should be run only if no more secure method of supporting existing equipment can be found.

Rule   Uninstall tftp-server Package   [ref]

The tftp-server package can be removed with the following command:
 $ sudo yum erase tftp-server
Rationale:
Removing the tftp-server package decreases the risk of the accidental (or intentional) activation of tftp services.

If TFTP is required for operational support (such as transmission of router configurations), its use must be documented with the Information Systems Securty Manager (ISSM), restricted to only authorized personnel, and have access control rules established.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_package_tftp-server_removed
Identifiers and References

References:  BP28(R1), 11, 12, 14, 15, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06, CCI-000318, CCI-000366, CCI-000368, CCI-001812, CCI-001813, CCI-001814, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227, OL08-00-040190, SV-248873r780185_rule


Complexity:low
Disruption:low
Strategy:disable

package --remove=tftp-server

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure tftp-server is removed
  package:
    name: tftp-server
    state: absent
  tags:
    - DISA-STIG-OL08-00-040190
    - NIST-800-53-CM-6(a)
    - NIST-800-53-CM-7(a)
    - NIST-800-53-CM-7(b)
    - disable_strategy
    - high_severity
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - package_tftp-server_removed

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove tftp-server
#	   from the system, and may remove any packages
#	   that depend on tftp-server. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

if rpm -q --quiet "tftp-server" ; then

    yum remove -y "tftp-server"

fi

Complexity:low
Disruption:low
Strategy:disable
include remove_tftp-server

class remove_tftp-server {
  package { 'tftp-server':
    ensure => 'purged',
  }
}
Red Hat and Red Hat Enterprise Linux are either registered trademarks or trademarks of Red Hat, Inc. in the United States and other countries. All other names are registered trademarks or trademarks of their respective companies.