Guide to the Secure Configuration of Ubuntu 20.04

with profile CIS Ubuntu 20.04 Level 1 Workstation Benchmark
This baseline aligns to the Center for Internet Security Ubuntu 20.04 LTS Benchmark, v1.0.0, released 07-21-2020.
The SCAP Security Guide Project
https://www.open-scap.org/security-policies/scap-security-guide
This guide presents a catalog of security-relevant configuration settings for Ubuntu 20.04. It is a rendering of content structured in the eXtensible Configuration Checklist Description Format (XCCDF) in order to support security automation. The SCAP content is is available in the scap-security-guide package which is developed at https://www.open-scap.org/security-policies/scap-security-guide.

Providing system administrators with such guidance informs them how to securely configure systems under their control in a variety of network roles. Policy makers and baseline creators can use this catalog of settings, with its associated references to higher-level security control catalogs, in order to assist them in security baseline creation. This guide is a catalog, not a checklist, and satisfaction of every item is not likely to be possible or sensible in many operational scenarios. However, the XCCDF format enables granular selection and adjustment of settings, and their association with OVAL and OCIL content provides an automated checking capability. Transformations of this document, and its associated automated checking content, are capable of providing baselines that meet a diverse set of policy objectives. Some example XCCDF Profiles, which are selections of items that form checklists and can be used as baselines, are available with this guide. They can be processed, in an automated fashion, with tools that support the Security Content Automation Protocol (SCAP). The DISA STIG, which provides required settings for US Department of Defense systems, is one example of a baseline created from this guidance.
Do not attempt to implement any of the settings in this guide without first testing them in a non-operational environment. The creators of this guidance assume no responsibility whatsoever for its use by other parties, and makes no guarantees, expressed or implied, about its quality, reliability, or any other characteristic.

Profile Information

Profile TitleCIS Ubuntu 20.04 Level 1 Workstation Benchmark
Profile IDxccdf_org.ssgproject.content_profile_cis_level1_workstation

CPE Platforms

  • cpe:/o:canonical:ubuntu_linux:20.04::~~lts~~~

Revision History

Current version: 0.1.68

  • draft (as of 2023-06-15)

Table of Contents

  1. System Settings
    1. Installing and Maintaining Software
    2. Account and Access Control
    3. AppArmor
    4. GRUB2 bootloader configuration
    5. Configure Syslog
    6. Network Configuration and Firewalls
    7. File Permissions and Masks
  2. Services
    1. Avahi Server
    2. Cron and At Daemons
    3. Deprecated services
    4. DHCP
    5. DNS Server
    6. FTP Server
    7. Web Server
    8. IMAP and POP3 Server
    9. LDAP
    10. Mail Server Software
    11. NFS and RPC
    12. Network Time Protocol
    13. Obsolete Services
    14. Print Support
    15. Proxy Server
    16. Samba(SMB) Microsoft Windows File Sharing Server
    17. SNMP Server
    18. SSH Server

Checklist

Group   Guide to the Secure Configuration of Ubuntu 20.04   Group contains 91 groups and 259 rules
Group   System Settings   Group contains 49 groups and 176 rules
[ref]   Contains rules that check correct system settings.
Group   Installing and Maintaining Software   Group contains 7 groups and 10 rules
[ref]   The following sections contain information on security-relevant choices during the initial operating system installation process and the setup of software updates.
Group   System and Software Integrity   Group contains 2 groups and 4 rules
[ref]   System and software integrity can be gained by installing antivirus, increasing system encryption strength with FIPS, verifying installed software, enabling SELinux, installing an Intrusion Prevention System, etc. However, installing or enabling integrity checking tools cannot prevent intrusions, but they can detect that an intrusion may have occurred. Requirements for integrity checking may be highly dependent on the environment in which the system will be used. Snapshot-based approaches such as AIDE may induce considerable overhead in the presence of frequent software updates.
Group   Software Integrity Checking   Group contains 1 group and 3 rules
[ref]   Both the AIDE (Advanced Intrusion Detection Environment) software and the RPM package management system provide mechanisms for verifying the integrity of installed software. AIDE uses snapshots of file metadata (such as hashes) and compares these to current system files in order to detect changes.

The RPM package management system can conduct integrity checks by comparing information in its metadata database with files installed on the system.
Group   Verify Integrity with AIDE   Group contains 3 rules
[ref]   AIDE conducts integrity checks by comparing information about files with previously-gathered information. Ideally, the AIDE database is created immediately after initial system configuration, and then again after any software update. AIDE is highly configurable, with further configuration information located in /usr/share/doc/aide-VERSION.

Rule   Install AIDE   [ref]

The aide package can be installed with the following command: 
$ apt-get install aide
Rationale:
The AIDE package must be installed if it is to be available for integrity checking.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_aide_installed
Identifiers and References

References:  BP28(R51), 1, 11, 12, 13, 14, 15, 16, 2, 3, 5, 7, 8, 9, 5.10.1.3, APO01.06, BAI01.06, BAI02.01, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS04.07, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.02, DSS06.06, CCI-002696, CCI-002699, CCI-001744, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 4.1, SR 6.2, SR 7.6, 1034, 1288, 1341, 1417, A.11.2.4, A.12.1.2, A.12.2.1, A.12.4.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.14.2.7, A.15.2.1, A.8.2.3, CM-6(a), DE.CM-1, DE.CM-7, PR.DS-1, PR.DS-6, PR.DS-8, PR.IP-1, PR.IP-3, Req-11.5, 11.5.2, SRG-OS-000445-GPOS-00199, UBTU-20-010450, 1.4.1



[[packages]]
name = "aide"
version = "*"

Complexity:low
Disruption:low
Strategy:enable
include install_aide

class install_aide {
  package { 'aide':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure aide is installed
  package:
    name: aide
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-20-010450
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_aide_installed

Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

DEBIAN_FRONTEND=noninteractive apt-get install -y "aide"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Build and Test AIDE Database   [ref]

Run the following command to generate a new database: 
$ sudo aideinit
By default, the database will be written to the file /var/lib/aide/aide.db.new. Storing the database, the configuration file /etc/aide.conf, and the binary /usr/bin/aide.wrapper (or hashes of these files), in a secure location (such as on read-only media) provides additional assurance about their integrity. The newly-generated database can be installed as follows: 
$ sudo cp /var/lib/aide/aide.db.new /var/lib/aide/aide.db
To initiate a manual check, run the following command: 
$ sudo /usr/bin/aide.wrapper --check
If this check produces any unexpected output, investigate.
Rationale:
For AIDE to be effective, an initial database of "known-good" information about files must be captured and it should be able to be verified against the installed files.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_aide_build_database
Identifiers and References

References:  BP28(R51), 1, 11, 12, 13, 14, 15, 16, 2, 3, 5, 7, 8, 9, 5.10.1.3, APO01.06, BAI01.06, BAI02.01, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS04.07, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 4.1, SR 6.2, SR 7.6, A.11.2.4, A.12.1.2, A.12.2.1, A.12.4.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.14.2.7, A.15.2.1, A.8.2.3, CM-6(a), DE.CM-1, DE.CM-7, PR.DS-1, PR.DS-6, PR.DS-8, PR.IP-1, PR.IP-3, Req-11.5, 11.5.2, SRG-OS-000445-GPOS-00199, 1.4.1


Complexity:low
Disruption:low
Strategy:restrict
- name: Ensure AIDE is installed
  package:
    name: '{{ item }}'
    state: present
  with_items:
  - aide
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.3
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Build and Test AIDE Database
  command: /usr/sbin/aideinit -y -f
  changed_when: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.3
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Check whether the stock AIDE Database exists
  stat:
    path: /var/lib/aide/aide.db.new.gz
  register: aide_database_stat
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.3
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Stage AIDE Database
  copy:
    src: /var/lib/aide/aide.db.new
    dest: /var/lib/aide/aide.db
    backup: true
    remote_src: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - (aide_database_stat.stat.exists is defined and aide_database_stat.stat.exists)
  tags:
  - CJIS-5.10.1.3
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_build_database
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

DEBIAN_FRONTEND=noninteractive apt-get install -y "aide"

AIDE_CONFIG=/etc/aide/aide.conf
DEFAULT_DB_PATH=/var/lib/aide/aide.db

# Fix db path in the config file, if necessary
if ! grep -q '^database=file:' ${AIDE_CONFIG}; then
    # replace_or_append gets confused by 'database=file' as a key, so should not be used.
    #replace_or_append "${AIDE_CONFIG}" '^database=file' "${DEFAULT_DB_PATH}" '@CCENUM@' '%s:%s'
    echo "database=file:${DEFAULT_DB_PATH}" >> ${AIDE_CONFIG}
fi

# Fix db out path in the config file, if necessary
if ! grep -q '^database_out=file:' ${AIDE_CONFIG}; then
    echo "database_out=file:${DEFAULT_DB_PATH}.new" >> ${AIDE_CONFIG}
fi

/usr/sbin/aideinit -y -f

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Configure Periodic Execution of AIDE   [ref]

At a minimum, AIDE should be configured to run a weekly scan. To implement a daily execution of AIDE at 4:05am using cron, add the following line to /etc/crontab: 
05 4 * * * root /usr/bin/aide.wrapper --config /etc/aide/aide.conf --check
To implement a weekly execution of AIDE at 4:05am using cron, add the following line to /etc/crontab: 
05 4 * * 0 root /usr/bin/aide.wrapper --config /etc/aide/aide.conf --check
AIDE can be executed periodically through other means; this is merely one example. The usage of cron's special time codes, such as @daily and @weekly is acceptable.
Rationale:
By default, AIDE does not install itself for periodic execution. Periodically running AIDE is necessary to reveal unexpected changes in installed files.

Unauthorized changes to the baseline configuration could make the system vulnerable to various attacks or allow unauthorized access to the operating system. Changes to operating system configurations can have unintended side effects, some of which may be relevant to security.

Detecting such changes and providing an automated response can help avoid unintended, negative consequences that could ultimately affect the security state of the operating system. The operating system's Information Management Officer (IMO)/Information System Security Officer (ISSO) and System Administrators (SAs) must be notified via email and/or monitoring system trap when there is an unauthorized modification of a configuration item.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_aide_periodic_cron_checking
Identifiers and References

References:  BP28(R51), 1, 11, 12, 13, 14, 15, 16, 2, 3, 5, 7, 8, 9, 5.10.1.3, APO01.06, BAI01.06, BAI02.01, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS04.07, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.02, DSS06.06, CCI-001744, CCI-002699, CCI-002702, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 4.1, SR 6.2, SR 7.6, A.11.2.4, A.12.1.2, A.12.2.1, A.12.4.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.14.2.7, A.15.2.1, A.8.2.3, SI-7, SI-7(1), CM-6(a), DE.CM-1, DE.CM-7, PR.DS-1, PR.DS-6, PR.DS-8, PR.IP-1, PR.IP-3, Req-11.5, 11.5.2, SRG-OS-000363-GPOS-00150, SRG-OS-000446-GPOS-00200, SRG-OS-000447-GPOS-00201, UBTU-20-010074, 1.4.2


Complexity:low
Disruption:low
Strategy:restrict
- name: Ensure AIDE is installed
  package:
    name:
    - aide
    - crontabs
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-20-010074
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set cron package name - RedHat
  set_fact:
    cron_pkg_name: cronie
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_os_family == "RedHat" or ansible_os_family == "Suse"
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-20-010074
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set cron package name - Debian
  set_fact:
    cron_pkg_name: cron
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_os_family == "Debian"
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-20-010074
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Install cron
  package:
    name: '{{ cron_pkg_name }}'
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-20-010074
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Configure Periodic Execution of AIDE
  cron:
    name: run AIDE check
    minute: 5
    hour: 4
    weekday: 0
    user: root
    job: /usr/bin/aide.wrapper --check
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.3
  - DISA-STIG-UBTU-20-010074
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SI-7
  - NIST-800-53-SI-7(1)
  - PCI-DSS-Req-11.5
  - PCI-DSSv4-11.5.2
  - aide_periodic_cron_checking
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

DEBIAN_FRONTEND=noninteractive apt-get install -y "aide"
DEBIAN_FRONTEND=noninteractive apt-get install -y "crontabs"

# AiDE usually adds its own cron jobs to /etc/cron.daily. If script is there, this rule is
# compliant. Otherwise, we copy the script to the /etc/cron.weekly
if ! egrep -q '^(\/usr\/bin\/)?aide(\.wrapper)?\s+' /etc/cron.*/*; then
    cp -f /usr/share/aide/config/cron.daily/aide /etc/cron.weekly/
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Disk Partitioning   Group contains 1 rule
[ref]   To ensure separation and protection of data, there are top-level system directories which should be placed on their own physical partition or logical volume. The installer's default partitioning scheme creates separate logical volumes for /, /boot, and swap.
  • If starting with any of the default layouts, check the box to \"Review and modify partitioning.\" This allows for the easy creation of additional logical volumes inside the volume group already created, though it may require making /'s logical volume smaller to create space. In general, using logical volumes is preferable to using partitions because they can be more easily adjusted later.
  • If creating a custom layout, create the partitions mentioned in the previous paragraph (which the installer will require anyway), as well as separate ones described in the following sections.
If a system has already been installed, and the default partitioning scheme was used, it is possible but nontrivial to modify it to create separate logical volumes for the directories listed above. The Logical Volume Manager (LVM) makes this possible. See the LVM HOWTO at http://tldp.org/HOWTO/LVM-HOWTO/ for more detailed information on LVM.

Rule   Ensure /tmp Located On Separate Partition   [ref]

The /tmp directory is a world-writable directory used for temporary file storage. Ensure it has its own partition or logical volume at installation time, or migrate it using LVM.
Rationale:
The /tmp partition is used as temporary storage by many programs. Placing /tmp in its own partition enables the setting of more restrictive mount options, which can help protect programs which use it.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_partition_for_tmp
Identifiers and References

References:  BP28(R12), 12, 15, 8, APO13.01, DSS05.02, CCI-000366, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.13.1.1, A.13.2.1, A.14.1.3, CM-6(a), SC-5(2), PR.PT-4, SRG-OS-000480-GPOS-00227, 1.1.2

Group   GNOME Desktop Environment   Group contains 1 group and 2 rules
[ref]   GNOME is a graphical desktop environment bundled with many Linux distributions that allow users to easily interact with the operating system graphically rather than textually. The GNOME Graphical Display Manager (GDM) provides login, logout, and user switching contexts as well as display server management.

GNOME is developed by the GNOME Project and is considered the default Red Hat Graphical environment.

For more information on GNOME and the GNOME Project, see https://www.gnome.org.
Group   Configure GNOME Login Screen   Group contains 1 rule

Rule   Disable the GNOME3 Login User List   [ref]

In the default graphical environment, users logging directly into the system are greeted with a login screen that displays all known users. This functionality should be disabled by setting disable-user-list to true.

To disable, add or edit disable-user-list to /etc/dconf/db/gdm.d/00-security-settings. For example: 
[org/gnome/login-screen]
disable-user-list=true
Once the setting has been added, add a lock to /etc/dconf/db/gdm.d/locks/00-security-settings-lock to prevent user modification. For example: 
/org/gnome/login-screen/disable-user-list
After the settings have been set, run dconf update.
Rationale:
Leaving the user list enabled is a security risk since it allows anyone with physical access to the system to quickly enumerate known user accounts without logging in.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_dconf_gnome_disable_user_list
Identifiers and References

References:  CM-6(a), AC-23, SRG-OS-000480-GPOS-00227, 1.10


# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'gdm3' 2>/dev/null | grep -q installed && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/login-screen\\]" "/etc/dconf/db/" \
                                | grep -v 'distro\|ibus\|gdm.d' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/gdm.d/00-security-settings"
DBDIR="/etc/dconf/db/gdm.d"

mkdir -p "${DBDIR}"

# Comment out the configurations in databases different from the target one
if [ "${#SETTINGSFILES[@]}" -ne 0 ]
then
    if grep -q "^\\s*disable-user-list\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -Ei "s/(^\s*)disable-user-list(\s*=)/#\1disable-user-list\2/g" "${SETTINGSFILES[@]}"
    fi
fi


[ ! -z "${DCONFFILE}" ] && echo "" >> "${DCONFFILE}"
if ! grep -q "\\[org/gnome/login-screen\\]" "${DCONFFILE}"
then
    printf '%s\n' "[org/gnome/login-screen]" >> ${DCONFFILE}
fi

escaped_value="$(sed -e 's/\\/\\\\/g' <<< "true")"
if grep -q "^\\s*disable-user-list\\s*=" "${DCONFFILE}"
then
        sed -i "s/\\s*disable-user-list\\s*=\\s*.*/disable-user-list=${escaped_value}/g" "${DCONFFILE}"
    else
        sed -i "\\|\\[org/gnome/login-screen\\]|a\\disable-user-list=${escaped_value}" "${DCONFFILE}"
fi

dconf update
# Check for setting in any of the DConf db directories
LOCKFILES=$(grep -r "^/org/gnome/login-screen/disable-user-list$" "/etc/dconf/db/" \
            | grep -v 'distro\|ibus\|gdm.d' | grep ":" | cut -d":" -f1)
LOCKSFOLDER="/etc/dconf/db/gdm.d/locks"

mkdir -p "${LOCKSFOLDER}"

# Comment out the configurations in databases different from the target one
if [[ ! -z "${LOCKFILES}" ]]
then
    sed -i -E "s|^/org/gnome/login-screen/disable-user-list$|#&|" "${LOCKFILES[@]}"
fi

if ! grep -qr "^/org/gnome/login-screen/disable-user-list$" /etc/dconf/db/gdm.d/
then
    echo "/org/gnome/login-screen/disable-user-list" >> "/etc/dconf/db/gdm.d/locks/00-security-settings-lock"
fi

dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Sudo   Group contains 3 rules
[ref]   Sudo, which stands for "su 'do'", provides the ability to delegate authority to certain users, groups of users, or system administrators. When configured for system users and/or groups, Sudo can allow a user or group to execute privileged commands that normally only root is allowed to execute.

For more information on Sudo and addition Sudo configuration options, see https://www.sudo.ws.

Rule   Install sudo Package   [ref]

The sudo package can be installed with the following command: 
$ apt-get install sudo
Rationale:
sudo is a program designed to allow a system administrator to give limited root privileges to users and log root activity. The basic philosophy is to give as few privileges as possible but still allow system users to get their work done.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_sudo_installed
Identifiers and References

References:  BP28(R19), 1382, 1384, 1386, CM-6(a), FMT_MOF_EXT.1, 10.2.1.5, SRG-OS-000324-GPOS-00125, 1.3.1



[[packages]]
name = "sudo"
version = "*"

Complexity:low
Disruption:low
Strategy:enable
include install_sudo

class install_sudo {
  package { 'sudo':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure sudo is installed
  package:
    name: sudo
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-10.2.1.5
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_sudo_installed

Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

DEBIAN_FRONTEND=noninteractive apt-get install -y "sudo"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure Only Users Logged In To Real tty Can Execute Sudo - sudo use_pty   [ref]

The sudo use_pty tag, when specified, will only execute sudo commands from users logged in to a real tty. This should be enabled by making sure that the use_pty tag exists in /etc/sudoers configuration file or any sudo configuration snippets in /etc/sudoers.d/.
Rationale:
Requiring that sudo commands be run in a pseudo-terminal can prevent an attacker from retaining access to the user's terminal after the main program has finished executing.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sudo_add_use_pty
Identifiers and References

References:  BP28(R58), Req-10.2.5, 10.2.1.5, 1.3.2


Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_add_use_pty

- name: Ensure use_pty is enabled in /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    regexp: ^[\s]*Defaults.*\buse_pty\b.*$
    line: Defaults use_pty
    validate: /usr/sbin/visudo -cf %s
  when: '"sudo" in ansible_facts.packages'
  tags:
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_add_use_pty

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'sudo' 2>/dev/null | grep -q installed; then

if /usr/sbin/visudo -qcf /etc/sudoers; then
    cp /etc/sudoers /etc/sudoers.bak
    if ! grep -P '^[\s]*Defaults[\s]*\buse_pty\b.*$' /etc/sudoers; then
        # sudoers file doesn't define Option use_pty
        echo "Defaults use_pty" >> /etc/sudoers
    fi
    
    # Check validity of sudoers and cleanup bak
    if /usr/sbin/visudo -qcf /etc/sudoers; then
        rm -f /etc/sudoers.bak
    else
        echo "Fail to validate remediated /etc/sudoers, reverting to original file."
        mv /etc/sudoers.bak /etc/sudoers
        false
    fi
else
    echo "Skipping remediation, /etc/sudoers failed to validate"
    false
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure Sudo Logfile Exists - sudo logfile   [ref]

A custom log sudo file can be configured with the 'logfile' tag. This rule configures a sudo custom logfile at the default location suggested by CIS, which uses /var/log/sudo.log.
Rationale:
A sudo log file simplifies auditing of sudo commands.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_sudo_custom_logfile
Identifiers and References

References:  Req-10.2.5, 10.2.1.5, 1.3.3


Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_custom_logfile
- name: XCCDF Value var_sudo_logfile # promote to variable
  set_fact:
    var_sudo_logfile: !!str /var/log/sudo.log
  tags:
    - always

- name: Ensure logfile is enabled with the appropriate value in /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    regexp: ^[\s]*Defaults\s(.*)\blogfile=[-]?.+\b(.*)$
    line: Defaults \1logfile={{ var_sudo_logfile }}\2
    validate: /usr/sbin/visudo -cf %s
    backrefs: true
  register: edit_sudoers_logfile_option
  when: '"sudo" in ansible_facts.packages'
  tags:
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_custom_logfile

- name: Enable logfile option with appropriate value in /etc/sudoers
  lineinfile:
    path: /etc/sudoers
    line: Defaults logfile={{ var_sudo_logfile }}
    validate: /usr/sbin/visudo -cf %s
  when:
  - '"sudo" in ansible_facts.packages'
  - edit_sudoers_logfile_option is defined and not edit_sudoers_logfile_option.changed
  tags:
  - PCI-DSS-Req-10.2.5
  - PCI-DSSv4-10.2.1.5
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - restrict_strategy
  - sudo_custom_logfile

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'sudo' 2>/dev/null | grep -q installed; then

var_sudo_logfile='/var/log/sudo.log'


if /usr/sbin/visudo -qcf /etc/sudoers; then
    cp /etc/sudoers /etc/sudoers.bak
    if ! grep -P '^[\s]*Defaults[\s]*\blogfile=("(?:\\"|\\\\|[^"\\\n])*"\B|[^"](?:(?:\\,|\\"|\\ |\\\\|[^", \\\n])*)\b)\b.*$' /etc/sudoers; then
        # sudoers file doesn't define Option logfile
        echo "Defaults logfile=${var_sudo_logfile}" >> /etc/sudoers
    else
        # sudoers file defines Option logfile, remediate if appropriate value is not set
        if ! grep -P "^[\s]*Defaults.*\blogfile=${var_sudo_logfile}\b.*$" /etc/sudoers; then
            
            escaped_variable=${var_sudo_logfile//$'/'/$'\/'}
            sed -Ei "s/(^[\s]*Defaults.*\blogfile=)[-]?.+(\b.*$)/\1$escaped_variable\2/" /etc/sudoers
        fi
    fi
    
    # Check validity of sudoers and cleanup bak
    if /usr/sbin/visudo -qcf /etc/sudoers; then
        rm -f /etc/sudoers.bak
    else
        echo "Fail to validate remediated /etc/sudoers, reverting to original file."
        mv /etc/sudoers.bak /etc/sudoers
        false
    fi
else
    echo "Skipping remediation, /etc/sudoers failed to validate"
    false
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Account and Access Control   Group contains 14 groups and 60 rules
[ref]   In traditional Unix security, if an attacker gains shell access to a certain login account, they can perform any action or access any file to which that account has access. Therefore, making it more difficult for unauthorized people to gain shell access to accounts, particularly to privileged accounts, is a necessary part of securing a system. This section introduces mechanisms for restricting access to accounts under Ubuntu 20.04.
Group   Warning Banners for System Accesses   Group contains 1 group and 14 rules
[ref]   Each system should expose as little information about itself as possible.

System banners, which are typically displayed just before a login prompt, give out information about the service or the host's operating system. This might include the distribution name and the system kernel version, and the particular version of a network service. This information can assist intruders in gaining access to the system as it can reveal whether the system is running vulnerable software. Most network services can be configured to limit what information is displayed.

Many organizations implement security policies that require a system banner provide notice of the system's ownership, provide warning to unauthorized users, and remind authorized users of their consent to monitoring.
Group   Implement a GUI Warning Banner   Group contains 2 rules

Rule   Enable GNOME3 Login Warning Banner   [ref]

In the default graphical environment, displaying a login warning banner in the GNOME Display Manager's login screen can be enabled on the login screen by setting banner-message-enable to true.

To enable, add or edit banner-message-enable to /etc/dconf/db/gdm.d/00-security-settings. For example: 
[org/gnome/login-screen]
banner-message-enable=true
Once the setting has been added, add a lock to /etc/dconf/db/gdm.d/locks/00-security-settings-lock to prevent user modification. For example: 
/org/gnome/login-screen/banner-message-enable
After the settings have been set, run dconf update. The banner text must also be set.
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.

For U.S. Government systems, system use notifications are required only for access via login interfaces with human users and are not required when such human interfaces do not exist.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_dconf_gnome_banner_enabled
Identifiers and References

References:  1, 12, 15, 16, DSS05.04, DSS05.10, DSS06.10, 3.1.9, CCI-000048, CCI-000050, CCI-001384, CCI-001385, CCI-001386, CCI-001387, CCI-001388, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, AC-8(a), AC-8(b), AC-8(c), PR.AC-7, FMT_MOF_EXT.1, SRG-OS-000023-GPOS-00006, SRG-OS-000228-GPOS-00088, UBTU-20-010002, 1.10


# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'gdm3' 2>/dev/null | grep -q installed; then

# Check for setting in any of the DConf db directories
# If files contain ibus or distro, ignore them.
# The assignment assumes that individual filenames don't contain :
readarray -t SETTINGSFILES < <(grep -r "\\[org/gnome/login-screen\\]" "/etc/dconf/db/" \
                                | grep -v 'distro\|ibus\|gdm.d' | cut -d":" -f1)
DCONFFILE="/etc/dconf/db/gdm.d/00-security-settings"
DBDIR="/etc/dconf/db/gdm.d"

mkdir -p "${DBDIR}"

# Comment out the configurations in databases different from the target one
if [ "${#SETTINGSFILES[@]}" -ne 0 ]
then
    if grep -q "^\\s*banner-message-enable\\s*=" "${SETTINGSFILES[@]}"
    then
        
        sed -Ei "s/(^\s*)banner-message-enable(\s*=)/#\1banner-message-enable\2/g" "${SETTINGSFILES[@]}"
    fi
fi


[ ! -z "${DCONFFILE}" ] && echo "" >> "${DCONFFILE}"
if ! grep -q "\\[org/gnome/login-screen\\]" "${DCONFFILE}"
then
    printf '%s\n' "[org/gnome/login-screen]" >> ${DCONFFILE}
fi

escaped_value="$(sed -e 's/\\/\\\\/g' <<< "true")"
if grep -q "^\\s*banner-message-enable\\s*=" "${DCONFFILE}"
then
        sed -i "s/\\s*banner-message-enable\\s*=\\s*.*/banner-message-enable=${escaped_value}/g" "${DCONFFILE}"
    else
        sed -i "\\|\\[org/gnome/login-screen\\]|a\\banner-message-enable=${escaped_value}" "${DCONFFILE}"
fi

dconf update
# Check for setting in any of the DConf db directories
LOCKFILES=$(grep -r "^/org/gnome/login-screen/banner-message-enable$" "/etc/dconf/db/" \
            | grep -v 'distro\|ibus\|gdm.d' | grep ":" | cut -d":" -f1)
LOCKSFOLDER="/etc/dconf/db/gdm.d/locks"

mkdir -p "${LOCKSFOLDER}"

# Comment out the configurations in databases different from the target one
if [[ ! -z "${LOCKFILES}" ]]
then
    sed -i -E "s|^/org/gnome/login-screen/banner-message-enable$|#&|" "${LOCKFILES[@]}"
fi

if ! grep -qr "^/org/gnome/login-screen/banner-message-enable$" /etc/dconf/db/gdm.d/
then
    echo "/org/gnome/login-screen/banner-message-enable" >> "/etc/dconf/db/gdm.d/locks/00-security-settings-lock"
fi

dconf update

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Modify the System Login Banner   [ref]

To configure the system login banner edit /etc/issue. Replace the default text with a message compliant with the local site policy or a legal disclaimer. The DoD required text is either:

You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions:
-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.
-At any time, the USG may inspect and seize data stored on this IS.
-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.
-This IS includes security measures (e.g., authentication and access controls) to protect USG interests -- not for your personal benefit or privacy.
-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.

OR:

I've read & consent to terms in IS user agreem't.
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.

System use notifications are required only for access via login interfaces with human users and are not required when such human interfaces do not exist.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_banner_etc_issue
Identifiers and References

References:  1, 12, 15, 16, DSS05.04, DSS05.10, DSS06.10, 3.1.9, CCI-000048, CCI-000050, CCI-001384, CCI-001385, CCI-001386, CCI-001387, CCI-001388, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, AC-8(a), AC-8(c), PR.AC-7, FMT_MOF_EXT.1, SRG-OS-000023-GPOS-00006, SRG-OS-000228-GPOS-00088, 1.8.1.2


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

login_banner_text='^Authorized[\s\n]+uses[\s\n]+only\.[\s\n]+All[\s\n]+activity[\s\n]+may[\s\n]+be[\s\n]+monitored[\s\n]+and[\s\n]+reported\.$'


# Multiple regexes transform the banner regex into a usable banner
# 0 - Remove anchors around the banner text
login_banner_text=$(echo "$login_banner_text" | sed 's/^\^\(.*\)\$$/\1/g')
# 1 - Keep only the first banners if there are multiple
#    (dod_banners contains the long and short banner)
login_banner_text=$(echo "$login_banner_text" | sed 's/^(\(.*\.\)|.*)$/\1/g')
# 2 - Add spaces ' '. (Transforms regex for "space or newline" into a " ")
login_banner_text=$(echo "$login_banner_text" | sed 's/\[\\s\\n\]+/ /g')
# 3 - Adds newlines. (Transforms "(?:\[\\n\]+|(?:\\n)+)" into "\n")
login_banner_text=$(echo "$login_banner_text" | sed 's/(?:\[\\n\]+|(?:\\\\n)+)/\n/g')
# 4 - Remove any leftover backslash. (From any parethesis in the banner, for example).
login_banner_text=$(echo "$login_banner_text" | sed 's/\\//g')
formatted=$(echo "$login_banner_text" | fold -sw 80)

cat <<EOF >/etc/issue
$formatted
EOF

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Modify the System Login Banner for Remote Connections   [ref]

To configure the system login banner edit /etc/issue.net. Replace the default text with a message compliant with the local site policy or a legal disclaimer. The DoD required text is either:

You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions:
-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.
-At any time, the USG may inspect and seize data stored on this IS.
-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.
-This IS includes security measures (e.g., authentication and access controls) to protect USG interests -- not for your personal benefit or privacy.
-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.

OR:

I've read & consent to terms in IS user agreem't.
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.

System use notifications are required only for access via login interfaces with human users and are not required when such human interfaces do not exist.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_banner_etc_issue_net
Identifiers and References

References:  CCI-000048, CCI-001384, CCI-001385, CCI-001386, CCI-001387, CCI-001388, SRG-OS-000023-GPOS-00006, SRG-OS-000228-GPOS-00088, UBTU-20-010038, 1.8.1.3


Complexity:low
Disruption:medium
- name: XCCDF Value remote_login_banner_text # promote to variable
  set_fact:
    remote_login_banner_text: !!str ^Authorized[\s\n]+uses[\s\n]+only\.[\s\n]+All[\s\n]+activity[\s\n]+may[\s\n]+be[\s\n]+monitored[\s\n]+and[\s\n]+reported\.$
  tags:
    - always

- name: Modify the System Login Banner for Remote Connections - ensure correct banner
  copy:
    dest: /etc/issue.net
    content: '{{ remote_login_banner_text | regex_replace("^\^(.*)\$$", "\1") | regex_replace("^\((.*\.)\|.*\)$",
      "\1") | regex_replace("\[\\s\\n\]\+"," ") | regex_replace("\(\?:\[\\n\]\+\|\(\?:\\\\n\)\+\)",
      "\n") | regex_replace("\\", "") | wordwrap() }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - DISA-STIG-UBTU-20-010038
  - banner_etc_issue_net
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - unknown_strategy


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

remote_login_banner_text='^Authorized[\s\n]+uses[\s\n]+only\.[\s\n]+All[\s\n]+activity[\s\n]+may[\s\n]+be[\s\n]+monitored[\s\n]+and[\s\n]+reported\.$'


# Multiple regexes transform the banner regex into a usable banner
# 0 - Remove anchors around the banner text
remote_login_banner_text=$(echo "$remote_login_banner_text" | sed 's/^\^\(.*\)\$$/\1/g')
# 1 - Keep only the first banners if there are multiple
#    (dod_banners contains the long and short banner)
remote_login_banner_text=$(echo "$remote_login_banner_text" | sed 's/^(\(.*\.\)|.*)$/\1/g')
# 2 - Add spaces ' '. (Transforms regex for "space or newline" into a " ")
remote_login_banner_text=$(echo "$remote_login_banner_text" | sed 's/\[\\s\\n\]+/ /g')
# 3 - Adds newlines. (Transforms "(?:\[\\n\]+|(?:\\n)+)" into "\n")
remote_login_banner_text=$(echo "$remote_login_banner_text" | sed 's/(?:\[\\n\]+|(?:\\\\n)+)/\n/g')
# 4 - Remove any leftover backslash. (From any parethesis in the banner, for example).
remote_login_banner_text=$(echo "$remote_login_banner_text" | sed 's/\\//g')
formatted=$(echo "$remote_login_banner_text" | fold -sw 80)

cat <<EOF >/etc/issue.net
$formatted
EOF

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Modify the System Message of the Day Banner   [ref]

To configure the system message banner edit /etc/motd. Replace the default text with a message compliant with the local site policy or a legal disclaimer. The DoD required text is either:

You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions:
-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.
-At any time, the USG may inspect and seize data stored on this IS.
-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.
-This IS includes security measures (e.g., authentication and access controls) to protect USG interests -- not for your personal benefit or privacy.
-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.

OR:

I've read & consent to terms in IS user agreem't.
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.

System use notifications are required only for access via login interfaces with human users and are not required when such human interfaces do not exist.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_banner_etc_motd
Identifiers and References

References:  1.8.1.1


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

motd_banner_text='^Authorized[\s\n]+uses[\s\n]+only\.[\s\n]+All[\s\n]+activity[\s\n]+may[\s\n]+be[\s\n]+monitored[\s\n]+and[\s\n]+reported\.$'


# Multiple regexes transform the banner regex into a usable banner
# 0 - Remove anchors around the banner text
motd_banner_text=$(echo "$motd_banner_text" | sed 's/^\^\(.*\)\$$/\1/g')
# 1 - Keep only the first banners if there are multiple
#    (dod_banners contains the long and short banner)
motd_banner_text=$(echo "$motd_banner_text" | sed 's/^(\(.*\.\)|.*)$/\1/g')
# 2 - Add spaces ' '. (Transforms regex for "space or newline" into a " ")
motd_banner_text=$(echo "$motd_banner_text" | sed 's/\[\\s\\n\]+/ /g')
# 3 - Adds newlines. (Transforms "(?:\[\\n\]+|(?:\\n)+)" into "\n")
motd_banner_text=$(echo "$motd_banner_text" | sed 's/(?:\[\\n\]+|(?:\\\\n)+)/\n/g')
# 4 - Remove any leftover backslash. (From any parethesis in the banner, for example).
motd_banner_text=$(echo "$motd_banner_text" | sed 's/\\//g')
formatted=$(echo "$motd_banner_text" | fold -sw 80)

cat <<EOF >/etc/motd
$formatted
EOF

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Group Ownership of System Login Banner   [ref]

To properly set the group owner of /etc/issue, run the command: 
$ sudo chgrp root /etc/issue
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper group ownership will ensure that only root user can modify the banner.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_etc_issue
Identifiers and References

References:  1.8.1.5


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/issue
  stat:
    path: /etc/issue
  register: file_exists
  tags:
  - configure_strategy
  - file_groupowner_etc_issue
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/issue
  file:
    path: /etc/issue
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - configure_strategy
  - file_groupowner_etc_issue
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
chgrp 0 /etc/issue

Rule   Verify Group Ownership of System Login Banner for Remote Connections   [ref]

To properly set the group owner of /etc/issue.net, run the command: 
$ sudo chgrp root /etc/issue.net
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper group ownership will ensure that only root user can modify the banner.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_etc_issue_net
Identifiers and References

References:  1.8.1.6


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/issue.net
  stat:
    path: /etc/issue.net
  register: file_exists
  tags:
  - configure_strategy
  - file_groupowner_etc_issue_net
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/issue.net
  file:
    path: /etc/issue.net
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - configure_strategy
  - file_groupowner_etc_issue_net
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
chgrp 0 /etc/issue.net

Rule   Verify Group Ownership of Message of the Day Banner   [ref]

To properly set the group owner of /etc/motd, run the command: 
$ sudo chgrp root /etc/motd
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper group ownership will ensure that only root user can modify the banner.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_etc_motd
Identifiers and References

References:  1.8.1.4


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/motd
  stat:
    path: /etc/motd
  register: file_exists
  tags:
  - configure_strategy
  - file_groupowner_etc_motd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/motd
  file:
    path: /etc/motd
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - configure_strategy
  - file_groupowner_etc_motd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
chgrp 0 /etc/motd

Rule   Verify ownership of System Login Banner   [ref]

To properly set the owner of /etc/issue, run the command: 
$ sudo chown root /etc/issue
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper ownership will ensure that only root user can modify the banner.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_etc_issue
Identifiers and References

References:  1.8.1.5


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/issue
  stat:
    path: /etc/issue
  register: file_exists
  tags:
  - configure_strategy
  - file_owner_etc_issue
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/issue
  file:
    path: /etc/issue
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - configure_strategy
  - file_owner_etc_issue
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
chown 0 /etc/issue

Rule   Verify ownership of System Login Banner for Remote Connections   [ref]

To properly set the owner of /etc/issue.net, run the command: 
$ sudo chown root /etc/issue.net
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper ownership will ensure that only root user can modify the banner.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_etc_issue_net
Identifiers and References

References:  1.8.1.6


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/issue.net
  stat:
    path: /etc/issue.net
  register: file_exists
  tags:
  - configure_strategy
  - file_owner_etc_issue_net
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/issue.net
  file:
    path: /etc/issue.net
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - configure_strategy
  - file_owner_etc_issue_net
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
chown 0 /etc/issue.net

Rule   Verify ownership of Message of the Day Banner   [ref]

To properly set the owner of /etc/motd, run the command: 
$ sudo chown root /etc/motd
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper ownership will ensure that only root user can modify the banner.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_etc_motd
Identifiers and References

References:  1.8.1.4


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/motd
  stat:
    path: /etc/motd
  register: file_exists
  tags:
  - configure_strategy
  - file_owner_etc_motd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/motd
  file:
    path: /etc/motd
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - configure_strategy
  - file_owner_etc_motd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
chown 0 /etc/motd

Rule   Verify permissions on System Login Banner   [ref]

To properly set the permissions of /etc/issue, run the command: 
$ sudo chmod 0644 /etc/issue
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper permissions will ensure that only root user can modify the banner.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_etc_issue
Identifiers and References

References:  1.8.1.5


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/issue
  stat:
    path: /etc/issue
  register: file_exists
  tags:
  - configure_strategy
  - file_permissions_etc_issue
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwt on /etc/issue
  file:
    path: /etc/issue
    mode: u-xs,g-xws,o-xwt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - configure_strategy
  - file_permissions_etc_issue
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure





chmod u-xs,g-xws,o-xwt /etc/issue

Rule   Verify permissions on System Login Banner for Remote Connections   [ref]

To properly set the permissions of /etc/issue.net, run the command: 
$ sudo chmod 0644 /etc/issue.net
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper permissions will ensure that only root user can modify the banner.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_etc_issue_net
Identifiers and References

References:  1.8.1.6


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/issue.net
  stat:
    path: /etc/issue.net
  register: file_exists
  tags:
  - configure_strategy
  - file_permissions_etc_issue_net
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwt on /etc/issue.net
  file:
    path: /etc/issue.net
    mode: u-xs,g-xws,o-xwt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - configure_strategy
  - file_permissions_etc_issue_net
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure





chmod u-xs,g-xws,o-xwt /etc/issue.net

Rule   Verify permissions on Message of the Day Banner   [ref]

To properly set the permissions of /etc/motd, run the command: 
$ sudo chmod 0644 /etc/motd
Rationale:
Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.
Proper permissions will ensure that only root user can modify the banner.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_etc_motd
Identifiers and References

References:  1.8.1.4


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/motd
  stat:
    path: /etc/motd
  register: file_exists
  tags:
  - configure_strategy
  - file_permissions_etc_motd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwt on /etc/motd
  file:
    path: /etc/motd
    mode: u-xs,g-xws,o-xwt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - configure_strategy
  - file_permissions_etc_motd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure





chmod u-xs,g-xws,o-xwt /etc/motd
Group   Protect Accounts by Configuring PAM   Group contains 3 groups and 10 rules
[ref]   PAM, or Pluggable Authentication Modules, is a system which implements modular authentication for Linux programs. PAM provides a flexible and configurable architecture for authentication, and it should be configured to minimize exposure to unnecessary risk. This section contains guidance on how to accomplish that.

PAM is implemented as a set of shared objects which are loaded and invoked whenever an application wishes to authenticate a user. Typically, the application must be running as root in order to take advantage of PAM, because PAM's modules often need to be able to access sensitive stores of account information, such as /etc/shadow. Traditional privileged network listeners (e.g. sshd) or SUID programs (e.g. sudo) already meet this requirement. An SUID root application, userhelper, is provided so that programs which are not SUID or privileged themselves can still take advantage of PAM.

PAM looks in the directory /etc/pam.d for application-specific configuration information. For instance, if the program login attempts to authenticate a user, then PAM's libraries follow the instructions in the file /etc/pam.d/login to determine what actions should be taken.

One very important file in /etc/pam.d is /etc/pam.d/system-auth. This file, which is included by many other PAM configuration files, defines 'default' system authentication measures. Modifying this file is a good way to make far-reaching authentication changes, for instance when implementing a centralized authentication service.
Warning:  Be careful when making changes to PAM's configuration files. The syntax for these files is complex, and modifications can have unexpected consequences. The default configurations shipped with applications should be sufficient for most users.
Warning:  Running authconfig or system-config-authentication will re-write the PAM configuration files, destroying any manually made changes and replacing them with a series of system defaults. One reference to the configuration file syntax can be found at https://fossies.org/linux/Linux-PAM-docs/doc/sag/Linux-PAM_SAG.pdf.
Group   Set Lockouts for Failed Password Attempts   Group contains 2 rules
[ref]   The pam_faillock PAM module provides the capability to lock out user accounts after a number of failed login attempts. Its documentation is available in /usr/share/doc/pam-VERSION/txts/README.pam_faillock.

Warning:  Locking out user accounts presents the risk of a denial-of-service attack. The lockout policy must weigh whether the risk of such a denial-of-service attack outweighs the benefits of thwarting password guessing attacks.

Rule   Limit Password Reuse   [ref]

Do not allow users to reuse recent passwords. This can be accomplished by using the remember option for the pam_pwhistory PAM modules.

In the file /etc/pam.d/common-password, make sure the parameters remember and use_authtok are present, and that the value for the remember parameter is 5 or greater. For example: 
password requisite pam_pwhistory.so ...existing_options... remember=5 use_authtok
The DoD STIG requirement is 5 passwords.
Rationale:
Preventing re-use of previous passwords helps ensure that a compromised password is not re-used by a user.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_pwhistory_remember
Identifiers and References

References:  CCI-000200, SRG-OS-000077-GPOS-00045, 5.3.3


Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'libpam-runtime' 2>/dev/null | grep -q installed; then

declare -a VALUES=()
declare -a VALUE_NAMES=()
declare -a ARGS=()
declare -a NEW_ARGS=()

var_password_pam_remember='5'

VALUES+=("$var_password_pam_remember")
VALUE_NAMES+=("remember")
ARGS+=("")
NEW_ARGS+=("")
VALUES+=("")
VALUE_NAMES+=("")
ARGS+=("use_authtok")
NEW_ARGS+=("use_authtok")

for idx in "${!VALUES[@]}"
do
    if [ -e "/etc/pam.d/common-password" ] ; then
        valueRegex="${VALUES[$idx]}" defaultValue="${VALUES[$idx]}"
        # non-empty values need to be preceded by an equals sign
        [ -n "${valueRegex}" ] && valueRegex="=${valueRegex}"
        # add an equals sign to non-empty values
        [ -n "${defaultValue}" ] && defaultValue="=${defaultValue}"

        # fix the value for 'option' if one exists but does not match 'valueRegex'
        if grep -q -P "^\\s*password\\s+requisite\\s+pam_pwhistory.so(\\s.+)?\\s+${VALUE_NAMES[$idx]}(?"'!'"${valueRegex}(\\s|\$))" < "/etc/pam.d/common-password" ; then
            sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+requisite\\s+pam_pwhistory.so(\\s.+)?\\s)${VALUE_NAMES[$idx]}=[^[:space:]]*/\\1${VALUE_NAMES[$idx]}${defaultValue}/" "/etc/pam.d/common-password"

        # add 'option=default' if option is not set
        elif grep -q -E "^\\s*password\\s+requisite\\s+pam_pwhistory.so" < "/etc/pam.d/common-password" &&
                grep    -E "^\\s*password\\s+requisite\\s+pam_pwhistory.so" < "/etc/pam.d/common-password" | grep -q -E -v "\\s${VALUE_NAMES[$idx]}(=|\\s|\$)" ; then

            sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+requisite\\s+pam_pwhistory.so[^\\n]*)/\\1 ${VALUE_NAMES[$idx]}${defaultValue}/" "/etc/pam.d/common-password"
        # add a new entry if none exists
        elif ! grep -q -P "^\\s*password\\s+requisite\\s+pam_pwhistory.so(\\s.+)?\\s+${VALUE_NAMES[$idx]}${valueRegex}(\\s|\$)" < "/etc/pam.d/common-password" ; then
            echo "password requisite pam_pwhistory.so ${VALUE_NAMES[$idx]}${defaultValue}" >> "/etc/pam.d/common-password"
        fi
    else
        echo "/etc/pam.d/common-password doesn't exist" >&2
    fi
done

for idx in "${!ARGS[@]}"
do
    if ! grep -q -P "^\s*password\s+requisite\s+pam_pwhistory.so.*\s+${ARGS[$idx]}\s*$" /etc/pam.d/common-password ; then
        sed --follow-symlinks -i -E -e "s/^\\s*password\\s+requisite\\s+pam_pwhistory.so.*\$/& ${NEW_ARGS[$idx]}/" /etc/pam.d/common-password
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set Deny For Failed Password Attempts   [ref]

The Ubuntu 20.04 operating system must lock an account after - at most - 5 consecutive invalid access attempts.
Rationale:
By limiting the number of failed logon attempts, the risk of unauthorized system access via user password guessing, otherwise known as brute-force attacks, is reduced. Limits are imposed by locking the account. To configure the operating system to lock an account after three unsuccessful consecutive access attempts using pam_tally2.so, modify the content of both /etc/pam.d/common-auth and /etc/pam.d/common-account as follows:

  • add or modify the pam_tally2.so module line in /etc/pam.d/common-auth to ensure both onerr=fail and deny=5 are present. For example: 
    auth required pam_tally2.so onerr=fail silent audit deny=5
  • add or modify the following line in /etc/pam.d/common-account: 
    account required pam_tally2.so
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_passwords_pam_tally2
Identifiers and References

References:  CCI-000044, Req-8.1.6, 8.3.4, SRG-OS-000021-GPOS-00005, UBTU-20-010072, 5.3.2


Complexity:low
Disruption:low
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-UBTU-20-010072
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
- name: XCCDF Value var_password_pam_tally2 # promote to variable
  set_fact:
    var_password_pam_tally2: !!str 5
  tags:
    - always

- name: Set Deny For Failed Password Attempts - Check if expected PAM module line
    is present in /etc/pam.d/common-auth
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-auth
    regexp: ^\s*auth\s+required\s+pam_tally2.so\s*.*
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_line_present
  when: '"libpam-runtime" in ansible_facts.packages'
  tags:
  - DISA-STIG-UBTU-20-010072
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Include or update the PAM module line
    in /etc/pam.d/common-auth
  block:

  - name: Set Deny For Failed Password Attempts - Check if required PAM module line
      is present in /etc/pam.d/common-auth with different control
    ansible.builtin.lineinfile:
      path: /etc/pam.d/common-auth
      regexp: ^\s*auth\s+.*\s+pam_tally2.so\s*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_other_control_present

  - name: Set Deny For Failed Password Attempts - Ensure the correct control for the
      required PAM module line in /etc/pam.d/common-auth
    ansible.builtin.replace:
      dest: /etc/pam.d/common-auth
      regexp: ^(\s*auth\s+).*(\bpam_tally2.so.*)
      replace: \1required \2
    register: result_pam_module_edit
    when:
    - result_pam_line_other_control_present.found == 1

  - name: Set Deny For Failed Password Attempts - Ensure the required PAM module line
      is included in /etc/pam.d/common-auth
    ansible.builtin.lineinfile:
      dest: /etc/pam.d/common-auth
      line: auth    required    pam_tally2.so
    register: result_pam_module_add
    when:
    - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
      > 1

  - name: Set Deny For Failed Password Attempts - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present is defined
    - result_authselect_present.stat.exists
    - |-
      (result_pam_module_add is defined and result_pam_module_add.changed)
       or (result_pam_module_edit is defined and result_pam_module_edit.changed)
  when:
  - '"libpam-runtime" in ansible_facts.packages'
  - result_pam_line_present.found is defined
  - result_pam_line_present.found == 0
  tags:
  - DISA-STIG-UBTU-20-010072
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Check if the required PAM module option
    is present in /etc/pam.d/common-auth
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-auth
    regexp: ^\s*auth\s+required\s+pam_tally2.so\s*.*\sdeny\b
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_module_deny_option_present
  when: '"libpam-runtime" in ansible_facts.packages'
  tags:
  - DISA-STIG-UBTU-20-010072
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Ensure the "deny" PAM option for "pam_tally2.so"
    is included in /etc/pam.d/common-auth
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-auth
    backrefs: true
    regexp: ^(\s*auth\s+required\s+pam_tally2.so.*)
    line: \1 deny={{ var_password_pam_tally2 }}
    state: present
  register: result_pam_deny_add
  when:
  - '"libpam-runtime" in ansible_facts.packages'
  - result_pam_module_deny_option_present.found == 0
  tags:
  - DISA-STIG-UBTU-20-010072
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Ensure the required value for "deny"
    PAM option from "pam_tally2.so" in /etc/pam.d/common-auth
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-auth
    backrefs: true
    regexp: ^(\s*auth\s+required\s+pam_tally2.so\s+.*)(deny)=[0-9a-zA-Z]+\s*(.*)
    line: \1\2={{ var_password_pam_tally2 }} \3
  register: result_pam_deny_edit
  when:
  - '"libpam-runtime" in ansible_facts.packages'
  - result_pam_module_deny_option_present.found > 0
  tags:
  - DISA-STIG-UBTU-20-010072
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Check if expected PAM module line
    is present in /etc/pam.d/common-auth
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-auth
    regexp: ^\s*auth\s+required\s+pam_tally2.so\s*.*
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_line_present
  when: '"libpam-runtime" in ansible_facts.packages'
  tags:
  - DISA-STIG-UBTU-20-010072
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Include or update the PAM module line
    in /etc/pam.d/common-auth
  block:

  - name: Set Deny For Failed Password Attempts - Check if required PAM module line
      is present in /etc/pam.d/common-auth with different control
    ansible.builtin.lineinfile:
      path: /etc/pam.d/common-auth
      regexp: ^\s*auth\s+.*\s+pam_tally2.so\s*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_other_control_present

  - name: Set Deny For Failed Password Attempts - Ensure the correct control for the
      required PAM module line in /etc/pam.d/common-auth
    ansible.builtin.replace:
      dest: /etc/pam.d/common-auth
      regexp: ^(\s*auth\s+).*(\bpam_tally2.so.*)
      replace: \1required \2
    register: result_pam_module_edit
    when:
    - result_pam_line_other_control_present.found == 1

  - name: Set Deny For Failed Password Attempts - Ensure the required PAM module line
      is included in /etc/pam.d/common-auth
    ansible.builtin.lineinfile:
      dest: /etc/pam.d/common-auth
      insertafter: (fail)
      line: auth    required    pam_tally2.so
    register: result_pam_module_add
    when:
    - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
      > 1

  - name: Set Deny For Failed Password Attempts - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present is defined
    - result_authselect_present.stat.exists
    - |-
      (result_pam_module_add is defined and result_pam_module_add.changed)
       or (result_pam_module_edit is defined and result_pam_module_edit.changed)
  when:
  - '"libpam-runtime" in ansible_facts.packages'
  - result_pam_line_present.found is defined
  - result_pam_line_present.found == 0
  tags:
  - DISA-STIG-UBTU-20-010072
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Check if the required PAM module option
    is present in /etc/pam.d/common-auth
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-auth
    regexp: ^\s*auth\s+required\s+pam_tally2.so\s*.*\sonerr\b
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_module_onerr_option_present
  when: '"libpam-runtime" in ansible_facts.packages'
  tags:
  - DISA-STIG-UBTU-20-010072
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Ensure the "onerr" PAM option for
    "pam_tally2.so" is included in /etc/pam.d/common-auth
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-auth
    backrefs: true
    regexp: ^(\s*auth\s+required\s+pam_tally2.so.*)
    line: \1 onerr=fail
    state: present
  register: result_pam_onerr_add
  when:
  - '"libpam-runtime" in ansible_facts.packages'
  - result_pam_module_onerr_option_present.found == 0
  tags:
  - DISA-STIG-UBTU-20-010072
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Ensure the required value for "onerr"
    PAM option from "pam_tally2.so" in /etc/pam.d/common-auth
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-auth
    backrefs: true
    regexp: ^(\s*auth\s+required\s+pam_tally2.so\s+.*)(onerr)=[0-9a-zA-Z]+\s*(.*)
    line: \1\2=fail \3
  register: result_pam_onerr_edit
  when:
  - '"libpam-runtime" in ansible_facts.packages'
  - result_pam_module_onerr_option_present.found > 0
  tags:
  - DISA-STIG-UBTU-20-010072
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Check if expected PAM module line
    is present in /etc/pam.d/common-account
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-account
    regexp: ^\s*account\s+required\s+pam_tally2.so\s*.*
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_line_present
  when: '"libpam-runtime" in ansible_facts.packages'
  tags:
  - DISA-STIG-UBTU-20-010072
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Include or update the PAM module line
    in /etc/pam.d/common-account
  block:

  - name: Set Deny For Failed Password Attempts - Check if required PAM module line
      is present in /etc/pam.d/common-account with different control
    ansible.builtin.lineinfile:
      path: /etc/pam.d/common-account
      regexp: ^\s*account\s+.*\s+pam_tally2.so\s*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_other_control_present

  - name: Set Deny For Failed Password Attempts - Ensure the correct control for the
      required PAM module line in /etc/pam.d/common-account
    ansible.builtin.replace:
      dest: /etc/pam.d/common-account
      regexp: ^(\s*account\s+).*(\bpam_tally2.so.*)
      replace: \1required \2
    register: result_pam_module_edit
    when:
    - result_pam_line_other_control_present.found == 1

  - name: Set Deny For Failed Password Attempts - Ensure the required PAM module line
      is included in /etc/pam.d/common-account
    ansible.builtin.lineinfile:
      dest: /etc/pam.d/common-account
      line: account    required    pam_tally2.so
    register: result_pam_module_add
    when:
    - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
      > 1

  - name: Set Deny For Failed Password Attempts - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present is defined
    - result_authselect_present.stat.exists
    - |-
      (result_pam_module_add is defined and result_pam_module_add.changed)
       or (result_pam_module_edit is defined and result_pam_module_edit.changed)
  when:
  - '"libpam-runtime" in ansible_facts.packages'
  - result_pam_line_present.found is defined
  - result_pam_line_present.found == 0
  tags:
  - DISA-STIG-UBTU-20-010072
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Check if the required PAM module option
    is present in /etc/pam.d/common-account
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-account
    regexp: ^\s*account\s+required\s+pam_tally2.so\s*.*\s\b
    state: absent
  check_mode: true
  changed_when: false
  register: result_pam_module__option_present
  when: '"libpam-runtime" in ansible_facts.packages'
  tags:
  - DISA-STIG-UBTU-20-010072
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set Deny For Failed Password Attempts - Ensure the "" PAM option for "pam_tally2.so"
    is included in /etc/pam.d/common-account
  ansible.builtin.lineinfile:
    path: /etc/pam.d/common-account
    backrefs: true
    regexp: ^(\s*account\s+required\s+pam_tally2.so.*)
    line: \1
    state: present
  register: result_pam__add
  when:
  - '"libpam-runtime" in ansible_facts.packages'
  - result_pam_module__option_present.found == 0
  tags:
  - DISA-STIG-UBTU-20-010072
  - PCI-DSS-Req-8.1.6
  - PCI-DSSv4-8.3.4
  - accounts_passwords_pam_tally2
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed


# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'libpam-runtime' 2>/dev/null | grep -q installed; then

var_password_pam_tally2='5'

# Use a non-number regexp to force update of the value of the deny option
if ! grep -qP '^\s*auth\s+'"required"'\s+pam_tally2.so\s*.*' "/etc/pam.d/common-auth"; then
    # Line matching group + control + module was not found. Check group + module.
    if [ "$(grep -cP '^\s*auth\s+.*\s+pam_tally2.so\s*' "/etc/pam.d/common-auth")" -eq 1 ]; then
        # The control is updated only if one single line matches.
        sed -i -E --follow-symlinks 's/^(\s*auth\s+).*(\bpam_tally2.so.*)/\1'"required"' \2/' "/etc/pam.d/common-auth"
    else
        echo 'auth    '"required"'    pam_tally2.so' >> "/etc/pam.d/common-auth"
    fi
fi
# Check the option
if ! grep -qP '^\s*auth\s+'"required"'\s+pam_tally2.so\s*.*\sdeny\b' "/etc/pam.d/common-auth"; then
    sed -i -E --follow-symlinks '/\s*auth\s+'"required"'\s+pam_tally2.so.*/ s/$/ deny='"${var_password_pam_tally2}"'/' "/etc/pam.d/common-auth"
else
    sed -i -E --follow-symlinks 's/(\s*auth\s+'"required"'\s+pam_tally2.so\s+.*)('"deny"'=)[[:alnum:]]+\s*(.*)/\1\2'"${var_password_pam_tally2}"' \3/' "/etc/pam.d/common-auth"
fi
if ! grep -qP '^\s*auth\s+'"required"'\s+pam_tally2.so\s*.*' "/etc/pam.d/common-auth"; then
    # Line matching group + control + module was not found. Check group + module.
    if [ "$(grep -cP '^\s*auth\s+.*\s+pam_tally2.so\s*' "/etc/pam.d/common-auth")" -eq 1 ]; then
        # The control is updated only if one single line matches.
        sed -i -E --follow-symlinks 's/^(\s*auth\s+).*(\bpam_tally2.so.*)/\1'"required"' \2/' "/etc/pam.d/common-auth"
    else
        LAST_MATCH_LINE=$(grep -nP "(fail)" "/etc/pam.d/common-auth" | tail -n 1 | cut -d: -f 1)
        if [ ! -z $LAST_MATCH_LINE ]; then
            sed -i --follow-symlinks $LAST_MATCH_LINE' a auth     '"required"'    pam_tally2.so' "/etc/pam.d/common-auth"
        else
            echo 'auth    '"required"'    pam_tally2.so' >> "/etc/pam.d/common-auth"
        fi
    fi
fi
# Check the option
if ! grep -qP '^\s*auth\s+'"required"'\s+pam_tally2.so\s*.*\sonerr\b' "/etc/pam.d/common-auth"; then
    sed -i -E --follow-symlinks '/\s*auth\s+'"required"'\s+pam_tally2.so.*/ s/$/ onerr='"fail"'/' "/etc/pam.d/common-auth"
else
    sed -i -E --follow-symlinks 's/(\s*auth\s+'"required"'\s+pam_tally2.so\s+.*)('"onerr"'=)[[:alnum:]]+\s*(.*)/\1\2'"fail"' \3/' "/etc/pam.d/common-auth"
fi
if ! grep -qP '^\s*account\s+'"required"'\s+pam_tally2.so\s*.*' "/etc/pam.d/common-account"; then
    # Line matching group + control + module was not found. Check group + module.
    if [ "$(grep -cP '^\s*account\s+.*\s+pam_tally2.so\s*' "/etc/pam.d/common-account")" -eq 1 ]; then
        # The control is updated only if one single line matches.
        sed -i -E --follow-symlinks 's/^(\s*account\s+).*(\bpam_tally2.so.*)/\1'"required"' \2/' "/etc/pam.d/common-account"
    else
        echo 'account    '"required"'    pam_tally2.so' >> "/etc/pam.d/common-account"
    fi
fi
# Check the option
if ! grep -qP '^\s*account\s+'"required"'\s+pam_tally2.so\s*.*\s\b' "/etc/pam.d/common-account"; then
    sed -i -E --follow-symlinks '/\s*account\s+'"required"'\s+pam_tally2.so.*/ s/$/ /' "/etc/pam.d/common-account"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Set Password Quality Requirements   Group contains 1 group and 7 rules
[ref]   The default pam_pwquality PAM module provides strength checking for passwords. It performs a number of checks, such as making sure passwords are not similar to dictionary words, are of at least a certain length, are not the previous password reversed, and are not simply a change of case from the previous password. It can also require passwords to be in certain character classes. The pam_pwquality module is the preferred way of configuring password requirements.

The man pages pam_pwquality(8) provide information on the capabilities and configuration of each.
Group   Set Password Quality Requirements with pam_pwquality   Group contains 7 rules
[ref]   The pam_pwquality PAM module can be configured to meet requirements for a variety of policies.

For example, to configure pam_pwquality to require at least one uppercase character, lowercase character, digit, and other (special) character, make sure that pam_pwquality exists in /etc/pam.d/system-auth: 
password    requisite     pam_pwquality.so try_first_pass local_users_only retry=3 authtok_type=
If no such line exists, add one as the first line of the password section in /etc/pam.d/system-auth. Next, modify the settings in /etc/security/pwquality.conf to match the following: 
difok = 4
minlen = 14
dcredit = -1
ucredit = -1
lcredit = -1
ocredit = -1
maxrepeat = 3
The arguments can be modified to ensure compliance with your organization's security policy. Discussion of each parameter follows.

Rule   Ensure PAM Enforces Password Requirements - Minimum Digit Characters   [ref]

The pam_pwquality module's dcredit parameter controls requirements for usage of digits in a password. When set to a negative number, any password will be required to contain that many digits. When set to a positive number, pam_pwquality will grant +1 additional length credit for each digit. Modify the dcredit setting in /etc/security/pwquality.conf to require the use of a digit in passwords.
Rationale:
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised. Requiring digits makes password guessing attacks more difficult by ensuring a larger search space.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_dcredit
Identifiers and References

References:  BP28(R18), 1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000194, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, FMT_SMF_EXT.1, Req-8.2.3, 8.3.6, 8.3.9, SRG-OS-000071-GPOS-00039, UBTU-20-010052, 5.3.1


Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-UBTU-20-010052
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - accounts_password_pam_dcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_dcredit # promote to variable
  set_fact:
    var_password_pam_dcredit: !!str -1
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Digit Characters - Ensure
    PAM variable dcredit is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*dcredit
    line: dcredit = {{ var_password_pam_dcredit }}
  when: '"libpam-runtime" in ansible_facts.packages'
  tags:
  - DISA-STIG-UBTU-20-010052
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - accounts_password_pam_dcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'libpam-runtime' 2>/dev/null | grep -q installed; then

var_password_pam_dcredit='-1'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^dcredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_dcredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^dcredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^dcredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters   [ref]

The pam_pwquality module's lcredit parameter controls requirements for usage of lowercase letters in a password. When set to a negative number, any password will be required to contain that many lowercase characters. When set to a positive number, pam_pwquality will grant +1 additional length credit for each lowercase character. Modify the lcredit setting in /etc/security/pwquality.conf to require the use of a lowercase character in passwords.
Rationale:
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.
Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possble combinations that need to be tested before the password is compromised. Requiring a minimum number of lowercase characters makes password guessing attacks more difficult by ensuring a larger search space.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_lcredit
Identifiers and References

References:  BP28(R18), 1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000193, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, FMT_SMF_EXT.1, Req-8.2.3, 8.3.6, 8.3.9, SRG-OS-000070-GPOS-00038, UBTU-20-010051, 5.3.1


Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-UBTU-20-010051
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - accounts_password_pam_lcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_lcredit # promote to variable
  set_fact:
    var_password_pam_lcredit: !!str -1
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Lowercase Characters -
    Ensure PAM variable lcredit is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*lcredit
    line: lcredit = {{ var_password_pam_lcredit }}
  when: '"libpam-runtime" in ansible_facts.packages'
  tags:
  - DISA-STIG-UBTU-20-010051
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - accounts_password_pam_lcredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'libpam-runtime' 2>/dev/null | grep -q installed; then

var_password_pam_lcredit='-1'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^lcredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_lcredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^lcredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^lcredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure PAM Enforces Password Requirements - Minimum Different Categories   [ref]

The pam_pwquality module's minclass parameter controls requirements for usage of different character classes, or types, of character that must exist in a password before it is considered valid. For example, setting this value to three (3) requires that any password must have characters from at least three different categories in order to be approved. The default value is zero (0), meaning there are no required classes. There are four categories available: 
* Upper-case characters
* Lower-case characters
* Digits
* Special characters (for example, punctuation)
Modify the minclass setting in /etc/security/pwquality.conf entry to require 4 differing categories of characters when changing passwords.
Rationale:
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.

Requiring a minimum number of character categories makes password guessing attacks more difficult by ensuring a larger search space.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_minclass
Identifiers and References

References:  1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000195, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, SRG-OS-000072-GPOS-00040, 5.3.1


Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_minclass
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_minclass # promote to variable
  set_fact:
    var_password_pam_minclass: !!str 4
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Different Categories -
    Ensure PAM variable minclass is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*minclass
    line: minclass = {{ var_password_pam_minclass }}
  when: '"libpam-runtime" in ansible_facts.packages'
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_minclass
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'libpam-runtime' 2>/dev/null | grep -q installed; then

var_password_pam_minclass='4'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^minclass")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_minclass"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^minclass\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^minclass\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure PAM Enforces Password Requirements - Minimum Length   [ref]

The pam_pwquality module's minlen parameter controls requirements for minimum characters required in a password. Add minlen=14 after pam_pwquality to set minimum password length requirements.
Rationale:
The shorter the password, the lower the number of possible combinations that need to be tested before the password is compromised.
Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. Password length is one factor of several that helps to determine strength and how long it takes to crack a password. Use of more characters in a password helps to exponentially increase the time and/or resources required to compromise the password.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_minlen
Identifiers and References

References:  BP28(R18), 1, 12, 15, 16, 5, 5.6.2.1.1, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000205, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, FMT_SMF_EXT.1, Req-8.2.3, 8.3.6, 8.3.9, SRG-OS-000078-GPOS-00046, UBTU-20-010054, 5.3.1


Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.6.2.1.1
  - DISA-STIG-UBTU-20-010054
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - accounts_password_pam_minlen
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_minlen # promote to variable
  set_fact:
    var_password_pam_minlen: !!str 14
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Length - Ensure PAM variable
    minlen is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*minlen
    line: minlen = {{ var_password_pam_minlen }}
  when: '"libpam-runtime" in ansible_facts.packages'
  tags:
  - CJIS-5.6.2.1.1
  - DISA-STIG-UBTU-20-010054
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - accounts_password_pam_minlen
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'libpam-runtime' 2>/dev/null | grep -q installed; then

var_password_pam_minlen='14'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^minlen")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_minlen"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^minlen\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^minlen\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure PAM Enforces Password Requirements - Minimum Special Characters   [ref]

The pam_pwquality module's ocredit= parameter controls requirements for usage of special (or "other") characters in a password. When set to a negative number, any password will be required to contain that many special characters. When set to a positive number, pam_pwquality will grant +1 additional length credit for each special character. Modify the ocredit setting in /etc/security/pwquality.conf to equal -1 to require use of a special character in passwords.
Rationale:
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised. Requiring a minimum number of special characters makes password guessing attacks more difficult by ensuring a larger search space.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_ocredit
Identifiers and References

References:  BP28(R18), 1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-001619, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, FMT_SMF_EXT.1, SRG-OS-000266-GPOS-00101, UBTU-20-010055, 5.3.1


Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-UBTU-20-010055
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_ocredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_ocredit # promote to variable
  set_fact:
    var_password_pam_ocredit: !!str -1
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Special Characters - Ensure
    PAM variable ocredit is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*ocredit
    line: ocredit = {{ var_password_pam_ocredit }}
  when: '"libpam-runtime" in ansible_facts.packages'
  tags:
  - DISA-STIG-UBTU-20-010055
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - accounts_password_pam_ocredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'libpam-runtime' 2>/dev/null | grep -q installed; then

var_password_pam_ocredit='-1'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^ocredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_ocredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^ocredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^ocredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure PAM Enforces Password Requirements - Authentication Retry Prompts Permitted Per-Session   [ref]

To configure the number of retry prompts that are permitted per-session: Edit the pam_pwquality.so statement in /etc/pam.d/common-password to show retry=3, or a lower value if site policy is more restrictive. The DoD requirement is a maximum of 3 prompts per session.
Rationale:
Setting the password retry prompts that are permitted on a per-session basis to a low value requires some software, such as SSH, to re-connect. This can slow down and draw additional attention to some types of password-guessing attacks. Note that this is different from account lockout, which is provided by the pam_faillock module.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_retry
Identifiers and References

References:  1, 11, 12, 15, 16, 3, 5, 9, 5.5.3, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000192, CCI-000366, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, CM-6(a), AC-7(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, PR.IP-1, FMT_MOF_EXT.1, SRG-OS-000069-GPOS-00037, SRG-OS-000480-GPOS-00227, UBTU-20-010057, 5.3.1


# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'libpam-runtime' 2>/dev/null | grep -q installed; then

var_password_pam_retry='3'


if [ -e "/etc/pam.d/common-password" ] ; then
    valueRegex="$var_password_pam_retry" defaultValue="$var_password_pam_retry"
    # non-empty values need to be preceded by an equals sign
    [ -n "${valueRegex}" ] && valueRegex="=${valueRegex}"
    # add an equals sign to non-empty values
    [ -n "${defaultValue}" ] && defaultValue="=${defaultValue}"

    # fix 'type' if it's wrong
    if grep -q -P "^\\s*(?"'!'"password\\s)[[:alnum:]]+\\s+[[:alnum:]]+\\s+pam_pwquality.so" < "/etc/pam.d/common-password" ; then
        sed --follow-symlinks -i -E -e "s/^(\\s*)[[:alnum:]]+(\\s+[[:alnum:]]+\\s+pam_pwquality.so)/\\1password\\2/" "/etc/pam.d/common-password"
    fi

    # fix 'control' if it's wrong
    if grep -q -P "^\\s*password\\s+(?"'!'"requisite)[[:alnum:]]+\\s+pam_pwquality.so" < "/etc/pam.d/common-password" ; then
        sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+)[[:alnum:]]+(\\s+pam_pwquality.so)/\\1requisite\\2/" "/etc/pam.d/common-password"
    fi

    # fix the value for 'option' if one exists but does not match 'valueRegex'
    if grep -q -P "^\\s*password\\s+requisite\\s+pam_pwquality.so(\\s.+)?\\s+retry(?"'!'"${valueRegex}(\\s|\$))" < "/etc/pam.d/common-password" ; then
        sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+requisite\\s+pam_pwquality.so(\\s.+)?\\s)retry=[^[:space:]]*/\\1retry${defaultValue}/" "/etc/pam.d/common-password"

    # add 'option=default' if option is not set
    elif grep -q -E "^\\s*password\\s+requisite\\s+pam_pwquality.so" < "/etc/pam.d/common-password" &&
            grep    -E "^\\s*password\\s+requisite\\s+pam_pwquality.so" < "/etc/pam.d/common-password" | grep -q -E -v "\\sretry(=|\\s|\$)" ; then

        sed --follow-symlinks -i -E -e "s/^(\\s*password\\s+requisite\\s+pam_pwquality.so[^\\n]*)/\\1 retry${defaultValue}/" "/etc/pam.d/common-password"
    # add a new entry if none exists
    elif ! grep -q -P "^\\s*password\\s+requisite\\s+pam_pwquality.so(\\s.+)?\\s+retry${valueRegex}(\\s|\$)" < "/etc/pam.d/common-password" ; then
        echo "password requisite pam_pwquality.so retry${defaultValue}" >> "/etc/pam.d/common-password"
    fi
else
    echo "/etc/pam.d/common-password doesn't exist" >&2
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters   [ref]

The pam_pwquality module's ucredit= parameter controls requirements for usage of uppercase letters in a password. When set to a negative number, any password will be required to contain that many uppercase characters. When set to a positive number, pam_pwquality will grant +1 additional length credit for each uppercase character. Modify the ucredit setting in /etc/security/pwquality.conf to require the use of an uppercase character in passwords.
Rationale:
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks.

Password complexity is one factor of several that determines how long it takes to crack a password. The more complex the password, the greater the number of possible combinations that need to be tested before the password is compromised.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_pam_ucredit
Identifiers and References

References:  BP28(R18), 1, 12, 15, 16, 5, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000192, CCI-000193, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, IA-5(c), IA-5(1)(a), CM-6(a), IA-5(4), PR.AC-1, PR.AC-6, PR.AC-7, FMT_SMF_EXT.1, Req-8.2.3, 8.3.6, 8.3.9, SRG-OS-000069-GPOS-00037, SRG-OS-000070-GPOS-00038, UBTU-20-010050, 5.3.1


Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-UBTU-20-010050
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - accounts_password_pam_ucredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
- name: XCCDF Value var_password_pam_ucredit # promote to variable
  set_fact:
    var_password_pam_ucredit: !!str -1
  tags:
    - always

- name: Ensure PAM Enforces Password Requirements - Minimum Uppercase Characters -
    Ensure PAM variable ucredit is set accordingly
  ansible.builtin.lineinfile:
    create: true
    dest: /etc/security/pwquality.conf
    regexp: ^#?\s*ucredit
    line: ucredit = {{ var_password_pam_ucredit }}
  when: '"libpam-runtime" in ansible_facts.packages'
  tags:
  - DISA-STIG-UBTU-20-010050
  - NIST-800-53-CM-6(a)
  - NIST-800-53-IA-5(1)(a)
  - NIST-800-53-IA-5(4)
  - NIST-800-53-IA-5(c)
  - PCI-DSS-Req-8.2.3
  - PCI-DSSv4-8.3.6
  - PCI-DSSv4-8.3.9
  - accounts_password_pam_ucredit
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'libpam-runtime' 2>/dev/null | grep -q installed; then

var_password_pam_ucredit='-1'






# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^ucredit")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$var_password_pam_ucredit"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^ucredit\\>" "/etc/security/pwquality.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^ucredit\\>.*/$escaped_formatted_output/gi" "/etc/security/pwquality.conf"
else
    if [[ -s "/etc/security/pwquality.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/security/pwquality.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/security/pwquality.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/security/pwquality.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Install pam_pwquality Package   [ref]

The libpam-pwquality package can be installed with the following command: 
$ apt-get install libpam-pwquality
Rationale:
Use of a complex password helps to increase the time and resources required to compromise the password. Password complexity, or strength, is a measure of the effectiveness of a password in resisting attempts at guessing and brute-force attacks. "pwquality" enforces complex password construction configuration and has the ability to limit brute-force attacks on the system.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_pam_pwquality_installed
Identifiers and References

References:  CCI-000366, SRG-OS-000480-GPOS-00225, UBTU-20-010057, 5.3.1



[[packages]]
name = "libpam-pwquality"
version = "*"

Complexity:low
Disruption:low
Strategy:enable
include install_libpam-pwquality

class install_libpam-pwquality {
  package { 'libpam-pwquality':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Strategy:enable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-UBTU-20-010057
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_pam_pwquality_installed

- name: Ensure libpam-pwquality is installed
  package:
    name: libpam-pwquality
    state: present
  when: '"libpam-runtime" in ansible_facts.packages'
  tags:
  - DISA-STIG-UBTU-20-010057
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_pam_pwquality_installed

Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'libpam-runtime' 2>/dev/null | grep -q installed; then

DEBIAN_FRONTEND=noninteractive apt-get install -y "libpam-pwquality"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Protect Accounts by Restricting Password-Based Login   Group contains 4 groups and 23 rules
[ref]   Conventionally, Unix shell accounts are accessed by providing a username and password to a login program, which tests these values for correctness using the /etc/passwd and /etc/shadow files. Password-based login is vulnerable to guessing of weak passwords, and to sniffing and man-in-the-middle attacks against passwords entered over a network or at an insecure console. Therefore, mechanisms for accessing accounts by entering usernames and passwords should be restricted to those which are operationally necessary.
Group   Set Account Expiration Parameters   Group contains 3 rules

Rule   Ensure shadow Group is Empty   [ref]

The shadow group allows system programs which require access the ability to read the /etc/shadow file. No users should be assigned to the shadow group.
Warning:  This rule remediation will ensure the group membership is empty in /etc/group. To avoid any disruption the remediation won't change the primary group of users in /etc/passwd if any user has the shadow GID as primary group.
Rationale:
Any users assigned to the shadow group would be granted read access to the /etc/shadow file. If attackers can gain read access to the /etc/shadow file, they can easily run a password cracking program against the hashed passwords to break them. Other security information that is stored in the /etc/shadow file (such as expiration) could also be useful to subvert additional user accounts.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_ensure_shadow_group_empty
Identifiers and References

References:  Req-8.2.1, 8.3.2, 6.2.17



sed -ri 's/(^shadow:[^:]*:[^:]*:)([^:]+$)/\1/' /etc/group
Group   Set Password Expiration Parameters   Group contains 5 rules
[ref]   The file /etc/login.defs controls several password-related settings. Programs such as passwd, su, and login consult /etc/login.defs to determine behavior with regard to password aging, expiration warnings, and length. See the man page login.defs(5) for more information.

Users should be forced to change their passwords, in order to decrease the utility of compromised passwords. However, the need to change passwords often should be balanced against the risk that users will reuse or write down passwords if forced to change them too often. Forcing password changes every 90-360 days, depending on the environment, is recommended. Set the appropriate value as PASS_MAX_DAYS and apply it to existing accounts with the -M flag.

The PASS_MIN_DAYS (-m) setting prevents password changes for 7 days after the first change, to discourage password cycling. If you use this setting, train users to contact an administrator for an emergency password change in case a new password becomes compromised. The PASS_WARN_AGE (-W) setting gives users 7 days of warnings at login time that their passwords are about to expire.

For example, for each existing human user USER, expiration parameters could be adjusted to a 180 day maximum password age, 7 day minimum password age, and 7 day warning period with the following command: 
$ sudo chage -M 180 -m 7 -W 7 USER

Rule   Set Existing Passwords Maximum Age   [ref]

Configure non-compliant accounts to enforce a 365-day maximum password lifetime restriction by running the following command: 
$ sudo chage -M 365 USER
Rationale:
Any password, no matter how complex, can eventually be cracked. Therefore, passwords need to be changed periodically. If the operating system does not limit the lifetime of passwords and force users to change their passwords, there is the risk that the operating system passwords could be compromised.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_set_max_life_existing
Identifiers and References

References:  CCI-000199, IA-5(f), IA-5(1)(d), CM-6(a), SRG-OS-000076-GPOS-00044, 5.4.1.1


Complexity:low
Disruption:low
Strategy:restrict

var_accounts_maximum_age_login_defs='365'


while IFS= read -r i; do
    
    chage -M $var_accounts_maximum_age_login_defs $i

done <   <(awk -v var="$var_accounts_maximum_age_login_defs" -F: '(/^[^:]+:[^!*]/ && ($5 > var || $5 == "")) {print $1}' /etc/shadow)

Rule   Set Existing Passwords Minimum Age   [ref]

Configure non-compliant accounts to enforce a 24 hours/1 day minimum password lifetime by running the following command: 
$ sudo chage -m 1 USER
Rationale:
Enforcing a minimum password lifetime helps to prevent repeated password changes to defeat the password reuse or history enforcement requirement. If users are allowed to immediately and continually change their password, the password could be repeatedly changed in a short period of time to defeat the organization's policy regarding password reuse.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_set_min_life_existing
Identifiers and References

References:  CCI-000198, IA-5(f), IA-5(1)(d), CM-6(a), SRG-OS-000075-GPOS-00043, 5.4.1.2


Complexity:low
Disruption:low
Strategy:restrict

var_accounts_minimum_age_login_defs='1'


while IFS= read -r i; do
    
    chage -m $var_accounts_minimum_age_login_defs $i

done <   <(awk -v var="$var_accounts_minimum_age_login_defs" -F: '(/^[^:]+:[^!*]/ && ($4 < var || $4 == "")) {print $1}' /etc/shadow)
Group   Verify Proper Storage and Existence of Password Hashes   Group contains 6 rules
[ref]   By default, password hashes for local accounts are stored in the second field (colon-separated) in /etc/shadow. This file should be readable only by processes running with root credentials, preventing users from casually accessing others' password hashes and attempting to crack them. However, it remains possible to misconfigure the system and store password hashes in world-readable files such as /etc/passwd, or to even store passwords themselves in plaintext on the system. Using system-provided tools for password change/creation should allow administrators to avoid such misconfiguration.

Rule   Verify All Account Password Hashes are Shadowed with SHA512   [ref]

Verify the operating system requires the shadow password suite configuration be set to encrypt interactive user passwords using a strong cryptographic hash. Check that the interactive user account passwords are using a strong password hash with the following command: 
$ sudo cut -d: -f2 /etc/shadow
$6$kcOnRq/5$NUEYPuyL.wghQwWssXRcLRFiiru7f5JPV6GaJhNC2aK5F3PZpE/BCCtwrxRc/AInKMNX3CdMw11m9STiql12f/
Password hashes ! or * indicate inactive accounts not available for logon and are not evaluated. If any interactive user password hash does not begin with $6, this is a finding.
Rationale:
Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_all_shadowed_sha512
Identifiers and References

References:  CCI-000196, CCI-000803, IA-5(1)(c), IA-5(1).1(v), IA-7, IA-7.1, SRG-OS-000073-GPOS-00041, SRG-OS-000120-GPOS-00061, 5.3.4

Rule   Ensure all users last password change date is in the past   [ref]

All users should have a password change date in the past.
Warning:  Automatic remediation is not available, in order to avoid any system disruption.
Rationale:
If a user recorded password change date is in the future then they could bypass any set password expiration.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_password_last_change_is_in_past
Identifiers and References

References:  5.4.1.5

Rule   All GIDs referenced in /etc/passwd must be defined in /etc/group   [ref]

Add a group to the system for each GID referenced without a corresponding group.
Rationale:
If a user is assigned the Group Identifier (GID) of a group not existing on the system, and a group with the Group Identifier (GID) is subsequently created, the user may have unintended rights to any files associated with the group.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_gid_passwd_group_same
Identifiers and References

References:  1, 12, 15, 16, 5, 5.5.2, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, CCI-000764, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, A.18.1.4, A.7.1.1, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.2, A.9.4.3, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, IA-2, CM-6(a), PR.AC-1, PR.AC-6, PR.AC-7, Req-8.5.a, 8.2.2, SRG-OS-000104-GPOS-00051, 6.2.12

Rule   Prevent Login to Accounts With Empty Password   [ref]

If an account is configured for password authentication but does not have an assigned password, it may be possible to log into the account without authentication. Remove any instances of the nullok in /etc/pam.d/system-auth and /etc/pam.d/password-auth to prevent logins with empty passwords.
Warning:  If the system relies on authselect tool to manage PAM settings, the remediation will also use authselect tool. However, if any manual modification was made in PAM files, the authselect integrity check will fail and the remediation will be aborted in order to preserve intentional changes. In this case, an informative message will be shown in the remediation report. Note that this rule is not applicable for systems running within a container. Having user with empty password within a container is not considered a risk, because it should not be possible to directly login into a container anyway.
Rationale:
If an account has an empty password, anyone could log in and run commands with the privileges of that account. Accounts with empty passwords should never be used in operational environments.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_no_empty_passwords
Identifiers and References

References:  1, 12, 13, 14, 15, 16, 18, 3, 5, 5.5.2, APO01.06, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.02, DSS06.03, DSS06.10, 3.1.1, 3.1.5, CCI-000366, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.18.1.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, IA-5(1)(a), IA-5(c), CM-6(a), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.DS-5, FIA_UAU.1, Req-8.2.3, 8.3.6, 8.3.9, SRG-OS-000480-GPOS-00227, 6.2.1

Rule   Verify No .forward Files Exist   [ref]

The .forward file specifies an email address to forward the user's mail to.
Rationale:
Use of the .forward file poses a security risk in that sensitive data may be inadvertently transferred outside the organization. The .forward file also poses a risk as it can be used to execute commands that may perform unintended actions.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_no_forward_files
Identifiers and References

References:  6.2.8

Rule   Verify No netrc Files Exist   [ref]

The .netrc files contain login information used to auto-login into FTP servers and reside in the user's home directory. These files may contain unencrypted passwords to remote FTP servers making them susceptible to access by unauthorized users and should not be used. Any .netrc files should be removed.
Rationale:
Unencrypted passwords for remote FTP servers may be stored in .netrc files.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_no_netrc_files
Identifiers and References

References:  1, 11, 12, 14, 15, 16, 18, 3, 5, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10, CCI-000196, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-003-8 R1.3, CIP-003-8 R3, CIP-003-8 R3.1, CIP-003-8 R3.2, CIP-003-8 R3.3, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, IA-5(h), IA-5(1)(c), CM-6(a), IA-5(7), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.PT-3, 6.2.9

Group   Restrict Root Logins   Group contains 6 rules
[ref]   Direct root logins should be allowed only for emergency use. In normal situations, the administrator should access the system via a unique unprivileged account, and then use su or sudo to execute privileged commands. Discouraging administrators from accessing the root account directly ensures an audit trail in organizations with multiple administrators. Locking down the channels through which root can connect directly also reduces opportunities for password-guessing against the root account. The login program uses the file /etc/securetty to determine which interfaces should allow root logins. The virtual devices /dev/console and /dev/tty* represent the system consoles (accessible via the Ctrl-Alt-F1 through Ctrl-Alt-F6 keyboard sequences on a default installation). The default securetty file also contains /dev/vc/*. These are likely to be deprecated in most environments, but may be retained for compatibility. Root should also be prohibited from connecting via network protocols. Other sections of this document include guidance describing how to prevent root from logging in via SSH.

Rule   Verify Only Root Has UID 0   [ref]

If any account other than root has a UID of 0, this misconfiguration should be investigated and the accounts other than root should be removed or have their UID changed.
If the account is associated with system commands or applications the UID should be changed to one greater than "0" but less than "1000." Otherwise assign a UID greater than "1000" that has not already been assigned.
Rationale:
An account has root authority if it has a UID of 0. Multiple accounts with a UID of 0 afford more opportunity for potential intruders to guess a password for a privileged account. Proper configuration of sudo is recommended to afford multiple system administrators access to root privileges in an accountable manner.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_accounts_no_uid_except_zero
Identifiers and References

References:  1, 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.02, DSS06.03, DSS06.10, 3.1.1, 3.1.5, CCI-000366, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.18.1.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, IA-2, AC-6(5), IA-4(b), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.DS-5, Req-8.5, 8.2.2, 8.2.3, SRG-OS-000480-GPOS-00227, 6.2.2


awk -F: '$3 == 0 && $1 != "root" { print $1 }' /etc/passwd | xargs --no-run-if-empty --max-lines=1 passwd -l

Rule   Verify Root Has A Primary GID 0   [ref]

The root user should have a primary group of 0.
Rationale:
To help ensure that root-owned files are not inadvertently exposed to other users.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_accounts_root_gid_zero
Identifiers and References

References:  Req-8.1.1, 8.2.1, 5.4.3

Rule   Ensure the Group Used by pam_wheel Module Exists on System and is Empty   [ref]

Ensure that the group sugroup referenced by the pam_wheel group parameter exists and has no members. This ensures that no user can run commands with altered privileges through the su command.
Rationale:
The su program allows to run commands with a substitute user and group ID. It is commonly used to run commands as the root user. Limiting access to such command is considered a good security practice.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_ensure_pam_wheel_group_empty
Identifiers and References

References:  5.6



var_pam_wheel_group_for_su='sugroup'


if ! grep -q "^${var_pam_wheel_group_for_su}:[^:]*:[^:]*:[^:]*" /etc/group; then
    groupadd ${var_pam_wheel_group_for_su}
fi

# group must be empty
grp_memb=$(groupmems -g ${var_pam_wheel_group_for_su} -l)
if [ -n "${grp_memb}" ]; then
    for memb in ${grp_memb}; do
        deluser ${memb} ${var_pam_wheel_group_for_su}
    done
fi

Rule   Ensure Authentication Required for Single User Mode   [ref]

Single user mode is used for recovery when the system detects an issue during boot or by manual selection from the bootloader.
Rationale:
Requiring authentication in single user mode prevents an unauthorized user from rebooting the system into single user to gain root privileges without credentials.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_ensure_root_password_configured
Identifiers and References

References:  1.5.3

Rule   Ensure that System Accounts Do Not Run a Shell Upon Login   [ref]

Some accounts are not associated with a human user of the system, and exist to perform some administrative functions. Should an attacker be able to log into these accounts, they should not be granted access to a shell.

The login shell for each local account is stored in the last field of each line in /etc/passwd. System accounts are those user accounts with a user ID less than 1000. The user ID is stored in the third field. If any system account other than root has a login shell, disable it with the command: 
$ sudo usermod -s /sbin/nologin account
Warning:  Do not perform the steps in this section on the root account. Doing so might cause the system to become inaccessible.
Rationale:
Ensuring shells are not given to system accounts upon login makes it more difficult for attackers to make use of system accounts.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_no_shelllogin_for_systemaccounts
Identifiers and References

References:  1, 12, 13, 14, 15, 16, 18, 3, 5, 7, 8, DSS01.03, DSS03.05, DSS05.04, DSS05.05, DSS05.07, DSS06.03, CCI-000366, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 6.2, 1491, A.12.4.1, A.12.4.3, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, AC-6, CM-6(a), CM-6(b), CM-6.1(iv), DE.CM-1, DE.CM-3, PR.AC-1, PR.AC-4, PR.AC-6, 8.6.1, SRG-OS-000480-GPOS-00227, 5.4.2


Complexity:low
Disruption:medium
Strategy:restrict
- name: Ensure that System Accounts Do Not Run a Shell Upon Login - Get All Local
    Users From /etc/passwd
  ansible.builtin.getent:
    database: passwd
    split: ':'
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - PCI-DSSv4-8.6.1
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - no_shelllogin_for_systemaccounts
  - restrict_strategy

- name: Ensure that System Accounts Do Not Run a Shell Upon Login - Create local_users
    Variable From getent_passwd Facts
  ansible.builtin.set_fact:
    local_users: '{{ ansible_facts.getent_passwd | dict2items }}'
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - PCI-DSSv4-8.6.1
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - no_shelllogin_for_systemaccounts
  - restrict_strategy

- name: Ensure that System Accounts Do Not Run a Shell Upon Login -  Disable Login
    Shell for System Accounts
  ansible.builtin.user:
    name: '{{ item.key }}'
    shell: /sbin/nologin
  loop: '{{ local_users }}'
  when:
  - item.key not in ['root']
  - item.value[1]|int < 1000
  - item.value[5] not in ['/sbin/shutdown', '/sbin/halt', '/bin/sync']
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - PCI-DSSv4-8.6.1
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
  - no_shelllogin_for_systemaccounts
  - restrict_strategy

Complexity:low
Disruption:medium
Strategy:restrict

readarray -t systemaccounts < <(awk -F: '($3 < 1000 && $3 != root \
  && $7 != "\/sbin\/shutdown" && $7 != "\/sbin\/halt" && $7 != "\/bin\/sync") \
  { print $1 }' /etc/passwd)

for systemaccount in "${systemaccounts[@]}"; do
    usermod -s /sbin/nologin "$systemaccount"
done

Rule   Enforce Usage of pam_wheel with Group Parameter for su Authentication   [ref]

To ensure that only users who are members of the group set in the group pam_wheel parameter can run commands with altered privileges through the su command, make sure that the following line exists in the file /etc/pam.d/su: 
auth required pam_wheel.so use_uid group=sugroup
Rationale:
The su program allows to run commands with a substitute user and group ID. It is commonly used to run commands as the root user. Limiting access to such command is considered a good security practice.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_use_pam_wheel_group_for_su
Identifiers and References

References:  5.6


var_pam_wheel_group_for_su='sugroup'


PAM_CONF=/etc/pam.d/su

pamstr=$(grep -P '^auth\s+required\s+pam_wheel\.so\s+(?=[^#]*\buse_uid\b)(?=[^#]*\bgroup=)' ${PAM_CONF})
if [ -z "$pamstr" ]; then
    sed -Ei '/^auth\b.*\brequired\b.*\bpam_wheel\.so/d' ${PAM_CONF} # remove any remaining uncommented pam_wheel.so line
    sed -Ei "/^auth\s+sufficient\s+pam_rootok\.so.*$/a auth required pam_wheel.so use_uid group=${var_pam_wheel_group_for_su}" ${PAM_CONF}
else
    group_val=$(echo -n "$pamstr" | egrep -o '\bgroup=[_a-z][-0-9_a-z]*' | cut -d '=' -f 2)
    if [ -z "${group_val}" ] || [ ${group_val} != ${var_pam_wheel_group_for_su} ]; then
        sed -Ei "s/(^auth\s+required\s+pam_wheel.so\s+[^#]*group=)[_a-z][-0-9_a-z]*/\1${var_pam_wheel_group_for_su}/" ${PAM_CONF}
    fi
fi

Rule   Ensure All Groups on the System Have Unique Group ID   [ref]

Change the group name or delete groups, so each has a unique id.
Warning:  Automatic remediation of this control is not available due to the unique requirements of each system.
Rationale:
To assure accountability and prevent unauthenticated access, groups must be identified uniquely to prevent potential misuse and compromise of the system.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_group_unique_id
Identifiers and References

References:  CCI-000764, 8.2.1, SRG-OS-000104-GPOS-00051, 6.2.14

Rule   Ensure All Groups on the System Have Unique Group Names   [ref]

Change the group name or delete groups, so each has a unique name.
Warning:  Automatic remediation of this control is not available due to the unique requirements of each system.
Rationale:
To assure accountability and prevent unauthenticated access, groups must be identified uniquely to prevent potential misuse and compromise of the system.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_group_unique_name
Identifiers and References

References:  8.2.1, 6.2.16

Group   Secure Session Configuration Files for Login Accounts   Group contains 2 groups and 13 rules
[ref]   When a user logs into a Unix account, the system configures the user's session by reading a number of files. Many of these files are located in the user's home directory, and may have weak permissions as a result of user error or misconfiguration. If an attacker can modify or even read certain types of account configuration information, they can often gain full access to the affected user's account. Therefore, it is important to test and correct configuration file permissions for interactive accounts, particularly those of privileged users such as root or system administrators.
Group   Ensure that No Dangerous Directories Exist in Root's Path   Group contains 1 rule
[ref]   The active path of the root account can be obtained by starting a new root shell and running: 
# echo $PATH
This will produce a colon-separated list of directories in the path.

Certain path elements could be considered dangerous, as they could lead to root executing unknown or untrusted programs, which could contain malicious code. Since root may sometimes work inside untrusted directories, the . character, which represents the current directory, should never be in the root path, nor should any directory which can be written to by an unprivileged or semi-privileged (system) user.

It is a good practice for administrators to always execute privileged commands by typing the full path to the command.

Rule   Ensure that Root's Path Does Not Include World or Group-Writable Directories   [ref]

For each element in root's path, run: 
# ls -ld DIR
and ensure that write permissions are disabled for group and other.
Rationale:
Such entries increase the risk that root could execute code provided by unprivileged users, and potentially malicious code.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_root_path_dirs_no_write
Identifiers and References

References:  11, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, CCI-000366, 4.3.4.3.2, 4.3.4.3.3, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, CM-6(a), CM-6(a), PR.IP-1, 6.2.3

Group   Ensure that Users Have Sensible Umask Values   Group contains 5 rules
[ref]   The umask setting controls the default permissions for the creation of new files. With a default umask setting of 077, files and directories created by users will not be readable by any other user on the system. Users who wish to make specific files group- or world-readable can accomplish this by using the chmod command. Additionally, users can make all their files readable to their group by default by setting a umask of 027 in their shell configuration files. If default per-user groups exist (that is, if every user has a default group whose name is the same as that user's username and whose only member is the user), then it may even be safe for users to select a umask of 007, making it very easy to intentionally share files with groups of which the user is a member.

Rule   Ensure the Default Bash Umask is Set Correctly   [ref]

To ensure the default umask for users of the Bash shell is set properly, add or correct the umask setting in /etc/bashrc to read as follows: 
umask 027
Rationale:
The umask value influences the permissions assigned to files when they are created. A misconfigured umask value could result in files with excessive permissions that can be read or written to by unauthorized users.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_umask_etc_bashrc
Identifiers and References

References:  BP28(R35), 18, APO13.01, BAI03.01, BAI03.02, BAI03.03, CCI-000366, 4.3.4.3.3, A.14.1.1, A.14.2.1, A.14.2.5, A.6.1.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-6(1), CM-6(a), PR.IP-2, 8.6.1, SRG-OS-000480-GPOS-00228, SRG-OS-000480-GPOS-00227, 5.4.4


Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value var_accounts_user_umask # promote to variable
  set_fact:
    var_accounts_user_umask: !!str 027
  tags:
    - always

- name: Check if umask in /etc/bashrc is already set
  ansible.builtin.lineinfile:
    path: /etc/bashrc
    regexp: ^(\s*)umask\s+.*
    state: absent
  check_mode: true
  changed_when: false
  register: umask_replace
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-8.6.1
  - accounts_umask_etc_bashrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Replace user umask in /etc/bashrc
  ansible.builtin.replace:
    path: /etc/bashrc
    regexp: ^(\s*)umask(\s+).*
    replace: \g<1>umask\g<2>{{ var_accounts_user_umask }}
  when: umask_replace.found > 0
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-8.6.1
  - accounts_umask_etc_bashrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default umask is Appended Correctly
  ansible.builtin.lineinfile:
    create: true
    path: /etc/bashrc
    line: umask {{ var_accounts_user_umask }}
  when: umask_replace.found == 0
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-8.6.1
  - accounts_umask_etc_bashrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy



var_accounts_user_umask='027'






grep -q "^\s*umask" /etc/bash.bashrc && \
  sed -i -E -e "s/^(\s*umask).*/\1 $var_accounts_user_umask/g" /etc/bash.bashrc
if ! [ $? -eq 0 ]; then
    echo "umask $var_accounts_user_umask" >> /etc/bash.bashrc
fi

Rule   Ensure the Default C Shell Umask is Set Correctly   [ref]

To ensure the default umask for users of the C shell is set properly, add or correct the umask setting in /etc/csh.cshrc to read as follows: 
umask 027
Rationale:
The umask value influences the permissions assigned to files when they are created. A misconfigured umask value could result in files with excessive permissions that can be read or written to by unauthorized users.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_umask_etc_csh_cshrc
Identifiers and References

References:  18, APO13.01, BAI03.01, BAI03.02, BAI03.03, CCI-000366, 4.3.4.3.3, A.14.1.1, A.14.2.1, A.14.2.5, A.6.1.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-6(1), CM-6(a), PR.IP-2, SRG-OS-000480-GPOS-00228, SRG-OS-000480-GPOS-00227, 5.4.4


Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value var_accounts_user_umask # promote to variable
  set_fact:
    var_accounts_user_umask: !!str 027
  tags:
    - always

- name: Check if umask in /etc/csh.cshrc is already set
  ansible.builtin.lineinfile:
    path: /etc/csh.cshrc
    regexp: ^(\s*)umask\s+.*
    state: absent
  check_mode: true
  changed_when: false
  register: umask_replace
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_csh_cshrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Replace user umask in /etc/csh.cshrc
  ansible.builtin.replace:
    path: /etc/csh.cshrc
    regexp: ^(\s*)umask(\s+).*
    replace: \g<1>umask\g<2>{{ var_accounts_user_umask }}
  when: umask_replace.found > 0
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_csh_cshrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default umask is Appended Correctly
  ansible.builtin.lineinfile:
    create: true
    path: /etc/csh.cshrc
    line: umask {{ var_accounts_user_umask }}
  when: umask_replace.found == 0
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - accounts_umask_etc_csh_cshrc
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy



var_accounts_user_umask='027'


grep -q "^\s*umask" /etc/csh.cshrc && \
  sed -i -E -e "s/^(\s*umask).*/\1 $var_accounts_user_umask/g" /etc/csh.cshrc
if ! [ $? -eq 0 ]; then
    echo "umask $var_accounts_user_umask" >> /etc/csh.cshrc
fi

Rule   Ensure the Default Umask is Set Correctly in /etc/profile   [ref]

To ensure the default umask controlled by /etc/profile is set properly, add or correct the umask setting in /etc/profile to read as follows: 
umask 027
Note that /etc/profile also reads scrips within /etc/profile.d directory. These scripts are also valid files to set umask value. Therefore, they should also be considered during the check and properly remediated, if necessary.
Rationale:
The umask value influences the permissions assigned to files when they are created. A misconfigured umask value could result in files with excessive permissions that can be read or written to by unauthorized users.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_umask_etc_profile
Identifiers and References

References:  BP28(R35), 18, APO13.01, BAI03.01, BAI03.02, BAI03.03, CCI-000366, 4.3.4.3.3, A.14.1.1, A.14.2.1, A.14.2.5, A.6.1.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-6(1), CM-6(a), PR.IP-2, 8.6.1, SRG-OS-000480-GPOS-00228, SRG-OS-000480-GPOS-00227, 5.4.4


Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value var_accounts_user_umask # promote to variable
  set_fact:
    var_accounts_user_umask: !!str 027
  tags:
    - always

- name: Ensure the Default Umask is Set Correctly in /etc/profile - Locate Profile
    Configuration Files Where umask Is Defined
  ansible.builtin.find:
    paths:
    - /etc/profile.d
    patterns:
    - sh.local
    - '*.sh'
    contains: ^[\s]*umask\s+\d+
  register: result_profile_d_files
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-8.6.1
  - accounts_umask_etc_profile
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default Umask is Set Correctly in /etc/profile - Replace Existing
    umask Value in Files From /etc/profile.d
  ansible.builtin.replace:
    path: '{{ item.path }}'
    regexp: ^(\s*)umask\s+\d+
    replace: \1umask {{ var_accounts_user_umask }}
  loop: '{{ result_profile_d_files.files }}'
  register: result_umask_replaced_profile_d
  when: result_profile_d_files.matched
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-8.6.1
  - accounts_umask_etc_profile
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default Umask is Set Correctly in /etc/profile - Ensure umask Is
    Set in /etc/profile if Not Already Set Elsewhere
  ansible.builtin.lineinfile:
    create: true
    mode: 420
    path: /etc/profile
    line: umask {{ var_accounts_user_umask }}
  when: not result_profile_d_files.matched
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-8.6.1
  - accounts_umask_etc_profile
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure the Default Umask is Set Correctly in /etc/profile - Ensure umask Value
    For All Existing umask Definition in /etc/profile
  ansible.builtin.replace:
    path: /etc/profile
    regexp: ^(\s*)umask\s+\d+
    replace: \1umask {{ var_accounts_user_umask }}
  register: result_umask_replaced_profile
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-8.6.1
  - accounts_umask_etc_profile
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Strategy:restrict

var_accounts_user_umask='027'


readarray -t profile_files < <(find /etc/profile.d/ -type f -name '*.sh' -or -name 'sh.local')

for file in "${profile_files[@]}" /etc/profile; do
  grep -qE '^[^#]*umask' "$file" && sed -i "s/umask.*/umask $var_accounts_user_umask/g" "$file"
done

if ! grep -qrE '^[^#]*umask' /etc/profile*; then
  echo "umask $var_accounts_user_umask" >> /etc/profile
fi

Rule   Ensure the Default Umask is Set Correctly For Interactive Users   [ref]

Remove the UMASK environment variable from all interactive users initialization files.
Rationale:
The umask controls the default access mode assigned to newly created files. A umask of 077 limits new files to mode 700 or less permissive. Although umask can be represented as a four-digit number, the first digit representing special access modes is typically ignored or required to be 0. This requirement applies to the globally configured system defaults and the local interactive user defaults for each account on the system.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_umask_interactive_users
Identifiers and References

References:  CCI-000366, CCI-001814, SRG-OS-000480-GPOS-00227, SRG-OS-000480-GPOS-00228, 5.4.4


Complexity:low
Disruption:low
Strategy:restrict
- name: Ensure interactive local users are the owners of their respective initialization
    files
  ansible.builtin.shell:
    cmd: |-
      for dir in $(awk -F':' '{ if ($3 >= 1000 && $3 != 65534) print $6}' /etc/passwd); do
        for file in $(find $dir -maxdepth 1 -type f -name ".*"); do
          if [ "$(basename $file)" != ".bash_history" ]; then
            sed -i 's/^\([\s]*umask\s*\)/#\1/g' $file
          fi
        done
      done
  tags:
  - accounts_umask_interactive_users
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Strategy:restrict

while IFS= read -r dir; do
    while IFS= read -r -d '' file; do
        if [ "$(basename $file)" != ".bash_history" ]; then
            sed -i 's/^\([\s]*umask\s*\)/#\1/g' "$file"
        fi
    done <   <(find $dir -maxdepth 1 -type f -name ".*" -print0)
done <   <(awk -F':' '{ if ($3 >= 1000 && $3 != 65534) print $6}' /etc/passwd)

Rule   Set Interactive Session Timeout   [ref]

Setting the TMOUT option in /etc/profile ensures that all user sessions will terminate based on inactivity. The value of TMOUT should be exported and read only. The TMOUT setting in a file loaded by /etc/profile, e.g. /etc/profile.d/tmout.sh should read as follows: 
TMOUT=900
readonly TMOUT export TMOUT
Rationale:
Terminating an idle session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been left unattended.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_tmout
Identifiers and References

References:  BP28(R29), 1, 12, 15, 16, DSS05.04, DSS05.10, DSS06.10, 3.1.11, CCI-000057, CCI-001133, CCI-002361, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, CIP-004-6 R2.2.3, CIP-007-3 R5.1, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, AC-12, SC-10, AC-2(5), CM-6(a), PR.AC-7, FMT_MOF_EXT.1, 8.6.1, SRG-OS-000163-GPOS-00072, SRG-OS-000029-GPOS-00010, UBTU-20-010013, 5.4.5


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_accounts_tmout='900'


# if 0, no occurence of tmout found, if 1, occurence found
tmout_found=0

for f in /etc/bash.bashrc /etc/profile /etc/profile.d/*.sh; do
    if grep --silent '^\s*TMOUT' $f; then
        sed -i -E "s/^(\s*)TMOUT\s*=\s*(\w|\$)*(.*)$/\1TMOUT=$var_accounts_tmout\3/g" $f
        tmout_found=1
        if ! grep --silent '^\s*readonly TMOUT' $f ; then
            echo "readonly TMOUT" >> $f
        fi
        if ! grep --silent '^\s*export TMOUT' $f ; then
            echo "export TMOUT" >> $f
        fi
    fi
done

if [ $tmout_found -eq 0 ]; then
        echo -e "\n# Set TMOUT to $var_accounts_tmout per security requirements" >> /etc/profile.d/tmout.sh
        echo "TMOUT=$var_accounts_tmout" >> /etc/profile.d/tmout.sh
        echo "readonly TMOUT" >> /etc/profile.d/tmout.sh
        echo "export TMOUT" >> /etc/profile.d/tmout.sh
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   User Initialization Files Must Be Group-Owned By The Primary Group   [ref]

Change the group owner of interactive users files to the group found in 
/etc/passwd
for the user. To change the group owner of a local interactive user home directory, use the following command: 
$ sudo chgrp USER_GROUP /home/USER/.INIT_FILE
This rule ensures every initialization file related to an interactive user is group-owned by an interactive user.
Warning:  Due to OVAL limitation, this rule can report a false negative in a specific situation where two interactive users swap the group-ownership of their respective initialization files.
Rationale:
Local initialization files for interactive users are used to configure the user's shell environment upon logon. Malicious modification of these files could compromise accounts upon logon.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_user_dot_group_ownership
Identifiers and References

References:  CCI-000366, SRG-OS-000480-GPOS-00227, 6.2.7


Complexity:low
Disruption:low
Strategy:restrict
- name: Ensure interactive local users are the group-owners of their respective initialization
    files
  ansible.builtin.command:
    cmd: awk -F':' '{ if ($3 >= 1000 && $3 != 65534) system("chgrp -f " $4" "$6"/.[^\.]?*")
      }' /etc/passwd
  tags:
  - accounts_user_dot_group_ownership
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Strategy:restrict

awk -F':' '{ if ($3 >= 1000 && $3 != 65534) system("chgrp -f " $4" "$6"/.[^\.]?*") }' /etc/passwd

Rule   User Initialization Files Must Be Owned By the Primary User   [ref]

Set the owner of the user initialization files for interactive users to the primary owner with the following command: 
$ sudo chown USER /home/USER/.*
This rule ensures every initialization file related to an interactive user is owned by an interactive user.
Warning:  Due to OVAL limitation, this rule can report a false negative in a specific situation where two interactive users swap the ownership of their respective initialization files.
Rationale:
Local initialization files are used to configure the user's shell environment upon logon. Malicious modification of these files could compromise accounts upon logon.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_user_dot_user_ownership
Identifiers and References

References:  CCI-000366, SRG-OS-000480-GPOS-00227, 6.2.7


Complexity:low
Disruption:low
Strategy:restrict
- name: Ensure interactive local users are the owners of their respective initialization
    files
  ansible.builtin.command:
    cmd: awk -F':' '{ if ($3 >= 1000 && $3 != 65534) system("chown -f " $3" "$6"/.[^\.]?*")
      }' /etc/passwd
  tags:
  - accounts_user_dot_user_ownership
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Strategy:restrict

awk -F':' '{ if ($3 >= 1000 && $3 != 65534) system("chown -f " $3" "$6"/.[^\.]?*") }' /etc/passwd

Rule   All Interactive Users Home Directories Must Exist   [ref]

Create home directories to all interactive users that currently do not have a home directory assigned. Use the following commands to create the user home directory assigned in /etc/passwd: 
$ sudo mkdir /home/USER
Rationale:
If a local interactive user has a home directory defined that does not exist, the user may be given access to the / directory as the current working directory upon logon. This could create a Denial of Service because the user would not be able to access their logon configuration files, and it may give them visibility to system files they normally would not be able to access.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_accounts_user_interactive_home_directory_exists
Identifiers and References

References:  CCI-000366, SRG-OS-000480-GPOS-00227, 6.2.4


Complexity:low
Disruption:low
Strategy:restrict
- name: Get all local users from /etc/passwd
  ansible.builtin.getent:
    database: passwd
    split: ':'
  tags:
  - accounts_user_interactive_home_directory_exists
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Create local_users variable from the getent output
  ansible.builtin.set_fact:
    local_users: '{{ ansible_facts.getent_passwd|dict2items }}'
  tags:
  - accounts_user_interactive_home_directory_exists
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure interactive users have a home directory exists
  ansible.builtin.user:
    name: '{{ item.key }}'
    create_home: true
  loop: '{{ local_users }}'
  when:
  - item.value[2]|int >= 1000
  - item.value[2]|int != 65534
  tags:
  - accounts_user_interactive_home_directory_exists
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Strategy:restrict

for user in $(awk -F':' '{ if ($3 >= 1000 && $3 != 65534) print $1}' /etc/passwd); do
    mkhomedir_helper $user 0077;
done

Rule   All Interactive User Home Directories Must Be Group-Owned By The Primary Group   [ref]

Change the group owner of interactive users home directory to the group found in /etc/passwd. To change the group owner of interactive users home directory, use the following command: 
$ sudo chgrp USER_GROUP /home/USER
This rule ensures every home directory related to an interactive user is group-owned by an interactive user. It also ensures that interactive users are group-owners of one and only one home directory.
Warning:  Due to OVAL limitation, this rule can report a false negative in a specific situation where two interactive users swap the group-ownership of their respective home directories.
Rationale:
If the Group Identifier (GID) of a local interactive users home directory is not the same as the primary GID of the user, this would allow unauthorized access to the users files, and users that share the same group may not be able to access files that they legitimately should.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupownership_home_directories
Identifiers and References

References:  CCI-000366, SRG-OS-000480-GPOS-00227, 6.2.6


Complexity:low
Disruption:low
Strategy:restrict
- name: Get all local users from /etc/passwd
  ansible.builtin.getent:
    database: passwd
    split: ':'
  tags:
  - file_groupownership_home_directories
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Create local_users variable from the getent output
  ansible.builtin.set_fact:
    local_users: '{{ ansible_facts.getent_passwd|dict2items }}'
  tags:
  - file_groupownership_home_directories
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Test for existence of home directories to avoid creating them, but only fixing
    group ownership
  ansible.builtin.stat:
    path: '{{ item.value[4] }}'
  register: path_exists
  loop: '{{ local_users }}'
  when:
  - item.value[1]|int >= 1000
  - item.value[1]|int != 65534
  tags:
  - file_groupownership_home_directories
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure interactive local users are the group-owners of their respective home
    directories
  ansible.builtin.file:
    path: '{{ item.0.value[4] }}'
    group: '{{ item.0.value[2] }}'
  loop: '{{ local_users|zip(path_exists.results)|list }}'
  when: item.1.stat is defined and item.1.stat.exists
  tags:
  - file_groupownership_home_directories
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Strategy:restrict

awk -F':' '{ if ($3 >= 1000 && $3 != 65534) system("chgrp -f " $4" "$6) }' /etc/passwd

Rule   All Interactive User Home Directories Must Be Owned By The Primary User   [ref]

Change the owner of interactive users home directories to that correct owner. To change the owner of a interactive users home directory, use the following command: 
$ sudo chown USER /home/USER
This rule ensures every home directory related to an interactive user is owned by an interactive user. It also ensures that interactive users are owners of one and only one home directory.
Warning:  Due to OVAL limitation, this rule can report a false negative in a specific situation where two interactive users swap the ownership of their respective home directories.
Rationale:
If a local interactive user does not own their home directory, unauthorized users could access or modify the user's files, and the users may not be able to access their own files.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_ownership_home_directories
Identifiers and References

References:  CCI-000366, SRG-OS-000480-GPOS-00227, 6.2.6


Complexity:low
Disruption:low
Strategy:restrict
- name: Get all local users from /etc/passwd
  ansible.builtin.getent:
    database: passwd
    split: ':'
  tags:
  - file_ownership_home_directories
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Create local_users variable from the getent output
  ansible.builtin.set_fact:
    local_users: '{{ ansible_facts.getent_passwd|dict2items }}'
  tags:
  - file_ownership_home_directories
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Test for existence of home directories to avoid creating them, but only fixing
    ownership
  ansible.builtin.stat:
    path: '{{ item.value[4] }}'
  register: path_exists
  loop: '{{ local_users }}'
  when:
  - item.value[1]|int >= 1000
  - item.value[1]|int != 65534
  tags:
  - file_ownership_home_directories
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure interactive local users are the owners of their respective home directories
  ansible.builtin.file:
    path: '{{ item.0.value[4] }}'
    owner: '{{ item.0.value[1] }}'
  loop: '{{ local_users|zip(path_exists.results)|list }}'
  when: item.1.stat is defined and item.1.stat.exists
  tags:
  - file_ownership_home_directories
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Strategy:restrict

awk -F':' '{ if ($3 >= 1000 && $3 != 65534) system("chown -f " $3" "$6) }' /etc/passwd

Rule   All Interactive User Home Directories Must Have mode 0750 Or Less Permissive   [ref]

Change the mode of interactive users home directories to 0750. To change the mode of interactive users home directory, use the following command: 
$ sudo chmod 0750 /home/USER
Rationale:
Excessive permissions on local interactive user home directories may allow unauthorized access to user files by other users.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_home_directories
Identifiers and References

References:  CCI-000366, SRG-OS-000480-GPOS-00227, 6.2.5


Complexity:low
Disruption:low
Strategy:restrict
- name: Get all local users from /etc/passwd
  ansible.builtin.getent:
    database: passwd
    split: ':'
  tags:
  - file_permissions_home_directories
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Create local_users variable from the getent output
  ansible.builtin.set_fact:
    local_users: '{{ ansible_facts.getent_passwd|dict2items }}'
  tags:
  - file_permissions_home_directories
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Test for existence home directories to avoid creating them.
  ansible.builtin.stat:
    path: '{{ item.value[4] }}'
  register: path_exists
  loop: '{{ local_users }}'
  when:
  - item.value[1]|int >= 1000
  - item.value[1]|int != 65534
  tags:
  - file_permissions_home_directories
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Ensure interactive local users have proper permissions on their respective
    home directories
  ansible.builtin.file:
    path: '{{ item.0.value[4] }}'
    mode: u-s,g-w-s,o=-
    follow: false
    recurse: false
  loop: '{{ local_users|zip(path_exists.results)|list }}'
  when: item.1.stat is defined and item.1.stat.exists
  tags:
  - file_permissions_home_directories
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Strategy:restrict

for home_dir in $(awk -F':' '{ if ($3 >= 1000 && $3 != 65534) print $6 }' /etc/passwd); do
    # Only update the permissions when necessary. This will avoid changing the inode timestamp when
    # the permission is already defined as expected, therefore not impacting in possible integrity
    # check systems that also check inodes timestamps.
    find "$home_dir" -maxdepth 0 -perm /7027 -exec chmod u-s,g-w-s,o=- {} \;
done
Group   AppArmor   Group contains 3 rules
[ref]   Many security vulnerabilities result from bugs in trusted programs. A trusted program runs with privileges that attackers want to possess. The program fails to keep that trust if there is a bug in the program that allows the attacker to acquire said privilege.

AppArmor® is an application security solution designed specifically to apply privilege confinement to suspect programs. AppArmor allows the administrator to specify the domain of activities the program can perform by developing a security profile. A security profile is a listing of files that the program may access and the operations the program may perform. AppArmor secures applications by enforcing good application behavior without relying on attack signatures, so it can prevent attacks even if previously unknown vulnerabilities are being exploited.

Rule   Ensure AppArmor is installed   [ref]

AppArmor provide Mandatory Access Controls.
Rationale:
Without a Mandatory Access Control system installed only the default Discretionary Access Control system will be available.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_apparmor_installed
Identifiers and References

References:  CCI-001764, CCI-001774, CCI-002165, CCI-002235, SRG-OS-000368-GPOS-00154, SRG-OS-000312-GPOS-00122, SRG-OS-000312-GPOS-00123, SRG-OS-000312-GPOS-00124, SRG-OS-000324-GPOS-00125, SRG-OS-000370-GPOS-00155, UBTU-20-010439, 1.7.1.1



[[packages]]
name = "apparmor"
version = "*"

Complexity:low
Disruption:low
Strategy:enable
include install_apparmor

class install_apparmor {
  package { 'apparmor':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure apparmor is installed
  package:
    name: apparmor
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - DISA-STIG-UBTU-20-010439
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_apparmor_installed

Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

DEBIAN_FRONTEND=noninteractive apt-get install -y "apparmor"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   All AppArmor Profiles are in enforce or complain mode   [ref]

AppArmor profiles define what resources applications are able to access. To set all profiles to either enforce or complain mode run the following command to set all profiles to enforce mode: 
$ sudo aa-enforce /etc/apparmor.d/*
run the following command to set all profiles to complain mode: 
$ sudo aa-complain /etc/apparmor.d/*
To list unconfined processes run the following command: 
$ sudo apparmor_status | grep processes
Any unconfined processes may need to have a profile created or activated for them and then be restarted.
Rationale:
Security configuration requirements vary from site to site. Some sites may mandate a policy that is stricter than the default policy, which is perfectly acceptable. This recommendation is intended to ensure that any policies that exist on the system are activated.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_all_apparmor_profiles_in_enforce_complain_mode
Identifiers and References

References:  1.7.1.3


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_apparmor_mode='complain'


# make sure apparmor-utils is installed for aa-complain and aa-enforce
DEBIAN_FRONTEND=noninteractive apt-get install -y "apparmor-utils"

# Reload all AppArmor profiles
apparmor_parser -q -r /etc/apparmor.d/

# Set the mode
APPARMOR_MODE="$var_apparmor_mode"

if [ "$APPARMOR_MODE" = "enforce" ]
then
  # Set all profiles to enforce mode
  aa-enforce /etc/apparmor.d/*
fi

if [ "$APPARMOR_MODE" = "complain" ]
then
  # Set all profiles to complain mode
  aa-complain /etc/apparmor.d/*
fi


UNCONFINED=$(aa-status | grep "processes are unconfined" | awk '{print $1;}')
if [ $UNCONFINED -ne 0 ];

then
  echo -e "***WARNING***: There are some unconfined processes:"
  echo -e "----------------------------"
  echo "The may need to have a profile created or activated for them and then be restarted."
  for PROCESS in "${UNCONFINED[@]}"
  do
      echo "$PROCESS"
  done
  echo -e "----------------------------"
  echo "The may need to have a profile created or activated for them and then be restarted."
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure AppArmor is enabled in the bootloader configuration   [ref]

Configure AppArmor to be enabled at boot time and verify that it has not been overwritten by the bootloader boot parameters. Note: This recommendation is designed around the grub bootloader, if LILO or another bootloader is in use in your environment, enact equivalent settings.
Rationale:
AppArmor must be enabled at boot time in your bootloader configuration to ensure that the controls it provides are not overridden.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_grub2_enable_apparmor
Identifiers and References

References:  1.7.1.2


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Correct the form of default kernel command line in GRUB
if grep -q '^GRUB_CMDLINE_LINUX=.*apparmor=.*"'  '/etc/default/grub' ; then
       # modify the GRUB command-line if an apparmor= arg already exists
       sed -i "s/\(^GRUB_CMDLINE_LINUX=\".*\)apparmor=[^[:space:]]\+\(.*\"\)/\1apparmor=1\2/"  '/etc/default/grub'
else
       # no apparmor=arg is present, append it
       sed -i "s/\(^GRUB_CMDLINE_LINUX=\".*\)\"/\1 apparmor=1\"/"  '/etc/default/grub'
fi
# Correct the form of default kernel command line in GRUB
if grep -q '^GRUB_CMDLINE_LINUX=.*security=.*"'  '/etc/default/grub' ; then
       # modify the GRUB command-line if an security= arg already exists
       sed -i "s/\(^GRUB_CMDLINE_LINUX=\".*\)security=[^[:space:]]\+\(.*\"\)/\1security=apparmor\2/"  '/etc/default/grub'
else
       # no security=arg is present, append it
       sed -i "s/\(^GRUB_CMDLINE_LINUX=\".*\)\"/\1 security=apparmor\"/"  '/etc/default/grub'
fi


update-grub

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   GRUB2 bootloader configuration   Group contains 2 groups and 4 rules
[ref]   During the boot process, the boot loader is responsible for starting the execution of the kernel and passing options to it. The boot loader allows for the selection of different kernels - possibly on different partitions or media. The default Ubuntu 20.04 boot loader for x86 systems is called GRUB2. Options it can pass to the kernel include single-user mode, which provides root access without any authentication, and the ability to disable SELinux. To prevent local users from modifying the boot parameters and endangering security, protect the boot loader configuration with a password and ensure its configuration file's permissions are set properly.
Group   Non-UEFI GRUB2 bootloader configuration   Group contains 3 rules
[ref]   Non-UEFI GRUB2 bootloader configuration

Rule   Verify /boot/grub/grub.cfg User Ownership   [ref]

The file /boot/grub/grub.cfg should be owned by the root user to prevent destruction or modification of the file. To properly set the owner of /boot/grub/grub.cfg, run the command: 
$ sudo chown root /boot/grub/grub.cfg
Rationale:
Only root should be able to modify important boot parameters.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_grub2_cfg
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, 3.4.5, CCI-000225, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-7.1, 2.2.6, 1.5.2


Complexity:low
Disruption:low
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.5.2.2
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-7.1
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Test for existence /boot/grub/grub.cfg
  stat:
    path: /boot/grub/grub.cfg
  register: file_exists
  when:
  - '"/boot/efi" not in ansible_mounts | map(attribute="mount") | list'
  - '"grub2-common" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.5.2.2
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-7.1
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /boot/grub/grub.cfg
  file:
    path: /boot/grub/grub.cfg
    owner: '0'
  when:
  - '"/boot/efi" not in ansible_mounts | map(attribute="mount") | list'
  - '"grub2-common" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CJIS-5.5.2.2
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-7.1
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -d /sys/firmware/efi ] && dpkg-query --show --showformat='${db:Status-Status}\n' 'grub2-common' 2>/dev/null | grep -q installed && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

chown 0 /boot/grub/grub.cfg

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify /boot/grub/grub.cfg Permissions   [ref]

File permissions for /boot/grub/grub.cfg should be set to 600. To properly set the permissions of /boot/grub/grub.cfg, run the command: 
$ sudo chmod 600 /boot/grub/grub.cfg
Rationale:
Proper permissions ensure that only the root user can modify important boot parameters.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_grub2_cfg
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 3.4.5, CCI-000225, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, 1.5.2


Complexity:low
Disruption:low
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Test for existence /boot/grub/grub.cfg
  stat:
    path: /boot/grub/grub.cfg
  register: file_exists
  when:
  - '"/boot/efi" not in ansible_mounts | map(attribute="mount") | list'
  - '"grub2-common" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xwrs,o-xwrt on /boot/grub/grub.cfg
  file:
    path: /boot/grub/grub.cfg
    mode: u-xs,g-xwrs,o-xwrt
  when:
  - '"/boot/efi" not in ansible_mounts | map(attribute="mount") | list'
  - '"grub2-common" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-171-3.4.5
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_grub2_cfg
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -d /sys/firmware/efi ] && dpkg-query --show --showformat='${db:Status-Status}\n' 'grub2-common' 2>/dev/null | grep -q installed && { [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; }; then

chmod u-xs,g-xwrs,o-xwrt /boot/grub/grub.cfg

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set Boot Loader Password in grub2   [ref]

The grub2 boot loader should have a superuser account and password protection enabled to protect boot-time settings.

Since plaintext passwords are a security risk, generate a hash for the password by running the following command: 
# grub2-mkpasswd-pbkdf2
When prompted, enter the password that was selected.

Using the hash from the output, modify the /etc/grub.d/40_custom file with the following content: 
set superusers="boot"
password_pbkdf2 boot grub.pbkdf2.sha512.VeryLongString
NOTE: the bootloader superuser account and password MUST differ from the root account and password. Once the superuser password has been added, update the grub.cfg file by running: 
update-grub
Warning:  To prevent hard-coded passwords, automatic remediation of this control is not available. Remediation must be automated as a component of machine provisioning, or followed manually as outlined above. Also, do NOT manually add the superuser account and password to the grub.cfg file as the grub2-mkconfig command overwrites this file.
Rationale:
Password protection on the boot loader configuration ensures users with physical access cannot trivially alter important bootloader settings. These include which kernel to use, and whether to enter single-user mode.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_grub2_password
Identifiers and References

References:  BP28(R17), 1, 11, 12, 14, 15, 16, 18, 3, 5, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10, 3.4.5, CCI-000213, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, A.18.1.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CM-6(a), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.PT-3, FIA_UAU.1, SRG-OS-000080-GPOS-00048, UBTU-20-010009, 1.5.1

Group   UEFI GRUB2 bootloader configuration   Group contains 1 rule
[ref]   UEFI GRUB2 bootloader configuration

Rule   Set the UEFI Boot Loader Password   [ref]

The grub2 boot loader should have a superuser account and password protection enabled to protect boot-time settings.

Since plaintext passwords are a security risk, generate a hash for the password by running the following command: 
# grub2-mkpasswd-pbkdf2
When prompted, enter the password that was selected.

Using the hash from the output, modify the /etc/grub.d/40_custom file with the following content: 
set superusers="boot"
password_pbkdf2 boot grub.pbkdf2.sha512.VeryLongString
NOTE: the bootloader superuser account and password MUST differ from the root account and password. Once the superuser password has been added, update the grub.cfg file by running: 
update-grub
Warning:  To prevent hard-coded passwords, automatic remediation of this control is not available. Remediation must be automated as a component of machine provisioning, or followed manually as outlined above. Also, do NOT manually add the superuser account and password to the grub.cfg file as the grub2-mkconfig command overwrites this file.
Rationale:
Password protection on the boot loader configuration ensures users with physical access cannot trivially alter important bootloader settings. These include which kernel to use, and whether to enter single-user mode.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_grub2_uefi_password
Identifiers and References

References:  BP28(R17), 11, 12, 14, 15, 16, 18, 3, 5, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.03, DSS06.06, 3.4.5, CCI-000213, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), PR.AC-4, PR.AC-6, PR.PT-3, FIA_UAU.1, SRG-OS-000080-GPOS-00048, UBTU-20-010009, 1.5.1

Group   Configure Syslog   Group contains 2 groups and 7 rules
[ref]   The syslog service has been the default Unix logging mechanism for many years. It has a number of downsides, including inconsistent log format, lack of authentication for received messages, and lack of authentication, encryption, or reliable transport for messages sent over a network. However, due to its long history, syslog is a de facto standard which is supported by almost all Unix applications.

In Ubuntu 20.04, rsyslog has replaced ksyslogd as the syslog daemon of choice, and it includes some additional security features such as reliable, connection-oriented (i.e. TCP) transmission of logs, the option to log to database formats, and the encryption of log data en route to a central logging server. This section discusses how to configure rsyslog for best effect, and how to use tools provided with the system to maintain and monitor logs.
Group   systemd-journald   Group contains 3 rules
[ref]   systemd-journald is a system service that collects and stores logging data. It creates and maintains structured, indexed journals based on logging information that is received from a variety of sources. For more information on systemd-journald and additional systemd-journald configuration options, see https://systemd.io/.

Rule   Ensure journald is configured to compress large log files   [ref]

The journald system can compress large log files to avoid fill the system disk.
Rationale:
Log files that are not properly compressed run the risk of growing so large that they fill up the log partition. Valuable logging information could be lost if the log partition becomes full.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_journald_compress
Identifiers and References

References:  4.2.2.2


Complexity:low
Disruption:low
Strategy:restrict
- name: Setting shell-quoted shell-style assignment of 'Compress' to 'yes' in '/etc/systemd/journald.conf'
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/systemd/journald.conf
      create: false
      regexp: ^\s*Compress=
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/systemd/journald.conf
    lineinfile:
      path: /etc/systemd/journald.conf
      create: false
      regexp: ^\s*Compress=
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/systemd/journald.conf
    lineinfile:
      path: /etc/systemd/journald.conf
      create: true
      regexp: ^\s*Compress=
      line: Compress="yes"
      state: present
      insertbefore: ^# Compress
      validate: /usr/bin/bash -n %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - journald_compress
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/systemd/journald.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*Compress\s*=\s*/d" "/etc/systemd/journald.conf"
else
    touch "/etc/systemd/journald.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/systemd/journald.conf"

cp "/etc/systemd/journald.conf" "/etc/systemd/journald.conf.bak"
# Insert before the line matching the regex '^#\s*Compress'.
line_number="$(LC_ALL=C grep -n "^#\s*Compress" "/etc/systemd/journald.conf.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^#\s*Compress', insert at
    # the end of the file.
    printf '%s\n' "Compress='yes'" >> "/etc/systemd/journald.conf"
else
    head -n "$(( line_number - 1 ))" "/etc/systemd/journald.conf.bak" > "/etc/systemd/journald.conf"
    printf '%s\n' "Compress='yes'" >> "/etc/systemd/journald.conf"
    tail -n "+$(( line_number ))" "/etc/systemd/journald.conf.bak" >> "/etc/systemd/journald.conf"
fi
# Clean up after ourselves.
rm "/etc/systemd/journald.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure journald is configured to send logs to rsyslog   [ref]

Data from journald may be stored in volatile memory or persisted locally. Utilities exist to accept remote export of journald logs.
Rationale:
Storing log data on a remote host protects log integrity from local attacks. If an attacker gains root access on the local system, they could tamper with or remove log data that is stored on the local system.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_journald_forward_to_syslog
Identifiers and References

References:  4.2.2.1


Complexity:low
Disruption:low
Strategy:restrict
- name: Setting shell-quoted shell-style assignment of 'ForwardToSyslog' to 'yes'
    in '/etc/systemd/journald.conf'
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/systemd/journald.conf
      create: false
      regexp: ^\s*ForwardToSyslog=
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/systemd/journald.conf
    lineinfile:
      path: /etc/systemd/journald.conf
      create: false
      regexp: ^\s*ForwardToSyslog=
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/systemd/journald.conf
    lineinfile:
      path: /etc/systemd/journald.conf
      create: true
      regexp: ^\s*ForwardToSyslog=
      line: ForwardToSyslog="yes"
      state: present
      insertbefore: ^# ForwardToSyslog
      validate: /usr/bin/bash -n %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - journald_forward_to_syslog
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/systemd/journald.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*ForwardToSyslog\s*=\s*/d" "/etc/systemd/journald.conf"
else
    touch "/etc/systemd/journald.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/systemd/journald.conf"

cp "/etc/systemd/journald.conf" "/etc/systemd/journald.conf.bak"
# Insert before the line matching the regex '^#\s*ForwardToSyslog'.
line_number="$(LC_ALL=C grep -n "^#\s*ForwardToSyslog" "/etc/systemd/journald.conf.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^#\s*ForwardToSyslog', insert at
    # the end of the file.
    printf '%s\n' "ForwardToSyslog='yes'" >> "/etc/systemd/journald.conf"
else
    head -n "$(( line_number - 1 ))" "/etc/systemd/journald.conf.bak" > "/etc/systemd/journald.conf"
    printf '%s\n' "ForwardToSyslog='yes'" >> "/etc/systemd/journald.conf"
    tail -n "+$(( line_number ))" "/etc/systemd/journald.conf.bak" >> "/etc/systemd/journald.conf"
fi
# Clean up after ourselves.
rm "/etc/systemd/journald.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure journald is configured to write log files to persistent disk   [ref]

The journald system may store log files in volatile memory or locally on disk. If the logs are only stored in volatile memory they will we lost upon reboot.
Rationale:
Log files contain valuable data and need to be persistent to aid in possible investigations.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_journald_storage
Identifiers and References

References:  4.2.2.3


Complexity:low
Disruption:low
Strategy:restrict
- name: Setting shell-quoted shell-style assignment of 'Storage' to 'persistent' in
    '/etc/systemd/journald.conf'
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/systemd/journald.conf
      create: false
      regexp: ^\s*Storage=
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/systemd/journald.conf
    lineinfile:
      path: /etc/systemd/journald.conf
      create: false
      regexp: ^\s*Storage=
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/systemd/journald.conf
    lineinfile:
      path: /etc/systemd/journald.conf
      create: true
      regexp: ^\s*Storage=
      line: Storage="persistent"
      state: present
      insertbefore: ^# Storage
      validate: /usr/bin/bash -n %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - journald_storage
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/systemd/journald.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*Storage\s*=\s*/d" "/etc/systemd/journald.conf"
else
    touch "/etc/systemd/journald.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/systemd/journald.conf"

cp "/etc/systemd/journald.conf" "/etc/systemd/journald.conf.bak"
# Insert before the line matching the regex '^#\s*Storage'.
line_number="$(LC_ALL=C grep -n "^#\s*Storage" "/etc/systemd/journald.conf.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^#\s*Storage', insert at
    # the end of the file.
    printf '%s\n' "Storage='persistent'" >> "/etc/systemd/journald.conf"
else
    head -n "$(( line_number - 1 ))" "/etc/systemd/journald.conf.bak" > "/etc/systemd/journald.conf"
    printf '%s\n' "Storage='persistent'" >> "/etc/systemd/journald.conf"
    tail -n "+$(( line_number ))" "/etc/systemd/journald.conf.bak" >> "/etc/systemd/journald.conf"
fi
# Clean up after ourselves.
rm "/etc/systemd/journald.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Rsyslog Logs Sent To Remote Host   Group contains 1 rule
[ref]   If system logs are to be useful in detecting malicious activities, it is necessary to send logs to a remote server. An intruder who has compromised the root account on a system may delete the log entries which indicate that the system was attacked before they are seen by an administrator.

However, it is recommended that logs be stored on the local host in addition to being sent to the loghost, especially if rsyslog has been configured to use the UDP protocol to send messages over a network. UDP does not guarantee reliable delivery, and moderately busy sites will lose log messages occasionally, especially in periods of high traffic which may be the result of an attack. In addition, remote rsyslog messages are not authenticated in any way by default, so it is easy for an attacker to introduce spurious messages to the central log server. Also, some problems cause loss of network connectivity, which will prevent the sending of messages to the central server. For all of these reasons, it is better to store log messages both centrally and on each host, so that they can be correlated if necessary.

Rule   Ensure Logs Sent To Remote Host   [ref]

To configure rsyslog to send logs to a remote log server, open /etc/rsyslog.conf and read and understand the last section of the file, which describes the multiple directives necessary to activate remote logging. Along with these other directives, the system can be configured to forward its logs to a particular log server by adding or correcting one of the following lines, substituting logcollector appropriately. The choice of protocol depends on the environment of the system; although TCP and RELP provide more reliable message delivery, they may not be supported in all environments.
To use UDP for log message delivery: 
*.* @logcollector

To use TCP for log message delivery: 
*.* @@logcollector

To use RELP for log message delivery: 
*.* :omrelp:logcollector

There must be a resolvable DNS CNAME or Alias record set to "logcollector" for logs to be sent correctly to the centralized logging utility.
Warning:  It is important to configure queues in case the client is sending log messages to a remote server. If queues are not configured, the system will stop functioning when the connection to the remote server is not available. Please consult Rsyslog documentation for more information about configuration of queues. The example configuration which should go into /etc/rsyslog.conf can look like the following lines: 
$ActionQueueType LinkedList
$ActionQueueFileName queuefilename
$ActionQueueMaxDiskSpace 1g
$ActionQueueSaveOnShutdown on
$ActionResumeRetryCount -1
Rationale:
A log server (loghost) receives syslog messages from one or more systems. This data can be used as an additional log source in the event a system is compromised and its local logs are suspect. Forwarding log messages to a remote loghost also provides system administrators with a centralized place to view the status of multiple hosts within the enterprise.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_rsyslog_remote_loghost
Identifiers and References

References:  BP28(R7), NT28(R43), NT12(R5), 1, 13, 14, 15, 16, 2, 3, 5, 6, APO11.04, APO13.01, BAI03.05, BAI04.04, DSS05.04, DSS05.07, MEA02.01, CCI-000366, CCI-001348, CCI-000136, CCI-001851, 164.308(a)(1)(ii)(D), 164.308(a)(5)(ii)(B), 164.308(a)(5)(ii)(C), 164.308(a)(6)(ii), 164.308(a)(8), 164.310(d)(2)(iii), 164.312(b), 164.314(a)(2)(i)(C), 164.314(a)(2)(iii), 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 7.1, SR 7.2, 0988, 1405, A.12.1.3, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.17.2.1, CIP-003-8 R5.2, CIP-004-6 R3.3, CM-6(a), AU-4(1), AU-9(2), PR.DS-4, PR.PT-1, FAU_GEN.1.1.c, SRG-OS-000479-GPOS-00224, SRG-OS-000480-GPOS-00227, SRG-OS-000342-GPOS-00133, 4.2.1.5


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

rsyslog_remote_loghost_address='logcollector'


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^\*\.\*")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "@@$rsyslog_remote_loghost_address"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^\*\.\*\\>" "/etc/rsyslog.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^\*\.\*\\>.*/$escaped_formatted_output/gi" "/etc/rsyslog.conf"
else
    if [[ -s "/etc/rsyslog.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/rsyslog.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/rsyslog.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/rsyslog.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure rsyslog is Installed   [ref]

Rsyslog is installed by default. The rsyslog package can be installed with the following command: 
 $ apt-get install rsyslog
Rationale:
The rsyslog package provides the rsyslog daemon, which provides system logging services.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_rsyslog_installed
Identifiers and References

References:  1, 14, 15, 16, 3, 5, 6, APO11.04, BAI03.05, DSS05.04, DSS05.07, MEA02.01, CCI-001311, CCI-001312, CCI-000366, 164.312(a)(2)(ii), 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, CM-6(a), PR.PT-1, FTP_ITC_EXT.1.1, SRG-OS-000479-GPOS-00224, SRG-OS-000051-GPOS-00024, SRG-OS-000480-GPOS-00227, 4.2.1.1



[[packages]]
name = "rsyslog"
version = "*"

Complexity:low
Disruption:low
Strategy:enable
include install_rsyslog

class install_rsyslog {
  package { 'rsyslog':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure rsyslog is installed
  package:
    name: rsyslog
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_rsyslog_installed

Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

DEBIAN_FRONTEND=noninteractive apt-get install -y "rsyslog"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable rsyslog Service   [ref]

The rsyslog service provides syslog-style logging by default on Ubuntu 20.04. The rsyslog service can be enabled with the following command: 
$ sudo systemctl enable rsyslog.service
Rationale:
The rsyslog service must be running in order to provide logging services, which are essential to system administration.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_service_rsyslog_enabled
Identifiers and References

References:  1, 12, 13, 14, 15, 16, 2, 3, 5, 6, 7, 8, 9, APO10.01, APO10.03, APO10.04, APO10.05, APO11.04, APO13.01, BAI03.05, BAI04.04, DSS01.03, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, MEA01.01, MEA01.02, MEA01.03, MEA01.04, MEA01.05, MEA02.01, CCI-001311, CCI-001312, CCI-001557, CCI-001851, CCI-000366, 164.312(a)(2)(ii), 4.3.2.6.7, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, SR 6.1, SR 6.2, SR 7.1, SR 7.2, A.12.1.3, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, A.14.2.7, A.15.2.1, A.15.2.2, A.17.2.1, CM-6(a), AU-4(1), DE.CM-1, DE.CM-3, DE.CM-7, ID.SC-4, PR.DS-4, PR.PT-1, SRG-OS-000480-GPOS-00227, UBTU-20-010432, 4.2.1.2



[customizations.services]
enabled = ["rsyslog"]

Complexity:low
Disruption:low
Strategy:enable
include enable_rsyslog

class enable_rsyslog {
  service {'rsyslog':
    enable => true,
    ensure => 'running',
  }
}

Complexity:low
Disruption:low
Strategy:enable
- name: Enable service rsyslog
  block:

  - name: Gather the package facts
    package_facts:
      manager: auto

  - name: Enable service rsyslog
    systemd:
      name: rsyslog
      enabled: 'yes'
      state: started
      masked: 'no'
    when:
    - '"rsyslog" in ansible_facts.packages'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - DISA-STIG-UBTU-20-010432
  - NIST-800-53-AU-4(1)
  - NIST-800-53-CM-6(a)
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_rsyslog_enabled

Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'rsyslog.service'
"$SYSTEMCTL_EXEC" start 'rsyslog.service'
"$SYSTEMCTL_EXEC" enable 'rsyslog.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure rsyslog Default File Permissions Configured   [ref]

rsyslog will create logfiles that do not already exist on the system. This settings controls what permissions will be applied to these newly created files.
Rationale:
It is important to ensure that log files have the correct permissions to ensure that sensitive data is archived and protected.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_rsyslog_filecreatemode
Identifiers and References

References:  4.2.1.4


Complexity:low
Disruption:low
Strategy:configure
- name: Ensure rsyslog Default File Permissions Configured - Search for $FileCreateMode
    Parameter in rsyslog Main Config File
  ansible.builtin.find:
    paths: /etc
    pattern: rsyslog.conf
    contains: ^\s*\$FileCreateMode\s*\d+
  register: rsyslog_main_file_with_filecreatemode
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_filecreatemode

- name: Ensure rsyslog Default File Permissions Configured - Search for $FileCreateMode
    Parameter in rsyslog Include Files
  ansible.builtin.find:
    paths: /etc/rsyslog.d/
    pattern: '*.conf'
    contains: ^\s*\$FileCreateMode\s*\d+
  register: rsyslog_includes_with_filecreatemode
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_filecreatemode

- name: Ensure rsyslog Default File Permissions Configured - Assemble List of rsyslog
    Configuration Files with $FileCreateMode Parameter
  ansible.builtin.set_fact:
    rsyslog_filecreatemode_files: '{{ rsyslog_main_file_with_filecreatemode.files
      | map(attribute=''path'') | list + rsyslog_includes_with_filecreatemode.files
      | map(attribute=''path'') | list }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_filecreatemode

- name: Ensure rsyslog Default File Permissions Configured - Remove $FileCreateMode
    Parameter from Multiple Files to Avoid Conflicts
  ansible.builtin.lineinfile:
    path: '{{ item }}'
    regexp: \$FileCreateMode.*
    state: absent
  register: result_rsyslog_filecreatemode_removed
  loop: '{{ rsyslog_filecreatemode_files }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_filecreatemode_files | length > 1
  tags:
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_filecreatemode

- name: Ensure rsyslog Default File Permissions Configured - Add $FileCreateMode Parameter
    and Expected Value
  ansible.builtin.lineinfile:
    path: /etc/rsyslog.d/99-rsyslog_filecreatemode.conf
    line: $FileCreateMode 0640
    mode: 416
    create: true
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_filecreatemode_files | length == 0 or result_rsyslog_filecreatemode_removed
    is not skipped
  tags:
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_filecreatemode

- name: Ensure rsyslog Default File Permissions Configured - Ensure Correct Value
    of Existing $FileCreateMode Parameter
  ansible.builtin.lineinfile:
    path: '{{ item }}'
    regexp: ^\$FileCreateMode
    line: $FileCreateMode 0640
  loop: '{{ rsyslog_filecreatemode_files }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - rsyslog_filecreatemode_files | length == 1
  tags:
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - rsyslog_filecreatemode

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

readarray -t targets < <(grep -H '^\s*$FileCreateMode' /etc/rsyslog.conf /etc/rsyslog.d/*)

# if $FileCreateMode set in multiple places
if [ ${#targets[@]} -gt 1 ]; then
    # delete all and create new entry with expected value
    sed -i '/^\s*$FileCreateMode/d' /etc/rsyslog.conf /etc/rsyslog.d/*
    echo '$FileCreateMode 0640' > /etc/rsyslog.d/99-rsyslog_filecreatemode.conf
# if $FileCreateMode set in only one place
elif [ "${#targets[@]}" -eq 1 ]; then
    filename=$(echo "${targets[0]}" | cut -d':' -f1)
    value=$(echo "${targets[0]}" | cut -d' ' -f2)
    #convert to decimal and bitwise or operation
    result=$((8#$value | 416))
    # if more permissive than expected, then set it to 0640
    if [ $result -ne 416 ]; then
        # if value is wrong remove it
        sed -i '/^\s*$FileCreateMode/d' $filename
        echo '$FileCreateMode 0640' > $filename
    fi
else
    echo '$FileCreateMode 0640' > /etc/rsyslog.d/99-rsyslog_filecreatemode.conf
fi

systemctl restart rsyslog.service

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Network Configuration and Firewalls   Group contains 10 groups and 44 rules
[ref]   Most systems must be connected to a network of some sort, and this brings with it the substantial risk of network attack. This section discusses the security impact of decisions about networking which must be made when configuring a system.

This section also discusses firewalls, network access controls, and other network security frameworks, which allow system-level rules to be written that can limit an attackers' ability to connect to your system. These rules can specify that network traffic should be allowed or denied from certain IP addresses, hosts, and networks. The rules can also specify which of the system's network services are available to particular hosts or networks.
Group   iptables and ip6tables   Group contains 2 groups and 7 rules
[ref]   A host-based firewall called netfilter is included as part of the Linux kernel distributed with the system. It is activated by default. This firewall is controlled by the program iptables, and the entire capability is frequently referred to by this name. An analogous program called ip6tables handles filtering for IPv6.

Unlike TCP Wrappers, which depends on the network server program to support and respect the rules written, netfilter filtering occurs at the kernel level, before a program can even process the data from the network packet. As such, any program on the system is affected by the rules written.

This section provides basic information about strengthening the iptables and ip6tables configurations included with the system. For more complete information that may allow the construction of a sophisticated ruleset tailored to your environment, please consult the references at the end of this section.
Group   Inspect and Activate Default Rules   Group contains 3 rules
[ref]   View the currently-enforced iptables rules by running the command: 
$ sudo iptables -nL --line-numbers
The command is analogous for ip6tables.

If the firewall does not appear to be active (i.e., no rules appear), activate it and ensure that it starts at boot by issuing the following commands (and analogously for ip6tables): 
$ sudo service iptables restart
The default iptables rules are: 
Chain INPUT (policy ACCEPT)
num  target     prot opt source       destination
1    ACCEPT     all  --  0.0.0.0/0    0.0.0.0/0    state RELATED,ESTABLISHED 
2    ACCEPT     icmp --  0.0.0.0/0    0.0.0.0/0
3    ACCEPT     all  --  0.0.0.0/0    0.0.0.0/0
4    ACCEPT     tcp  --  0.0.0.0/0    0.0.0.0/0    state NEW tcp dpt:22 
5    REJECT     all  --  0.0.0.0/0    0.0.0.0/0    reject-with icmp-host-prohibited 

Chain FORWARD (policy ACCEPT)
num  target     prot opt source       destination
1    REJECT     all  --  0.0.0.0/0    0.0.0.0/0    reject-with icmp-host-prohibited 

Chain OUTPUT (policy ACCEPT)
num  target     prot opt source       destination
The ip6tables default rules are essentially the same.

Rule   Set Default ip6tables Policy for Incoming Packets   [ref]

To set the default policy to DROP (instead of ACCEPT) for the built-in INPUT chain which processes incoming packets, add or correct the following line in /etc/sysconfig/ip6tables: 
:INPUT DROP [0:0]
If changes were required, reload the ip6tables rules: 
$ sudo service ip6tables reload
Rationale:
In ip6tables, the default policy is applied only after all the applicable rules in the table are examined for a match. Setting the default policy to DROP implements proper design for a firewall, i.e. any packets which are not explicitly permitted should not be accepted.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_set_ip6tables_default_rule
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CIP-003-8 R4, CIP-003-8 R5, CIP-004-6 R3, AC-4, CM-7(b), CA-3(5), SC-7(21), CM-6(a), PR.IP-1, PR.PT-3, 1.4.1, 3.5.3.3.1


# Remediation is applicable only in certain platforms
if ( ! ( dpkg-query --show --showformat='${db:Status-Status}\n' 'nftables' 2>/dev/null | grep -q installed ) && ! ( dpkg-query --show --showformat='${db:Status-Status}\n' 'ufw' 2>/dev/null | grep -q installed ) ); then

sed -i 's/^:INPUT ACCEPT.*/:INPUT DROP [0:0]/g' /etc/sysconfig/ip6tables

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set configuration for IPv6 loopback traffic   [ref]

Configure the loopback interface to accept traffic. Configure all other interfaces to deny traffic to the loopback network.
Warning:  Changing firewall settings while connected over network can result in being locked out of the system.
Rationale:
Loopback traffic is generated between processes on machine and is typically critical to operation of the system. The loopback interface is the only place that loopback network traffic should be seen, all other interfaces should ignore traffic on this network as an anti-spoofing measure.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_set_ipv6_loopback_traffic
Identifiers and References

References:  Req-1.3, 1.4.1, 3.5.3.3.2


- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - PCI-DSS-Req-1.3
  - PCI-DSSv4-1.4.1
  - medium_severity
  - set_ipv6_loopback_traffic

- name: Check if IPv6 is enabled
  command: sysctl -n net.ipv6.conf.all.disable_ipv6
  register: ipv6_status
  failed_when: ipv6_status.stdout != "0"
  when: ( not ( "nftables" in ansible_facts.packages ) and not ( "ufw" in ansible_facts.packages
    ) )
  tags:
  - PCI-DSS-Req-1.3
  - PCI-DSSv4-1.4.1
  - medium_severity
  - set_ipv6_loopback_traffic

- name: Allow incoming traffic on the loopback interface
  ansible.builtin.iptables:
    ipv6: true
    chain: INPUT
    in_interface: lo
    jump: ACCEPT
  when:
  - ( not ( "nftables" in ansible_facts.packages ) and not ( "ufw" in ansible_facts.packages
    ) )
  - ipv6_status.stdout == '0'
  tags:
  - PCI-DSS-Req-1.3
  - PCI-DSSv4-1.4.1
  - medium_severity
  - set_ipv6_loopback_traffic

- name: Allow outgoing traffic on the loopback interface
  ansible.builtin.iptables:
    ipv6: true
    chain: OUTPUT
    out_interface: lo
    jump: ACCEPT
  when:
  - ( not ( "nftables" in ansible_facts.packages ) and not ( "ufw" in ansible_facts.packages
    ) )
  - ipv6_status.stdout == '0'
  tags:
  - PCI-DSS-Req-1.3
  - PCI-DSSv4-1.4.1
  - medium_severity
  - set_ipv6_loopback_traffic

- name: Drop incoming traffic from the localhost
  ansible.builtin.iptables:
    ipv6: true
    chain: INPUT
    source: ::1
    jump: DROP
  when:
  - ( not ( "nftables" in ansible_facts.packages ) and not ( "ufw" in ansible_facts.packages
    ) )
  - ipv6_status.stdout == '0'
  tags:
  - PCI-DSS-Req-1.3
  - PCI-DSSv4-1.4.1
  - medium_severity
  - set_ipv6_loopback_traffic


# Remediation is applicable only in certain platforms
if ( ! ( dpkg-query --show --showformat='${db:Status-Status}\n' 'nftables' 2>/dev/null | grep -q installed ) && ! ( dpkg-query --show --showformat='${db:Status-Status}\n' 'ufw' 2>/dev/null | grep -q installed ) ); then

if [ "$(sysctl -n net.ipv6.conf.all.disable_ipv6)" -eq 0 ]; then
  # IPv6 is not disabled, so run the script
  ip6tables -A INPUT -i lo -j ACCEPT
  ip6tables -A OUTPUT -o lo -j ACCEPT
  ip6tables -A INPUT -s ::1 -j DROP
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set configuration for loopback traffic   [ref]

Configure the loopback interface to accept traffic. Configure all other interfaces to deny traffic to the loopback network.
Warning:  Changing firewall settings while connected over network can result in being locked out of the system.
Rationale:
Loopback traffic is generated between processes on machine and is typically critical to operation of the system. The loopback interface is the only place that loopback network traffic should be seen, all other interfaces should ignore traffic on this network as an anti-spoofing measure.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_set_loopback_traffic
Identifiers and References

References:  Req-1.3, 1.4.1, 3.5.3.2.2


- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - PCI-DSS-Req-1.3
  - PCI-DSSv4-1.4.1
  - medium_severity
  - set_loopback_traffic

- name: Allow incoming traffic on the loopback interface
  ansible.builtin.iptables:
    chain: INPUT
    in_interface: lo
    jump: ACCEPT
  when: ( not ( "nftables" in ansible_facts.packages ) and not ( "ufw" in ansible_facts.packages
    ) )
  tags:
  - PCI-DSS-Req-1.3
  - PCI-DSSv4-1.4.1
  - medium_severity
  - set_loopback_traffic

- name: Allow outgoing traffic on the loopback interface
  ansible.builtin.iptables:
    chain: OUTPUT
    out_interface: lo
    jump: ACCEPT
  when: ( not ( "nftables" in ansible_facts.packages ) and not ( "ufw" in ansible_facts.packages
    ) )
  tags:
  - PCI-DSS-Req-1.3
  - PCI-DSSv4-1.4.1
  - medium_severity
  - set_loopback_traffic

- name: Drop incoming traffic from the localhost
  ansible.builtin.iptables:
    chain: INPUT
    source: 127.0.0.0/8
    jump: DROP
  when: ( not ( "nftables" in ansible_facts.packages ) and not ( "ufw" in ansible_facts.packages
    ) )
  tags:
  - PCI-DSS-Req-1.3
  - PCI-DSSv4-1.4.1
  - medium_severity
  - set_loopback_traffic


# Remediation is applicable only in certain platforms
if ( ! ( dpkg-query --show --showformat='${db:Status-Status}\n' 'nftables' 2>/dev/null | grep -q installed ) && ! ( dpkg-query --show --showformat='${db:Status-Status}\n' 'ufw' 2>/dev/null | grep -q installed ) ); then

iptables -A INPUT -i lo -j ACCEPT
iptables -A OUTPUT -o lo -j ACCEPT
iptables -A INPUT -s 127.0.0.0/8 -j DROP

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Strengthen the Default Ruleset   Group contains 1 rule
[ref]   The default rules can be strengthened. The system scripts that activate the firewall rules expect them to be defined in the configuration files iptables and ip6tables in the directory /etc/sysconfig. Many of the lines in these files are similar to the command line arguments that would be provided to the programs /sbin/iptables or /sbin/ip6tables - but some are quite different.

The following recommendations describe how to strengthen the default ruleset configuration file. An alternative to editing this configuration file is to create a shell script that makes calls to the iptables program to load in rules, and then invokes service iptables save to write those loaded rules to /etc/sysconfig/iptables.

The following alterations can be made directly to /etc/sysconfig/iptables and /etc/sysconfig/ip6tables. Instructions apply to both unless otherwise noted. Language and address conventions for regular iptables are used throughout this section; configuration for ip6tables will be either analogous or explicitly covered.
Warning:  The program system-config-securitylevel allows additional services to penetrate the default firewall rules and automatically adjusts /etc/sysconfig/iptables. This program is only useful if the default ruleset meets your security requirements. Otherwise, this program should not be used to make changes to the firewall configuration because it re-writes the saved configuration file.

Rule   Set Default iptables Policy for Incoming Packets   [ref]

To set the default policy to DROP (instead of ACCEPT) for the built-in INPUT chain which processes incoming packets, add or correct the following line in /etc/sysconfig/iptables: 
:INPUT DROP [0:0]
Rationale:
In iptables the default policy is applied only after all the applicable rules in the table are examined for a match. Setting the default policy to DROP implements proper design for a firewall, i.e. any packets which are not explicitly permitted should not be accepted.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_set_iptables_default_rule
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CA-3(5), CM-7(b), SC-7(23), CM-6(a), PR.IP-1, PR.PT-3, 3.5.3.2.1


# Remediation is applicable only in certain platforms
if ( ! ( dpkg-query --show --showformat='${db:Status-Status}\n' 'nftables' 2>/dev/null | grep -q installed ) && ! ( dpkg-query --show --showformat='${db:Status-Status}\n' 'ufw' 2>/dev/null | grep -q installed ) ); then

sed -i 's/^:INPUT ACCEPT.*/:INPUT DROP [0:0]/g' /etc/sysconfig/iptables

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Install iptables-persistent Package   [ref]

The iptables-persistent package can be installed with the following command: 
$ apt-get install iptables-persistent
Rationale:
A method of configuring and maintaining firewall rules is necessary to configure a Host Based Firewall.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_iptables-persistent_installed
Identifiers and References

References:  3.5.3.1.1



[[packages]]
name = "iptables-persistent"
version = "*"

Complexity:low
Disruption:low
Strategy:enable
include install_iptables-persistent

class install_iptables-persistent {
  package { 'iptables-persistent':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure iptables-persistent is installed
  package:
    name: iptables-persistent
    state: present
  tags:
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_iptables-persistent_installed

Complexity:low
Disruption:low
Strategy:enable

DEBIAN_FRONTEND=noninteractive apt-get install -y "iptables-persistent"

Rule   Install iptables Package   [ref]

The iptables package can be installed with the following command: 
$ apt-get install iptables
Rationale:
iptables controls the Linux kernel network packet filtering code. iptables allows system operators to set up firewalls and IP masquerading, etc.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_iptables_installed
Identifiers and References

References:  CM-6(a), Req-1.4.1, 1.4.2, SRG-OS-000480-GPOS-00227, 3.5.3.1.1



[[packages]]
name = "iptables"
version = "*"

Complexity:low
Disruption:low
Strategy:enable
include install_iptables

class install_iptables {
  package { 'iptables':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure iptables is installed
  package:
    name: iptables
    state: present
  tags:
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-1.4.1
  - PCI-DSSv4-1.4.2
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_iptables_installed

Complexity:low
Disruption:low
Strategy:enable

DEBIAN_FRONTEND=noninteractive apt-get install -y "iptables"

Rule   Remove iptables-persistent Package   [ref]

The iptables-persistent package can be removed with the following command: 
$ apt-get remove iptables-persistent
Rationale:
Running both ufw and the services included in the iptables-persistent package may lead to conflict.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_iptables-persistent_removed
Identifiers and References

References:  3.5.1.2


Complexity:low
Disruption:low
Strategy:disable
include remove_iptables-persistent

class remove_iptables-persistent {
  package { 'iptables-persistent':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure iptables-persistent is removed
  package:
    name: iptables-persistent
    state: absent
  tags:
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_iptables-persistent_removed

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove iptables-persistent
#	   from the system, and may remove any packages
#	   that depend on iptables-persistent. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "iptables-persistent"
Group   IPv6   Group contains 1 group and 7 rules
[ref]   The system includes support for Internet Protocol version 6. A major and often-mentioned improvement over IPv4 is its enormous increase in the number of available addresses. Another important feature is its support for automatic configuration of many network settings.
Group   Configure IPv6 Settings if Necessary   Group contains 7 rules
[ref]   A major feature of IPv6 is the extent to which systems implementing it can automatically configure their networking devices using information from the network. From a security perspective, manually configuring important configuration information is preferable to accepting it from the network in an unauthenticated fashion.

Rule   Configure Accepting Router Advertisements on All IPv6 Interfaces   [ref]

To set the runtime status of the net.ipv6.conf.all.accept_ra kernel parameter, run the following command: 
$ sudo sysctl -w net.ipv6.conf.all.accept_ra=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
net.ipv6.conf.all.accept_ra = 0
Rationale:
An illicit router advertisement message could result in a man-in-the-middle attack.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_ra
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.1.20, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, SRG-OS-000480-GPOS-00227, 3.3.9


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.all.accept_ra.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_ra

- name: Comment out any occurrences of net.ipv6.conf.all.accept_ra from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.all.accept_ra
    replace: '#net.ipv6.conf.all.accept_ra'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_ra
- name: XCCDF Value sysctl_net_ipv6_conf_all_accept_ra_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_all_accept_ra_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.all.accept_ra is set
  sysctl:
    name: net.ipv6.conf.all.accept_ra
    value: '{{ sysctl_net_ipv6_conf_all_accept_ra_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_ra

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.all.accept_ra from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.accept_ra.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.accept_ra" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_all_accept_ra_value='0'


#
# Set runtime for net.ipv6.conf.all.accept_ra
#
/sbin/sysctl -q -n -w net.ipv6.conf.all.accept_ra="$sysctl_net_ipv6_conf_all_accept_ra_value"

#
# If net.ipv6.conf.all.accept_ra present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_ra = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.accept_ra")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_accept_ra_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.accept_ra\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.accept_ra\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Accepting ICMP Redirects for All IPv6 Interfaces   [ref]

To set the runtime status of the net.ipv6.conf.all.accept_redirects kernel parameter, run the following command: 
$ sudo sysctl -w net.ipv6.conf.all.accept_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
net.ipv6.conf.all.accept_redirects = 0
Rationale:
An illicit ICMP redirect message could result in a man-in-the-middle attack.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_redirects
Identifiers and References

References:  BP28(R22), 11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.1.20, CCI-000366, CCI-001551, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), CM-6(b), CM-6.1(iv), PR.IP-1, PR.PT-3, SRG-OS-000480-GPOS-00227, 3.3.2


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.all.accept_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_redirects

- name: Comment out any occurrences of net.ipv6.conf.all.accept_redirects from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.all.accept_redirects
    replace: '#net.ipv6.conf.all.accept_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_redirects
- name: XCCDF Value sysctl_net_ipv6_conf_all_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_all_accept_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.all.accept_redirects is set
  sysctl:
    name: net.ipv6.conf.all.accept_redirects
    value: '{{ sysctl_net_ipv6_conf_all_accept_redirects_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_redirects

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.all.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.accept_redirects" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_all_accept_redirects_value='0'


#
# Set runtime for net.ipv6.conf.all.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv6.conf.all.accept_redirects="$sysctl_net_ipv6_conf_all_accept_redirects_value"

#
# If net.ipv6.conf.all.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.accept_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.accept_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv6 Interfaces   [ref]

To set the runtime status of the net.ipv6.conf.all.accept_source_route kernel parameter, run the following command: 
$ sudo sysctl -w net.ipv6.conf.all.accept_source_route=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
net.ipv6.conf.all.accept_source_route = 0
Rationale:
Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routerd traffic, such as when IPv6 forwarding is enabled and the system is functioning as a router.

Accepting source-routed packets in the IPv6 protocol has few legitimate uses. It should be disabled unless it is absolutely required.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_accept_source_route
Identifiers and References

References:  BP28(R22), 1, 12, 13, 14, 15, 16, 18, 4, 6, 8, 9, APO01.06, APO13.01, DSS01.05, DSS03.01, DSS05.02, DSS05.04, DSS05.07, DSS06.02, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.4.3.3, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-7(a), CM-7(b), CM-6(a), DE.AE-1, ID.AM-3, PR.AC-5, PR.DS-5, PR.PT-4, SRG-OS-000480-GPOS-00227, 3.3.1


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.all.accept_source_route.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_source_route

- name: Comment out any occurrences of net.ipv6.conf.all.accept_source_route from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.all.accept_source_route
    replace: '#net.ipv6.conf.all.accept_source_route'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_source_route
- name: XCCDF Value sysctl_net_ipv6_conf_all_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_all_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.all.accept_source_route is set
  sysctl:
    name: net.ipv6.conf.all.accept_source_route
    value: '{{ sysctl_net_ipv6_conf_all_accept_source_route_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_accept_source_route

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.all.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.accept_source_route" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_all_accept_source_route_value='0'


#
# Set runtime for net.ipv6.conf.all.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv6.conf.all.accept_source_route="$sysctl_net_ipv6_conf_all_accept_source_route_value"

#
# If net.ipv6.conf.all.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_source_route = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Kernel Parameter for IPv6 Forwarding   [ref]

To set the runtime status of the net.ipv6.conf.all.forwarding kernel parameter, run the following command: 
$ sudo sysctl -w net.ipv6.conf.all.forwarding=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
net.ipv6.conf.all.forwarding = 0
Rationale:
IP forwarding permits the kernel to forward packets from one network interface to another. The ability to forward packets between two networks is only appropriate for systems acting as routers.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_all_forwarding
Identifiers and References

References:  1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, DSS06.06, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), CM-6(b), CM-6.1(iv), DE.CM-1, PR.DS-4, PR.IP-1, PR.PT-3, SRG-OS-000480-GPOS-00227, 3.2.2


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.all.forwarding.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_forwarding

- name: Comment out any occurrences of net.ipv6.conf.all.forwarding from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.all.forwarding
    replace: '#net.ipv6.conf.all.forwarding'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_forwarding
- name: XCCDF Value sysctl_net_ipv6_conf_all_forwarding_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_all_forwarding_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.all.forwarding is set
  sysctl:
    name: net.ipv6.conf.all.forwarding
    value: '{{ sysctl_net_ipv6_conf_all_forwarding_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_all_forwarding

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.all.forwarding from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.all.forwarding.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.all.forwarding" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_all_forwarding_value='0'


#
# Set runtime for net.ipv6.conf.all.forwarding
#
/sbin/sysctl -q -n -w net.ipv6.conf.all.forwarding="$sysctl_net_ipv6_conf_all_forwarding_value"

#
# If net.ipv6.conf.all.forwarding present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.forwarding = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.all.forwarding")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_all_forwarding_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.all.forwarding\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.all.forwarding\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Accepting Router Advertisements on all IPv6 Interfaces by Default   [ref]

To set the runtime status of the net.ipv6.conf.default.accept_ra kernel parameter, run the following command: 
$ sudo sysctl -w net.ipv6.conf.default.accept_ra=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
net.ipv6.conf.default.accept_ra = 0
Rationale:
An illicit router advertisement message could result in a man-in-the-middle attack.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_ra
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.1.20, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, SRG-OS-000480-GPOS-00227, 3.3.9


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.default.accept_ra.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_ra

- name: Comment out any occurrences of net.ipv6.conf.default.accept_ra from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.default.accept_ra
    replace: '#net.ipv6.conf.default.accept_ra'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_ra
- name: XCCDF Value sysctl_net_ipv6_conf_default_accept_ra_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_default_accept_ra_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.default.accept_ra is set
  sysctl:
    name: net.ipv6.conf.default.accept_ra
    value: '{{ sysctl_net_ipv6_conf_default_accept_ra_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_ra

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.default.accept_ra from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_ra.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_ra" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_default_accept_ra_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_ra
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_ra="$sysctl_net_ipv6_conf_default_accept_ra_value"

#
# If net.ipv6.conf.default.accept_ra present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_ra = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_ra")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_ra_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_ra\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.accept_ra\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv6 Interfaces   [ref]

To set the runtime status of the net.ipv6.conf.default.accept_redirects kernel parameter, run the following command: 
$ sudo sysctl -w net.ipv6.conf.default.accept_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
net.ipv6.conf.default.accept_redirects = 0
Rationale:
An illicit ICMP redirect message could result in a man-in-the-middle attack.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_redirects
Identifiers and References

References:  BP28(R22), 11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.1.20, CCI-000366, CCI-001551, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, SRG-OS-000480-GPOS-00227, 3.3.2


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.default.accept_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_redirects

- name: Comment out any occurrences of net.ipv6.conf.default.accept_redirects from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.default.accept_redirects
    replace: '#net.ipv6.conf.default.accept_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_redirects
- name: XCCDF Value sysctl_net_ipv6_conf_default_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_default_accept_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.default.accept_redirects is set
  sysctl:
    name: net.ipv6.conf.default.accept_redirects
    value: '{{ sysctl_net_ipv6_conf_default_accept_redirects_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_redirects

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.default.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_redirects" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_default_accept_redirects_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_redirects="$sysctl_net_ipv6_conf_default_accept_redirects_value"

#
# If net.ipv6.conf.default.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.accept_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Kernel Parameter for Accepting Source-Routed Packets on IPv6 Interfaces by Default   [ref]

To set the runtime status of the net.ipv6.conf.default.accept_source_route kernel parameter, run the following command: 
$ sudo sysctl -w net.ipv6.conf.default.accept_source_route=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
net.ipv6.conf.default.accept_source_route = 0
Rationale:
Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routerd traffic, such as when IPv6 forwarding is enabled and the system is functioning as a router. Accepting source-routed packets in the IPv6 protocol has few legitimate uses. It should be disabled unless it is absolutely required.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv6_conf_default_accept_source_route
Identifiers and References

References:  BP28(R22), 1, 12, 13, 14, 15, 16, 18, 4, 6, 8, 9, APO01.06, APO13.01, DSS01.05, DSS03.01, DSS05.02, DSS05.04, DSS05.07, DSS06.02, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.4.3.3, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-7(a), CM-7(b), CM-6(a), CM-6(b), CM-6.1(iv), DE.AE-1, ID.AM-3, PR.AC-5, PR.DS-5, PR.PT-4, Req-1.4.3, SRG-OS-000480-GPOS-00227, 3.3.1


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv6.conf.default.accept_source_route.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_source_route

- name: Comment out any occurrences of net.ipv6.conf.default.accept_source_route from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv6.conf.default.accept_source_route
    replace: '#net.ipv6.conf.default.accept_source_route'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_source_route
- name: XCCDF Value sysctl_net_ipv6_conf_default_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_default_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.default.accept_source_route is set
  sysctl:
    name: net.ipv6.conf.default.accept_source_route
    value: '{{ sysctl_net_ipv6_conf_default_accept_source_route_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-6(b)
  - NIST-800-53-CM-6.1(iv)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv6_conf_default_accept_source_route

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv6.conf.default.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv6.conf.default.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv6.conf.default.accept_source_route" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv6_conf_default_accept_source_route_value='0'


#
# Set runtime for net.ipv6.conf.default.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_source_route="$sysctl_net_ipv6_conf_default_accept_source_route_value"

#
# If net.ipv6.conf.default.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_source_route = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv6.conf.default.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv6_conf_default_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv6.conf.default.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv6.conf.default.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Kernel Parameters Which Affect Networking   Group contains 2 groups and 16 rules
[ref]   The sysctl utility is used to set parameters which affect the operation of the Linux kernel. Kernel parameters which affect networking and have security implications are described here.
Group   Network Related Kernel Runtime Parameters for Hosts and Routers   Group contains 13 rules
[ref]   Certain kernel parameters should be set for systems which are acting as either hosts or routers to improve the system's ability defend against certain types of IPv4 protocol attacks.

Rule   Disable Accepting ICMP Redirects for All IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.all.accept_redirects kernel parameter, run the following command: 
$ sudo sysctl -w net.ipv4.conf.all.accept_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
net.ipv4.conf.all.accept_redirects = 0
Rationale:
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages modify the host's route table and are unauthenticated. An illicit ICMP redirect message could result in a man-in-the-middle attack.
This feature of the IPv4 protocol has few legitimate uses. It should be disabled unless absolutely required."
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_redirects
Identifiers and References

References:  BP28(R22), 1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9, 5.10.1.1, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, DSS06.06, 3.1.20, CCI-000366, CCI-001503, CCI-001551, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), SC-7(a), DE.CM-1, PR.DS-4, PR.IP-1, PR.PT-3, SRG-OS-000480-GPOS-00227, 3.3.2


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.accept_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_redirects

- name: Comment out any occurrences of net.ipv4.conf.all.accept_redirects from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.accept_redirects
    replace: '#net.ipv4.conf.all.accept_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_redirects
- name: XCCDF Value sysctl_net_ipv4_conf_all_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_accept_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.accept_redirects is set
  sysctl:
    name: net.ipv4.conf.all.accept_redirects
    value: '{{ sysctl_net_ipv4_conf_all_accept_redirects_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_redirects

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.accept_redirects" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_accept_redirects_value='0'


#
# Set runtime for net.ipv4.conf.all.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.accept_redirects="$sysctl_net_ipv4_conf_all_accept_redirects_value"

#
# If net.ipv4.conf.all.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.accept_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.accept_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.accept_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.all.accept_source_route kernel parameter, run the following command: 
$ sudo sysctl -w net.ipv4.conf.all.accept_source_route=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
net.ipv4.conf.all.accept_source_route = 0
Rationale:
Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routerd traffic, such as when IPv4 forwarding is enabled and the system is functioning as a router.

Accepting source-routed packets in the IPv4 protocol has few legitimate uses. It should be disabled unless it is absolutely required.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_accept_source_route
Identifiers and References

References:  BP28(R22), 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-7(a), CM-7(b), SC-5, CM-6(a), SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227, 3.3.1


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.accept_source_route.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_source_route

- name: Comment out any occurrences of net.ipv4.conf.all.accept_source_route from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.accept_source_route
    replace: '#net.ipv4.conf.all.accept_source_route'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_source_route
- name: XCCDF Value sysctl_net_ipv4_conf_all_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.accept_source_route is set
  sysctl:
    name: net.ipv4.conf.all.accept_source_route
    value: '{{ sysctl_net_ipv4_conf_all_accept_source_route_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_accept_source_route

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.accept_source_route" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_accept_source_route_value='0'


#
# Set runtime for net.ipv4.conf.all.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.accept_source_route="$sysctl_net_ipv4_conf_all_accept_source_route_value"

#
# If net.ipv4.conf.all.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.accept_source_route = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable Kernel Parameter to Log Martian Packets on all IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.all.log_martians kernel parameter, run the following command: 
$ sudo sysctl -w net.ipv4.conf.all.log_martians=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
net.ipv4.conf.all.log_martians = 1
Rationale:
The presence of "martian" packets (which have impossible addresses) as well as spoofed packets, source-routed packets, and redirects could be a sign of nefarious network activity. Logging these packets enables this activity to be detected.
Severity: 
unknown
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_log_martians
Identifiers and References

References:  1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.04, DSS03.05, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.06, 3.1.20, CCI-000126, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.11.2.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.2.1, A.6.2.2, A.9.1.2, CM-7(a), CM-7(b), SC-5(3)(a), DE.CM-1, PR.AC-3, PR.DS-4, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227, 3.3.4


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.log_martians.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_all_log_martians
  - unknown_severity

- name: Comment out any occurrences of net.ipv4.conf.all.log_martians from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.log_martians
    replace: '#net.ipv4.conf.all.log_martians'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_all_log_martians
  - unknown_severity
- name: XCCDF Value sysctl_net_ipv4_conf_all_log_martians_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_log_martians_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.log_martians is set
  sysctl:
    name: net.ipv4.conf.all.log_martians
    value: '{{ sysctl_net_ipv4_conf_all_log_martians_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_all_log_martians
  - unknown_severity

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.log_martians from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.log_martians.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.log_martians" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_log_martians_value='1'


#
# Set runtime for net.ipv4.conf.all.log_martians
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.log_martians="$sysctl_net_ipv4_conf_all_log_martians_value"

#
# If net.ipv4.conf.all.log_martians present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.log_martians = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.log_martians")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_log_martians_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.log_martians\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.log_martians\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.all.rp_filter kernel parameter, run the following command: 
$ sudo sysctl -w net.ipv4.conf.all.rp_filter=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
net.ipv4.conf.all.rp_filter = 1
Rationale:
Enabling reverse path filtering drops packets with source addresses that should not have been able to be received on the interface they were received on. It should not be used on systems which are routers for complicated networks, but is helpful for end hosts and routers serving small networks.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_rp_filter
Identifiers and References

References:  BP28(R22), 1, 12, 13, 14, 15, 16, 18, 2, 4, 6, 7, 8, 9, APO01.06, APO13.01, BAI04.04, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.07, DSS06.02, 3.1.20, CCI-000366, CCI-001551, 4.2.3.4, 4.3.3.4, 4.4.3.3, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-7(a), CM-7(b), CM-6(a), SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.PT-4, Req-1.4.3, SRG-OS-000480-GPOS-00227, 3.3.7


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.rp_filter.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_rp_filter

- name: Comment out any occurrences of net.ipv4.conf.all.rp_filter from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.rp_filter
    replace: '#net.ipv4.conf.all.rp_filter'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_rp_filter
- name: XCCDF Value sysctl_net_ipv4_conf_all_rp_filter_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_rp_filter_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.rp_filter is set
  sysctl:
    name: net.ipv4.conf.all.rp_filter
    value: '{{ sysctl_net_ipv4_conf_all_rp_filter_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_rp_filter

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.rp_filter from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.rp_filter.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.rp_filter" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_rp_filter_value='1'


#
# Set runtime for net.ipv4.conf.all.rp_filter
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.rp_filter="$sysctl_net_ipv4_conf_all_rp_filter_value"

#
# If net.ipv4.conf.all.rp_filter present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.rp_filter = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.rp_filter")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_rp_filter_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.rp_filter\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.rp_filter\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Kernel Parameter for Accepting Secure ICMP Redirects on all IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.all.secure_redirects kernel parameter, run the following command: 
$ sudo sysctl -w net.ipv4.conf.all.secure_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
net.ipv4.conf.all.secure_redirects = 0
Rationale:
Accepting "secure" ICMP redirects (from those gateways listed as default gateways) has few legitimate uses. It should be disabled unless it is absolutely required.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_secure_redirects
Identifiers and References

References:  BP28(R22), 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-001503, CCI-001551, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-7(a), CM-7(b), CM-6(a), SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, Req-1.4.3, SRG-OS-000480-GPOS-00227, 3.3.3


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.secure_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_secure_redirects

- name: Comment out any occurrences of net.ipv4.conf.all.secure_redirects from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.secure_redirects
    replace: '#net.ipv4.conf.all.secure_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_secure_redirects
- name: XCCDF Value sysctl_net_ipv4_conf_all_secure_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_secure_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.secure_redirects is set
  sysctl:
    name: net.ipv4.conf.all.secure_redirects
    value: '{{ sysctl_net_ipv4_conf_all_secure_redirects_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_secure_redirects

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.secure_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.secure_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.secure_redirects" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_all_secure_redirects_value='0'


#
# Set runtime for net.ipv4.conf.all.secure_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.secure_redirects="$sysctl_net_ipv4_conf_all_secure_redirects_value"

#
# If net.ipv4.conf.all.secure_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.secure_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.secure_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_all_secure_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.secure_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.secure_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.default.accept_redirects kernel parameter, run the following command: 
$ sudo sysctl -w net.ipv4.conf.default.accept_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
net.ipv4.conf.default.accept_redirects = 0
Rationale:
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages modify the host's route table and are unauthenticated. An illicit ICMP redirect message could result in a man-in-the-middle attack.
This feature of the IPv4 protocol has few legitimate uses. It should be disabled unless absolutely required.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_redirects
Identifiers and References

References:  BP28(R22), 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-000366, CCI-001551, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-7(a), CM-7(b), CM-6(a), SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, Req-1.4.3, SRG-OS-000480-GPOS-00227, 3.3.2


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.accept_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_redirects

- name: Comment out any occurrences of net.ipv4.conf.default.accept_redirects from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.accept_redirects
    replace: '#net.ipv4.conf.default.accept_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_redirects
- name: XCCDF Value sysctl_net_ipv4_conf_default_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_accept_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.accept_redirects is set
  sysctl:
    name: net.ipv4.conf.default.accept_redirects
    value: '{{ sysctl_net_ipv4_conf_default_accept_redirects_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_redirects

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.default.accept_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.accept_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.accept_redirects" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_accept_redirects_value='0'


#
# Set runtime for net.ipv4.conf.default.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.accept_redirects="$sysctl_net_ipv4_conf_default_accept_redirects_value"

#
# If net.ipv4.conf.default.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.accept_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.accept_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_accept_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.accept_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.accept_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Kernel Parameter for Accepting Source-Routed Packets on IPv4 Interfaces by Default   [ref]

To set the runtime status of the net.ipv4.conf.default.accept_source_route kernel parameter, run the following command: 
$ sudo sysctl -w net.ipv4.conf.default.accept_source_route=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
net.ipv4.conf.default.accept_source_route = 0
Rationale:
Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures.
Accepting source-routed packets in the IPv4 protocol has few legitimate uses. It should be disabled unless it is absolutely required, such as when IPv4 forwarding is enabled and the system is legitimately functioning as a router.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_accept_source_route
Identifiers and References

References:  BP28(R22), 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-000366, CCI-001551, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-7(a), CM-7(b), SC-5, SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227, 3.3.1


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.accept_source_route.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_source_route

- name: Comment out any occurrences of net.ipv4.conf.default.accept_source_route from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.accept_source_route
    replace: '#net.ipv4.conf.default.accept_source_route'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_source_route
- name: XCCDF Value sysctl_net_ipv4_conf_default_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.accept_source_route is set
  sysctl:
    name: net.ipv4.conf.default.accept_source_route
    value: '{{ sysctl_net_ipv4_conf_default_accept_source_route_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_accept_source_route

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.default.accept_source_route from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.accept_source_route.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.accept_source_route" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_accept_source_route_value='0'


#
# Set runtime for net.ipv4.conf.default.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.accept_source_route="$sysctl_net_ipv4_conf_default_accept_source_route_value"

#
# If net.ipv4.conf.default.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.accept_source_route = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.accept_source_route")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_accept_source_route_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.accept_source_route\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.accept_source_route\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable Kernel Paremeter to Log Martian Packets on all IPv4 Interfaces by Default   [ref]

To set the runtime status of the net.ipv4.conf.default.log_martians kernel parameter, run the following command: 
$ sudo sysctl -w net.ipv4.conf.default.log_martians=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
net.ipv4.conf.default.log_martians = 1
Rationale:
The presence of "martian" packets (which have impossible addresses) as well as spoofed packets, source-routed packets, and redirects could be a sign of nefarious network activity. Logging these packets enables this activity to be detected.
Severity: 
unknown
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_log_martians
Identifiers and References

References:  1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.04, DSS03.05, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.06, 3.1.20, CCI-000126, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.11.2.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.2.1, A.6.2.2, A.9.1.2, CM-7(a), CM-7(b), SC-5(3)(a), DE.CM-1, PR.AC-3, PR.DS-4, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227, 3.3.4


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.log_martians.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_default_log_martians
  - unknown_severity

- name: Comment out any occurrences of net.ipv4.conf.default.log_martians from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.log_martians
    replace: '#net.ipv4.conf.default.log_martians'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_default_log_martians
  - unknown_severity
- name: XCCDF Value sysctl_net_ipv4_conf_default_log_martians_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_log_martians_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.log_martians is set
  sysctl:
    name: net.ipv4.conf.default.log_martians
    value: '{{ sysctl_net_ipv4_conf_default_log_martians_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(3)(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_conf_default_log_martians
  - unknown_severity

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.default.log_martians from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.log_martians.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.log_martians" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_log_martians_value='1'


#
# Set runtime for net.ipv4.conf.default.log_martians
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.log_martians="$sysctl_net_ipv4_conf_default_log_martians_value"

#
# If net.ipv4.conf.default.log_martians present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.log_martians = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.log_martians")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_log_martians_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.log_martians\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.log_martians\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces by Default   [ref]

To set the runtime status of the net.ipv4.conf.default.rp_filter kernel parameter, run the following command: 
$ sudo sysctl -w net.ipv4.conf.default.rp_filter=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
net.ipv4.conf.default.rp_filter = 1
Rationale:
Enabling reverse path filtering drops packets with source addresses that should not have been able to be received on the interface they were received on. It should not be used on systems which are routers for complicated networks, but is helpful for end hosts and routers serving small networks.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_rp_filter
Identifiers and References

References:  BP28(R22), 1, 12, 13, 14, 15, 16, 18, 2, 4, 6, 7, 8, 9, APO01.06, APO13.01, BAI04.04, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.07, DSS06.02, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.4.3.3, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-7(a), CM-7(b), CM-6(a), SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.PT-4, SRG-OS-000480-GPOS-00227, 3.3.7


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.rp_filter.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_rp_filter

- name: Comment out any occurrences of net.ipv4.conf.default.rp_filter from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.rp_filter
    replace: '#net.ipv4.conf.default.rp_filter'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_rp_filter
- name: XCCDF Value sysctl_net_ipv4_conf_default_rp_filter_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_rp_filter_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.rp_filter is set
  sysctl:
    name: net.ipv4.conf.default.rp_filter
    value: '{{ sysctl_net_ipv4_conf_default_rp_filter_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_rp_filter

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.default.rp_filter from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.rp_filter.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.rp_filter" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_rp_filter_value='1'


#
# Set runtime for net.ipv4.conf.default.rp_filter
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.rp_filter="$sysctl_net_ipv4_conf_default_rp_filter_value"

#
# If net.ipv4.conf.default.rp_filter present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.rp_filter = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.rp_filter")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_rp_filter_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.rp_filter\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.rp_filter\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Configure Kernel Parameter for Accepting Secure Redirects By Default   [ref]

To set the runtime status of the net.ipv4.conf.default.secure_redirects kernel parameter, run the following command: 
$ sudo sysctl -w net.ipv4.conf.default.secure_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
net.ipv4.conf.default.secure_redirects = 0
Rationale:
Accepting "secure" ICMP redirects (from those gateways listed as default gateways) has few legitimate uses. It should be disabled unless it is absolutely required.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_secure_redirects
Identifiers and References

References:  BP28(R22), 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-001551, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-7(a), CM-7(b), SC-5, SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227, 3.3.3


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.secure_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_secure_redirects

- name: Comment out any occurrences of net.ipv4.conf.default.secure_redirects from
    config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.secure_redirects
    replace: '#net.ipv4.conf.default.secure_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_secure_redirects
- name: XCCDF Value sysctl_net_ipv4_conf_default_secure_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_secure_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.secure_redirects is set
  sysctl:
    name: net.ipv4.conf.default.secure_redirects
    value: '{{ sysctl_net_ipv4_conf_default_secure_redirects_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_secure_redirects

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.default.secure_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.secure_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.secure_redirects" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_conf_default_secure_redirects_value='0'


#
# Set runtime for net.ipv4.conf.default.secure_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.secure_redirects="$sysctl_net_ipv4_conf_default_secure_redirects_value"

#
# If net.ipv4.conf.default.secure_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.secure_redirects = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.secure_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_conf_default_secure_redirects_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.secure_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.secure_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable Kernel Parameter to Ignore ICMP Broadcast Echo Requests on IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.icmp_echo_ignore_broadcasts kernel parameter, run the following command: 
$ sudo sysctl -w net.ipv4.icmp_echo_ignore_broadcasts=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
net.ipv4.icmp_echo_ignore_broadcasts = 1
Rationale:
Responding to broadcast (ICMP) echoes facilitates network mapping and provides a vector for amplification attacks.
Ignoring ICMP echo requests (pings) sent to broadcast or multicast addresses makes the system slightly more difficult to enumerate on the network.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_echo_ignore_broadcasts
Identifiers and References

References:  1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-7(a), CM-7(b), SC-5, DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, Req-1.4.3, SRG-OS-000480-GPOS-00227, 3.3.5


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.icmp_echo_ignore_broadcasts.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_icmp_echo_ignore_broadcasts

- name: Comment out any occurrences of net.ipv4.icmp_echo_ignore_broadcasts from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.icmp_echo_ignore_broadcasts
    replace: '#net.ipv4.icmp_echo_ignore_broadcasts'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_icmp_echo_ignore_broadcasts
- name: XCCDF Value sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value # promote to variable
  set_fact:
    sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.icmp_echo_ignore_broadcasts is set
  sysctl:
    name: net.ipv4.icmp_echo_ignore_broadcasts
    value: '{{ sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_icmp_echo_ignore_broadcasts

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.icmp_echo_ignore_broadcasts from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.icmp_echo_ignore_broadcasts.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.icmp_echo_ignore_broadcasts" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value='1'


#
# Set runtime for net.ipv4.icmp_echo_ignore_broadcasts
#
/sbin/sysctl -q -n -w net.ipv4.icmp_echo_ignore_broadcasts="$sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value"

#
# If net.ipv4.icmp_echo_ignore_broadcasts present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.icmp_echo_ignore_broadcasts = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.icmp_echo_ignore_broadcasts")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.icmp_echo_ignore_broadcasts\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.icmp_echo_ignore_broadcasts\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable Kernel Parameter to Ignore Bogus ICMP Error Responses on IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.icmp_ignore_bogus_error_responses kernel parameter, run the following command: 
$ sudo sysctl -w net.ipv4.icmp_ignore_bogus_error_responses=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
net.ipv4.icmp_ignore_bogus_error_responses = 1
Rationale:
Ignoring bogus ICMP error responses reduces log size, although some activity would not be logged.
Severity: 
unknown
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_icmp_ignore_bogus_error_responses
Identifiers and References

References:  BP28(R22), 1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, DSS06.06, 3.1.20, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.9.1.2, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-7(a), CM-7(b), SC-5, DE.CM-1, PR.DS-4, PR.IP-1, PR.PT-3, Req-1.4.3, SRG-OS-000480-GPOS-00227, 3.3.6


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.icmp_ignore_bogus_error_responses.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
  - unknown_severity

- name: Comment out any occurrences of net.ipv4.icmp_ignore_bogus_error_responses
    from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.icmp_ignore_bogus_error_responses
    replace: '#net.ipv4.icmp_ignore_bogus_error_responses'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
  - unknown_severity
- name: XCCDF Value sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value # promote to variable
  set_fact:
    sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.icmp_ignore_bogus_error_responses is set
  sysctl:
    name: net.ipv4.icmp_ignore_bogus_error_responses
    value: '{{ sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - PCI-DSS-Req-1.4.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - reboot_required
  - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
  - unknown_severity

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.icmp_ignore_bogus_error_responses from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.icmp_ignore_bogus_error_responses.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.icmp_ignore_bogus_error_responses" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value='1'


#
# Set runtime for net.ipv4.icmp_ignore_bogus_error_responses
#
/sbin/sysctl -q -n -w net.ipv4.icmp_ignore_bogus_error_responses="$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value"

#
# If net.ipv4.icmp_ignore_bogus_error_responses present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.icmp_ignore_bogus_error_responses = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.icmp_ignore_bogus_error_responses")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.icmp_ignore_bogus_error_responses\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.icmp_ignore_bogus_error_responses\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable Kernel Parameter to Use TCP Syncookies on Network Interfaces   [ref]

To set the runtime status of the net.ipv4.tcp_syncookies kernel parameter, run the following command: 
$ sudo sysctl -w net.ipv4.tcp_syncookies=1
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
net.ipv4.tcp_syncookies = 1
Rationale:
A TCP SYN flood attack can cause a denial of service by filling a system's TCP connection table with connections in the SYN_RCVD state. Syncookies can be used to track a connection when a subsequent ACK is received, verifying the initiator is attempting a valid connection and is not a flood source. This feature is activated when a flood condition is detected, and enables the system to continue servicing valid connection requests.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_tcp_syncookies
Identifiers and References

References:  BP28(R22), 1, 12, 13, 14, 15, 16, 18, 2, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.07, DSS06.02, 3.1.20, CCI-000366, CCI-001095, 4.2.3.4, 4.3.3.4, 4.4.3.3, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-7(a), CM-7(b), SC-5(1), SC-5(2), SC-5(3)(a), CM-6(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.PT-4, Req-1.4.1, SRG-OS-000480-GPOS-00227, SRG-OS-000420-GPOS-00186, SRG-OS-000142-GPOS-00071, UBTU-20-010412, 3.3.8


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.tcp_syncookies.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-UBTU-20-010412
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(1)
  - NIST-800-53-SC-5(2)
  - NIST-800-53-SC-5(3)(a)
  - PCI-DSS-Req-1.4.1
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_tcp_syncookies

- name: Comment out any occurrences of net.ipv4.tcp_syncookies from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.tcp_syncookies
    replace: '#net.ipv4.tcp_syncookies'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-UBTU-20-010412
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(1)
  - NIST-800-53-SC-5(2)
  - NIST-800-53-SC-5(3)(a)
  - PCI-DSS-Req-1.4.1
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_tcp_syncookies
- name: XCCDF Value sysctl_net_ipv4_tcp_syncookies_value # promote to variable
  set_fact:
    sysctl_net_ipv4_tcp_syncookies_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.tcp_syncookies is set
  sysctl:
    name: net.ipv4.tcp_syncookies
    value: '{{ sysctl_net_ipv4_tcp_syncookies_value }}'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - DISA-STIG-UBTU-20-010412
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5(1)
  - NIST-800-53-SC-5(2)
  - NIST-800-53-SC-5(3)(a)
  - PCI-DSS-Req-1.4.1
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_tcp_syncookies

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.tcp_syncookies from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.tcp_syncookies.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.tcp_syncookies" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"

sysctl_net_ipv4_tcp_syncookies_value='1'


#
# Set runtime for net.ipv4.tcp_syncookies
#
/sbin/sysctl -q -n -w net.ipv4.tcp_syncookies="$sysctl_net_ipv4_tcp_syncookies_value"

#
# If net.ipv4.tcp_syncookies present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.tcp_syncookies = value" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.tcp_syncookies")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "$sysctl_net_ipv4_tcp_syncookies_value"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.tcp_syncookies\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.tcp_syncookies\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Network Parameters for Hosts Only   Group contains 3 rules
[ref]   If the system is not going to be used as a router, then setting certain kernel parameters ensure that the host will not perform routing of network traffic.

Rule   Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.all.send_redirects kernel parameter, run the following command: 
$ sudo sysctl -w net.ipv4.conf.all.send_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
net.ipv4.conf.all.send_redirects = 0
Rationale:
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table possibly revealing portions of the network topology.
The ability to send ICMP redirects is only appropriate for systems acting as routers.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_all_send_redirects
Identifiers and References

References:  BP28(R22), 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-7(a), CM-7(b), SC-5, CM-6(a), SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, 1.4.2, SRG-OS-000480-GPOS-00227, 3.2.1


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.all.send_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_send_redirects

- name: Comment out any occurrences of net.ipv4.conf.all.send_redirects from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.all.send_redirects
    replace: '#net.ipv4.conf.all.send_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_send_redirects

- name: Ensure sysctl net.ipv4.conf.all.send_redirects is set to 0
  sysctl:
    name: net.ipv4.conf.all.send_redirects
    value: '0'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_all_send_redirects

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.all.send_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.all.send_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.all.send_redirects" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for net.ipv4.conf.all.send_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.send_redirects="0"

#
# If net.ipv4.conf.all.send_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.all.send_redirects = 0" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.all.send_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.all.send_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.all.send_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces by Default   [ref]

To set the runtime status of the net.ipv4.conf.default.send_redirects kernel parameter, run the following command: 
$ sudo sysctl -w net.ipv4.conf.default.send_redirects=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
net.ipv4.conf.default.send_redirects = 0
Rationale:
ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table possibly revealing portions of the network topology.
The ability to send ICMP redirects is only appropriate for systems acting as routers.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_conf_default_send_redirects
Identifiers and References

References:  BP28(R22), 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-7(a), CM-7(b), SC-5, CM-6(a), SC-7(a), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227, 3.2.1


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.conf.default.send_redirects.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_send_redirects

- name: Comment out any occurrences of net.ipv4.conf.default.send_redirects from config
    files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.conf.default.send_redirects
    replace: '#net.ipv4.conf.default.send_redirects'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_send_redirects

- name: Ensure sysctl net.ipv4.conf.default.send_redirects is set to 0
  sysctl:
    name: net.ipv4.conf.default.send_redirects
    value: '0'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.10.1.1
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_conf_default_send_redirects

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.conf.default.send_redirects from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.conf.default.send_redirects.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.conf.default.send_redirects" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for net.ipv4.conf.default.send_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.send_redirects="0"

#
# If net.ipv4.conf.default.send_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.default.send_redirects = 0" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.conf.default.send_redirects")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.conf.default.send_redirects\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.conf.default.send_redirects\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Kernel Parameter for IP Forwarding on IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.ip_forward kernel parameter, run the following command: 
$ sudo sysctl -w net.ipv4.ip_forward=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
net.ipv4.ip_forward = 0
Warning:  Certain technologies such as virtual machines, containers, etc. rely on IPv4 forwarding to enable and use networking. Disabling IPv4 forwarding would cause those technologies to stop working. Therefore, this rule should not be used in profiles or benchmarks that target usage of IPv4 forwarding.
Rationale:
Routing protocol daemons are typically used on routers to exchange network topology information with other routers. If this capability is used when not required, system network information may be unnecessarily transmitted across the network.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_net_ipv4_ip_forward
Identifiers and References

References:  BP28(R22), 1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, DSS06.06, 3.1.20, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.9.1.2, CIP-007-3 R4, CIP-007-3 R4.1, CIP-007-3 R4.2, CIP-007-3 R5.1, CM-7(a), CM-7(b), SC-5, CM-6(a), SC-7(a), DE.CM-1, PR.DS-4, PR.IP-1, PR.PT-3, PR.PT-4, Req-1.3.1, Req-1.3.2, 1.4.2, SRG-OS-000480-GPOS-00227, 3.2.2


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*net.ipv4.ip_forward.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_ip_forward

- name: Comment out any occurrences of net.ipv4.ip_forward from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*net.ipv4.ip_forward
    replace: '#net.ipv4.ip_forward'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_ip_forward

- name: Ensure sysctl net.ipv4.ip_forward is set to 0
  sysctl:
    name: net.ipv4.ip_forward
    value: '0'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.20
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-SC-5
  - NIST-800-53-SC-7(a)
  - PCI-DSS-Req-1.3.1
  - PCI-DSS-Req-1.3.2
  - PCI-DSSv4-1.4.2
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_net_ipv4_ip_forward

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of net.ipv4.ip_forward from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*net.ipv4.ip_forward.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "net.ipv4.ip_forward" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for net.ipv4.ip_forward
#
/sbin/sysctl -q -n -w net.ipv4.ip_forward="0"

#
# If net.ipv4.ip_forward present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.ip_forward = 0" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^net.ipv4.ip_forward")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^net.ipv4.ip_forward\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^net.ipv4.ip_forward\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   nftables   Group contains 9 rules
[ref]   If firewalld or iptables are being used in your environment, please follow the guidance in their respective section and pass-over the guidance in this section.

nftables is a subsystem of the Linux kernel providing filtering and classification of network packets/datagrams/frames and is the successor to iptables. The biggest change with the successor nftables is its simplicity. With iptables, we have to configure every single rule and use the syntax which can be compared with normal commands. With nftables, the simpler syntax, much like BPF (Berkely Packet Filter) means shorter lines and less repetition. Support for nftables should also be compiled into the kernel, together with the related nftables modules.

It is available in Linux kernels >= 3.13. Please ensure that your kernel supports nftables before choosing this option.

Rule   Install nftables Package   [ref]

nftables provides a new in-kernel packet classification framework that is based on a network-specific Virtual Machine (VM) and a new nft userspace command line tool. nftables reuses the existing Netfilter subsystems such as the existing hook infrastructure, the connection tracking system, NAT, userspace queuing and logging subsystem. The nftables package can be installed with the following command: 
$ apt-get install nftables
Rationale:
nftables is a subsystem of the Linux kernel that can protect against threats originating from within a corporate network to include malicious mobile code and poorly configured software on a host.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_nftables_installed
Identifiers and References

References:  3.5.2.1



[[packages]]
name = "nftables"
version = "*"

Complexity:low
Disruption:low
Strategy:enable
include install_nftables

class install_nftables {
  package { 'nftables':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure nftables is installed
  package:
    name: nftables
    state: present
  tags:
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_nftables_installed

Complexity:low
Disruption:low
Strategy:enable

DEBIAN_FRONTEND=noninteractive apt-get install -y "nftables"

Rule   Uninstall nftables package   [ref]

nftables is a subsystem of the Linux kernel providing filtering and classification of network packets/datagrams/frames and is the successor to iptables. The nftables package can be removed with the following command: 
$ apt-get remove nftables
Rationale:
Running both firewalld and nftables may lead to conflict.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_nftables_removed
Identifiers and References

References:  3.5.3.1.2


Complexity:low
Disruption:low
Strategy:disable
include remove_nftables

class remove_nftables {
  package { 'nftables':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure nftables is removed
  package:
    name: nftables
    state: absent
  tags:
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_nftables_removed

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove nftables
#	   from the system, and may remove any packages
#	   that depend on nftables. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "nftables"

Rule   Verify nftables Service is Enabled   [ref]

The nftables service allows for the loading of nftables rulesets during boot, or starting on the nftables service The nftables service can be enabled with the following command: 
$ sudo systemctl enable nftables.service
Rationale:
The nftables service restores the nftables rules from the rules files referenced in the /etc/sysconfig/nftables.conf file during boot or the starting of the nftables service
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_service_nftables_enabled
Identifiers and References

References:  3.5.2.9



[customizations.services]
enabled = ["nftables"]

Complexity:low
Disruption:low
Strategy:enable
include enable_nftables

class enable_nftables {
  service {'nftables':
    enable => true,
    ensure => 'running',
  }
}

Complexity:low
Disruption:low
Strategy:enable
- name: Enable service nftables
  block:

  - name: Gather the package facts
    package_facts:
      manager: auto

  - name: Enable service nftables
    systemd:
      name: nftables
      enabled: 'yes'
      state: started
      masked: 'no'
    when:
    - '"nftables" in ansible_facts.packages'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_nftables_enabled

Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'nftables.service'
"$SYSTEMCTL_EXEC" start 'nftables.service'
"$SYSTEMCTL_EXEC" enable 'nftables.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify nftables Service is Disabled   [ref]

nftables is a subsystem of the Linux kernel providing filtering and classification of network packets/datagrams/frames and is the successor to iptables. The nftables service can be disabled with the following command: 
systemctl disable nftables
Rationale:
Running both firewalld and nftables may lead to conflict. nftables is actually one of the backends for firewalld management tools.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_service_nftables_disabled
Identifiers and References

References:  3.5.3.1.2


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    systemd:
      units:
      - name: nftables.service
        enabled: false
        mask: true
      - name: nftables.socket
        enabled: false
        mask: true



[customizations.services]
disabled = ["nftables"]

Complexity:low
Disruption:low
Strategy:enable
include disable_nftables

class disable_nftables {
  service {'nftables':
    enable => false,
    ensure => 'stopped',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Block Disable service nftables
  block:

  - name: Disable service nftables
    block:

    - name: Disable service nftables
      systemd:
        name: nftables.service
        enabled: 'no'
        state: stopped
        masked: 'yes'
    rescue:

    - name: Intentionally ignored previous 'Disable service nftables' failure, service
        was already disabled
      meta: noop
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_nftables_disabled

- name: Unit Socket Exists - nftables.socket
  command: systemctl list-unit-files nftables.socket
  register: socket_file_exists
  changed_when: false
  failed_when: socket_file_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_nftables_disabled

- name: Disable socket nftables
  systemd:
    name: nftables.socket
    enabled: 'no'
    state: stopped
    masked: 'yes'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"nftables.socket" in socket_file_exists.stdout_lines[1]'
  tags:
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_nftables_disabled

Complexity:low
Disruption:low
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" stop 'nftables.service'
"$SYSTEMCTL_EXEC" disable 'nftables.service'
"$SYSTEMCTL_EXEC" mask 'nftables.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files nftables.socket; then
    "$SYSTEMCTL_EXEC" stop 'nftables.socket'
    "$SYSTEMCTL_EXEC" mask 'nftables.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'nftables.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure nftables Default Deny Firewall Policy   [ref]

Base chain policy is the default verdict that will be applied to packets reaching the end of the chain. There are two policies: accept (Default) and drop. If the policy is set to accept, the firewall will accept any packet that is not configured to be denied and the packet will continue traversing the network stack.
Warning:  Changing firewall settings while connected over network can result in being locked out of the system.
Rationale:
It is easier to allow acceptable usage than to block unacceptable usage.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_nftables_ensure_default_deny_policy
Identifiers and References

References:  3.5.2.8

Rule   Ensure nftables Rules are Permanent   [ref]

nftables is a subsystem of the Linux kernel providing filtering and classification of network packets/datagrams/frames. The nftables service reads the /etc/nftables.conf file for a nftables file or files to include in the nftables ruleset. A nftables ruleset containing the input, forward, and output base chains allow network traffic to be filtered.
Rationale:
Changes made to nftables ruleset only affect the live system, you will also need to configure the nftables ruleset to apply on boot
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_nftables_rules_permanent
Identifiers and References

References:  3.5.2.10

Rule   Ensure Base Chains Exist for Nftables   [ref]

Tables in nftables hold chains. Each table only has one address family and only applies to packets of this family. Tables can have one of six families. Chains are containers for rules. They exist in two kinds, base chains and regular chains. A base chain is an entry point for packets from the networking stack, a regular chain may be used as jump target and is used for better rule organization.
Warning:  Configuring rules over ssh, by creating a base chain with policy drop will cause loss of connectivity. Ensure that a rule allowing ssh has been added to the base chain prior to setting the base cahin's policy to drop
Rationale:
If a base chain doesn't exist with a hook for input, forward, and delete, packets that would flow through those chains will not be touched by nftables.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_set_nftables_base_chain
Identifiers and References

References:  3.5.2.5


Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_nftables_base_chain
- name: XCCDF Value var_nftables_table # promote to variable
  set_fact:
    var_nftables_table: !!str filter
  tags:
    - always
- name: XCCDF Value var_nftables_family # promote to variable
  set_fact:
    var_nftables_family: !!str inet
  tags:
    - always
- name: XCCDF Value var_nftables_base_chain_names # promote to variable
  set_fact:
    var_nftables_base_chain_names: !!str input,forward,output
  tags:
    - always
- name: XCCDF Value var_nftables_base_chain_types # promote to variable
  set_fact:
    var_nftables_base_chain_types: !!str filter,filter,filter
  tags:
    - always
- name: XCCDF Value var_nftables_base_chain_hooks # promote to variable
  set_fact:
    var_nftables_base_chain_hooks: !!str input,forward,output
  tags:
    - always
- name: XCCDF Value var_nftables_base_chain_priorities # promote to variable
  set_fact:
    var_nftables_base_chain_priorities: !!str 0,0,0
  tags:
    - always
- name: XCCDF Value var_nftables_base_chain_policies # promote to variable
  set_fact:
    var_nftables_base_chain_policies: !!str accept,accept,accept
  tags:
    - always

- name: Ensure Base Chains Exist for Nftables - Check Existence of Nftables Table
  ansible.builtin.shell: nft list tables | grep '{{ var_nftables_family }} {{ var_nftables_table
    }}'
  register: existing_nftables
  changed_when: false
  failed_when: false
  when: '"nftables" in ansible_facts.packages'
  tags:
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_nftables_base_chain

- name: Ensure Base Chains Exist for Nftables - Set NFTables Table
  ansible.builtin.command: nft create table {{ var_nftables_family }} {{ var_nftables_table
    }}
  when:
  - '"nftables" in ansible_facts.packages'
  - existing_nftables.rc > 0
  tags:
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_nftables_base_chain

- name: Ensure Base Chains Exist for Nftables - Add Base Chains
  ansible.builtin.command: nft 'add chain {{ var_nftables_family }} {{ var_nftables_table
    }} {{ item.0 }} { type {{ item.1 }} hook {{ item.2 }} priority {{ item.3 }} ;
    policy {{ item.4 }} ; }'
  with_together:
  - '{{ var_nftables_base_chain_names.split(",") }}'
  - '{{ var_nftables_base_chain_types.split(",") }}'
  - '{{ var_nftables_base_chain_hooks.split(",") }}'
  - '{{ var_nftables_base_chain_priorities.split(",") }}'
  - '{{ var_nftables_base_chain_policies.split(",") }}'
  when: '"nftables" in ansible_facts.packages'
  tags:
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_nftables_base_chain

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'nftables' 2>/dev/null | grep -q installed; then

#Name of the table
var_nftables_table='filter'

#Familiy of the table 
var_nftables_family='inet'

#Name(s) of base chain
var_nftables_base_chain_names='input,forward,output'

#Type(s) of base chain
var_nftables_base_chain_types='filter,filter,filter'

# Hooks for base chain
var_nftables_base_chain_hooks='input,forward,output'

#Priority
var_nftables_base_chain_priorities='0,0,0'

#Policy 
var_nftables_base_chain_policies='accept,accept,accept'


#Transfer some of strings to arrays
IFS="," read -r -a  names <<< "$var_nftables_base_chain_names"
IFS="," read -r -a  types <<< "$var_nftables_base_chain_types"
IFS="," read -r -a  hooks <<< "$var_nftables_base_chain_hooks"
IFS="," read -r -a  priorities <<< "$var_nftables_base_chain_priorities"
IFS="," read -r -a  policies <<< "$var_nftables_base_chain_policies"

my_cmd="nft list tables | grep '$var_nftables_family $var_nftables_table'"
eval IS_TABLE_EXIST=\$\($my_cmd\)
if [ -z "$IS_TABLE_EXIST" ]
then
  # We create a table and add chains to it 
  nft create table "$var_nftables_family" "$var_nftables_table"
  num_of_chains=${#names[@]}
  for ((i=0; i < num_of_chains; i++))
  do
   chain_to_add="add chain $var_nftables_family $var_nftables_table ${names[$i]} { type ${types[$i]} hook ${hooks[$i]} priority ${priorities[$i]} ; policy ${policies[$i]} ; }"
   my_cmd="nft '$chain_to_add'"
   eval $my_cmd
  done    
else
  # We add missing chains to the existing table
  num_of_chains=${#names[@]}
  for ((i=0; i < num_of_chains; i++))
  do
    IS_CHAIN_EXIST=$(nft list table "$var_nftables_family" "$var_nftables_table" | grep "hook ${hooks[$i]}")
    if [ -z "$IS_CHAIN_EXIST" ]
      then
        chain_to_add="add chain '$var_nftables_family' '$var_nftables_table' ${names[$i]} { type ${types[$i]} hook ${hooks[$i]} priority ${priorities[$i]} ; policy ${policies[$i]} ; }"
        my_cmd="nft '$chain_to_add'"
        eval $my_cmd
    fi
  done 
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set nftables Configuration for Loopback Traffic   [ref]

Configure the loopback interface to accept traffic. Configure all other interfaces to deny traffic to the loopback network.
Warning:  Changing firewall settings while connected over network can result in being locked out of the system. Keep in mind the remediation makes changes only to the running system, in order to keep the changes need to take care to save the nft settings to the relvant configutation files.
Rationale:
Loopback traffic is generated between processes on machine and is typically critical to operation of the system. The loopback interface is the only place that loopback network traffic should be seen, all other interfaces should ignore traffic on this network as an anti-spoofing measure.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_set_nftables_loopback_traffic
Identifiers and References

References:  Req-1.4.1, 3.5.2.6


- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - PCI-DSS-Req-1.4.1
  - medium_severity
  - set_nftables_loopback_traffic

- name: Implement Loopback Rules
  ansible.builtin.command: nft add rule inet filter input iif lo accept
  when: '"nftables" in ansible_facts.packages'
  tags:
  - PCI-DSS-Req-1.4.1
  - medium_severity
  - set_nftables_loopback_traffic

- name: Create Rule to Drop Input IP Address from Loopback
  ansible.builtin.command: nft insert rule inet filter input ip saddr 127.0.0.0/8
    counter drop
  when: '"nftables" in ansible_facts.packages'
  tags:
  - PCI-DSS-Req-1.4.1
  - medium_severity
  - set_nftables_loopback_traffic

- name: Check if IPv6 is Disabled in grub Configuration
  ansible.builtin.shell: |
    [ -z "$(grep "^\s*linux" /boot/grub2/grub.cfg | grep -v ipv6.disabled=1)" ]
  register: ipv6_status
  when: '"nftables" in ansible_facts.packages'
  tags:
  - PCI-DSS-Req-1.4.1
  - medium_severity
  - set_nftables_loopback_traffic

- name: Check sysctl value of net.ipv6.conf.all.disable_ipv6
  ansible.posix.sysctl:
    name: net.ipv6.conf.all.disable_ipv6
    state: present
    value: '1'
  check_mode: true
  register: sysctl_ipv6_all
  when: '"nftables" in ansible_facts.packages'
  tags:
  - PCI-DSS-Req-1.4.1
  - medium_severity
  - set_nftables_loopback_traffic

- name: Check sysctl value of net.ipv6.conf.default.disable_ipv6
  ansible.posix.sysctl:
    name: net.ipv6.conf.default.disable_ipv6
    state: present
    value: '1'
  check_mode: true
  register: sysctl_ipv6_default
  when: '"nftables" in ansible_facts.packages'
  tags:
  - PCI-DSS-Req-1.4.1
  - medium_severity
  - set_nftables_loopback_traffic

- name: Implement IPv6 loopback rules
  ansible.builtin.command: nft add rule inet filter input ip6 saddr ::1 counter drop
  when:
  - '"nftables" in ansible_facts.packages'
  - ipv6_status.rc == 0 or sysctl_ipv6_all.found > 0 or sysctl_ipv6_default.found
    > 0
  tags:
  - PCI-DSS-Req-1.4.1
  - medium_severity
  - set_nftables_loopback_traffic


# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'nftables' 2>/dev/null | grep -q installed; then

# Implement the loopback rules:
nft add rule inet filter input iif lo accept
nft insert rule inet filter input ip saddr 127.0.0.0/8 counter drop

# Check IPv6 is disabled, if false implement IPv6 loopback rules
[ -n "$passing" ] && passing=""
[ -z "$(grep "^\s*linux" /boot/grub2/grub.cfg | grep -v ipv6.disabled=1)" ] && passing="true"

grep -Eq "^\s*net\.ipv6\.conf\.all\.disable_ipv6\s*=\s*1\b(\s+#.*)?$" \
/etc/sysctl.conf /etc/sysctl.d/*.conf && \
grep -Eq "^\s*net\.ipv6\.conf\.default\.disable_ipv6\s*=\s*1\b(\s+#.*)?$" \
/etc/sysctl.conf /etc/sysctl.d/*.conf && sysctl net.ipv6.conf.all.disable_ipv6 | \
grep -Eq "^\s*net\.ipv6\.conf\.all\.disable_ipv6\s*=\s*1\b(\s+#.*)?$" && \
sysctl net.ipv6.conf.default.disable_ipv6 | \
grep -Eq "^\s*net\.ipv6\.conf\.default\.disable_ipv6\s*=\s*1\b(\s+#.*)?$" && passing="true"

# Is IPv6 Disabled? (true/false)
if [ "$passing" = false ] ; then
    nft add rule inet filter input ip6 saddr ::1 counter drop
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure a Table Exists for Nftables   [ref]

Tables in nftables hold chains. Each table only has one address family and only applies to packets of this family. Tables can have one of six families.
Warning:  Adding rules to a running nftables can cause loss of connectivity to the system.
Rationale:
Nftables doesn't have any default tables. Without a table being built, nftables will not filter network traffic. Note: adding rules to a running nftables can cause loss of connectivity to the system.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_set_nftables_table
Identifiers and References

References:  3.5.2.4


Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_nftables_table
- name: XCCDF Value var_nftables_family # promote to variable
  set_fact:
    var_nftables_family: !!str inet
  tags:
    - always
- name: XCCDF Value var_nftables_table # promote to variable
  set_fact:
    var_nftables_table: !!str filter
  tags:
    - always

- name: Collect Existing Nftables
  ansible.builtin.command: nft list tables
  register: existing_nftables
  when: '"nftables" in ansible_facts.packages'
  tags:
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_nftables_table

- name: Set Nftable Table
  ansible.builtin.command: nft create table {{ var_nftables_family }} {{ var_nftables_table
    }}
  when:
  - '"nftables" in ansible_facts.packages'
  - existing_nftables.stdout_lines | length == 0
  tags:
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - set_nftables_table


# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'nftables' 2>/dev/null | grep -q installed; then

#Set nftables family name
var_nftables_family='inet'


#Set nftables table name
var_nftables_table='filter'


IS_TABLE=$(nft list tables)
if [ -z "$IS_TABLE" ]
then
  nft create table "$var_nftables_family" "$var_nftables_table"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Uncomplicated Firewall (ufw)   Group contains 5 rules
[ref]   The Linux kernel in Ubuntu provides a packet filtering system called netfilter, and the traditional interface for manipulating netfilter are the iptables suite of commands. iptables provide a complete firewall solution that is both highly configurable and highly flexible. Becoming proficient in iptables takes time, and getting started with netfilter firewalling using only iptables can be a daunting task. As a result, many frontends for iptables have been created over the years, each trying to achieve a different result and targeting a different audience. The Uncomplicated Firewall (ufw) is a frontend for iptables and is particularly well-suited for host-based firewalls. ufw provides a framework for managing netfilter, as well as a command-line interface for manipulating the firewall. ufw aims to provide an easy to use interface for people unfamiliar with firewall concepts, while at the same time simplifies complicated iptables commands to help an administrator who knows what he or she is doing. ufw is an upstream for other distributions and graphical frontends.

Rule   Install ufw Package   [ref]

The ufw package can be installed with the following command: 
$ apt-get install ufw
Rationale:
ufw controls the Linux kernel network packet filtering code. ufw allows system operators to set up firewalls and IP masquerading, etc.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_ufw_installed
Identifiers and References

References:  CCI-002314, SRG-OS-000297-GPOS-00115, UBTU-20-010433, 3.5.1.1



[[packages]]
name = "ufw"
version = "*"

Complexity:low
Disruption:low
Strategy:enable
include install_ufw

class install_ufw {
  package { 'ufw':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure ufw is installed
  package:
    name: ufw
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - DISA-STIG-UBTU-20-010433
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_ufw_installed

Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

DEBIAN_FRONTEND=noninteractive apt-get install -y "ufw"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Remove ufw Package   [ref]

The ufw package can be removed with the following command: 
$ apt-get remove ufw
Rationale:
Running iptables.persistent with ufw enabled may lead to conflict and unexpected results.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_ufw_removed
Identifiers and References

References:  3.5.2.2


Complexity:low
Disruption:low
Strategy:disable
include remove_ufw

class remove_ufw {
  package { 'ufw':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure ufw is removed
  package:
    name: ufw
    state: absent
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_ufw_removed

Complexity:low
Disruption:low
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# CAUTION: This remediation script will remove ufw
#	   from the system, and may remove any packages
#	   that depend on ufw. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "ufw"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify ufw Enabled   [ref]

The ufw service can be enabled with the following command: 
$ sudo systemctl enable ufw.service
Rationale:
The ufw service must be enabled and running in order for ufw to protect the system
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_service_ufw_enabled
Identifiers and References

References:  CCI-002314, SRG-OS-000297-GPOS-00115, UBTU-20-010434, 3.5.1.3



[customizations.services]
enabled = ["ufw"]

Complexity:low
Disruption:low
Strategy:enable
include enable_ufw

class enable_ufw {
  service {'ufw':
    enable => true,
    ensure => 'running',
  }
}

Complexity:low
Disruption:low
Strategy:enable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - DISA-STIG-UBTU-20-010434
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_ufw_enabled

- name: Enable service ufw
  block:

  - name: Gather the package facts
    package_facts:
      manager: auto

  - name: Enable service ufw
    systemd:
      name: ufw
      enabled: 'yes'
      state: started
      masked: 'no'
    when:
    - '"ufw" in ansible_facts.packages'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "ufw" in ansible_facts.packages )
  tags:
  - DISA-STIG-UBTU-20-010434
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_ufw_enabled

Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && dpkg-query --show --showformat='${db:Status-Status}\n' 'ufw' 2>/dev/null | grep -q installed ); }; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'ufw.service'
"$SYSTEMCTL_EXEC" start 'ufw.service'
"$SYSTEMCTL_EXEC" enable 'ufw.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure ufw Default Deny Firewall Policy   [ref]

A default deny policy on connections ensures that any unconfigured network usage will be rejected. Note: Any port or protocol without a explicit allow before the default deny will be blocked.
Warning:  Changing firewall settings while connected over network can result in being locked out of the system.
Rationale:
With a default accept policy the firewall will accept any packet that is not configured to be denied. It is easier to allow acceptable usage than to block unacceptable usage.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_set_ufw_default_rule
Identifiers and References

References:  3.5.1.7

Rule   Set UFW Loopback Traffic   [ref]

Configure the loopback interface to accept traffic. Configure all other interfaces to deny traffic to the loopback network.
Warning:  Changing firewall settings while connected over network can result in being locked out of the system.
Rationale:
Loopback traffic is generated between processes on machine and is typically critical to operation of the system. The loopback interface is the only place that loopback network traffic should be seen, all other interfaces should ignore traffic on this network as an anti-spoofing measure.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_set_ufw_loopback_traffic
Identifiers and References

References:  3.5.1.4


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { dpkg-query --show --showformat='${db:Status-Status}\n' 'ufw' 2>/dev/null | grep -q installed; }; then

ufw allow in on lo
ufw allow out on lo
ufw deny in from 127.0.0.0/8
ufw deny in from ::1

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   File Permissions and Masks   Group contains 7 groups and 48 rules
[ref]   Traditional Unix security relies heavily on file and directory permissions to prevent unauthorized users from reading or modifying files to which they should not have access.

Several of the commands in this section search filesystems for files or directories with certain characteristics, and are intended to be run on every local partition on a given system. When the variable PART appears in one of the commands below, it means that the command is intended to be run repeatedly, with the name of each local partition substituted for PART in turn.

The following command prints a list of all xfs partitions on the local system, which is the default filesystem for Ubuntu 20.04 installations: 
$ mount -t xfs | awk '{print $3}'
For any systems that use a different local filesystem type, modify this command as appropriate.
Group   Verify Permissions on Important Files and Directories   Group contains 1 group and 29 rules
[ref]   Permissions for many files on a system must be set restrictively to ensure sensitive information is properly protected. This section discusses important permission restrictions which can be verified to ensure that no harmful discrepancies have arisen.
Group   Verify Permissions on Files with Local Account Information and Credentials   Group contains 24 rules

Rule   Verify Group Who Owns Backup group File   [ref]

To properly set the group owner of /etc/group-, run the command: 
$ sudo chgrp root /etc/group-
Rationale:
The /etc/group- file is a backup file of /etc/group, and as such, it contains information regarding groups that are configured on the system. Protection of this file is important for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_group
Identifiers and References

References:  CCI-002223, AC-6 (1), Req-8.7, 7.2.6, SRG-OS-000480-GPOS-00227, 6.1.8


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/group-
  stat:
    path: /etc/group-
  register: file_exists
  tags:
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_groupowner_backup_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/group-
  file:
    path: /etc/group-
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_groupowner_backup_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
chgrp 0 /etc/group-

Rule   Verify Group Who Owns Backup gshadow File   [ref]

To properly set the group owner of /etc/gshadow-, run the command: 
$ sudo chgrp shadow /etc/gshadow-
Rationale:
The /etc/gshadow- file is a backup of /etc/gshadow, and as such, it contains group password hashes. Protection of this file is critical for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_gshadow
Identifiers and References

References:  CCI-002223, AC-6 (1), Req-8.7, 7.2.6, SRG-OS-000480-GPOS-00227, 6.1.3


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/gshadow-
  stat:
    path: /etc/gshadow-
  register: file_exists
  tags:
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_groupowner_backup_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 42 on /etc/gshadow-
  file:
    path: /etc/gshadow-
    group: '42'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_groupowner_backup_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
chgrp 42 /etc/gshadow-

Rule   Verify Group Who Owns Backup passwd File   [ref]

To properly set the group owner of /etc/passwd-, run the command: 
$ sudo chgrp root /etc/passwd-
Rationale:
The /etc/passwd- file is a backup file of /etc/passwd, and as such, it contains information about the users that are configured on the system. Protection of this file is critical for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_passwd
Identifiers and References

References:  CCI-002223, AC-6 (1), Req-8.7, 7.2.6, SRG-OS-000480-GPOS-00227, 6.1.6


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/passwd-
  stat:
    path: /etc/passwd-
  register: file_exists
  tags:
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_groupowner_backup_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/passwd-
  file:
    path: /etc/passwd-
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_groupowner_backup_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
chgrp 0 /etc/passwd-

Rule   Verify User Who Owns Backup shadow File   [ref]

To properly set the group owner of /etc/shadow-, run the command: 
$ sudo chgrp shadow /etc/shadow-
Rationale:
The /etc/shadow- file is a backup file of /etc/shadow, and as such, it contains the list of local system accounts and password hashes. Protection of this file is critical for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_backup_etc_shadow
Identifiers and References

References:  Req-8.7, 7.2.6, SRG-OS-000480-GPOS-00227, 6.1.7


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/shadow-
  stat:
    path: /etc/shadow-
  register: file_exists
  tags:
  - PCI-DSS-Req-8.7
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_groupowner_backup_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 42 on /etc/shadow-
  file:
    path: /etc/shadow-
    group: '42'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - PCI-DSS-Req-8.7
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_groupowner_backup_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
chgrp 42 /etc/shadow-

Rule   Verify Group Who Owns group File   [ref]

To properly set the group owner of /etc/group, run the command: 
$ sudo chgrp root /etc/group
Rationale:
The /etc/group file contains information regarding groups that are configured on the system. Protection of this file is important for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_etc_group
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, 6.1.5


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/group
  stat:
    path: /etc/group
  register: file_exists
  tags:
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_groupowner_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/group
  file:
    path: /etc/group
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_groupowner_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
chgrp 0 /etc/group

Rule   Verify Group Who Owns gshadow File   [ref]

To properly set the group owner of /etc/gshadow, run the command: 
$ sudo chgrp shadow /etc/gshadow
Rationale:
The /etc/gshadow file contains group password hashes. Protection of this file is critical for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_etc_gshadow
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 6.1.9


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/gshadow
  stat:
    path: /etc/gshadow
  register: file_exists
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_groupowner_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 42 on /etc/gshadow
  file:
    path: /etc/gshadow
    group: '42'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_groupowner_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
chgrp 42 /etc/gshadow

Rule   Verify Group Who Owns passwd File   [ref]

To properly set the group owner of /etc/passwd, run the command: 
$ sudo chgrp root /etc/passwd
Rationale:
The /etc/passwd file contains information about the users that are configured on the system. Protection of this file is critical for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_etc_passwd
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, 6.1.2


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/passwd
  stat:
    path: /etc/passwd
  register: file_exists
  tags:
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_groupowner_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/passwd
  file:
    path: /etc/passwd
    group: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_groupowner_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
chgrp 0 /etc/passwd

Rule   Verify Group Who Owns shadow File   [ref]

To properly set the group owner of /etc/shadow, run the command: 
$ sudo chgrp shadow /etc/shadow
Rationale:
The /etc/shadow file stores password hashes. Protection of this file is critical for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_etc_shadow
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, 6.1.4


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/shadow
  stat:
    path: /etc/shadow
  register: file_exists
  tags:
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_groupowner_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 42 on /etc/shadow
  file:
    path: /etc/shadow
    group: '42'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_groupowner_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
chgrp 42 /etc/shadow

Rule   Verify User Who Owns Backup group File   [ref]

To properly set the owner of /etc/group-, run the command: 
$ sudo chown root /etc/group-
Rationale:
The /etc/group- file is a backup file of /etc/group, and as such, it contains information regarding groups that are configured on the system. Protection of this file is important for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_backup_etc_group
Identifiers and References

References:  CCI-002223, AC-6 (1), Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, 6.1.8


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/group-
  stat:
    path: /etc/group-
  register: file_exists
  tags:
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_owner_backup_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/group-
  file:
    path: /etc/group-
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_owner_backup_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
chown 0 /etc/group-

Rule   Verify User Who Owns Backup gshadow File   [ref]

To properly set the owner of /etc/gshadow-, run the command: 
$ sudo chown root /etc/gshadow-
Rationale:
The /etc/gshadow- file is a backup of /etc/gshadow, and as such, it contains group password hashes. Protection of this file is critical for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_backup_etc_gshadow
Identifiers and References

References:  CCI-002223, AC-6 (1), Req-8.7, 7.2.6, SRG-OS-000480-GPOS-00227, 6.1.3


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/gshadow-
  stat:
    path: /etc/gshadow-
  register: file_exists
  tags:
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_owner_backup_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/gshadow-
  file:
    path: /etc/gshadow-
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_owner_backup_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
chown 0 /etc/gshadow-

Rule   Verify User Who Owns Backup passwd File   [ref]

To properly set the owner of /etc/passwd-, run the command: 
$ sudo chown root /etc/passwd-
Rationale:
The /etc/passwd- file is a backup file of /etc/passwd, and as such, it contains information about the users that are configured on the system. Protection of this file is critical for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_backup_etc_passwd
Identifiers and References

References:  CCI-002223, AC-6 (1), Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, 6.1.6


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/passwd-
  stat:
    path: /etc/passwd-
  register: file_exists
  tags:
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_owner_backup_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/passwd-
  file:
    path: /etc/passwd-
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_owner_backup_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
chown 0 /etc/passwd-

Rule   Verify Group Who Owns Backup shadow File   [ref]

To properly set the owner of /etc/shadow-, run the command: 
$ sudo chown root /etc/shadow-
Rationale:
The /etc/shadow- file is a backup file of /etc/shadow, and as such, it contains the list of local system accounts and password hashes. Protection of this file is critical for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_backup_etc_shadow
Identifiers and References

References:  CCI-002223, AC-6 (1), Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, 6.1.7


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/shadow-
  stat:
    path: /etc/shadow-
  register: file_exists
  tags:
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_owner_backup_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/shadow-
  file:
    path: /etc/shadow-
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_owner_backup_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
chown 0 /etc/shadow-

Rule   Verify User Who Owns group File   [ref]

To properly set the owner of /etc/group, run the command: 
$ sudo chown root /etc/group
Rationale:
The /etc/group file contains information regarding groups that are configured on the system. Protection of this file is important for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_etc_group
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, 6.1.5


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/group
  stat:
    path: /etc/group
  register: file_exists
  tags:
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_owner_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/group
  file:
    path: /etc/group
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_owner_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
chown 0 /etc/group

Rule   Verify User Who Owns gshadow File   [ref]

To properly set the owner of /etc/gshadow, run the command: 
$ sudo chown root /etc/gshadow
Rationale:
The /etc/gshadow file contains group password hashes. Protection of this file is critical for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_etc_gshadow
Identifiers and References

References:  BP28(R36), 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 6.1.9


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/gshadow
  stat:
    path: /etc/gshadow
  register: file_exists
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_owner_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/gshadow
  file:
    path: /etc/gshadow
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_owner_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
chown 0 /etc/gshadow

Rule   Verify User Who Owns passwd File   [ref]

To properly set the owner of /etc/passwd, run the command: 
$ sudo chown root /etc/passwd
Rationale:
The /etc/passwd file contains information about the users that are configured on the system. Protection of this file is critical for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_etc_passwd
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, 6.1.2


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/passwd
  stat:
    path: /etc/passwd
  register: file_exists
  tags:
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_owner_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/passwd
  file:
    path: /etc/passwd
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_owner_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
chown 0 /etc/passwd

Rule   Verify User Who Owns shadow File   [ref]

To properly set the owner of /etc/shadow, run the command: 
$ sudo chown root /etc/shadow
Rationale:
The /etc/shadow file contains the list of local system accounts and stores password hashes. Protection of this file is critical for system security. Failure to give ownership of this file to root provides the designated owner with access to sensitive information which could weaken the system security posture.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_etc_shadow
Identifiers and References

References:  BP28(R36), 12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, 6.1.4


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/shadow
  stat:
    path: /etc/shadow
  register: file_exists
  tags:
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_owner_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/shadow
  file:
    path: /etc/shadow
    owner: '0'
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_owner_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
chown 0 /etc/shadow

Rule   Verify Permissions on Backup group File   [ref]

To properly set the permissions of /etc/group-, run the command: 
$ sudo chmod 0644 /etc/group-
Rationale:
The /etc/group- file is a backup file of /etc/group, and as such, it contains information regarding groups that are configured on the system. Protection of this file is important for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_backup_etc_group
Identifiers and References

References:  CCI-002223, AC-6 (1), Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, 6.1.8


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/group-
  stat:
    path: /etc/group-
  register: file_exists
  tags:
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_permissions_backup_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwt on /etc/group-
  file:
    path: /etc/group-
    mode: u-xs,g-xws,o-xwt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_permissions_backup_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure





chmod u-xs,g-xws,o-xwt /etc/group-

Rule   Verify Permissions on Backup gshadow File   [ref]

To properly set the permissions of /etc/gshadow-, run the command: 
$ sudo chmod 0640 /etc/gshadow-
Rationale:
The /etc/gshadow- file is a backup of /etc/gshadow, and as such, it contains group password hashes. Protection of this file is critical for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_backup_etc_gshadow
Identifiers and References

References:  CCI-002223, AC-6 (1), SRG-OS-000480-GPOS-00227, 6.1.3


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/gshadow-
  stat:
    path: /etc/gshadow-
  register: file_exists
  tags:
  - NIST-800-53-AC-6 (1)
  - configure_strategy
  - file_permissions_backup_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwrt on /etc/gshadow-
  file:
    path: /etc/gshadow-
    mode: u-xs,g-xws,o-xwrt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-6 (1)
  - configure_strategy
  - file_permissions_backup_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure





chmod u-xs,g-xws,o-xwrt /etc/gshadow-

Rule   Verify Permissions on Backup passwd File   [ref]

To properly set the permissions of /etc/passwd-, run the command: 
$ sudo chmod 0644 /etc/passwd-
Rationale:
The /etc/passwd- file is a backup file of /etc/passwd, and as such, it contains information about the users that are configured on the system. Protection of this file is critical for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_backup_etc_passwd
Identifiers and References

References:  CCI-002223, AC-6 (1), Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, 6.1.6


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/passwd-
  stat:
    path: /etc/passwd-
  register: file_exists
  tags:
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_permissions_backup_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwt on /etc/passwd-
  file:
    path: /etc/passwd-
    mode: u-xs,g-xws,o-xwt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_permissions_backup_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure





chmod u-xs,g-xws,o-xwt /etc/passwd-

Rule   Verify Permissions on Backup shadow File   [ref]

To properly set the permissions of /etc/shadow-, run the command: 
$ sudo chmod 0640 /etc/shadow-
Rationale:
The /etc/shadow- file is a backup file of /etc/shadow, and as such, it contains the list of local system accounts and password hashes. Protection of this file is critical for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_backup_etc_shadow
Identifiers and References

References:  CCI-002223, AC-6 (1), Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, 6.1.7


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/shadow-
  stat:
    path: /etc/shadow-
  register: file_exists
  tags:
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_permissions_backup_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwrt on /etc/shadow-
  file:
    path: /etc/shadow-
    mode: u-xs,g-xws,o-xwrt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-6 (1)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_permissions_backup_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure





chmod u-xs,g-xws,o-xwrt /etc/shadow-

Rule   Verify Permissions on group File   [ref]

To properly set the permissions of /etc/passwd, run the command: 
$ sudo chmod 0644 /etc/passwd
Rationale:
The /etc/group file contains information regarding groups that are configured on the system. Protection of this file is important for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_etc_group
Identifiers and References

References:  BP28(R36), 12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, 6.1.5


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/group
  stat:
    path: /etc/group
  register: file_exists
  tags:
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_permissions_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwt on /etc/group
  file:
    path: /etc/group
    mode: u-xs,g-xws,o-xwt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_permissions_etc_group
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure





chmod u-xs,g-xws,o-xwt /etc/group

Rule   Verify Permissions on gshadow File   [ref]

To properly set the permissions of /etc/gshadow, run the command: 
$ sudo chmod 0640 /etc/gshadow
Rationale:
The /etc/gshadow file contains group password hashes. Protection of this file is critical for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_etc_gshadow
Identifiers and References

References:  BP28(R36), 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 6.1.9


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/gshadow
  stat:
    path: /etc/gshadow
  register: file_exists
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwrt on /etc/gshadow
  file:
    path: /etc/gshadow
    mode: u-xs,g-xws,o-xwrt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_permissions_etc_gshadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure





chmod u-xs,g-xws,o-xwrt /etc/gshadow

Rule   Verify Permissions on passwd File   [ref]

To properly set the permissions of /etc/passwd, run the command: 
$ sudo chmod 0644 /etc/passwd
Rationale:
If the /etc/passwd file is writable by a group-owner or the world the risk of its compromise is increased. The file contains the list of accounts on the system and associated information, and protection of this file is critical for system security.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_etc_passwd
Identifiers and References

References:  BP28(R36), 12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, 6.1.2


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/passwd
  stat:
    path: /etc/passwd
  register: file_exists
  tags:
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_permissions_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwt on /etc/passwd
  file:
    path: /etc/passwd
    mode: u-xs,g-xws,o-xwt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_permissions_etc_passwd
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure





chmod u-xs,g-xws,o-xwt /etc/passwd

Rule   Verify Permissions on shadow File   [ref]

To properly set the permissions of /etc/shadow, run the command: 
$ sudo chmod 0640 /etc/shadow
Rationale:
The /etc/shadow file contains the list of local system accounts and stores password hashes. Protection of this file is critical for system security. Failure to give ownership of this file to root provides the designated owner with access to sensitive information which could weaken the system security posture.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_etc_shadow
Identifiers and References

References:  BP28(R36), 12, 13, 14, 15, 16, 18, 3, 5, 5.5.2.2, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-002223, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-8.7.c, 7.2.6, SRG-OS-000480-GPOS-00227, 6.1.4


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/shadow
  stat:
    path: /etc/shadow
  register: file_exists
  tags:
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_permissions_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwrt on /etc/shadow
  file:
    path: /etc/shadow
    mode: u-xs,g-xws,o-xwrt
  when: file_exists.stat is defined and file_exists.stat.exists
  tags:
  - CJIS-5.5.2.2
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-8.7.c
  - PCI-DSSv4-7.2.6
  - configure_strategy
  - file_permissions_etc_shadow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure





chmod u-xs,g-xws,o-xwrt /etc/shadow

Rule   Verify that All World-Writable Directories Have Sticky Bits Set   [ref]

When the so-called 'sticky bit' is set on a directory, only the owner of a given file may remove that file from the directory. Without the sticky bit, any user with write access to a directory may remove any file in the directory. Setting the sticky bit prevents users from removing each other's files. In cases where there is no reason for a directory to be world-writable, a better solution is to remove that permission rather than to set the sticky bit. However, if a directory is used by a particular application, consult that application's documentation instead of blindly changing modes.
To set the sticky bit on a world-writable directory DIR, run the following command: 
$ sudo chmod +t DIR
Rationale:
Failing to set the sticky bit on public directories allows unauthorized users to delete files in the directory structure.

The only authorized public directories are those temporary directories supplied with the system, or those designed to be temporary file repositories. The setting is normally reserved for directories used by the system, by users for temporary file storage (such as /tmp), and for directories requiring global read/write access.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_dir_perms_world_writable_sticky_bits
Identifiers and References

References:  BP28(R40), 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-001090, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000138-GPOS-00069, UBTU-20-010411, 1.1.22


df --local -P | awk '{if (NR!=1) print $6}' \
| xargs -I '$6' find '$6' -xdev -type d \
\( -perm -0002 -a ! -perm -1000 \) 2>/dev/null \
-exec chmod a+t {} +

Rule   Ensure No World-Writable Files Exist   [ref]

It is generally a good idea to remove global (other) write access to a file when it is discovered. However, check with documentation for specific applications before making changes. Also, monitor for recurring world-writable files, as these may be symptoms of a misconfigured application or user account. Finally, this applies to real files and not virtual files that are a part of pseudo file systems such as sysfs or procfs.
Rationale:
Data in world-writable files can be modified by any user on the system. In almost all circumstances, files can be configured using a combination of user and group permissions to support whatever legitimate access is needed without the risk caused by world-writable files.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_unauthorized_world_writable
Identifiers and References

References:  BP28(R40), 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, 2.2.6, 6.1.10



find / -xdev -type f -perm -002 -exec chmod o-w {} \;

Rule   Ensure All Files Are Owned by a Group   [ref]

If any files are not owned by a group, then the cause of their lack of group-ownership should be investigated. Following this, the files should be deleted or assigned to an appropriate group. The following command will discover and print any files on local partitions which do not belong to a valid group: 
$ df --local -P | awk '{if (NR!=1) print $6}' | sudo xargs -I '{}' find '{}' -xdev -nogroup
To search all filesystems on a system including network mounted filesystems the following command can be run manually for each partition: 
$ sudo find PARTITION -xdev -nogroup
Warning:  This rule only considers local groups. If you have your groups defined outside /etc/group, the rule won't consider those.
Rationale:
Unowned files do not directly imply a security problem, but they are generally a sign that something is amiss. They may be caused by an intruder, by incorrect software installation or draft software removal, or by failure to remove all files belonging to a deleted account. The files should be repaired so they will not cause problems when accounts are created in the future, and the cause should be discovered and addressed.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_ungroupowned
Identifiers and References

References:  BP28(R55), 1, 11, 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.02, DSS06.03, DSS06.06, DSS06.10, CCI-000366, CCI-002165, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.18.1.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.DS-5, PR.PT-3, 2.2.6, SRG-OS-000480-GPOS-00227, 6.1.12

Rule   Ensure All Files Are Owned by a User   [ref]

If any files are not owned by a user, then the cause of their lack of ownership should be investigated. Following this, the files should be deleted or assigned to an appropriate user. The following command will discover and print any files on local partitions which do not belong to a valid user: 
$ df --local -P | awk {'if (NR!=1) print $6'} | sudo xargs -I '{}' find '{}' -xdev -nouser
To search all filesystems on a system including network mounted filesystems the following command can be run manually for each partition: 
$ sudo find PARTITION -xdev -nouser
Warning:  For this rule to evaluate centralized user accounts, getent must be working properly so that running the command 
getent passwd
returns a list of all users in your organization. If using the System Security Services Daemon (SSSD), 
enumerate = true
must be configured in your organization's domain to return a complete list of users
Warning:  Enabling this rule will result in slower scan times depending on the size of your organization and number of centralized users.
Rationale:
Unowned files do not directly imply a security problem, but they are generally a sign that something is amiss. They may be caused by an intruder, by incorrect software installation or draft software removal, or by failure to remove all files belonging to a deleted account. The files should be repaired so they will not cause problems when accounts are created in the future, and the cause should be discovered and addressed.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_no_files_unowned_by_user
Identifiers and References

References:  BP28(R55), 11, 12, 13, 14, 15, 16, 18, 3, 5, 9, APO01.06, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.03, DSS06.06, CCI-000366, CCI-002165, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 5.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.AC-6, PR.DS-5, PR.IP-1, PR.PT-3, 2.2.6, SRG-OS-000480-GPOS-00227, 6.1.11

Rule   Verify permissions of log files   [ref]

Any operating system providing too much information in error messages risks compromising the data and security of the structure, and content of error messages needs to be carefully considered by the organization. Organizations carefully consider the structure/content of error messages. The extent to which information systems are able to identify and handle error conditions is guided by organizational policy and operational requirements. Information that could be exploited by adversaries includes, for example, erroneous logon attempts with passwords entered by mistake as the username, mission/business information that can be derived from (if not stated explicitly by) information recorded, and personal information, such as account numbers, social security numbers, and credit card numbers.
Rationale:
The Ubuntu 20.04 must generate error messages that provide information necessary for corrective actions without revealing information that could be exploited by adversaries.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_permissions_local_var_log
Identifiers and References

References:  CCI-001312, SI-11(a), SI-11(b), SI-11.1(iii), PR.AC-4, PR.DS-5, SRG-OS-000205-GPOS-00083, UBTU-20-010416, 4.2.3


Complexity:low
Disruption:low
Strategy:configure
- name: Find /var/log/ file(s)
  command: find -H /var/log/ -maxdepth 1 -perm /u+xs,g+xws,o+xwrt  -type f -regex
    ".*"
  register: files_found
  changed_when: false
  failed_when: false
  check_mode: false
  tags:
  - DISA-STIG-UBTU-20-010416
  - NIST-800-53-SI-11(a)
  - NIST-800-53-SI-11(b)
  - NIST-800-53-SI-11.1(iii)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - permissions_local_var_log

- name: Set permissions for /var/log/ file(s)
  file:
    path: '{{ item }}'
    mode: u-xs,g-xws,o-xwrt
    state: file
  with_items:
  - '{{ files_found.stdout_lines }}'
  tags:
  - DISA-STIG-UBTU-20-010416
  - NIST-800-53-SI-11(a)
  - NIST-800-53-SI-11(b)
  - NIST-800-53-SI-11.1(iii)
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - permissions_local_var_log



readarray -t files < <(find /var/log/)
for file in "${files[@]}"; do
    if basename $file | grep -qE '^.*$'; then
        chmod 0640 $file
    fi
done

if grep -qE "^f \/var\/log\/(btmp|wtmp|lastlog)? " /usr/lib/tmpfiles.d/var.conf; then
    sed -i --follow-symlinks "s/\(^f[[:space:]]\+\/var\/log\/btmp[[:space:]]\+\)\(\([[:digit:]]\+\)[^ $]*\)/\10640/" /usr/lib/tmpfiles.d/var.conf
    sed -i --follow-symlinks "s/\(^f[[:space:]]\+\/var\/log\/wtmp[[:space:]]\+\)\(\([[:digit:]]\+\)[^ $]*\)/\10640/" /usr/lib/tmpfiles.d/var.conf
    sed -i --follow-symlinks "s/\(^f[[:space:]]\+\/var\/log\/lastlog[[:space:]]\+\)\(\([[:digit:]]\+\)[^ $]*\)/\10640/" /usr/lib/tmpfiles.d/var.conf
fi
Group   Restrict Dynamic Mounting and Unmounting of Filesystems   Group contains 6 rules
[ref]   Linux includes a number of facilities for the automated addition and removal of filesystems on a running system. These facilities may be necessary in many environments, but this capability also carries some risk -- whether direct risk from allowing users to introduce arbitrary filesystems, or risk that software flaws in the automated mount facility itself could allow an attacker to compromise the system.

This command can be used to list the types of filesystems that are available to the currently executing kernel: 
$ find /lib/modules/`uname -r`/kernel/fs -type f -name '*.ko'
If these filesystems are not required then they can be explicitly disabled in a configuratio file in /etc/modprobe.d.

Rule   Disable Mounting of cramfs   [ref]

To configure the system to prevent the cramfs kernel module from being loaded, add the following line to the file /etc/modprobe.d/cramfs.conf: 
install cramfs /bin/true
This effectively prevents usage of this uncommon filesystem. The cramfs filesystem type is a compressed read-only Linux filesystem embedded in small footprint systems. A cramfs image can be used without having to first decompress the image.
Rationale:
Removing support for unneeded filesystem types reduces the local attack surface of the server.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_kernel_module_cramfs_disabled
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.4.6, CCI-000381, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, SRG-OS-000095-GPOS-00049, 1.1.1.1


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'cramfs' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/cramfs.conf
    regexp: install\s+cramfs
    line: install cramfs /bin/true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - kernel_module_cramfs_disabled
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install cramfs" /etc/modprobe.d/cramfs.conf ; then
	
	sed -i 's#^install cramfs.*#install cramfs /bin/true#g' /etc/modprobe.d/cramfs.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/cramfs.conf
	echo "install cramfs /bin/true" >> /etc/modprobe.d/cramfs.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Mounting of freevxfs   [ref]

To configure the system to prevent the freevxfs kernel module from being loaded, add the following line to the file /etc/modprobe.d/freevxfs.conf: 
install freevxfs /bin/true
This effectively prevents usage of this uncommon filesystem.
Rationale:
Linux kernel modules which implement filesystems that are not needed by the local system should be disabled.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_kernel_module_freevxfs_disabled
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.4.6, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 1.1.1.2


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'freevxfs' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/freevxfs.conf
    regexp: install\s+freevxfs
    line: install freevxfs /bin/true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - kernel_module_freevxfs_disabled
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install freevxfs" /etc/modprobe.d/freevxfs.conf ; then
	
	sed -i 's#^install freevxfs.*#install freevxfs /bin/true#g' /etc/modprobe.d/freevxfs.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/freevxfs.conf
	echo "install freevxfs /bin/true" >> /etc/modprobe.d/freevxfs.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Mounting of hfs   [ref]

To configure the system to prevent the hfs kernel module from being loaded, add the following line to the file /etc/modprobe.d/hfs.conf: 
install hfs /bin/true
This effectively prevents usage of this uncommon filesystem.
Rationale:
Linux kernel modules which implement filesystems that are not needed by the local system should be disabled.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_kernel_module_hfs_disabled
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.4.6, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 1.1.1.4


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'hfs' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/hfs.conf
    regexp: install\s+hfs
    line: install hfs /bin/true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - kernel_module_hfs_disabled
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install hfs" /etc/modprobe.d/hfs.conf ; then
	
	sed -i 's#^install hfs.*#install hfs /bin/true#g' /etc/modprobe.d/hfs.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/hfs.conf
	echo "install hfs /bin/true" >> /etc/modprobe.d/hfs.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Mounting of hfsplus   [ref]

To configure the system to prevent the hfsplus kernel module from being loaded, add the following line to the file /etc/modprobe.d/hfsplus.conf: 
install hfsplus /bin/true
This effectively prevents usage of this uncommon filesystem.
Rationale:
Linux kernel modules which implement filesystems that are not needed by the local system should be disabled.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_kernel_module_hfsplus_disabled
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.4.6, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 1.1.1.5


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'hfsplus' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/hfsplus.conf
    regexp: install\s+hfsplus
    line: install hfsplus /bin/true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - kernel_module_hfsplus_disabled
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install hfsplus" /etc/modprobe.d/hfsplus.conf ; then
	
	sed -i 's#^install hfsplus.*#install hfsplus /bin/true#g' /etc/modprobe.d/hfsplus.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/hfsplus.conf
	echo "install hfsplus /bin/true" >> /etc/modprobe.d/hfsplus.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Mounting of jffs2   [ref]

To configure the system to prevent the jffs2 kernel module from being loaded, add the following line to the file /etc/modprobe.d/jffs2.conf: 
install jffs2 /bin/true
This effectively prevents usage of this uncommon filesystem.
Rationale:
Linux kernel modules which implement filesystems that are not needed by the local system should be disabled.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_kernel_module_jffs2_disabled
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.4.6, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 1.1.1.3


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'jffs2' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/jffs2.conf
    regexp: install\s+jffs2
    line: install jffs2 /bin/true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - kernel_module_jffs2_disabled
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install jffs2" /etc/modprobe.d/jffs2.conf ; then
	
	sed -i 's#^install jffs2.*#install jffs2 /bin/true#g' /etc/modprobe.d/jffs2.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/jffs2.conf
	echo "install jffs2 /bin/true" >> /etc/modprobe.d/jffs2.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Mounting of udf   [ref]

To configure the system to prevent the udf kernel module from being loaded, add the following line to the file /etc/modprobe.d/udf.conf: 
install udf /bin/true
This effectively prevents usage of this uncommon filesystem. The udf filesystem type is the universal disk format used to implement the ISO/IEC 13346 and ECMA-167 specifications. This is an open vendor filesystem type for data storage on a broad range of media. This filesystem type is neccessary to support writing DVDs and newer optical disc formats.
Rationale:
Removing support for unneeded filesystem types reduces the local attack surface of the system.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_kernel_module_udf_disabled
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.4.6, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 1.1.1.6


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'udf' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/udf.conf
    regexp: install\s+udf
    line: install udf /bin/true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.4.6
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - kernel_module_udf_disabled
  - low_complexity
  - low_severity
  - medium_disruption
  - reboot_required

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if LC_ALL=C grep -q -m 1 "^install udf" /etc/modprobe.d/udf.conf ; then
	
	sed -i 's#^install udf.*#install udf /bin/true#g' /etc/modprobe.d/udf.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/udf.conf
	echo "install udf /bin/true" >> /etc/modprobe.d/udf.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Restrict Partition Mount Options   Group contains 10 rules
[ref]   System partitions can be mounted with certain options that limit what files on those partitions can do. These options are set in the /etc/fstab configuration file, and can be used to make certain types of malicious behavior more difficult.

Rule   Add nodev Option to /dev/shm   [ref]

The nodev mount option can be used to prevent creation of device files in /dev/shm. Legitimate character and block devices should not exist within temporary directories like /dev/shm. Add the nodev option to the fourth column of /etc/fstab for the line which controls mounting of /dev/shm.
Rationale:
The only legitimate location for device files is the /dev directory located on the root partition. The only exception to this is chroot jails.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_mount_option_dev_shm_nodev
Identifiers and References

References:  11, 13, 14, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS05.06, DSS06.06, CCI-001764, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, 1.1.7


Complexity:low
Disruption:high
Strategy:configure
- name: 'Add nodev Option to /dev/shm: Check information associated to mountpoint'
  command: findmnt  '/dev/shm'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /dev/shm: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /dev/shm: If /dev/shm not mounted, craft mount_info manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /dev/shm
    - tmpfs
    - tmpfs
    - defaults
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ("" | length == 0)
  - (device_name.stdout | length == 0)
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /dev/shm: Make sure nodev option is part of the to /dev/shm
    options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',nodev''
      }) }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - mount_info is defined and "nodev" not in mount_info.options
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /dev/shm: Ensure /dev/shm is mounted with nodev option'
  mount:
    path: /dev/shm
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("" |
    length == 0)
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nodev
  - no_reboot_needed


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

function perform_remediation {
    


    mount_point_match_regexp="$(printf "[[:space:]]%s[[:space:]]" /dev/shm)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nodev)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        echo "tmpfs /dev/shm tmpfs defaults,${previous_mount_opts}nodev 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep "nodev"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nodev|" /etc/fstab
    fi


    if mkdir -p "/dev/shm"; then
        if mountpoint -q "/dev/shm"; then
            mount -o remount --target "/dev/shm"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Add noexec Option to /dev/shm   [ref]

The noexec mount option can be used to prevent binaries from being executed out of /dev/shm. It can be dangerous to allow the execution of binaries from world-writable temporary storage directories such as /dev/shm. Add the noexec option to the fourth column of /etc/fstab for the line which controls mounting of /dev/shm.
Rationale:
Allowing users to execute binaries from world-writable directories such as /dev/shm can expose the system to potential compromise.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_mount_option_dev_shm_noexec
Identifiers and References

References:  11, 13, 14, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS05.06, DSS06.06, CCI-001764, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, 1.1.9


Complexity:low
Disruption:high
Strategy:configure
- name: 'Add noexec Option to /dev/shm: Check information associated to mountpoint'
  command: findmnt  '/dev/shm'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /dev/shm: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /dev/shm: If /dev/shm not mounted, craft mount_info
    manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /dev/shm
    - tmpfs
    - tmpfs
    - defaults
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ("" | length == 0)
  - (device_name.stdout | length == 0)
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /dev/shm: Make sure noexec option is part of the to
    /dev/shm options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',noexec''
      }) }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - mount_info is defined and "noexec" not in mount_info.options
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /dev/shm: Ensure /dev/shm is mounted with noexec option'
  mount:
    path: /dev/shm
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("" |
    length == 0)
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_noexec
  - no_reboot_needed


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

function perform_remediation {
    


    mount_point_match_regexp="$(printf "[[:space:]]%s[[:space:]]" /dev/shm)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|noexec)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        echo "tmpfs /dev/shm tmpfs defaults,${previous_mount_opts}noexec 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep "noexec"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,noexec|" /etc/fstab
    fi


    if mkdir -p "/dev/shm"; then
        if mountpoint -q "/dev/shm"; then
            mount -o remount --target "/dev/shm"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Add nosuid Option to /dev/shm   [ref]

The nosuid mount option can be used to prevent execution of setuid programs in /dev/shm. The SUID and SGID permissions should not be required in these world-writable directories. Add the nosuid option to the fourth column of /etc/fstab for the line which controls mounting of /dev/shm.
Rationale:
The presence of SUID and SGID executables should be tightly controlled. Users should not be able to execute SUID or SGID binaries from temporary storage partitions.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_mount_option_dev_shm_nosuid
Identifiers and References

References:  11, 13, 14, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS05.06, DSS06.06, CCI-001764, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, 1.1.8


Complexity:low
Disruption:high
Strategy:configure
- name: 'Add nosuid Option to /dev/shm: Check information associated to mountpoint'
  command: findmnt  '/dev/shm'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /dev/shm: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /dev/shm: If /dev/shm not mounted, craft mount_info
    manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /dev/shm
    - tmpfs
    - tmpfs
    - defaults
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ("" | length == 0)
  - (device_name.stdout | length == 0)
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /dev/shm: Make sure nosuid option is part of the to
    /dev/shm options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',nosuid''
      }) }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - mount_info is defined and "nosuid" not in mount_info.options
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /dev/shm: Ensure /dev/shm is mounted with nosuid option'
  mount:
    path: /dev/shm
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("" |
    length == 0)
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_dev_shm_nosuid
  - no_reboot_needed


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

function perform_remediation {
    


    mount_point_match_regexp="$(printf "[[:space:]]%s[[:space:]]" /dev/shm)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nosuid)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        echo "tmpfs /dev/shm tmpfs defaults,${previous_mount_opts}nosuid 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep "nosuid"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nosuid|" /etc/fstab
    fi


    if mkdir -p "/dev/shm"; then
        if mountpoint -q "/dev/shm"; then
            mount -o remount --target "/dev/shm"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Add nodev Option to /home   [ref]

The nodev mount option can be used to prevent device files from being created in /home. Legitimate character and block devices should exist only in the /dev directory on the root partition or within chroot jails built for system services. Add the nodev option to the fourth column of /etc/fstab for the line which controls mounting of /home.
Rationale:
The only legitimate location for device files is the /dev directory located on the root partition. The only exception to this is chroot jails.
Severity: 
unknown
Rule ID:xccdf_org.ssgproject.content_rule_mount_option_home_nodev
Identifiers and References

References:  BP28(R12), SRG-OS-000368-GPOS-00154, 1.1.18


Complexity:low
Disruption:high
Strategy:configure
- name: 'Add nodev Option to /home: Check information associated to mountpoint'
  command: findmnt --fstab '/home'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - configure_strategy
  - high_disruption
  - low_complexity
  - mount_option_home_nodev
  - no_reboot_needed
  - unknown_severity

- name: 'Add nodev Option to /home: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - configure_strategy
  - high_disruption
  - low_complexity
  - mount_option_home_nodev
  - no_reboot_needed
  - unknown_severity

- name: 'Add nodev Option to /home: If /home not mounted, craft mount_info manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /home
    - ''
    - ''
    - defaults
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ("--fstab" | length == 0)
  - (device_name.stdout | length == 0)
  tags:
  - configure_strategy
  - high_disruption
  - low_complexity
  - mount_option_home_nodev
  - no_reboot_needed
  - unknown_severity

- name: 'Add nodev Option to /home: Make sure nodev option is part of the to /home
    options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',nodev''
      }) }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - mount_info is defined and "nodev" not in mount_info.options
  tags:
  - configure_strategy
  - high_disruption
  - low_complexity
  - mount_option_home_nodev
  - no_reboot_needed
  - unknown_severity

- name: 'Add nodev Option to /home: Ensure /home is mounted with nodev option'
  mount:
    path: /home
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("--fstab"
    | length == 0)
  tags:
  - configure_strategy
  - high_disruption
  - low_complexity
  - mount_option_home_nodev
  - no_reboot_needed
  - unknown_severity


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

function perform_remediation {
    
        mount_point_match_regexp="$(printf "[[:space:]]%s[[:space:]]" "/home")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/home' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /home in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "[[:space:]]%s[[:space:]]" /home)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nodev)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        echo " /home  defaults,${previous_mount_opts}nodev 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep "nodev"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nodev|" /etc/fstab
    fi


    if mkdir -p "/home"; then
        if mountpoint -q "/home"; then
            mount -o remount --target "/home"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Add nodev Option to /tmp   [ref]

The nodev mount option can be used to prevent device files from being created in /tmp. Legitimate character and block devices should not exist within temporary directories like /tmp. Add the nodev option to the fourth column of /etc/fstab for the line which controls mounting of /tmp.
Rationale:
The only legitimate location for device files is the /dev directory located on the root partition. The only exception to this is chroot jails.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_mount_option_tmp_nodev
Identifiers and References

References:  BP28(R12), 11, 13, 14, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS05.06, DSS06.06, CCI-001764, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, 1.1.3


Complexity:low
Disruption:high
Strategy:configure
- name: 'Add nodev Option to /tmp: Check information associated to mountpoint'
  command: findmnt --fstab '/tmp'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /tmp: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /tmp: If /tmp not mounted, craft mount_info manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /tmp
    - ''
    - ''
    - defaults
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - ("--fstab" | length == 0)
  - (device_name.stdout | length == 0)
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /tmp: Make sure nodev option is part of the to /tmp options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',nodev''
      }) }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - mount_info is defined and "nodev" not in mount_info.options
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /tmp: Ensure /tmp is mounted with nodev option'
  mount:
    path: /tmp
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("--fstab"
    | length == 0)
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_nodev
  - no_reboot_needed


# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && findmnt --kernel "/tmp" > /dev/null || findmnt --fstab "/tmp" > /dev/null ); then

function perform_remediation {
    
        mount_point_match_regexp="$(printf "[[:space:]]%s[[:space:]]" "/tmp")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/tmp' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /tmp in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "[[:space:]]%s[[:space:]]" /tmp)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nodev)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        echo " /tmp  defaults,${previous_mount_opts}nodev 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep "nodev"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nodev|" /etc/fstab
    fi


    if mkdir -p "/tmp"; then
        if mountpoint -q "/tmp"; then
            mount -o remount --target "/tmp"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Add noexec Option to /tmp   [ref]

The noexec mount option can be used to prevent binaries from being executed out of /tmp. Add the noexec option to the fourth column of /etc/fstab for the line which controls mounting of /tmp.
Rationale:
Allowing users to execute binaries from world-writable directories such as /tmp should never be necessary in normal operation and can expose the system to potential compromise.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_mount_option_tmp_noexec
Identifiers and References

References:  BP28(R12), 11, 13, 14, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS05.06, DSS06.06, CCI-001764, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, 1.1.5


Complexity:low
Disruption:high
Strategy:configure
- name: 'Add noexec Option to /tmp: Check information associated to mountpoint'
  command: findmnt --fstab '/tmp'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /tmp: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /tmp: If /tmp not mounted, craft mount_info manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /tmp
    - ''
    - ''
    - defaults
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - ("--fstab" | length == 0)
  - (device_name.stdout | length == 0)
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /tmp: Make sure noexec option is part of the to /tmp
    options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',noexec''
      }) }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - mount_info is defined and "noexec" not in mount_info.options
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /tmp: Ensure /tmp is mounted with noexec option'
  mount:
    path: /tmp
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("--fstab"
    | length == 0)
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_noexec
  - no_reboot_needed


# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && findmnt --kernel "/tmp" > /dev/null || findmnt --fstab "/tmp" > /dev/null ); then

function perform_remediation {
    
        mount_point_match_regexp="$(printf "[[:space:]]%s[[:space:]]" "/tmp")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/tmp' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /tmp in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "[[:space:]]%s[[:space:]]" /tmp)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|noexec)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        echo " /tmp  defaults,${previous_mount_opts}noexec 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep "noexec"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,noexec|" /etc/fstab
    fi


    if mkdir -p "/tmp"; then
        if mountpoint -q "/tmp"; then
            mount -o remount --target "/tmp"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Add nosuid Option to /tmp   [ref]

The nosuid mount option can be used to prevent execution of setuid programs in /tmp. The SUID and SGID permissions should not be required in these world-writable directories. Add the nosuid option to the fourth column of /etc/fstab for the line which controls mounting of /tmp.
Rationale:
The presence of SUID and SGID executables should be tightly controlled. Users should not be able to execute SUID or SGID binaries from temporary storage partitions.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_mount_option_tmp_nosuid
Identifiers and References

References:  BP28(R12), 11, 13, 14, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS05.06, DSS06.06, CCI-001764, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.11.2.9, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.8.2.1, A.8.2.2, A.8.2.3, A.8.3.1, A.8.3.3, A.9.1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, CM-7(a), CM-7(b), CM-6(a), AC-6, AC-6(1), MP-7, PR.IP-1, PR.PT-2, PR.PT-3, SRG-OS-000368-GPOS-00154, 1.1.4


Complexity:low
Disruption:high
Strategy:configure
- name: 'Add nosuid Option to /tmp: Check information associated to mountpoint'
  command: findmnt --fstab '/tmp'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /tmp: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /tmp: If /tmp not mounted, craft mount_info manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /tmp
    - ''
    - ''
    - defaults
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - ("--fstab" | length == 0)
  - (device_name.stdout | length == 0)
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /tmp: Make sure nosuid option is part of the to /tmp
    options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',nosuid''
      }) }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - mount_info is defined and "nosuid" not in mount_info.options
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /tmp: Ensure /tmp is mounted with nosuid option'
  mount:
    path: /tmp
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/tmp" in ansible_mounts | map(attribute="mount") | list )
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("--fstab"
    | length == 0)
  tags:
  - NIST-800-53-AC-6
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-MP-7
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_tmp_nosuid
  - no_reboot_needed


# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && findmnt --kernel "/tmp" > /dev/null || findmnt --fstab "/tmp" > /dev/null ); then

function perform_remediation {
    
        mount_point_match_regexp="$(printf "[[:space:]]%s[[:space:]]" "/tmp")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/tmp' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /tmp in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "[[:space:]]%s[[:space:]]" /tmp)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nosuid)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        echo " /tmp  defaults,${previous_mount_opts}nosuid 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep "nosuid"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nosuid|" /etc/fstab
    fi


    if mkdir -p "/tmp"; then
        if mountpoint -q "/tmp"; then
            mount -o remount --target "/tmp"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Add nodev Option to /var/tmp   [ref]

The nodev mount option can be used to prevent device files from being created in /var/tmp. Legitimate character and block devices should not exist within temporary directories like /var/tmp. Add the nodev option to the fourth column of /etc/fstab for the line which controls mounting of /var/tmp.
Rationale:
The only legitimate location for device files is the /dev directory located on the root partition. The only exception to this is chroot jails.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_mount_option_var_tmp_nodev
Identifiers and References

References:  BP28(R12), CCI-001764, SRG-OS-000368-GPOS-00154, 1.1.12


Complexity:low
Disruption:high
Strategy:configure
- name: 'Add nodev Option to /var/tmp: Check information associated to mountpoint'
  command: findmnt --fstab '/var/tmp'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "/var/tmp" in ansible_mounts | map(attribute="mount") | list
    )
  tags:
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /var/tmp: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /var/tmp: If /var/tmp not mounted, craft mount_info manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /var/tmp
    - ''
    - ''
    - defaults
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - ("--fstab" | length == 0)
  - (device_name.stdout | length == 0)
  tags:
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /var/tmp: Make sure nodev option is part of the to /var/tmp
    options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',nodev''
      }) }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - mount_info is defined and "nodev" not in mount_info.options
  tags:
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_nodev
  - no_reboot_needed

- name: 'Add nodev Option to /var/tmp: Ensure /var/tmp is mounted with nodev option'
  mount:
    path: /var/tmp
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("--fstab"
    | length == 0)
  tags:
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_nodev
  - no_reboot_needed


# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && findmnt --kernel "/var/tmp" > /dev/null || findmnt --fstab "/var/tmp" > /dev/null ); then

function perform_remediation {
    
        mount_point_match_regexp="$(printf "[[:space:]]%s[[:space:]]" "/var/tmp")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/var/tmp' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /var/tmp in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "[[:space:]]%s[[:space:]]" /var/tmp)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nodev)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        echo " /var/tmp  defaults,${previous_mount_opts}nodev 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep "nodev"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nodev|" /etc/fstab
    fi


    if mkdir -p "/var/tmp"; then
        if mountpoint -q "/var/tmp"; then
            mount -o remount --target "/var/tmp"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Add noexec Option to /var/tmp   [ref]

The noexec mount option can be used to prevent binaries from being executed out of /var/tmp. Add the noexec option to the fourth column of /etc/fstab for the line which controls mounting of /var/tmp.
Rationale:
Allowing users to execute binaries from world-writable directories such as /var/tmp should never be necessary in normal operation and can expose the system to potential compromise.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_mount_option_var_tmp_noexec
Identifiers and References

References:  BP28(R12), CCI-001764, SRG-OS-000368-GPOS-00154, 1.1.14


Complexity:low
Disruption:high
Strategy:configure
- name: 'Add noexec Option to /var/tmp: Check information associated to mountpoint'
  command: findmnt --fstab '/var/tmp'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "/var/tmp" in ansible_mounts | map(attribute="mount") | list
    )
  tags:
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /var/tmp: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /var/tmp: If /var/tmp not mounted, craft mount_info
    manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /var/tmp
    - ''
    - ''
    - defaults
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - ("--fstab" | length == 0)
  - (device_name.stdout | length == 0)
  tags:
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /var/tmp: Make sure noexec option is part of the to
    /var/tmp options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',noexec''
      }) }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - mount_info is defined and "noexec" not in mount_info.options
  tags:
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_noexec
  - no_reboot_needed

- name: 'Add noexec Option to /var/tmp: Ensure /var/tmp is mounted with noexec option'
  mount:
    path: /var/tmp
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("--fstab"
    | length == 0)
  tags:
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_noexec
  - no_reboot_needed


# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && findmnt --kernel "/var/tmp" > /dev/null || findmnt --fstab "/var/tmp" > /dev/null ); then

function perform_remediation {
    
        mount_point_match_regexp="$(printf "[[:space:]]%s[[:space:]]" "/var/tmp")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/var/tmp' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /var/tmp in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "[[:space:]]%s[[:space:]]" /var/tmp)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|noexec)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        echo " /var/tmp  defaults,${previous_mount_opts}noexec 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep "noexec"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,noexec|" /etc/fstab
    fi


    if mkdir -p "/var/tmp"; then
        if mountpoint -q "/var/tmp"; then
            mount -o remount --target "/var/tmp"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Add nosuid Option to /var/tmp   [ref]

The nosuid mount option can be used to prevent execution of setuid programs in /var/tmp. The SUID and SGID permissions should not be required in these world-writable directories. Add the nosuid option to the fourth column of /etc/fstab for the line which controls mounting of /var/tmp.
Rationale:
The presence of SUID and SGID executables should be tightly controlled. Users should not be able to execute SUID or SGID binaries from temporary storage partitions.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_mount_option_var_tmp_nosuid
Identifiers and References

References:  BP28(R12), CCI-001764, SRG-OS-000368-GPOS-00154, 1.1.13


Complexity:low
Disruption:high
Strategy:configure
- name: 'Add nosuid Option to /var/tmp: Check information associated to mountpoint'
  command: findmnt --fstab '/var/tmp'
  register: device_name
  failed_when: device_name.rc > 1
  changed_when: false
  when: ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman",
    "container"] and "/var/tmp" in ansible_mounts | map(attribute="mount") | list
    )
  tags:
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /var/tmp: Create mount_info dictionary variable'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - '{{ device_name.stdout_lines[0].split() | list | lower }}'
  - '{{ device_name.stdout_lines[1].split() | list }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - device_name.stdout is defined and device_name.stdout_lines is defined
  - (device_name.stdout | length > 0)
  tags:
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /var/tmp: If /var/tmp not mounted, craft mount_info
    manually'
  set_fact:
    mount_info: '{{ mount_info|default({})|combine({item.0: item.1}) }}'
  with_together:
  - - target
    - source
    - fstype
    - options
  - - /var/tmp
    - ''
    - ''
    - defaults
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - ("--fstab" | length == 0)
  - (device_name.stdout | length == 0)
  tags:
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /var/tmp: Make sure nosuid option is part of the to
    /var/tmp options'
  set_fact:
    mount_info: '{{ mount_info | combine( {''options'':''''~mount_info.options~'',nosuid''
      }) }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - mount_info is defined and "nosuid" not in mount_info.options
  tags:
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_nosuid
  - no_reboot_needed

- name: 'Add nosuid Option to /var/tmp: Ensure /var/tmp is mounted with nosuid option'
  mount:
    path: /var/tmp
    src: '{{ mount_info.source }}'
    opts: '{{ mount_info.options }}'
    state: mounted
    fstype: '{{ mount_info.fstype }}'
  when:
  - ( ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
    and "/var/tmp" in ansible_mounts | map(attribute="mount") | list )
  - (device_name.stdout is defined and (device_name.stdout | length > 0)) or ("--fstab"
    | length == 0)
  tags:
  - configure_strategy
  - high_disruption
  - low_complexity
  - medium_severity
  - mount_option_var_tmp_nosuid
  - no_reboot_needed


# Remediation is applicable only in certain platforms
if ( [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && findmnt --kernel "/var/tmp" > /dev/null || findmnt --fstab "/var/tmp" > /dev/null ); then

function perform_remediation {
    
        mount_point_match_regexp="$(printf "[[:space:]]%s[[:space:]]" "/var/tmp")"

    grep "$mount_point_match_regexp" -q /etc/fstab \
        || { echo "The mount point '/var/tmp' is not even in /etc/fstab, so we can't set up mount options" >&2;
                echo "Not remediating, because there is no record of /var/tmp in /etc/fstab" >&2; return 1; }
    


    mount_point_match_regexp="$(printf "[[:space:]]%s[[:space:]]" /var/tmp)"

    # If the mount point is not in /etc/fstab, get previous mount options from /etc/mtab
    if ! grep "$mount_point_match_regexp" /etc/fstab; then
        # runtime opts without some automatic kernel/userspace-added defaults
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/mtab | head -1 |  awk '{print $4}' \
                    | sed -E "s/(rw|defaults|seclabel|nosuid)(,|$)//g;s/,$//")
        [ "$previous_mount_opts" ] && previous_mount_opts+=","
        echo " /var/tmp  defaults,${previous_mount_opts}nosuid 0 0" >> /etc/fstab
    # If the mount_opt option is not already in the mount point's /etc/fstab entry, add it
    elif ! grep "$mount_point_match_regexp" /etc/fstab | grep "nosuid"; then
        previous_mount_opts=$(grep "$mount_point_match_regexp" /etc/fstab | awk '{print $4}')
        sed -i "s|\(${mount_point_match_regexp}.*${previous_mount_opts}\)|\1,nosuid|" /etc/fstab
    fi


    if mkdir -p "/var/tmp"; then
        if mountpoint -q "/var/tmp"; then
            mount -o remount --target "/var/tmp"
        fi
    fi
}

perform_remediation

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Restrict Programs from Dangerous Execution Patterns   Group contains 2 groups and 3 rules
[ref]   The recommendations in this section are designed to ensure that the system's features to protect against potentially dangerous program execution are activated. These protections are applied at the system initialization or kernel level, and defend against certain types of badly-configured or compromised programs.
Group   Disable Core Dumps   Group contains 2 rules
[ref]   A core dump file is the memory image of an executable program when it was terminated by the operating system due to errant behavior. In most cases, only software developers legitimately need to access these files. The core dump files may also contain sensitive information, or unnecessarily occupy large amounts of disk space.

Once a hard limit is set in /etc/security/limits.conf, or to a file within the /etc/security/limits.d/ directory, a user cannot increase that limit within his or her own session. If access to core dumps is required, consider restricting them to only certain users or groups. See the limits.conf man page for more information.

The core dumps of setuid programs are further protected. The sysctl variable fs.suid_dumpable controls whether the kernel allows core dumps from these programs at all. The default value of 0 is recommended.

Rule   Disable Core Dumps for All Users   [ref]

To disable core dumps for all users, add the following line to /etc/security/limits.conf, or to a file within the /etc/security/limits.d/ directory: 
*     hard   core    0
Rationale:
A core dump includes a memory image taken at the time the operating system terminates an application. The memory image could contain sensitive data and is generally useful only for developers trying to debug problems.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_disable_users_coredumps
Identifiers and References

References:  1, 12, 13, 15, 16, 2, 7, 8, APO13.01, BAI04.04, DSS01.03, DSS03.05, DSS05.07, CCI-000366, SR 6.2, SR 7.1, SR 7.2, A.12.1.3, A.17.2.1, CM-6, SC-7(10), DE.CM-1, PR.DS-4, 3.3.1.1, 3.3.1.2, 3.3.1.3, SRG-OS-000480-GPOS-00227, 1.6.4


Complexity:low
Disruption:low
Strategy:restrict
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-53-CM-6
  - NIST-800-53-SC-7(10)
  - PCI-DSSv4-3.3.1.1
  - PCI-DSSv4-3.3.1.2
  - PCI-DSSv4-3.3.1.3
  - disable_users_coredumps
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Disable core dumps with limits
  lineinfile:
    dest: /etc/security/limits.conf
    regexp: ^[^#].*core
    line: '*        hard       core      0'
    create: true
  when: '"libpam-runtime" in ansible_facts.packages'
  tags:
  - NIST-800-53-CM-6
  - NIST-800-53-SC-7(10)
  - PCI-DSSv4-3.3.1.1
  - PCI-DSSv4-3.3.1.2
  - PCI-DSSv4-3.3.1.3
  - disable_users_coredumps
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy


# Remediation is applicable only in certain platforms
if dpkg-query --show --showformat='${db:Status-Status}\n' 'libpam-runtime' 2>/dev/null | grep -q installed; then

SECURITY_LIMITS_FILE="/etc/security/limits.conf"

if grep -qE '^\s*\*\s+hard\s+core' $SECURITY_LIMITS_FILE; then
        sed -ri 's/(hard\s+core\s+)[[:digit:]]+/\1 0/' $SECURITY_LIMITS_FILE
else
        echo "*     hard   core    0" >> $SECURITY_LIMITS_FILE
fi

if ls /etc/security/limits.d/*.conf > /dev/null; then
        sed -ri '/^\s*\*\s+hard\s+core/d' /etc/security/limits.d/*.conf
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Core Dumps for SUID programs   [ref]

To set the runtime status of the fs.suid_dumpable kernel parameter, run the following command: 
$ sudo sysctl -w fs.suid_dumpable=0
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
fs.suid_dumpable = 0
Rationale:
The core dump of a setuid program is more likely to contain sensitive data, as the program itself runs with greater privileges than the user who initiated execution of the program. Disabling the ability for any setuid program to write a core file decreases the risk of unauthorized access of such data.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_fs_suid_dumpable
Identifiers and References

References:  BP28(R23), 164.308(a)(1)(ii)(D), 164.308(a)(3), 164.308(a)(4), 164.310(b), 164.310(c), 164.312(a), 164.312(e), SI-11(a), SI-11(b), 3.3.1.1, 3.3.1.2, 3.3.1.3, 1.6.4


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*fs.suid_dumpable.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-SI-11(a)
  - NIST-800-53-SI-11(b)
  - PCI-DSSv4-3.3.1.1
  - PCI-DSSv4-3.3.1.2
  - PCI-DSSv4-3.3.1.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_fs_suid_dumpable

- name: Comment out any occurrences of fs.suid_dumpable from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*fs.suid_dumpable
    replace: '#fs.suid_dumpable'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-SI-11(a)
  - NIST-800-53-SI-11(b)
  - PCI-DSSv4-3.3.1.1
  - PCI-DSSv4-3.3.1.2
  - PCI-DSSv4-3.3.1.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_fs_suid_dumpable

- name: Ensure sysctl fs.suid_dumpable is set to 0
  sysctl:
    name: fs.suid_dumpable
    value: '0'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-SI-11(a)
  - NIST-800-53-SI-11(b)
  - PCI-DSSv4-3.3.1.1
  - PCI-DSSv4-3.3.1.2
  - PCI-DSSv4-3.3.1.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_fs_suid_dumpable

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of fs.suid_dumpable from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*fs.suid_dumpable.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "fs.suid_dumpable" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for fs.suid_dumpable
#
/sbin/sysctl -q -n -w fs.suid_dumpable="0"

#
# If fs.suid_dumpable present in /etc/sysctl.conf, change value to "0"
#	else, add "fs.suid_dumpable = 0" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^fs.suid_dumpable")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "0"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^fs.suid_dumpable\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^fs.suid_dumpable\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Enable ExecShield   Group contains 1 rule
[ref]   ExecShield describes kernel features that provide protection against exploitation of memory corruption errors such as buffer overflows. These features include random placement of the stack and other memory regions, prevention of execution in memory that should only hold data, and special handling of text buffers. These protections are enabled by default on 32-bit systems and controlled through sysctl variables kernel.exec-shield and kernel.randomize_va_space. On the latest 64-bit systems, kernel.exec-shield cannot be enabled or disabled with sysctl.

Rule   Enable Randomized Layout of Virtual Address Space   [ref]

To set the runtime status of the kernel.randomize_va_space kernel parameter, run the following command: 
$ sudo sysctl -w kernel.randomize_va_space=2
To make sure that the setting is persistent, add the following line to a file in the directory /etc/sysctl.d: 
kernel.randomize_va_space = 2
Rationale:
Address space layout randomization (ASLR) makes it more difficult for an attacker to predict the location of attack code they have introduced into a process's address space during an attempt at exploitation. Additionally, ASLR makes it more difficult for an attacker to know the location of existing code in order to re-purpose it using return oriented programming (ROP) techniques.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sysctl_kernel_randomize_va_space
Identifiers and References

References:  BP28(R23), 3.1.7, CCI-000366, CCI-002824, 164.308(a)(1)(ii)(D), 164.308(a)(3), 164.308(a)(4), 164.310(b), 164.310(c), 164.312(a), 164.312(e), CIP-002-5 R1.1, CIP-002-5 R1.2, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 4.1, CIP-004-6 4.2, CIP-004-6 R2.2.3, CIP-004-6 R2.2.4, CIP-004-6 R2.3, CIP-004-6 R4, CIP-005-6 R1, CIP-005-6 R1.1, CIP-005-6 R1.2, CIP-007-3 R3, CIP-007-3 R3.1, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.1.3, CIP-007-3 R5.2.1, CIP-007-3 R5.2.3, CIP-007-3 R8.4, CIP-009-6 R.1.1, CIP-009-6 R4, SC-30, SC-30(2), CM-6(a), Req-2.2.1, 2.2.3, SRG-OS-000433-GPOS-00193, SRG-OS-000480-GPOS-00227, UBTU-20-010448, 1.6.2


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: List /etc/sysctl.d/*.conf files
  find:
    paths:
    - /etc/sysctl.d/
    - /run/sysctl.d/
    - /usr/local/lib/sysctl.d/
    - /usr/lib/sysctl.d/
    contains: ^[\s]*kernel.randomize_va_space.*$
    patterns: '*.conf'
    file_type: any
  register: find_sysctl_d
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - DISA-STIG-UBTU-20-010448
  - NIST-800-171-3.1.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-30
  - NIST-800-53-SC-30(2)
  - PCI-DSS-Req-2.2.1
  - PCI-DSSv4-2.2.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_randomize_va_space

- name: Comment out any occurrences of kernel.randomize_va_space from config files
  replace:
    path: '{{ item.path }}'
    regexp: ^[\s]*kernel.randomize_va_space
    replace: '#kernel.randomize_va_space'
  loop: '{{ find_sysctl_d.files }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - DISA-STIG-UBTU-20-010448
  - NIST-800-171-3.1.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-30
  - NIST-800-53-SC-30(2)
  - PCI-DSS-Req-2.2.1
  - PCI-DSSv4-2.2.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_randomize_va_space

- name: Ensure sysctl kernel.randomize_va_space is set to 2
  sysctl:
    name: kernel.randomize_va_space
    value: '2'
    sysctl_file: /etc/sysctl.conf
    state: present
    reload: true
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - DISA-STIG-UBTU-20-010448
  - NIST-800-171-3.1.7
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-30
  - NIST-800-53-SC-30(2)
  - PCI-DSS-Req-2.2.1
  - PCI-DSSv4-2.2.3
  - disable_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - reboot_required
  - sysctl_kernel_randomize_va_space

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# Comment out any occurrences of kernel.randomize_va_space from /etc/sysctl.d/*.conf files

for f in /etc/sysctl.d/*.conf /run/sysctl.d/*.conf /usr/local/lib/sysctl.d/*.conf /usr/lib/sysctl.d/*.conf; do

  matching_list=$(grep -P '^(?!#).*[\s]*kernel.randomize_va_space.*$' $f | uniq )
  if ! test -z "$matching_list"; then
    while IFS= read -r entry; do
      escaped_entry=$(sed -e 's|/|\\/|g' <<< "$entry")
      # comment out "kernel.randomize_va_space" matches to preserve user data
      sed -i "s/^${escaped_entry}$/# &/g" $f
    done <<< "$matching_list"
  fi
done

#
# Set sysctl config file which to save the desired value
#

SYSCONFIG_FILE="/etc/sysctl.conf"


#
# Set runtime for kernel.randomize_va_space
#
/sbin/sysctl -q -n -w kernel.randomize_va_space="2"

#
# If kernel.randomize_va_space present in /etc/sysctl.conf, change value to "2"
#	else, add "kernel.randomize_va_space = 2" to /etc/sysctl.conf
#

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^kernel.randomize_va_space")

# shellcheck disable=SC2059
printf -v formatted_output "%s = %s" "$stripped_key" "2"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^kernel.randomize_va_space\\>" "${SYSCONFIG_FILE}"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^kernel.randomize_va_space\\>.*/$escaped_formatted_output/gi" "${SYSCONFIG_FILE}"
else
    if [[ -s "${SYSCONFIG_FILE}" ]] && [[ -n "$(tail -c 1 -- "${SYSCONFIG_FILE}" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "${SYSCONFIG_FILE}"
    fi
    printf '%s\n' "$formatted_output" >> "${SYSCONFIG_FILE}"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Services   Group contains 40 groups and 83 rules
[ref]   The best protection against vulnerable software is running less software. This section describes how to review the software which Ubuntu 20.04 installs on a system and disable software which is not needed. It then enumerates the software packages installed on a default Ubuntu 20.04 system and provides guidance about which ones can be safely disabled.

Ubuntu 20.04 provides a convenient minimal install option that essentially installs the bare necessities for a functional system. When building Ubuntu 20.04 systems, it is highly recommended to select the minimal packages and then build up the system from there.
Group   Avahi Server   Group contains 1 group and 2 rules
[ref]   The Avahi daemon implements the DNS Service Discovery and Multicast DNS protocols, which provide service and host discovery on a network. It allows a system to automatically identify resources on the network, such as printers or web servers. This capability is also known as mDNSresponder and is a major part of Zeroconf networking.
Group   Disable Avahi Server if Possible   Group contains 2 rules
[ref]   Because the Avahi daemon service keeps an open network port, it is subject to network attacks. Disabling it can reduce the system's vulnerability to such attacks.

Rule   Uninstall avahi Server Package   [ref]

If the system does not need to have an Avahi server which implements the DNS Service Discovery and Multicast DNS protocols, the avahi-autoipd and avahi packages can be uninstalled.
Rationale:
Automatic discovery of network services is not normally required for system functionality. It is recommended to remove this package to reduce the potential attack surface.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_avahi_removed
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 2.2.3


Complexity:low
Disruption:low
Strategy:disable
include remove_avahi-daemon

class remove_avahi-daemon {
  package { 'avahi-daemon':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure avahi-daemon is removed
  package:
    name: avahi-daemon
    state: absent
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_avahi_removed

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove avahi-daemon
#	   from the system, and may remove any packages
#	   that depend on avahi-daemon. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "avahi-daemon"

Rule   Disable Avahi Server Software   [ref]

The avahi-daemon service can be disabled with the following command: 
$ sudo systemctl mask --now avahi-daemon.service
Rationale:
Because the Avahi daemon service keeps an open network port, it is subject to network attacks. Its functionality is convenient but is only appropriate if the local network can be trusted.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_service_avahi-daemon_disabled
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 2.2.4, 2.2.3


Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    systemd:
      units:
      - name: avahi-daemon.service
        enabled: false
        mask: true
      - name: avahi-daemon.socket
        enabled: false
        mask: true



[customizations.services]
disabled = ["avahi-daemon"]

Complexity:low
Disruption:low
Strategy:enable
include disable_avahi-daemon

class disable_avahi-daemon {
  service {'avahi-daemon':
    enable => false,
    ensure => 'stopped',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Block Disable service avahi-daemon
  block:

  - name: Disable service avahi-daemon
    block:

    - name: Disable service avahi-daemon
      systemd:
        name: avahi-daemon.service
        enabled: 'no'
        state: stopped
        masked: 'yes'
    rescue:

    - name: Intentionally ignored previous 'Disable service avahi-daemon' failure,
        service was already disabled
      meta: noop
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_avahi-daemon_disabled

- name: Unit Socket Exists - avahi-daemon.socket
  command: systemctl list-unit-files avahi-daemon.socket
  register: socket_file_exists
  changed_when: false
  failed_when: socket_file_exists.rc not in [0, 1]
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_avahi-daemon_disabled

- name: Disable socket avahi-daemon
  systemd:
    name: avahi-daemon.socket
    enabled: 'no'
    state: stopped
    masked: 'yes'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"avahi-daemon.socket" in socket_file_exists.stdout_lines[1]'
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_avahi-daemon_disabled

Complexity:low
Disruption:low
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" stop 'avahi-daemon.service'
"$SYSTEMCTL_EXEC" disable 'avahi-daemon.service'
"$SYSTEMCTL_EXEC" mask 'avahi-daemon.service'
# Disable socket activation if we have a unit file for it
if "$SYSTEMCTL_EXEC" -q list-unit-files avahi-daemon.socket; then
    "$SYSTEMCTL_EXEC" stop 'avahi-daemon.socket'
    "$SYSTEMCTL_EXEC" mask 'avahi-daemon.socket'
fi
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'avahi-daemon.service' || true

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Cron and At Daemons   Group contains 1 group and 25 rules
[ref]   The cron and at services are used to allow commands to be executed at a later time. The cron service is required by almost all systems to perform necessary maintenance tasks, while at may or may not be required on a given system. Both daemons should be configured defensively.
Group   Restrict at and cron to Authorized Users if Necessary   Group contains 6 rules
[ref]   The /etc/cron.allow and /etc/at.allow files contain lists of users who are allowed to use cron and at to delay execution of processes. If these files exist and if the corresponding files /etc/cron.deny and /etc/at.deny do not exist, then only users listed in the relevant allow files can run the crontab and at commands to submit jobs to be run at scheduled intervals. On many systems, only the system administrator needs the ability to schedule jobs. Note that even if a given user is not listed in cron.allow, cron jobs can still be run as that user. The cron.allow file controls only administrative access to the crontab command for scheduling and modifying cron jobs.

To restrict at and cron to only authorized users:
  • Remove the cron.deny file:
    $ sudo rm /etc/cron.deny
  • Edit /etc/cron.allow, adding one line for each user allowed to use the crontab command to create cron jobs.
  • Remove the at.deny file:
    $ sudo rm /etc/at.deny
  • Edit /etc/at.allow, adding one line for each user allowed to use the at command to create at jobs.

Rule   Verify Group Who Owns /etc/at.allow file   [ref]

If /etc/at.allow exists, it must be group-owned by root. To properly set the group owner of /etc/at.allow, run the command: 
$ sudo chgrp root /etc/at.allow
Rationale:
If the owner of the at.allow file is not set to root, the possibility exists for an unauthorized user to view or edit sensitive information.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_at_allow
Identifiers and References

References:  2.2.6, 5.1.9


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/at.allow
  stat:
    path: /etc/at.allow
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_at_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/at.allow
  file:
    path: /etc/at.allow
    group: '0'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_at_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chgrp 0 /etc/at.allow

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Group Who Owns /etc/cron.allow file   [ref]

If /etc/cron.allow exists, it must be group-owned by root. To properly set the group owner of /etc/cron.allow, run the command: 
$ sudo chgrp root /etc/cron.allow
Rationale:
If the owner of the cron.allow file is not set to root, the possibility exists for an unauthorized user to view or edit sensitive information.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_cron_allow
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-000366, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, 2.2.6, SRG-OS-000480-GPOS-00227, 5.1.8


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/cron.allow
  stat:
    path: /etc/cron.allow
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_cron_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/cron.allow
  file:
    path: /etc/cron.allow
    group: '0'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_groupowner_cron_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chgrp 0 /etc/cron.allow

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify User Who Owns /etc/at.allow file   [ref]

If /etc/at.allow exists, it must be owned by root. To properly set the owner of /etc/at.allow, run the command: 
$ sudo chown root /etc/at.allow
Rationale:
If the owner of the at.allow file is not set to root, the possibility exists for an unauthorized user to view or edit sensitive information.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_at_allow
Identifiers and References

References:  2.2.6, 5.1.9


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/at.allow
  stat:
    path: /etc/at.allow
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_at_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/at.allow
  file:
    path: /etc/at.allow
    owner: '0'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_at_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chown 0 /etc/at.allow

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify User Who Owns /etc/cron.allow file   [ref]

If /etc/cron.allow exists, it must be owned by root. To properly set the owner of /etc/cron.allow, run the command: 
$ sudo chown root /etc/cron.allow
Rationale:
If the owner of the cron.allow file is not set to root, the possibility exists for an unauthorized user to view or edit sensitive information.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_cron_allow
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, CCI-000366, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, 2.2.6, SRG-OS-000480-GPOS-00227, 5.1.8


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/cron.allow
  stat:
    path: /etc/cron.allow
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_cron_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/cron.allow
  file:
    path: /etc/cron.allow
    owner: '0'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_owner_cron_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chown 0 /etc/cron.allow

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Permissions on /etc/at.allow file   [ref]

If /etc/at.allow exists, it must have permissions 0640 or more restrictive. To properly set the permissions of /etc/at.allow, run the command: 
$ sudo chmod 0640 /etc/at.allow
Rationale:
If the permissions of the at.allow file are not set to 0640 or more restrictive, the possibility exists for an unauthorized user to view or edit sensitive information.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_at_allow
Identifiers and References

References:  2.2.6, 5.1.9


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/at.allow
  stat:
    path: /etc/at.allow
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_at_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwrt on /etc/at.allow
  file:
    path: /etc/at.allow
    mode: u-xs,g-xws,o-xwrt
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_at_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chmod u-xs,g-xws,o-xwrt /etc/at.allow

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Permissions on /etc/cron.allow file   [ref]

If /etc/cron.allow exists, it must have permissions 0640 or more restrictive. To properly set the permissions of /etc/cron.allow, run the command: 
$ sudo chmod 0640 /etc/cron.allow
Rationale:
If the permissions of the cron.allow file are not set to 0640 or more restrictive, the possibility exists for an unauthorized user to view or edit sensitive information.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_cron_allow
Identifiers and References

References:  2.2.6, SRG-OS-000480-GPOS-00227, 5.1.8


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/cron.allow
  stat:
    path: /etc/cron.allow
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_cron_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xws,o-xwrt on /etc/cron.allow
  file:
    path: /etc/cron.allow
    mode: u-xs,g-xws,o-xwrt
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_cron_allow
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chmod u-xs,g-xws,o-xwrt /etc/cron.allow

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable cron Service   [ref]

The crond service is used to execute commands at preconfigured times. It is required by almost all systems to perform necessary maintenance tasks, such as notifying root of system activity. The cron service can be enabled with the following command: 
$ sudo systemctl enable cron.service
Rationale:
Due to its usage for maintenance and security-supporting tasks, enabling the cron daemon is essential.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_service_cron_enabled
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-6(a), PR.IP-1, PR.PT-3, 2.2.6, 5.1.1



[customizations.services]
enabled = ["cron"]

Complexity:low
Disruption:low
Strategy:enable
include enable_cron

class enable_cron {
  service {'cron':
    enable => true,
    ensure => 'running',
  }
}

Complexity:low
Disruption:low
Strategy:enable
- name: Enable service cron
  block:

  - name: Gather the package facts
    package_facts:
      manager: auto

  - name: Enable service cron
    systemd:
      name: cron
      enabled: 'yes'
      state: started
      masked: 'no'
    when:
    - '"cron" in ansible_facts.packages'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_cron_enabled

Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'cron.service'
"$SYSTEMCTL_EXEC" start 'cron.service'
"$SYSTEMCTL_EXEC" enable 'cron.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Group Who Owns cron.d   [ref]

To properly set the group owner of /etc/cron.d, run the command: 
$ sudo chgrp root /etc/cron.d
Rationale:
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_cron_d
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.7


Complexity:low
Disruption:low
Strategy:configure
- name: Ensure group owner on /etc/cron.d/
  file:
    path: /etc/cron.d/
    state: directory
    group: '0'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_groupowner_cron_d
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.d/ -maxdepth 1 -type d -exec chgrp 0 {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Group Who Owns cron.daily   [ref]

To properly set the group owner of /etc/cron.daily, run the command: 
$ sudo chgrp root /etc/cron.daily
Rationale:
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_cron_daily
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.4


Complexity:low
Disruption:low
Strategy:configure
- name: Ensure group owner on /etc/cron.daily/
  file:
    path: /etc/cron.daily/
    state: directory
    group: '0'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_groupowner_cron_daily
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.daily/ -maxdepth 1 -type d -exec chgrp 0 {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Group Who Owns cron.hourly   [ref]

To properly set the group owner of /etc/cron.hourly, run the command: 
$ sudo chgrp root /etc/cron.hourly
Rationale:
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_cron_hourly
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.3


Complexity:low
Disruption:low
Strategy:configure
- name: Ensure group owner on /etc/cron.hourly/
  file:
    path: /etc/cron.hourly/
    state: directory
    group: '0'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_groupowner_cron_hourly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.hourly/ -maxdepth 1 -type d -exec chgrp 0 {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Group Who Owns cron.monthly   [ref]

To properly set the group owner of /etc/cron.monthly, run the command: 
$ sudo chgrp root /etc/cron.monthly
Rationale:
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_cron_monthly
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.6


Complexity:low
Disruption:low
Strategy:configure
- name: Ensure group owner on /etc/cron.monthly/
  file:
    path: /etc/cron.monthly/
    state: directory
    group: '0'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_groupowner_cron_monthly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.monthly/ -maxdepth 1 -type d -exec chgrp 0 {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Group Who Owns cron.weekly   [ref]

To properly set the group owner of /etc/cron.weekly, run the command: 
$ sudo chgrp root /etc/cron.weekly
Rationale:
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_cron_weekly
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.5


Complexity:low
Disruption:low
Strategy:configure
- name: Ensure group owner on /etc/cron.weekly/
  file:
    path: /etc/cron.weekly/
    state: directory
    group: '0'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_groupowner_cron_weekly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.weekly/ -maxdepth 1 -type d -exec chgrp 0 {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Group Who Owns Crontab   [ref]

To properly set the group owner of /etc/crontab, run the command: 
$ sudo chgrp root /etc/crontab
Rationale:
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_crontab
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.2


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/crontab
  stat:
    path: /etc/crontab
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_groupowner_crontab
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/crontab
  file:
    path: /etc/crontab
    group: '0'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_groupowner_crontab
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chgrp 0 /etc/crontab

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Owner on cron.d   [ref]

To properly set the owner of /etc/cron.d, run the command: 
$ sudo chown root /etc/cron.d
Rationale:
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct user to prevent unauthorized changes.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_cron_d
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.7


Complexity:low
Disruption:low
Strategy:configure
- name: Ensure owner on directory /etc/cron.d/
  file:
    path: /etc/cron.d/
    state: directory
    owner: '0'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_owner_cron_d
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.d/ -maxdepth 1 -type d -exec chown 0 {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Owner on cron.daily   [ref]

To properly set the owner of /etc/cron.daily, run the command: 
$ sudo chown root /etc/cron.daily
Rationale:
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct user to prevent unauthorized changes.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_cron_daily
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.4


Complexity:low
Disruption:low
Strategy:configure
- name: Ensure owner on directory /etc/cron.daily/
  file:
    path: /etc/cron.daily/
    state: directory
    owner: '0'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_owner_cron_daily
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.daily/ -maxdepth 1 -type d -exec chown 0 {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Owner on cron.hourly   [ref]

To properly set the owner of /etc/cron.hourly, run the command: 
$ sudo chown root /etc/cron.hourly
Rationale:
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct user to prevent unauthorized changes.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_cron_hourly
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.3


Complexity:low
Disruption:low
Strategy:configure
- name: Ensure owner on directory /etc/cron.hourly/
  file:
    path: /etc/cron.hourly/
    state: directory
    owner: '0'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_owner_cron_hourly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.hourly/ -maxdepth 1 -type d -exec chown 0 {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Owner on cron.monthly   [ref]

To properly set the owner of /etc/cron.monthly, run the command: 
$ sudo chown root /etc/cron.monthly
Rationale:
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct user to prevent unauthorized changes.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_cron_monthly
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.6


Complexity:low
Disruption:low
Strategy:configure
- name: Ensure owner on directory /etc/cron.monthly/
  file:
    path: /etc/cron.monthly/
    state: directory
    owner: '0'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_owner_cron_monthly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.monthly/ -maxdepth 1 -type d -exec chown 0 {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Owner on cron.weekly   [ref]

To properly set the owner of /etc/cron.weekly, run the command: 
$ sudo chown root /etc/cron.weekly
Rationale:
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct user to prevent unauthorized changes.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_cron_weekly
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.5


Complexity:low
Disruption:low
Strategy:configure
- name: Ensure owner on directory /etc/cron.weekly/
  file:
    path: /etc/cron.weekly/
    state: directory
    owner: '0'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_owner_cron_weekly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.weekly/ -maxdepth 1 -type d -exec chown 0 {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Owner on crontab   [ref]

To properly set the owner of /etc/crontab, run the command: 
$ sudo chown root /etc/crontab
Rationale:
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct user to prevent unauthorized changes.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_crontab
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.1.2


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/crontab
  stat:
    path: /etc/crontab
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_owner_crontab
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/crontab
  file:
    path: /etc/crontab
    owner: '0'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_owner_crontab
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chown 0 /etc/crontab

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Permissions on cron.d   [ref]

To properly set the permissions of /etc/cron.d, run the command: 
$ sudo chmod 0700 /etc/cron.d
Rationale:
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_cron_d
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, 2.2.6, SRG-OS-000480-GPOS-00227, 5.1.7


Complexity:low
Disruption:low
Strategy:configure
- name: Set permissions for /etc/cron.d/
  file:
    path: /etc/cron.d/
    state: directory
    mode: u-s,g-xwrs,o-xwrt
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_cron_d
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.d/ -maxdepth 1 -perm /u+s,g+xwrs,o+xwrt -type d -exec chmod u-s,g-xwrs,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Permissions on cron.daily   [ref]

To properly set the permissions of /etc/cron.daily, run the command: 
$ sudo chmod 0700 /etc/cron.daily
Rationale:
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_cron_daily
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, 2.2.6, SRG-OS-000480-GPOS-00227, 5.1.4


Complexity:low
Disruption:low
Strategy:configure
- name: Set permissions for /etc/cron.daily/
  file:
    path: /etc/cron.daily/
    state: directory
    mode: u-s,g-xwrs,o-xwrt
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_cron_daily
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.daily/ -maxdepth 1 -perm /u+s,g+xwrs,o+xwrt -type d -exec chmod u-s,g-xwrs,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Permissions on cron.hourly   [ref]

To properly set the permissions of /etc/cron.hourly, run the command: 
$ sudo chmod 0700 /etc/cron.hourly
Rationale:
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_cron_hourly
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, 2.2.6, SRG-OS-000480-GPOS-00227, 5.1.3


Complexity:low
Disruption:low
Strategy:configure
- name: Set permissions for /etc/cron.hourly/
  file:
    path: /etc/cron.hourly/
    state: directory
    mode: u-s,g-xwrs,o-xwrt
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_cron_hourly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.hourly/ -maxdepth 1 -perm /u+s,g+xwrs,o+xwrt -type d -exec chmod u-s,g-xwrs,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Permissions on cron.monthly   [ref]

To properly set the permissions of /etc/cron.monthly, run the command: 
$ sudo chmod 0700 /etc/cron.monthly
Rationale:
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_cron_monthly
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, 2.2.6, SRG-OS-000480-GPOS-00227, 5.1.6


Complexity:low
Disruption:low
Strategy:configure
- name: Set permissions for /etc/cron.monthly/
  file:
    path: /etc/cron.monthly/
    state: directory
    mode: u-s,g-xwrs,o-xwrt
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_cron_monthly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.monthly/ -maxdepth 1 -perm /u+s,g+xwrs,o+xwrt -type d -exec chmod u-s,g-xwrs,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Permissions on cron.weekly   [ref]

To properly set the permissions of /etc/cron.weekly, run the command: 
$ sudo chmod 0700 /etc/cron.weekly
Rationale:
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_cron_weekly
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, 2.2.6, SRG-OS-000480-GPOS-00227, 5.1.5


Complexity:low
Disruption:low
Strategy:configure
- name: Set permissions for /etc/cron.weekly/
  file:
    path: /etc/cron.weekly/
    state: directory
    mode: u-s,g-xwrs,o-xwrt
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_cron_weekly
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/cron.weekly/ -maxdepth 1 -perm /u+s,g+xwrs,o+xwrt -type d -exec chmod u-s,g-xwrs,o-xwrt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Permissions on crontab   [ref]

To properly set the permissions of /etc/crontab, run the command: 
$ sudo chmod 0600 /etc/crontab
Rationale:
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should have the correct access rights to prevent unauthorized changes.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_crontab
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, 2.2.6, SRG-OS-000480-GPOS-00227, 5.1.2


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/crontab
  stat:
    path: /etc/crontab
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_crontab
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xwrs,o-xwrt on /etc/crontab
  file:
    path: /etc/crontab
    mode: u-xs,g-xwrs,o-xwrt
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_crontab
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chmod u-xs,g-xwrs,o-xwrt /etc/crontab

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Deprecated services   Group contains 1 rule
[ref]   Some deprecated software services impact the overall system security due to their behavior (leak of confidentiality in network exchange, usage as uncontrolled communication channel, risk associated with the service due to its old age, etc.

Rule   Uninstall the nis package   [ref]

The support for Yellowpages should not be installed unless it is required.
Rationale:
NIS is the historical SUN service for central account management, more and more replaced by LDAP. NIS does not support efficiently security constraints, ACL, etc. and should not be used.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_package_nis_removed
Identifiers and References

References:  2.2.17


Complexity:low
Disruption:low
Strategy:disable
include remove_nis

class remove_nis {
  package { 'nis':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure nis is removed
  package:
    name: nis
    state: absent
  tags:
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - package_nis_removed

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove nis
#	   from the system, and may remove any packages
#	   that depend on nis. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "nis"
Group   DHCP   Group contains 1 group and 1 rule
[ref]   The Dynamic Host Configuration Protocol (DHCP) allows systems to request and obtain an IP address and other configuration parameters from a server.

This guide recommends configuring networking on clients by manually editing the appropriate files under /etc/sysconfig. Use of DHCP can make client systems vulnerable to compromise by rogue DHCP servers, and should be avoided unless necessary. If using DHCP is necessary, however, there are best practices that should be followed to minimize security risk.
Group   Disable DHCP Server   Group contains 1 rule
[ref]   The DHCP server dhcpd is not installed or activated by default. If the software was installed and activated, but the system does not need to act as a DHCP server, it should be disabled and removed.

Rule   Uninstall DHCP Server Package   [ref]

If the system does not need to act as a DHCP server, the dhcp package can be uninstalled. The isc-dhcp-server package can be removed with the following command: 
$ apt-get remove isc-dhcp-server
Rationale:
Removing the DHCP server ensures that it cannot be easily or accidentally reactivated and disrupt network operation.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_dhcp_removed
Identifiers and References

References:  BP28(R1), 11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 2.2.4, 2.2.5


Complexity:low
Disruption:low
Strategy:disable
include remove_isc-dhcp-server

class remove_isc-dhcp-server {
  package { 'isc-dhcp-server':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure isc-dhcp-server is removed
  package:
    name: isc-dhcp-server
    state: absent
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_dhcp_removed

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove isc-dhcp-server
#	   from the system, and may remove any packages
#	   that depend on isc-dhcp-server. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "isc-dhcp-server"
Group   DNS Server   Group contains 1 group and 1 rule
[ref]   Most organizations have an operational need to run at least one nameserver. However, there are many common attacks involving DNS server software, and this server software should be disabled on any system on which it is not needed.
Group   Disable DNS Server   Group contains 1 rule
[ref]   DNS software should be disabled on any systems which does not need to be a nameserver. Note that the BIND DNS server software is not installed on Ubuntu 20.04 by default. The remainder of this section discusses secure configuration of systems which must be nameservers.

Rule   Uninstall bind Package   [ref]

The named service is provided by the bind package. The bind package can be removed with the following command: 
$ apt-get remove bind
Rationale:
If there is no need to make DNS server software available, removing it provides a safeguard against its activation.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_package_bind_removed
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 2.2.4, 2.2.8


Complexity:low
Disruption:low
Strategy:disable
include remove_bind9

class remove_bind9 {
  package { 'bind9':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure bind9 is removed
  package:
    name: bind9
    state: absent
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - package_bind_removed

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove bind9
#	   from the system, and may remove any packages
#	   that depend on bind9. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "bind9"
Group   FTP Server   Group contains 1 group and 1 rule
[ref]   FTP is a common method for allowing remote access to files. Like telnet, the FTP protocol is unencrypted, which means that passwords and other data transmitted during the session can be captured and that the session is vulnerable to hijacking. Therefore, running the FTP server software is not recommended.

However, there are some FTP server configurations which may be appropriate for some environments, particularly those which allow only read-only anonymous access as a means of downloading data available to the public.
Group   Disable vsftpd if Possible   Group contains 1 rule
[ref]   To minimize attack surface, disable vsftpd if at all possible.

Rule   Uninstall vsftpd Package   [ref]

The vsftpd package can be removed with the following command: 
 $ apt-get remove vsftpd
Rationale:
Removing the vsftpd package decreases the risk of its accidental activation.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_package_vsftpd_removed
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, CCI-000197, CCI-000366, CCI-000381, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), IA-5(1)(c), IA-5(1).1(v), CM-7, CM-7.1(ii), PR.IP-1, PR.PT-3, 2.2.4, SRG-OS-000074-GPOS-00042, SRG-OS-000095-GPOS-00049, SRG-OS-000480-GPOS-00227, 2.2.9


Complexity:low
Disruption:low
Strategy:disable
include remove_vsftpd

class remove_vsftpd {
  package { 'vsftpd':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure vsftpd is removed
  package:
    name: vsftpd
    state: absent
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - NIST-800-53-CM-7.1(ii)
  - NIST-800-53-IA-5(1)(c)
  - NIST-800-53-IA-5(1).1(v)
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - package_vsftpd_removed

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove vsftpd
#	   from the system, and may remove any packages
#	   that depend on vsftpd. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "vsftpd"
Group   Web Server   Group contains 2 groups and 2 rules
[ref]   The web server is responsible for providing access to content via the HTTP protocol. Web servers represent a significant security risk because:

  • The HTTP port is commonly probed by malicious sources
  • Web server software is very complex, and includes a long history of vulnerabilities
  • The HTTP protocol is unencrypted and vulnerable to passive monitoring


The system's default web server software is Apache 2 and is provided in the RPM package httpd.
Group   Disable Apache if Possible   Group contains 1 rule
[ref]   If Apache was installed and activated, but the system does not need to act as a web server, then it should be disabled and removed from the system.

Rule   Uninstall httpd Package   [ref]

The apache2 package can be removed with the following command: 
$ apt-get remove apache2
Rationale:
If there is no need to make the web server software available, removing it provides a safeguard against its activation.
Severity: 
unknown
Rule ID:xccdf_org.ssgproject.content_rule_package_httpd_removed
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 2.2.4, 2.2.10


Complexity:low
Disruption:low
Strategy:disable
include remove_apache2

class remove_apache2 {
  package { 'apache2':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure apache2 is removed
  package:
    name: apache2
    state: absent
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - package_httpd_removed
  - unknown_severity

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove apache2
#	   from the system, and may remove any packages
#	   that depend on apache2. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "apache2"
Group   Disable NGINX if Possible   Group contains 1 rule
[ref]   If NGINX was installed and activated, but the system does not need to act as a web server, then it should be removed from the system.

Rule   Uninstall nginx Package   [ref]

The nginx package can be removed with the following command: 
$ apt-get remove nginx
Rationale:
If there is no need to make the web server software available, removing it provides a safeguard against its activation.
Severity: 
unknown
Rule ID:xccdf_org.ssgproject.content_rule_package_nginx_removed
Identifiers and References

References:  BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 2.2.10


Complexity:low
Disruption:low
Strategy:disable
include remove_nginx

class remove_nginx {
  package { 'nginx':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure nginx is removed
  package:
    name: nginx
    state: absent
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - package_nginx_removed
  - unknown_severity

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove nginx
#	   from the system, and may remove any packages
#	   that depend on nginx. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "nginx"
Group   IMAP and POP3 Server   Group contains 2 groups and 2 rules
[ref]   Dovecot provides IMAP and POP3 services. It is not installed by default. The project page at http://www.dovecot.org contains more detailed information about Dovecot configuration.
Group   Disable Cyrus IMAP   Group contains 1 rule
[ref]   If the system does not need to operate as an IMAP or POP3 server, the Cyrus IMAP software should be removed.

Rule   Uninstall cyrus-imapd Package   [ref]

The cyrus-imapd package can be removed with the following command: 
$ apt-get remove cyrus-imapd
Rationale:
If there is no need to make the cyrus-imapd software available, removing it provides a safeguard against its activation.
Severity: 
unknown
Rule ID:xccdf_org.ssgproject.content_rule_package_cyrus-imapd_removed
Identifiers and References

References:  2.2.11


Complexity:low
Disruption:low
Strategy:disable
include remove_cyrus-imapd

class remove_cyrus-imapd {
  package { 'cyrus-imapd':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure cyrus-imapd is removed
  package:
    name: cyrus-imapd
    state: absent
  tags:
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - package_cyrus-imapd_removed
  - unknown_severity

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove cyrus-imapd
#	   from the system, and may remove any packages
#	   that depend on cyrus-imapd. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "cyrus-imapd"
Group   Disable Dovecot   Group contains 1 rule
[ref]   If the system does not need to operate as an IMAP or POP3 server, the dovecot software should be disabled and removed.

Rule   Uninstall dovecot Package   [ref]

The dovecot-core package can be removed with the following command: 
$ apt-get remove dovecot-core
Rationale:
If there is no need to make the Dovecot software available, removing it provides a safeguard against its activation.
Severity: 
unknown
Rule ID:xccdf_org.ssgproject.content_rule_package_dovecot_removed
Identifiers and References

References:  2.2.11


Complexity:low
Disruption:low
Strategy:disable
include remove_dovecot-core

class remove_dovecot-core {
  package { 'dovecot-core':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure dovecot-core is removed
  package:
    name: dovecot-core
    state: absent
  tags:
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - package_dovecot_removed
  - unknown_severity

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove dovecot-core
#	   from the system, and may remove any packages
#	   that depend on dovecot-core. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "dovecot-core"
Group   LDAP   Group contains 2 groups and 2 rules
[ref]   LDAP is a popular directory service, that is, a standardized way of looking up information from a central database. Ubuntu 20.04 includes software that enables a system to act as both an LDAP client and server.
Group   Configure OpenLDAP Clients   Group contains 1 rule
[ref]   This section provides information on which security settings are important to configure in OpenLDAP clients by manually editing the appropriate configuration files. Ubuntu 20.04 provides an automated configuration tool called authconfig and a graphical wrapper for authconfig called system-config-authentication. However, these tools do not provide as much control over configuration as manual editing of configuration files. The authconfig tools do not allow you to specify locations of SSL certificate files, which is useful when trying to use SSL cleanly across several protocols. Installation and configuration of OpenLDAP on Ubuntu 20.04 is available at
Warning:  Before configuring any system to be an LDAP client, ensure that a working LDAP server is present on the network.

Rule   Ensure LDAP client is not installed   [ref]

The Lightweight Directory Access Protocol (LDAP) is a service that provides a method for looking up information from a central database. The lapd-utils package can be removed with the following command: 
$ apt-get remove lapd-utils
Rationale:
If the system does not need to act as an LDAP client, it is recommended that the software is removed to reduce the potential attack surface.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_package_openldap-clients_removed
Identifiers and References

References:  2.2.4, 2.3.5


Complexity:low
Disruption:low
Strategy:disable
include remove_ldap-utils

class remove_ldap-utils {
  package { 'ldap-utils':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure ldap-utils is removed
  package:
    name: ldap-utils
    state: absent
  tags:
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - package_openldap-clients_removed

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove ldap-utils
#	   from the system, and may remove any packages
#	   that depend on ldap-utils. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "ldap-utils"
Group   Configure OpenLDAP Server   Group contains 1 rule
[ref]   This section details some security-relevant settings for an OpenLDAP server.

Rule   Uninstall openldap-servers Package   [ref]

The slapd package is not installed by default on a Ubuntu 20.04 system. It is needed only by the OpenLDAP server, not by the clients which use LDAP for authentication. If the system is not intended for use as an LDAP Server it should be removed.
Rationale:
Unnecessary packages should not be installed to decrease the attack surface of the system. While this software is clearly essential on an LDAP server, it is not necessary on typical desktop or workstation systems.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_package_openldap-servers_removed
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 2.2.4, 2.2.6


Complexity:low
Disruption:low
Strategy:disable
include remove_slapd

class remove_slapd {
  package { 'slapd':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure slapd is removed
  package:
    name: slapd
    state: absent
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - package_openldap-servers_removed

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove slapd
#	   from the system, and may remove any packages
#	   that depend on slapd. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "slapd"
Group   Mail Server Software   Group contains 1 group and 2 rules
[ref]   Mail servers are used to send and receive email over the network. Mail is a very common service, and Mail Transfer Agents (MTAs) are obvious targets of network attack. Ensure that systems are not running MTAs unnecessarily, and configure needed MTAs as defensively as possible.

Very few systems at any site should be configured to directly receive email over the network. Users should instead use mail client programs to retrieve email from a central server that supports protocols such as IMAP or POP3. However, it is normal for most systems to be independently capable of sending email, for instance so that cron jobs can report output to an administrator. Most MTAs, including Postfix, support a submission-only mode in which mail can be sent from the local system to a central site MTA (or directly delivered to a local account), but the system still cannot receive mail directly over a network.

The alternatives program in Ubuntu 20.04 permits selection of other mail server software (such as Sendmail), but Postfix is the default and is preferred. Postfix was coded with security in mind and can also be more effectively contained by SELinux as its modular design has resulted in separate processes performing specific actions. More information is available on its website, http://www.postfix.org.
Group   Configure SMTP For Mail Clients   Group contains 1 rule
[ref]   This section discusses settings for Postfix in a submission-only e-mail configuration.

Rule   Disable Postfix Network Listening   [ref]

Edit the file /etc/postfix/main.cf to ensure that only the following inet_interfaces line appears: 
inet_interfaces = loopback-only
Rationale:
This ensures postfix accepts mail messages (such as cron job reports) from the local system only, and not from the network, which protects it from network attack.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_postfix_network_listening_disabled
Identifiers and References

References:  BP28(R48), 11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, CCI-000382, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 2.2.4, 2.2.15


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { dpkg-query --show --showformat='${db:Status-Status}\n' 'postfix' 2>/dev/null | grep -q installed; }; then

var_postfix_inet_interfaces='loopback-only'


if [ -e "/etc/postfix/main.cf" ] ; then
    
    LC_ALL=C sed -i "/^\s*inet_interfaces\s\+=\s\+/Id" "/etc/postfix/main.cf"
else
    touch "/etc/postfix/main.cf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/postfix/main.cf"

cp "/etc/postfix/main.cf" "/etc/postfix/main.cf.bak"
# Insert at the end of the file
printf '%s\n' "inet_interfaces=$var_postfix_inet_interfaces" >> "/etc/postfix/main.cf"
# Clean up after ourselves.
rm "/etc/postfix/main.cf.bak"

systemctl restart postfix

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure Mail Transfer Agent is not Listening on any non-loopback Address   [ref]

Mail Transfer Agents (MTA), such as sendmail and Postfix, are used to listen for incoming mail and transfer the messages to the appropriate user or mail server. If the system is not intended to be a mail server, it is recommended that the MTA be configured to only process local mail.
Rationale:
The software for all Mail Transfer Agents is complex and most have a long history of security issues. While it is important to ensure that the system can process local mail messages, it is not necessary to have the MTA's daemon listening on a port unless the server is intended to be a mail server that receives and processes mail from other systems.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_has_nonlocal_mta
Identifiers and References

References:  2.2.15

Group   NFS and RPC   Group contains 2 groups and 2 rules
[ref]   The Network File System is a popular distributed filesystem for the Unix environment, and is very widely deployed. This section discusses the circumstances under which it is possible to disable NFS and its dependencies, and then details steps which should be taken to secure NFS's configuration. This section is relevant to systems operating as NFS clients, as well as to those operating as NFS servers.
Group   Disable All NFS Services if Possible   Group contains 1 group and 1 rule
[ref]   If there is not a reason for the system to operate as either an NFS client or an NFS server, follow all instructions in this section to disable subsystems required by NFS.
Warning:  The steps in this section will prevent a system from operating as either an NFS client or an NFS server. Only perform these steps on systems which do not need NFS at all.
Group   Disable Services Used Only by NFS   Group contains 1 rule
[ref]   If NFS is not needed, disable the NFS client daemons nfslock, rpcgssd, and rpcidmapd.

All of these daemons run with elevated privileges, and many listen for network connections. If they are not needed, they should be disabled to improve system security posture.

Rule   Uninstall rpcbind Package   [ref]

The rpcbind utility maps RPC services to the ports on which they listen. RPC processes notify rpcbind when they start, registering the ports they are listening on and the RPC program numbers they expect to serve. The rpcbind service redirects the client to the proper port number so it can communicate with the requested service. If the system does not require RPC (such as for NFS servers) then this service should be disabled. The rpcbind package can be removed with the following command: 
$ apt-get remove rpcbind
Rationale:
If the system does not require rpc based services, it is recommended that rpcbind be disabled to reduce the attack surface.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_package_rpcbind_removed
Identifiers and References

References:  2.3.6


Complexity:low
Disruption:low
Strategy:disable
include remove_rpcbind

class remove_rpcbind {
  package { 'rpcbind':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure rpcbind is removed
  package:
    name: rpcbind
    state: absent
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - package_rpcbind_removed

Complexity:low
Disruption:low
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# CAUTION: This remediation script will remove rpcbind
#	   from the system, and may remove any packages
#	   that depend on rpcbind. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "rpcbind"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Uninstall nfs-kernel-server Package   [ref]

The nfs-kernel-server package can be removed with the following command: 
$ apt-get remove nfs-kernel-server
Rationale:
If the system does not export NFS shares or act as an NFS client, it is recommended that these services be removed to reduce the remote attack surface.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_package_nfs-kernel-server_removed
Identifiers and References

References:  2.2.7


Complexity:low
Disruption:low
Strategy:disable
include remove_nfs-kernel-server

class remove_nfs-kernel-server {
  package { 'nfs-kernel-server':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure nfs-kernel-server is removed
  package:
    name: nfs-kernel-server
    state: absent
  tags:
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - package_nfs-kernel-server_removed

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove nfs-kernel-server
#	   from the system, and may remove any packages
#	   that depend on nfs-kernel-server. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "nfs-kernel-server"
Group   Network Time Protocol   Group contains 8 rules
[ref]   The Network Time Protocol is used to manage the system clock over a network. Computer clocks are not very accurate, so time will drift unpredictably on unmanaged systems. Central time protocols can be used both to ensure that time is consistent among a network of systems, and that their time is consistent with the outside world.

If every system on a network reliably reports the same time, then it is much easier to correlate log messages in case of an attack. In addition, a number of cryptographic protocols (such as Kerberos) use timestamps to prevent certain types of attacks. If your network does not have synchronized time, these protocols may be unreliable or even unusable.

Depending on the specifics of the network, global time accuracy may be just as important as local synchronization, or not very important at all. If your network is connected to the Internet, using a public timeserver (or one provided by your enterprise) provides globally accurate timestamps which may be essential in investigating or responding to an attack which originated outside of your network.

A typical network setup involves a small number of internal systems operating as NTP servers, and the remainder obtaining time information from those internal servers.

There is a choice between the daemons ntpd and chronyd, which are available from the repositories in the ntp and chrony packages respectively.

The default chronyd daemon can work well when external time references are only intermittently accesible, can perform well even when the network is congested for longer periods of time, can usually synchronize the clock faster and with better time accuracy, and quickly adapts to sudden changes in the rate of the clock, for example, due to changes in the temperature of the crystal oscillator. Chronyd should be considered for all systems which are frequently suspended or otherwise intermittently disconnected and reconnected to a network. Mobile and virtual systems for example.

The ntpd NTP daemon fully supports NTP protocol version 4 (RFC 5905), including broadcast, multicast, manycast clients and servers, and the orphan mode. It also supports extra authentication schemes based on public-key cryptography (RFC 5906). The NTP daemon (ntpd) should be considered for systems which are normally kept permanently on. Systems which are required to use broadcast or multicast IP, or to perform authentication of packets with the Autokey protocol, should consider using ntpd.

Refer to https://help.ubuntu.com/lts/serverguide/NTP.html for more detailed comparison of features of chronyd and ntpd daemon features respectively, and for further guidance how to choose between the two NTP daemons.

The upstream manual pages at http://chrony.tuxfamily.org/manual.html for chronyd and http://www.ntp.org for ntpd provide additional information on the capabilities and configuration of each of the NTP daemons.

Rule   The Chrony package is installed   [ref]

System time should be synchronized between all systems in an environment. This is typically done by establishing an authoritative time server or set of servers and having all systems synchronize their clocks to them. The chrony package can be installed with the following command: 
$ apt-get install chrony
Rationale:
Time synchronization is important to support time sensitive security mechanisms like Kerberos and also ensures log files have consistent time records across the enterprise, which aids in forensic investigations.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_chrony_installed
Identifiers and References

References:  BP28(R43), 0988, 1405, FMT_SMF_EXT.1, Req-10.4, 10.6.1, SRG-OS-000355-GPOS-00143, UBTU-20-010435, 2.2.1.1



[[packages]]
name = "chrony"
version = "*"

Complexity:low
Disruption:low
Strategy:enable
include install_chrony

class install_chrony {
  package { 'chrony':
    ensure => 'installed',
  }
}

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure chrony is installed
  package:
    name: chrony
    state: present
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - DISA-STIG-UBTU-20-010435
  - PCI-DSS-Req-10.4
  - PCI-DSSv4-10.6.1
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_chrony_installed

Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

DEBIAN_FRONTEND=noninteractive apt-get install -y "chrony"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   The Chronyd service is enabled   [ref]

chrony is a daemon which implements the Network Time Protocol (NTP) is designed to synchronize system clocks across a variety of systems and use a source that is highly accurate. More information on chrony can be found at http://chrony.tuxfamily.org/. Chrony can be configured to be a client and/or a server. To enable Chronyd service, you can run: # systemctl enable chronyd.service This recommendation only applies if chrony is in use on the system.
Rationale:
If chrony is in use on the system proper configuration is vital to ensuring time synchronization is working properly.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_service_chronyd_enabled
Identifiers and References

References:  0988, 1405, SRG-OS-000355-GPOS-00143, 2.2.1.3



[customizations.services]
enabled = ["chrony"]

Complexity:low
Disruption:low
Strategy:enable
include enable_chrony

class enable_chrony {
  service {'chrony':
    enable => true,
    ensure => 'running',
  }
}

Complexity:low
Disruption:low
Strategy:enable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_chronyd_enabled

- name: Enable service chrony
  block:

  - name: Gather the package facts
    package_facts:
      manager: auto

  - name: Enable service chrony
    systemd:
      name: chrony
      enabled: 'yes'
      state: started
      masked: 'no'
    when:
    - '"chrony" in ansible_facts.packages'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"chrony" in ansible_facts.packages'
  tags:
  - enable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - service_chronyd_enabled

Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { dpkg-query --show --showformat='${db:Status-Status}\n' 'chrony' 2>/dev/null | grep -q installed; }; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'chrony.service'
"$SYSTEMCTL_EXEC" start 'chrony.service'
"$SYSTEMCTL_EXEC" enable 'chrony.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable the NTP Daemon   [ref]

The ntp service can be enabled with the following command: 
$ sudo systemctl enable ntp.service
Rationale:
Enabling the ntp service ensures that the ntp service will be running and that the system will synchronize its time to any servers specified. This is important whether the system is configured to be a client (and synchronize only its own clock) or it is also acting as an NTP server to other systems. Synchronizing time is essential for authentication services such as Kerberos, but it is also important for maintaining accurate logs and auditing possible security breaches.

The NTP daemon offers all of the functionality of ntpdate, which is now deprecated.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_service_ntp_enabled
Identifiers and References

References:  NT012(R03), 1, 14, 15, 16, 3, 5, 6, APO11.04, BAI03.05, DSS05.04, DSS05.07, MEA02.01, CCI-000160, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, CM-6(a), AU-8(1)(a), PR.PT-1, Req-10.4, 10.6.1, 2.2.1.4



[customizations.services]
enabled = ["ntp"]

Complexity:low
Disruption:low
Strategy:enable
include enable_ntp

class enable_ntp {
  service {'ntp':
    enable => true,
    ensure => 'running',
  }
}

Complexity:low
Disruption:low
Strategy:enable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-53-AU-8(1)(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.4
  - PCI-DSSv4-10.6.1
  - enable_strategy
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_ntp_enabled

- name: Enable service ntp
  block:

  - name: Gather the package facts
    package_facts:
      manager: auto

  - name: Enable service ntp
    systemd:
      name: ntp
      enabled: 'yes'
      state: started
      masked: 'no'
    when:
    - '"ntp" in ansible_facts.packages'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"ntp" in ansible_facts.packages'
  tags:
  - NIST-800-53-AU-8(1)(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.4
  - PCI-DSSv4-10.6.1
  - enable_strategy
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_ntp_enabled

Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { dpkg-query --show --showformat='${db:Status-Status}\n' 'ntp' 2>/dev/null | grep -q installed; }; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'ntp.service'
"$SYSTEMCTL_EXEC" start 'ntp.service'
"$SYSTEMCTL_EXEC" enable 'ntp.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable systemd_timesyncd Service   [ref]

The systemd_timesyncd service can be enabled with the following command: 
$ sudo systemctl enable systemd_timesyncd.service
Rationale:
Enabling the systemd_timesyncd service ensures that this host uses the ntp protocol to fetch time data from a ntp server. Synchronizing time is essential for authentication services such as Kerberos, but it is also important for maintaining accurate logs and auditing possible security breaches.

Additional information on Ubuntu network time protocol is available at https://help.ubuntu.com/lts/serverguide/NTP.html.en.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_service_timesyncd_enabled
Identifiers and References

References:  NT012(R03), 1, 14, 15, 16, 3, 5, 6, APO11.04, BAI03.05, DSS05.04, DSS05.07, MEA02.01, CCI-000160, 4.3.3.3.9, 4.3.3.5.8, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 2.10, SR 2.11, SR 2.12, SR 2.8, SR 2.9, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.7.1, CM-6(a), AU-8(1)(a), PR.PT-1, Req-10.4, 10.6.1, 2.2.1.2



[customizations.services]
enabled = ["systemd-timesyncd"]

Complexity:low
Disruption:low
Strategy:enable
include enable_systemd-timesyncd

class enable_systemd-timesyncd {
  service {'systemd-timesyncd':
    enable => true,
    ensure => 'running',
  }
}

Complexity:low
Disruption:low
Strategy:enable
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-53-AU-8(1)(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.4
  - PCI-DSSv4-10.6.1
  - enable_strategy
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_timesyncd_enabled

- name: Enable service systemd-timesyncd
  block:

  - name: Gather the package facts
    package_facts:
      manager: auto

  - name: Enable service systemd-timesyncd
    systemd:
      name: systemd-timesyncd
      enabled: 'yes'
      state: started
      masked: 'no'
    when:
    - '"systemd" in ansible_facts.packages'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ( not ( "chrony" in ansible_facts.packages ) and not ( "ntp" in ansible_facts.packages
    ) )
  tags:
  - NIST-800-53-AU-8(1)(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.4
  - PCI-DSSv4-10.6.1
  - enable_strategy
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - service_timesyncd_enabled

Complexity:low
Disruption:low
Strategy:enable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { ( ! ( dpkg-query --show --showformat='${db:Status-Status}\n' 'chrony' 2>/dev/null | grep -q installed ) && ! ( dpkg-query --show --showformat='${db:Status-Status}\n' 'ntp' 2>/dev/null | grep -q installed ) ); }; then

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" unmask 'systemd-timesyncd.service'
"$SYSTEMCTL_EXEC" start 'systemd-timesyncd.service'
"$SYSTEMCTL_EXEC" enable 'systemd-timesyncd.service'

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure that chronyd is running under chrony user account   [ref]

chrony is a daemon which implements the Network Time Protocol (NTP). It is designed to synchronize system clocks across a variety of systems and use a source that is highly accurate. More information on chrony can be found at http://chrony.tuxfamily.org/. Chrony can be configured to be a client and/or a server. To ensure that chronyd is running under chrony user account, user variable in /etc/chrony/chrony.conf is set to _chrony or is absent: 
user _chrony
This recommendation only applies if chrony is in use on the system.
Rationale:
If chrony is in use on the system proper configuration is vital to ensuring time synchronization is working properly.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_chronyd_run_as_chrony_user
Identifiers and References

References:  2.2.1.3


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { dpkg-query --show --showformat='${db:Status-Status}\n' 'chrony' 2>/dev/null | grep -q installed; }; then

# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^user")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "_chrony"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^user\\>" "/etc/chrony/chrony.conf"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^user\\>.*/$escaped_formatted_output/gi" "/etc/chrony/chrony.conf"
else
    if [[ -s "/etc/chrony/chrony.conf" ]] && [[ -n "$(tail -c 1 -- "/etc/chrony/chrony.conf" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/chrony/chrony.conf"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/chrony/chrony.conf"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   A remote time server for Chrony is configured   [ref]

Chrony is a daemon which implements the Network Time Protocol (NTP). It is designed to synchronize system clocks across a variety of systems and use a source that is highly accurate. More information on chrony can be found at http://chrony.tuxfamily.org/. Chrony can be configured to be a client and/or a server. Add or edit server or pool lines to /etc/chrony/chrony.conf as appropriate: 
server <remote-server>
Multiple servers may be configured.
Rationale:
If chrony is in use on the system proper configuration is vital to ensuring time synchronization is working properly.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_chronyd_specify_remote_server
Identifiers and References

References:  BP28(R43), CCI-000160, CCI-001891, 0988, 1405, CM-6(a), AU-8(1)(a), Req-10.4.3, 10.6.2, 2.2.1.3


Complexity:low
Disruption:low
Strategy:configure
- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - NIST-800-53-AU-8(1)(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.4.3
  - PCI-DSSv4-10.6.2
  - chronyd_specify_remote_server
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
- name: XCCDF Value var_multiple_time_servers # promote to variable
  set_fact:
    var_multiple_time_servers: !!str 0.pool.ntp.org,1.pool.ntp.org,2.pool.ntp.org,3.pool.ntp.org
  tags:
    - always

- name: Detect if chrony is already configured with pools or servers
  find:
    path: /etc
    patterns: chrony.conf
    contains: ^[\s]*(?:server|pool)[\s]+[\w]+
  register: chrony_servers
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"chrony" in ansible_facts.packages'
  tags:
  - NIST-800-53-AU-8(1)(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.4.3
  - PCI-DSSv4-10.6.2
  - chronyd_specify_remote_server
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Configure remote time servers
  lineinfile:
    path: /etc/chrony/chrony.conf
    line: server {{ item }}
    state: present
    create: true
  loop: '{{ var_multiple_time_servers.split(",") }}'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - '"chrony" in ansible_facts.packages'
  - chrony_servers.matched == 0
  tags:
  - NIST-800-53-AU-8(1)(a)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.4.3
  - PCI-DSSv4-10.6.2
  - chronyd_specify_remote_server
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { dpkg-query --show --showformat='${db:Status-Status}\n' 'chrony' 2>/dev/null | grep -q installed; }; then

var_multiple_time_servers='0.pool.ntp.org,1.pool.ntp.org,2.pool.ntp.org,3.pool.ntp.org'


config_file="/etc/chrony/chrony.conf"

if ! grep -q '^[[:space:]]*\(server\|pool\)[[:space:]]\+[[:graph:]]\+' "$config_file" ; then
  if ! grep -q '#[[:space:]]*server' "$config_file" ; then
    for server in $(echo "$var_multiple_time_servers" | tr ',' '\n') ; do
      printf '\nserver %s' "$server" >> "$config_file"
    done
  else
    sed -i 's/#[ \t]*server/server/g' "$config_file"
  fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Configure server restrictions for ntpd   [ref]

ntpd is a daemon which implements the Network Time Protocol (NTP). It is designed to synchronize system clocks across a variety of systems and use a source that is highly accurate. More information on NTP can be found at http://www.ntp.org. ntp can be configured to be a client and/or a server. To ensure that ntpd implements correct server restrictions, make sure that the following lines exist in the file /etc/ntpd.conf: 
restrict -4 default kod nomodify notrap nopeer noquery
restrict -6 default kod nomodify notrap nopeer noquery
This recommendation only applies if ntp is in use on the system.
Rationale:
If ntp is in use on the system proper configuration is vital to ensuring time synchronization is working properly.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_ntpd_configure_restrictions
Identifiers and References

References:  2.2.1.4


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { dpkg-query --show --showformat='${db:Status-Status}\n' 'ntp' 2>/dev/null | grep -q installed; }; then

if [ -e "/etc/ntp.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*restrict \-4\s\+/Id" "/etc/ntp.conf"
else
    touch "/etc/ntp.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ntp.conf"

cp "/etc/ntp.conf" "/etc/ntp.conf.bak"
# Insert at the end of the file
printf '%s\n' "restrict -4 default kod nomodify notrap nopeer noquery" >> "/etc/ntp.conf"
# Clean up after ourselves.
rm "/etc/ntp.conf.bak"
if [ -e "/etc/ntp.conf" ] ; then
    
    LC_ALL=C sed -i "/^\s*restrict \-6\s\+/Id" "/etc/ntp.conf"
else
    touch "/etc/ntp.conf"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ntp.conf"

cp "/etc/ntp.conf" "/etc/ntp.conf.bak"
# Insert at the end of the file
printf '%s\n' "restrict -6 default kod nomodify notrap nopeer noquery" >> "/etc/ntp.conf"
# Clean up after ourselves.
rm "/etc/ntp.conf.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Configure ntpd To Run As ntp User   [ref]

ntp is a daemon which implements the Network Time Protocol (NTP). It is designed to synchronize system clocks across a variety of systems and use a source that is highly accurate. More information on NTP can be found at http://www.ntp.org. ntp can be configured to be a client and/or a server. To ensure that ntpd is running as ntp user, Add or edit the OPTIONS variable in /etc/sysconfig/ntpd to include ' -u ntp:ntp ': 
OPTIONS="-u ntp:ntp"
This recommendation only applies if ntp is in use on the system.
Rationale:
If ntp is in use on the system proper configuration is vital to ensuring time synchronization is working properly. Running ntpd under dedicated user accounts limits the attack surface for potential attacker exploiting security flaws in the daemon or the protocol.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_ntpd_run_as_ntp_user
Identifiers and References

References:  2.2.1.4


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && { dpkg-query --show --showformat='${db:Status-Status}\n' 'ntp' 2>/dev/null | grep -q installed; }; then

if grep -q 'OPTIONS=.*' /etc/sysconfig/ntpd; then
	# trying to solve cases where the parameter after OPTIONS
	#may or may not be enclosed in quotes
	sed -i -E 's/^([\s]*OPTIONS=["]?[^"]*)("?)/\1 -u ntp:ntp\2/' /etc/sysconfig/ntpd
else
	echo 'OPTIONS="-u ntp:ntp"' >> /etc/sysconfig/ntpd
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Obsolete Services   Group contains 4 groups and 6 rules
[ref]   This section discusses a number of network-visible services which have historically caused problems for system security, and for which disabling or severely limiting the service has been the best available guidance for some time. As a result of this, many of these services are not installed as part of Ubuntu 20.04 by default.

Organizations which are running these services should switch to more secure equivalents as soon as possible. If it remains absolutely necessary to run one of these services for legacy reasons, care should be taken to restrict the service as much as possible, for instance by configuring host firewall software such as iptables to restrict access to the vulnerable service to only those remote hosts which have a known need to use it.
Group   Xinetd   Group contains 1 rule
[ref]   The xinetd service acts as a dedicated listener for some network services (mostly, obsolete ones) and can be used to provide access controls and perform some logging. It has been largely obsoleted by other features, and it is not installed by default. The older Inetd service is not even available as part of Ubuntu 20.04.

Rule   Uninstall xinetd Package   [ref]

The xinetd package can be removed with the following command: 
$ apt-get remove xinetd
Rationale:
Removing the xinetd package decreases the risk of the xinetd service's accidental (or intentional) activation.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_package_xinetd_removed
Identifiers and References

References:  BP28(R1), 11, 12, 14, 15, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06, CCI-000305, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4, 2.2.4, 2.1.1


Complexity:low
Disruption:low
Strategy:disable
include remove_xinetd

class remove_xinetd {
  package { 'xinetd':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure xinetd is removed
  package:
    name: xinetd
    state: absent
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - package_xinetd_removed

Complexity:low
Disruption:low
Strategy:disable
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

# CAUTION: This remediation script will remove xinetd
#	   from the system, and may remove any packages
#	   that depend on xinetd. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "xinetd"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Group   Rlogin, Rsh, and Rexec   Group contains 2 rules
[ref]   The Berkeley r-commands are legacy services which allow cleartext remote access and have an insecure trust model.

Rule   Uninstall rsh Package   [ref]

The rsh-client package contains the client commands for the rsh services
Rationale:
These legacy clients contain numerous security exposures and have been replaced with the more secure SSH package. Even if the server is removed, it is best to ensure the clients are also removed to prevent users from inadvertently attempting to use these commands and therefore exposing their credentials. Note that removing the rsh-client package removes the clients for rsh,rcp, and rlogin.
Severity: 
unknown
Rule ID:xccdf_org.ssgproject.content_rule_package_rsh_removed
Identifiers and References

References:  BP28(R1), 3.1.13, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), A.8.2.3, A.13.1.1, A.13.2.1, A.13.2.3, A.14.1.2, A.14.1.3, 2.2.4, 2.3.2


Complexity:low
Disruption:low
Strategy:disable
include remove_rsh-client

class remove_rsh-client {
  package { 'rsh-client':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure rsh-client is removed
  package:
    name: rsh-client
    state: absent
  tags:
  - NIST-800-171-3.1.13
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - package_rsh_removed
  - unknown_severity

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove rsh-client
#	   from the system, and may remove any packages
#	   that depend on rsh-client. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "rsh-client"

Rule   Remove Rsh Trust Files   [ref]

The files /etc/hosts.equiv and ~/.rhosts (in each user's home directory) list remote hosts and users that are trusted by the local system when using the rshd daemon. To remove these files, run the following command to delete them from any location: 
$ sudo rm /etc/hosts.equiv
$ rm ~/.rhosts
Rationale:
This action is only meaningful if .rhosts support is permitted through PAM. Trust files are convenient, but when used in conjunction with the R-services, they can allow unauthenticated access to a system.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_no_rsh_trust_files
Identifiers and References

References:  11, 12, 14, 15, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06, CCI-001436, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4, 6.2.11



find /root -xdev -type f -name ".rhosts" -exec rm -f {} \;
find /home -maxdepth 2 -xdev -type f -name ".rhosts" -exec rm -f {} \;
rm -f /etc/hosts.equiv
Group   Chat/Messaging Services   Group contains 1 rule
[ref]   The talk software makes it possible for users to send and receive messages across systems through a terminal session.

Rule   Uninstall talk Package   [ref]

The talk package contains the client program for the Internet talk protocol, which allows the user to chat with other users on different systems. Talk is a communication program which copies lines from one terminal to the terminal of another user. The talk package can be removed with the following command: 
$ apt-get remove talk
Rationale:
The talk software presents a security risk as it uses unencrypted protocols for communications. Removing the talk package decreases the risk of the accidental (or intentional) activation of talk client program.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_talk_removed
Identifiers and References

References:  BP28(R1), 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 2.2.4, 2.3.3


Complexity:low
Disruption:low
Strategy:disable
include remove_talk

class remove_talk {
  package { 'talk':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure talk is removed
  package:
    name: talk
    state: absent
  tags:
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_talk_removed

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove talk
#	   from the system, and may remove any packages
#	   that depend on talk. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "talk"
Group   Telnet   Group contains 1 rule
[ref]   The telnet protocol does not provide confidentiality or integrity for information transmitted on the network. This includes authentication information such as passwords. Organizations which use telnet should be actively working to migrate to a more secure protocol.

Rule   Remove telnet Clients   [ref]

The telnet client allows users to start connections to other systems via the telnet protocol.
Rationale:
The telnet protocol is insecure and unencrypted. The use of an unencrypted transmission medium could allow an unauthorized user to steal credentials. The ssh package provides an encrypted session and stronger security and is included in Ubuntu 20.04.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_package_telnet_removed
Identifiers and References

References:  BP28(R1), 3.1.13, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), A.8.2.3, A.13.1.1, A.13.2.1, A.13.2.3, A.14.1.2, A.14.1.3, 2.2.4, 2.3.4


Complexity:low
Disruption:low
Strategy:disable
include remove_telnet

class remove_telnet {
  package { 'telnet':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure telnet is removed
  package:
    name: telnet
    state: absent
  tags:
  - NIST-800-171-3.1.13
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - package_telnet_removed

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove telnet
#	   from the system, and may remove any packages
#	   that depend on telnet. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "telnet"

Rule   Uninstall rsync Package   [ref]

The rsyncd service can be used to synchronize files between systems over network links. The rsync package can be removed with the following command: 
$ apt-get remove rsync
Rationale:
The rsyncd service presents a security risk as it uses unencrypted protocols for communication.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_package_rsync_removed
Identifiers and References

References:  2.2.16


Complexity:low
Disruption:low
Strategy:disable
include remove_rsync

class remove_rsync {
  package { 'rsync':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure rsync is removed
  package:
    name: rsync
    state: absent
  tags:
  - disable_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - package_rsync_removed

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove rsync
#	   from the system, and may remove any packages
#	   that depend on rsync. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "rsync"
Group   Print Support   Group contains 1 rule
[ref]   The Common Unix Printing System (CUPS) service provides both local and network printing support. A system running the CUPS service can accept print jobs from other systems, process them, and send them to the appropriate printer. It also provides an interface for remote administration through a web browser. The CUPS service is installed and activated by default. The project homepage and more detailed documentation are available at http://www.cups.org.

Rule   Uninstall CUPS Package   [ref]

The cups package can be removed with the following command: 
$ apt-get remove cups
Rationale:
If the system does not need to print jobs or accept print jobs from other systems, it is recommended that CUPS be removed to reduce the potential attack surface.
Severity: 
unknown
Rule ID:xccdf_org.ssgproject.content_rule_package_cups_removed
Identifiers and References

References:  11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7(a), CM-7(b), CM-6(a), PR.IP-1, PR.PT-3, 2.2.4


Complexity:low
Disruption:low
Strategy:disable
include remove_cups

class remove_cups {
  package { 'cups':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure cups is removed
  package:
    name: cups
    state: absent
  tags:
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - package_cups_removed
  - unknown_severity

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove cups
#	   from the system, and may remove any packages
#	   that depend on cups. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "cups"
Group   Proxy Server   Group contains 1 group and 1 rule
[ref]   A proxy server is a very desirable target for a potential adversary because much (or all) sensitive data for a given infrastructure may flow through it. Therefore, if one is required, the system acting as a proxy server should be dedicated to that purpose alone and be stored in a physically secure location. The system's default proxy server software is Squid, and provided in an RPM package of the same name.
Group   Disable Squid if Possible   Group contains 1 rule
[ref]   If Squid was installed and activated, but the system does not need to act as a proxy server, then it should be disabled and removed.

Rule   Uninstall squid Package   [ref]

The squid package can be removed with the following command: 
 $ apt-get remove squid
Rationale:
If there is no need to make the proxy server software available, removing it provides a safeguard against its activation.
Severity: 
unknown
Rule ID:xccdf_org.ssgproject.content_rule_package_squid_removed
Identifiers and References

References:  2.2.13


Complexity:low
Disruption:low
Strategy:disable
include remove_squid

class remove_squid {
  package { 'squid':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure squid is removed
  package:
    name: squid
    state: absent
  tags:
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - package_squid_removed
  - unknown_severity

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove squid
#	   from the system, and may remove any packages
#	   that depend on squid. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "squid"
Group   Samba(SMB) Microsoft Windows File Sharing Server   Group contains 1 group and 1 rule
[ref]   When properly configured, the Samba service allows Linux systems to provide file and print sharing to Microsoft Windows systems. There are two software packages that provide Samba support. The first, samba-client, provides a series of command line tools that enable a client system to access Samba shares. The second, simply labeled samba, provides the Samba service. It is this second package that allows a Linux system to act as an Active Directory server, a domain controller, or as a domain member. Only the samba-client package is installed by default.
Group   Disable Samba if Possible   Group contains 1 rule
[ref]   Even after the Samba server package has been installed, it will remain disabled. Do not enable this service unless it is absolutely necessary to provide Microsoft Windows file and print sharing functionality.

Rule   Uninstall Samba Package   [ref]

The samba package can be removed with the following command: 
 $ apt-get remove samba
Rationale:
If there is no need to make the Samba software available, removing it provides a safeguard against its activation.
Severity: 
unknown
Rule ID:xccdf_org.ssgproject.content_rule_package_samba_removed
Identifiers and References

References:  2.2.4, 2.2.12


Complexity:low
Disruption:low
Strategy:disable
include remove_samba

class remove_samba {
  package { 'samba':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure samba is removed
  package:
    name: samba
    state: absent
  tags:
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - package_samba_removed
  - unknown_severity

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove samba
#	   from the system, and may remove any packages
#	   that depend on samba. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "samba"
Group   SNMP Server   Group contains 1 group and 1 rule
[ref]   The Simple Network Management Protocol allows administrators to monitor the state of network devices, including computers. Older versions of SNMP were well-known for weak security, such as plaintext transmission of the community string (used for authentication) and usage of easily-guessable choices for the community string.
Group   Disable SNMP Server if Possible   Group contains 1 rule
[ref]   The system includes an SNMP daemon that allows for its remote monitoring, though it not installed by default. If it was installed and activated but is not needed, the software should be disabled and removed.

Rule   Uninstall net-snmp Package   [ref]

The snmp package provides the snmpd service. The snmp package can be removed with the following command: 
$ apt-get remove snmp
Rationale:
If there is no need to run SNMP server software, removing the package provides a safeguard against its activation.
Severity: 
unknown
Rule ID:xccdf_org.ssgproject.content_rule_package_net-snmp_removed
Identifiers and References

References:  2.2.4, 2.2.14


Complexity:low
Disruption:low
Strategy:disable
include remove_snmp

class remove_snmp {
  package { 'snmp':
    ensure => 'purged',
  }
}

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure snmp is removed
  package:
    name: snmp
    state: absent
  tags:
  - PCI-DSSv4-2.2.4
  - disable_strategy
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - package_net-snmp_removed
  - unknown_severity

Complexity:low
Disruption:low
Strategy:disable

# CAUTION: This remediation script will remove snmp
#	   from the system, and may remove any packages
#	   that depend on snmp. Execute this
#	   remediation AFTER testing on a non-production
#	   system!

DEBIAN_FRONTEND=noninteractive apt-get remove -y "snmp"
Group   SSH Server   Group contains 1 group and 24 rules
[ref]   The SSH protocol is recommended for remote login and remote file transfer. SSH provides confidentiality and integrity for data exchanged between two systems, as well as server authentication, through the use of public key cryptography. The implementation included with the system is called OpenSSH, and more detailed documentation is available from its website, https://www.openssh.com. Its server program is called sshd and provided by the RPM package openssh-server.
Group   Configure OpenSSH Server if Necessary   Group contains 19 rules
[ref]   If the system needs to act as an SSH server, then certain changes should be made to the OpenSSH daemon configuration file /etc/ssh/sshd_config. The following recommendations can be applied to this file. See the sshd_config(5) man page for more detailed information.

Rule   Set SSH Client Alive Count Max   [ref]

The SSH server sends at most ClientAliveCountMax messages during a SSH session and waits for a response from the SSH client. The option ClientAliveInterval configures timeout after each ClientAliveCountMax message. If the SSH server does not receive a response from the client, then the connection is considered unresponsive and terminated. For SSH earlier than v8.2, a ClientAliveCountMax value of 0 causes a timeout precisely when the ClientAliveInterval is set. Starting with v8.2, a value of 0 disables the timeout functionality completely. If the option is set to a number greater than 0, then the session will be disconnected after ClientAliveInterval * ClientAliveCountMax seconds without receiving a keep alive message.
Rationale:
This ensures a user login will be terminated as soon as the ClientAliveInterval is reached.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sshd_set_keepalive
Identifiers and References

References:  BP28(R29), 1, 12, 13, 14, 15, 16, 18, 3, 5, 7, 8, 5.5.6, APO13.01, BAI03.01, BAI03.02, BAI03.03, DSS01.03, DSS03.05, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.1.11, CCI-000879, CCI-001133, CCI-002361, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 6.2, A.12.4.1, A.12.4.3, A.14.1.1, A.14.2.1, A.14.2.5, A.18.1.4, A.6.1.2, A.6.1.5, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-004-6 R2.2.3, CIP-007-3 R5.1, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, AC-2(5), AC-12, AC-17(a), SC-10, CM-6(a), DE.CM-1, DE.CM-3, PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.IP-2, Req-8.1.8, 8.2.8, SRG-OS-000163-GPOS-00072, SRG-OS-000279-GPOS-00109, UBTU-20-010036, 5.2.15


Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value var_sshd_set_keepalive # promote to variable
  set_fact:
    var_sshd_set_keepalive: !!str 3
  tags:
    - always

- name: Set SSH Client Alive Count Max
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*ClientAliveCountMax\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*ClientAliveCountMax\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*ClientAliveCountMax\s+
      line: ClientAliveCountMax {{ var_sshd_set_keepalive }}
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.5.6
  - DISA-STIG-UBTU-20-010036
  - NIST-800-171-3.1.11
  - NIST-800-53-AC-12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-2(5)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-SC-10
  - PCI-DSS-Req-8.1.8
  - PCI-DSSv4-8.2.8
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_set_keepalive


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_sshd_set_keepalive='3'


if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*ClientAliveCountMax\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "ClientAliveCountMax $var_sshd_set_keepalive" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "ClientAliveCountMax $var_sshd_set_keepalive" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set SSH Client Alive Interval   [ref]

SSH allows administrators to set a network responsiveness timeout interval. After this interval has passed, the unresponsive client will be automatically logged out.

To set this timeout interval, edit the following line in /etc/ssh/sshd_config as follows: 
ClientAliveInterval 300


The timeout interval is given in seconds. For example, have a timeout of 10 minutes, set interval to 600.

If a shorter timeout has already been set for the login shell, that value will preempt any SSH setting made in /etc/ssh/sshd_config. Keep in mind that some processes may stop SSH from correctly detecting that the user is idle.
Warning:  SSH disconnecting unresponsive clients will not have desired effect without also configuring ClientAliveCountMax in the SSH service configuration.
Warning:  Following conditions may prevent the SSH session to time out:
  • Remote processes on the remote machine generates output. As the output has to be transferred over the network to the client, the timeout is reset every time such transfer happens.
  • Any scp or sftp activity by the same user to the host resets the timeout.
Rationale:
Terminating an idle ssh session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been let unattended.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sshd_set_idle_timeout
Identifiers and References

References:  BP28(R29), 1, 12, 13, 14, 15, 16, 18, 3, 5, 7, 8, 5.5.6, APO13.01, BAI03.01, BAI03.02, BAI03.03, DSS01.03, DSS03.05, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.1.11, CCI-000879, CCI-001133, CCI-002361, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 6.2, A.12.4.1, A.12.4.3, A.14.1.1, A.14.2.1, A.14.2.5, A.18.1.4, A.6.1.2, A.6.1.5, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CIP-004-6 R2.2.3, CIP-007-3 R5.1, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, CM-6(a), AC-17(a), AC-2(5), AC-12, AC-17(a), SC-10, CM-6(a), DE.CM-1, DE.CM-3, PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.IP-2, Req-8.1.8, 8.2.8, SRG-OS-000126-GPOS-00066, SRG-OS-000163-GPOS-00072, SRG-OS-000279-GPOS-00109, SRG-OS-000395-GPOS-00175, UBTU-20-010037, 5.2.15


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

sshd_idle_timeout_value='300'


if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*ClientAliveInterval\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "ClientAliveInterval $sshd_idle_timeout_value" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "ClientAliveInterval $sshd_idle_timeout_value" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable Host-Based Authentication   [ref]

SSH's cryptographic host-based authentication is more secure than .rhosts authentication. However, it is not recommended that hosts unilaterally trust one another, even within an organization.
The default SSH configuration disables host-based authentication. The appropriate configuration is used if no value is set for HostbasedAuthentication.
To explicitly disable host-based authentication, add or correct the following line in /etc/ssh/sshd_config: 
HostbasedAuthentication no
Rationale:
SSH trust relationships mean a compromise on one host can allow an attacker to move trivially to other hosts.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_disable_host_auth
Identifiers and References

References:  11, 12, 14, 15, 16, 18, 3, 5, 9, 5.5.6, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.03, DSS06.06, 3.1.12, CCI-000366, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, 0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, AC-3, AC-17(a), CM-7(a), CM-7(b), CM-6(a), PR.AC-4, PR.AC-6, PR.IP-1, PR.PT-3, FIA_UAU.1, 8.3.1, SRG-OS-000480-GPOS-00229, 5.2.8


Complexity:low
Disruption:low
Strategy:restrict
- name: Disable Host-Based Authentication
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*HostbasedAuthentication\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*HostbasedAuthentication\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*HostbasedAuthentication\s+
      line: HostbasedAuthentication no
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.5.6
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-3
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-8.3.1
  - disable_host_auth
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*HostbasedAuthentication\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "HostbasedAuthentication no" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "HostbasedAuthentication no" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable SSH Access via Empty Passwords   [ref]

Disallow SSH login with empty passwords. The default SSH configuration disables logins with empty passwords. The appropriate configuration is used if no value is set for PermitEmptyPasswords.
To explicitly disallow SSH login from accounts with empty passwords, add or correct the following line in /etc/ssh/sshd_config: 
PermitEmptyPasswords no
Any accounts with empty passwords should be disabled immediately, and PAM configuration should prevent users from being able to assign themselves empty passwords.
Rationale:
Configuring this setting for the SSH daemon provides additional assurance that remote login via SSH will require a password, even in the event of misconfiguration elsewhere.
Severity: 
high
Rule ID:xccdf_org.ssgproject.content_rule_sshd_disable_empty_passwords
Identifiers and References

References:  NT007(R17), 11, 12, 13, 14, 15, 16, 18, 3, 5, 9, 5.5.6, APO01.06, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.03, DSS06.06, 3.1.1, 3.1.5, CCI-000366, CCI-000766, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 5.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-17(a), CM-7(a), CM-7(b), CM-6(a), PR.AC-4, PR.AC-6, PR.DS-5, PR.IP-1, PR.PT-3, FIA_UAU.1, Req-2.2.4, 2.2.6, SRG-OS-000106-GPOS-00053, SRG-OS-000480-GPOS-00229, SRG-OS-000480-GPOS-00227, UBTU-20-010047, 5.2.10


Complexity:low
Disruption:low
Strategy:restrict
- name: Disable SSH Access via Empty Passwords
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*PermitEmptyPasswords\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*PermitEmptyPasswords\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*PermitEmptyPasswords\s+
      line: PermitEmptyPasswords no
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.5.6
  - DISA-STIG-UBTU-20-010047
  - NIST-800-171-3.1.1
  - NIST-800-171-3.1.5
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-2.2.4
  - PCI-DSSv4-2.2.6
  - high_severity
  - low_complexity
  - low_disruption
  - no_reboot_needed
  - restrict_strategy
  - sshd_disable_empty_passwords

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*PermitEmptyPasswords\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "PermitEmptyPasswords no" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "PermitEmptyPasswords no" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable SSH Support for .rhosts Files   [ref]

SSH can emulate the behavior of the obsolete rsh command in allowing users to enable insecure access to their accounts via .rhosts files.
The default SSH configuration disables support for .rhosts. The appropriate configuration is used if no value is set for IgnoreRhosts.
To explicitly disable support for .rhosts files, add or correct the following line in /etc/ssh/sshd_config: 
IgnoreRhosts yes
Rationale:
SSH trust relationships mean a compromise on one host can allow an attacker to move trivially to other hosts.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sshd_disable_rhosts
Identifiers and References

References:  11, 12, 14, 15, 16, 18, 3, 5, 9, 5.5.6, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.03, DSS06.06, 3.1.12, CCI-000366, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-17(a), CM-7(a), CM-7(b), CM-6(a), PR.AC-4, PR.AC-6, PR.IP-1, PR.PT-3, FIA_UAU.1, 2.2.6, SRG-OS-000480-GPOS-00227, 5.2.7


Complexity:low
Disruption:low
Strategy:restrict
- name: Disable SSH Support for .rhosts Files
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*IgnoreRhosts\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*IgnoreRhosts\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*IgnoreRhosts\s+
      line: IgnoreRhosts yes
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.5.6
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_disable_rhosts

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*IgnoreRhosts\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "IgnoreRhosts yes" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "IgnoreRhosts yes" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Disable X11 Forwarding   [ref]

The X11Forwarding parameter provides the ability to tunnel X11 traffic through the connection to enable remote graphic connections. SSH has the capability to encrypt remote X11 connections when SSH's X11Forwarding option is enabled.
The default SSH configuration disables X11Forwarding. The appropriate configuration is used if no value is set for X11Forwarding.
To explicitly disable X11 Forwarding, add or correct the following line in /etc/ssh/sshd_config: 
X11Forwarding no
Rationale:
Disable X11 forwarding unless there is an operational requirement to use X11 applications directly. There is a small risk that the remote X11 servers of users who are logged in via SSH with X11 forwarding could be compromised by other users on the X11 server. Note that even if X11 forwarding is disabled, users can always install their own forwarders.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sshd_disable_x11_forwarding
Identifiers and References

References:  CCI-000366, CM-6(b), 2.2.4, SRG-OS-000480-GPOS-00227, UBTU-20-010048, 5.2.5


Complexity:low
Disruption:low
Strategy:restrict
- name: Disable X11 Forwarding
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*X11Forwarding\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*X11Forwarding\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*X11Forwarding\s+
      line: X11Forwarding no
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - DISA-STIG-UBTU-20-010048
  - NIST-800-53-CM-6(b)
  - PCI-DSSv4-2.2.4
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_disable_x11_forwarding

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*X11Forwarding\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "X11Forwarding no" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "X11Forwarding no" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Do Not Allow SSH Environment Options   [ref]

Ensure that users are not able to override environment variables of the SSH daemon.
The default SSH configuration disables environment processing. The appropriate configuration is used if no value is set for PermitUserEnvironment.
To explicitly disable Environment options, add or correct the following /etc/ssh/sshd_config: 
PermitUserEnvironment no
Rationale:
SSH environment options potentially allow users to bypass access restriction in some configurations.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sshd_do_not_permit_user_env
Identifiers and References

References:  11, 3, 9, 5.5.6, BAI10.01, BAI10.02, BAI10.03, BAI10.05, 3.1.12, CCI-000366, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.4.3.2, 4.3.4.3.3, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, AC-17(a), CM-7(a), CM-7(b), CM-6(a), PR.IP-1, Req-2.2.4, 2.2.6, SRG-OS-000480-GPOS-00229, UBTU-20-010047, 5.2.11


Complexity:low
Disruption:low
Strategy:restrict
- name: Do Not Allow SSH Environment Options
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*PermitUserEnvironment\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*PermitUserEnvironment\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*PermitUserEnvironment\s+
      line: PermitUserEnvironment no
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.5.6
  - DISA-STIG-UBTU-20-010047
  - NIST-800-171-3.1.12
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - NIST-800-53-CM-7(a)
  - NIST-800-53-CM-7(b)
  - PCI-DSS-Req-2.2.4
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_do_not_permit_user_env

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*PermitUserEnvironment\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "PermitUserEnvironment no" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "PermitUserEnvironment no" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable PAM   [ref]

UsePAM Enables the Pluggable Authentication Module interface. If set to “yes” this will enable PAM authentication using ChallengeResponseAuthentication and PasswordAuthentication in addition to PAM account and session module processing for all authentication types. To enable PAM authentication, add or correct the following line in /etc/ssh/sshd_config: 
UsePAM yes
Rationale:
When UsePAM is set to yes, PAM runs through account and session types properly. This is important if you want to restrict access to services based off of IP, time or other factors of the account. Additionally, you can make sure users inherit certain environment variables on login or disallow access to the server.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sshd_enable_pam
Identifiers and References

References:  CCI-000877, 2.2.4, SRG-OS-000125-GPOS-00065, UBTU-20-010035, 5.2.19


Complexity:low
Disruption:low
Strategy:restrict
- name: Enable PAM
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*UsePAM\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*UsePAM\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*UsePAM\s+
      line: UsePAM yes
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - DISA-STIG-UBTU-20-010035
  - PCI-DSSv4-2.2.4
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_enable_pam

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*UsePAM\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "UsePAM yes" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "UsePAM yes" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Enable SSH Warning Banner   [ref]

To enable the warning banner and ensure it is consistent across the system, add or correct the following line in /etc/ssh/sshd_config: 
Banner /etc/issue.net
Another section contains information on how to create an appropriate system-wide warning banner.
Rationale:
The warning message reinforces policy awareness during the logon process and facilitates possible legal action against attackers. Alternatively, systems whose ownership should not be obvious should ensure usage of a banner that does not provide easy attribution.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sshd_enable_warning_banner_net
Identifiers and References

References:  5.5.6, DSS05.04, DSS05.10, DSS06.10, 3.1.9, CCI-000048, CCI-000050, CCI-001384, CCI-001385, CCI-001386, CCI-001387, CCI-001388, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, AC-8(a), AC-8(c), AC-17(a), CM-6(a), PR.AC-7, FTA_TAB.1, SRG-OS-000023-GPOS-00006, SRG-OS-000228-GPOS-00088, UBTU-20-010038, 5.2.18


Complexity:low
Disruption:low
Strategy:restrict
- name: Enable SSH Warning Banner
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*Banner\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*Banner\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*Banner\s+
      line: Banner /etc/issue.net
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.5.6
  - DISA-STIG-UBTU-20-010038
  - NIST-800-171-3.1.9
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-8(a)
  - NIST-800-53-AC-8(c)
  - NIST-800-53-CM-6(a)
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_enable_warning_banner_net

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*Banner\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "Banner /etc/issue.net" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "Banner /etc/issue.net" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Limit Users' SSH Access   [ref]

By default, the SSH configuration allows any user with an account to access the system. There are several options available to limit which users and group can access the system via SSH. It is recommended that at least one of the following options be leveraged: - AllowUsers variable gives the system administrator the option of allowing specific users to ssh into the system. The list consists of space separated user names. Numeric user IDs are not recognized with this variable. If a system administrator wants to restrict user access further by specifically allowing a user's access only from a particular host, the entry can be specified in the form of user@host. - AllowGroups variable gives the system administrator the option of allowing specific groups of users to ssh into the system. The list consists of space separated group names. Numeric group IDs are not recognized with this variable. - DenyUsers variable gives the system administrator the option of denying specific users to ssh into the system. The list consists of space separated user names. Numeric user IDs are not recognized with this variable. If a system administrator wants to restrict user access further by specifically denying a user's access from a particular host, the entry can be specified in the form of user@host. - DenyGroups variable gives the system administrator the option of denying specific groups of users to ssh into the system. The list consists of space separated group names. Numeric group IDs are not recognized with this variable.
Rationale:
Specifying which accounts are allowed SSH access into the system reduces the possibility of unauthorized access to the system.
Severity: 
unknown
Rule ID:xccdf_org.ssgproject.content_rule_sshd_limit_user_access
Identifiers and References

References:  11, 12, 14, 15, 16, 18, 3, 5, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.03, DSS06.06, 3.1.12, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.2.3, CIP-004-6 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.2, CIP-007-3 R5.2, CIP-007-3 R5.3.1, CIP-007-3 R5.3.2, CIP-007-3 R5.3.3, AC-3, CM-6(a), PR.AC-4, PR.AC-6, PR.PT-3, Req-2.2.4, 2.2.6, 5.2.17

Rule   Set LogLevel to INFO   [ref]

The INFO parameter specifices that record login and logout activity will be logged.
The default SSH configuration sets the log level to INFO. The appropriate configuration is used if no value is set for LogLevel.
To explicitly specify the log level in SSH, add or correct the following line in /etc/ssh/sshd_config: 
LogLevel INFO
Rationale:
SSH provides several logging levels with varying amounts of verbosity. DEBUG is specifically not recommended other than strictly for debugging SSH communications since it provides so much data that it is difficult to identify important security information. INFO level is the basic level that only records login activity of SSH users. In many situations, such as Incident Response, it is important to determine when a particular user was active on a system. The logout record can eliminate those users who disconnected, which helps narrow the field.
Severity: 
low
Rule ID:xccdf_org.ssgproject.content_rule_sshd_set_loglevel_info
Identifiers and References

References:  AC-17(a), CM-6(a), 5.2.4


Complexity:low
Disruption:low
Strategy:restrict
- name: Set LogLevel to INFO
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*LogLevel\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*LogLevel\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*LogLevel\s+
      line: LogLevel INFO
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-17(a)
  - NIST-800-53-CM-6(a)
  - low_complexity
  - low_disruption
  - low_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_set_loglevel_info

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*LogLevel\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "LogLevel INFO" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "LogLevel INFO" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set SSH authentication attempt limit   [ref]

The MaxAuthTries parameter specifies the maximum number of authentication attempts permitted per connection. Once the number of failures reaches half this value, additional failures are logged. to set MaxAUthTries edit /etc/ssh/sshd_config as follows: 
MaxAuthTries 4
Rationale:
Setting the MaxAuthTries parameter to a low number will minimize the risk of successful brute force attacks to the SSH server.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sshd_set_max_auth_tries
Identifiers and References

References:  0421, 0422, 0431, 0974, 1173, 1401, 1504, 1505, 1546, 1557, 1558, 1559, 1560, 1561, 2.2.6, 5.2.6


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

sshd_max_auth_tries_value='4'


if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*MaxAuthTries\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "MaxAuthTries $sshd_max_auth_tries_value" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "MaxAuthTries $sshd_max_auth_tries_value" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Set SSH MaxSessions limit   [ref]

The MaxSessions parameter specifies the maximum number of open sessions permitted from a given connection. To set MaxSessions edit /etc/ssh/sshd_config as follows: 
MaxSessions 10
Rationale:
To protect a system from denial of service due to a large number of concurrent sessions, use the rate limiting function of MaxSessions to protect availability of sshd logins and prevent overwhelming the daemon.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sshd_set_max_sessions
Identifiers and References

References:  2.2.6, 5.2.22


Complexity:low
Disruption:low
Strategy:configure
- name: XCCDF Value var_sshd_max_sessions # promote to variable
  set_fact:
    var_sshd_max_sessions: !!str 10
  tags:
    - always

- name: Set SSH MaxSessions limit
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*MaxSessions\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*MaxSessions\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*MaxSessions\s+
      line: MaxSessions {{ var_sshd_max_sessions }}
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - sshd_set_max_sessions

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_sshd_max_sessions='10'


if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*MaxSessions\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "MaxSessions $var_sshd_max_sessions" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "MaxSessions $var_sshd_max_sessions" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Ensure SSH MaxStartups is configured   [ref]

The MaxStartups parameter specifies the maximum number of concurrent unauthenticated connections to the SSH daemon. Additional connections will be dropped until authentication succeeds or the LoginGraceTime expires for a connection. To confgure MaxStartups, you should add or correct the following line in the /etc/ssh/sshd_config file: 
MaxStartups 10:30:60
CIS recommends a MaxStartups value of '10:30:60', or more restrictive where dictated by site policy.
Rationale:
To protect a system from denial of service due to a large number of pending authentication connection attempts, use the rate limiting function of MaxStartups to protect availability of sshd logins and prevent overwhelming the daemon.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sshd_set_maxstartups
Identifiers and References

References:  2.2.6, 5.2.21


Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value var_sshd_set_maxstartups # promote to variable
  set_fact:
    var_sshd_set_maxstartups: !!str 10:30:60
  tags:
    - always

- name: Ensure SSH MaxStartups is configured
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*MaxStartups\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*MaxStartups\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*MaxStartups\s+
      line: MaxStartups {{ var_sshd_set_maxstartups }}
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - PCI-DSSv4-2.2.6
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_set_maxstartups

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

var_sshd_set_maxstartups='10:30:60'


if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*MaxStartups\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "MaxStartups $var_sshd_set_maxstartups" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "MaxStartups $var_sshd_set_maxstartups" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Use Only FIPS 140-2 Validated Ciphers   [ref]

Limit the ciphers to those algorithms which are FIPS-approved. Counter (CTR) mode is also preferred over cipher-block chaining (CBC) mode. The following line in /etc/ssh/sshd_config demonstrates use of FIPS-approved ciphers: 
Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc
The man page sshd_config(5) contains a list of supported ciphers. The rule is parametrized to use the following ciphers: aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se.
Warning:  The system needs to be rebooted for these changes to take effect.
Warning:  System Crypto Modules must be provided by a vendor that undergoes FIPS-140 certifications. FIPS-140 is applicable to all Federal agencies that use cryptographic-based security systems to protect sensitive information in computer and telecommunication systems (including voice systems) as defined in Section 5131 of the Information Technology Management Reform Act of 1996, Public Law 104-106. This standard shall be used in designing and implementing cryptographic modules that Federal departments and agencies operate or are operated for them under contract. See https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.140-2.pdf To meet this, the system has to have cryptographic software provided by a vendor that has undergone this certification. This means providing documentation, test results, design information, and independent third party review by an accredited lab. While open source software is capable of meeting this, it does not meet FIPS-140 unless the vendor submits to this process.
Rationale:
Unapproved mechanisms that are used for authentication to the cryptographic module are not verified and therefore cannot be relied upon to provide confidentiality or integrity, and system data may be compromised.
Operating systems utilizing encryption are required to use FIPS-compliant mechanisms for authenticating to cryptographic modules.
FIPS 140-2 is the current standard for validating that mechanisms used to access cryptographic modules utilize authentication that meets industry and government requirements. For government systems, this allows Security Levels 1, 2, 3, or 4 for use on Ubuntu 20.04.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sshd_use_approved_ciphers
Identifiers and References

References:  1, 11, 12, 14, 15, 16, 18, 3, 5, 6, 8, 9, 5.5.6, APO11.04, APO13.01, BAI03.05, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10, MEA02.01, 3.1.13, 3.13.11, 3.13.8, CCI-000068, CCI-000366, CCI-000803, CCI-000877, CCI-002890, CCI-003123, 164.308(b)(1), 164.308(b)(2), 164.312(e)(1), 164.312(e)(2)(i), 164.312(e)(2)(ii), 164.314(b)(2)(i), 4.3.3.2.2, 4.3.3.3.9, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.12.1.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.5.1, A.12.6.2, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.18.1.4, A.6.1.2, A.6.2.1, A.6.2.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CM-6(a), AC-17(a), AC-17(2), SC-13, MA-4(6), IA-5(1)(c), SC-12(2), SC-12(3), PR.AC-1, PR.AC-3, PR.AC-4, PR.AC-6, PR.AC-7, PR.IP-1, PR.PT-1, PR.PT-3, PR.PT-4, 2.2.7, SRG-OS-000033-GPOS-00014, SRG-OS-000120-GPOS-00061, SRG-OS-000125-GPOS-00065, SRG-OS-000250-GPOS-00093, SRG-OS-000393-GPOS-00173, SRG-OS-000394-GPOS-00174, 5.2.12


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

sshd_approved_ciphers='aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc,rijndael-cbc@lysator.liu.se'


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^Ciphers")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$sshd_approved_ciphers"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^Ciphers\\>" "/etc/ssh/sshd_config"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^Ciphers\\>.*/$escaped_formatted_output/gi" "/etc/ssh/sshd_config"
else
    if [[ -s "/etc/ssh/sshd_config" ]] && [[ -n "$(tail -c 1 -- "/etc/ssh/sshd_config" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/ssh/sshd_config"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/ssh/sshd_config"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Use Only FIPS 140-2 Validated MACs   [ref]

Limit the MACs to those hash algorithms which are FIPS-approved. The following line in /etc/ssh/sshd_config demonstrates use of FIPS-approved MACs: 
MACs hmac-sha2-512,hmac-sha2-256,hmac-sha1
The man page sshd_config(5) contains a list of supported MACs. The rule is parametrized to use the following MACs: hmac-sha2-512,hmac-sha2-256,hmac-sha1,hmac-sha1-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com.
Warning:  The system needs to be rebooted for these changes to take effect.
Warning:  System Crypto Modules must be provided by a vendor that undergoes FIPS-140 certifications. FIPS-140 is applicable to all Federal agencies that use cryptographic-based security systems to protect sensitive information in computer and telecommunication systems (including voice systems) as defined in Section 5131 of the Information Technology Management Reform Act of 1996, Public Law 104-106. This standard shall be used in designing and implementing cryptographic modules that Federal departments and agencies operate or are operated for them under contract. See https://nvlpubs.nist.gov/nistpubs/FIPS/NIST.FIPS.140-2.pdf To meet this, the system has to have cryptographic software provided by a vendor that has undergone this certification. This means providing documentation, test results, design information, and independent third party review by an accredited lab. While open source software is capable of meeting this, it does not meet FIPS-140 unless the vendor submits to this process.
Rationale:
DoD Information Systems are required to use FIPS-approved cryptographic hash functions. The only SSHv2 hash algorithms meeting this requirement is SHA2.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sshd_use_approved_macs
Identifiers and References

References:  1, 12, 13, 15, 16, 5, 8, APO01.06, APO13.01, DSS01.04, DSS05.02, DSS05.03, DSS05.04, DSS05.07, DSS06.02, DSS06.03, 3.1.13, 3.13.11, 3.13.8, CCI-000068, CCI-000803, CCI-000877, CCI-001453, CCI-003123, 164.308(b)(1), 164.308(b)(2), 164.312(e)(1), 164.312(e)(2)(i), 164.312(e)(2)(ii), 164.314(b)(2)(i), 4.3.3.5.1, 4.3.3.6.6, SR 1.1, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.6, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.11.2.6, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.6.2.1, A.6.2.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, CM-6(a), AC-17(a), AC-17(2), SC-13, MA-4(6), SC-12(2), SC-12(3), PR.AC-1, PR.AC-3, PR.DS-5, PR.PT-4, 2.2.7, SRG-OS-000125-GPOS-00065, SRG-OS-000250-GPOS-00093, SRG-OS-000394-GPOS-00174, 5.2.13


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

sshd_approved_macs='hmac-sha2-512,hmac-sha2-256,hmac-sha1,hmac-sha1-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com'


# Strip any search characters in the key arg so that the key can be replaced without
# adding any search characters to the config file.
stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "^MACs")

# shellcheck disable=SC2059
printf -v formatted_output "%s %s" "$stripped_key" "$sshd_approved_macs"

# If the key exists, change it. Otherwise, add it to the config_file.
# We search for the key string followed by a word boundary (matched by \>),
# so if we search for 'setting', 'setting2' won't match.
if LC_ALL=C grep -q -m 1 -i -e "^MACs\\>" "/etc/ssh/sshd_config"; then
    escaped_formatted_output=$(sed -e 's|/|\\/|g' <<< "$formatted_output")
    LC_ALL=C sed -i --follow-symlinks "s/^MACs\\>.*/$escaped_formatted_output/gi" "/etc/ssh/sshd_config"
else
    if [[ -s "/etc/ssh/sshd_config" ]] && [[ -n "$(tail -c 1 -- "/etc/ssh/sshd_config" || true)" ]]; then
        LC_ALL=C sed -i --follow-symlinks '$a'\\ "/etc/ssh/sshd_config"
    fi
    printf '%s\n' "$formatted_output" >> "/etc/ssh/sshd_config"
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Use Only Strong Key Exchange algorithms   [ref]

Limit the Key Exchange to strong algorithms. The following line in /etc/ssh/sshd_config demonstrates use of those: 
KexAlgorithms ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256
Rationale:
Key exchange is any method in cryptography by which cryptographic keys are exchanged between two parties, allowing use of a cryptographic algorithm. If the sender and receiver wish to exchange encrypted messages, each must be equipped to encrypt messages to be sent and decrypt messages received
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_sshd_use_strong_kex
Identifiers and References

References:  Req-2.3, 2.2.7, 5.2.14


Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value sshd_strong_kex # promote to variable
  set_fact:
    sshd_strong_kex: !!str ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256
  tags:
    - always

- name: Use Only Strong Key Exchange algorithms
  block:

  - name: Check for duplicate values
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*KexAlgorithms\s+
      state: absent
    check_mode: true
    changed_when: false
    register: dupes

  - name: Deduplicate values from /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: false
      regexp: (?i)^\s*KexAlgorithms\s+
      state: absent
    when: dupes.found is defined and dupes.found > 1

  - name: Insert correct line to /etc/ssh/sshd_config
    lineinfile:
      path: /etc/ssh/sshd_config
      create: true
      regexp: (?i)^\s*KexAlgorithms\s+
      line: KexAlgorithms {{ sshd_strong_kex }}
      state: present
      insertbefore: ^[#\s]*Match
      validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - PCI-DSS-Req-2.3
  - PCI-DSSv4-2.2.7
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy
  - sshd_use_strong_kex

Complexity:low
Disruption:low
Strategy:restrict
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

sshd_strong_kex='ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group14-sha256'


if [ -e "/etc/ssh/sshd_config" ] ; then
    
    LC_ALL=C sed -i "/^\s*KexAlgorithms\s\+/Id" "/etc/ssh/sshd_config"
else
    touch "/etc/ssh/sshd_config"
fi
# make sure file has newline at the end
sed -i -e '$a\' "/etc/ssh/sshd_config"

cp "/etc/ssh/sshd_config" "/etc/ssh/sshd_config.bak"
# Insert before the line matching the regex '^Match'.
line_number="$(LC_ALL=C grep -n "^Match" "/etc/ssh/sshd_config.bak" | LC_ALL=C sed 's/:.*//g')"
if [ -z "$line_number" ]; then
    # There was no match of '^Match', insert at
    # the end of the file.
    printf '%s\n' "KexAlgorithms $sshd_strong_kex" >> "/etc/ssh/sshd_config"
else
    head -n "$(( line_number - 1 ))" "/etc/ssh/sshd_config.bak" > "/etc/ssh/sshd_config"
    printf '%s\n' "KexAlgorithms $sshd_strong_kex" >> "/etc/ssh/sshd_config"
    tail -n "+$(( line_number ))" "/etc/ssh/sshd_config.bak" >> "/etc/ssh/sshd_config"
fi
# Clean up after ourselves.
rm "/etc/ssh/sshd_config.bak"

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Group Who Owns SSH Server config file   [ref]

To properly set the group owner of /etc/ssh/sshd_config, run the command: 
$ sudo chgrp root /etc/ssh/sshd_config
Rationale:
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_groupowner_sshd_config
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-17(a), CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.2.1


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/ssh/sshd_config
  stat:
    path: /etc/ssh/sshd_config
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_groupowner_sshd_config
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure group owner 0 on /etc/ssh/sshd_config
  file:
    path: /etc/ssh/sshd_config
    group: '0'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_groupowner_sshd_config
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chgrp 0 /etc/ssh/sshd_config

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Owner on SSH Server config file   [ref]

To properly set the owner of /etc/ssh/sshd_config, run the command: 
$ sudo chown root /etc/ssh/sshd_config
Rationale:
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_owner_sshd_config
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-17(a), CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, 5.2.1


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/ssh/sshd_config
  stat:
    path: /etc/ssh/sshd_config
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_owner_sshd_config
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure owner 0 on /etc/ssh/sshd_config
  file:
    path: /etc/ssh/sshd_config
    owner: '0'
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - configure_strategy
  - file_owner_sshd_config
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chown 0 /etc/ssh/sshd_config

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Permissions on SSH Server config file   [ref]

To properly set the permissions of /etc/ssh/sshd_config, run the command: 
$ sudo chmod 0600 /etc/ssh/sshd_config
Rationale:
Service configuration files enable or disable features of their respective services that if configured incorrectly can lead to insecure and vulnerable configurations. Therefore, service configuration files should be owned by the correct group to prevent unauthorized changes.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_sshd_config
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-17(a), CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, 2.2.6, SRG-OS-000480-GPOS-00227, 5.2.1


Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /etc/ssh/sshd_config
  stat:
    path: /etc/ssh/sshd_config
  register: file_exists
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_sshd_config
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Ensure permission u-xs,g-xwrs,o-xwrt on /etc/ssh/sshd_config
  file:
    path: /etc/ssh/sshd_config
    mode: u-xs,g-xwrs,o-xwrt
  when:
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - file_exists.stat is defined and file_exists.stat.exists
  tags:
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_sshd_config
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

chmod u-xs,g-xwrs,o-xwrt /etc/ssh/sshd_config

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Permissions on SSH Server Private *_key Key Files   [ref]

SSH server private keys - files that match the /etc/ssh/*_key glob, have to have restricted permissions. If those files are owned by the root user and the root group, they have to have the 0600 permission or stricter.
Rationale:
If an unauthorized user obtains the private SSH host key file, the host could be impersonated.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_sshd_private_key
Identifiers and References

References:  BP28(R36), 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 3.1.13, 3.13.10, CCI-000366, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-17(a), CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-2.2.4, 2.2.6, SRG-OS-000480-GPOS-00227, 5.2.2


include ssh_private_key_perms

class ssh_private_key_perms {
  exec { 'sshd_priv_key':
    command => "chmod 0640 /etc/ssh/*_key",
    path    => '/bin:/usr/bin'
  }
}

Complexity:low
Disruption:low
Strategy:configure
- name: Find root:root-owned keys
  ansible.builtin.command: find -H /etc/ssh/ -maxdepth 1 -user root -regex ".*_key$"
    -type f -group root -perm /u+xs,g+xwrs,o+xwrt
  register: root_owned_keys
  changed_when: false
  failed_when: false
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.13
  - NIST-800-171-3.13.10
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-2.2.4
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_sshd_private_key
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set permissions for root:root-owned keys
  ansible.builtin.file:
    path: '{{ item }}'
    mode: u-xs,g-xwrs,o-xwrt
    state: file
  with_items:
  - '{{ root_owned_keys.stdout_lines }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.13
  - NIST-800-171-3.13.10
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-2.2.4
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_sshd_private_key
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed


# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

for keyfile in /etc/ssh/*_key; do
    test -f "$keyfile" || continue
    if test root:root = "$(stat -c "%U:%G" "$keyfile")"; then
    
	chmod u-xs,g-xwrs,o-xwrt "$keyfile"
    
    
    else
        echo "Key-like file '$keyfile' is owned by an unexpected user:group combination"
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi

Rule   Verify Permissions on SSH Server Public *.pub Key Files   [ref]

To properly set the permissions of /etc/ssh/*.pub, run the command: 
$ sudo chmod 0644 /etc/ssh/*.pub
Rationale:
If a public host key file is modified by an unauthorized user, the SSH service may be compromised.
Severity: 
medium
Rule ID:xccdf_org.ssgproject.content_rule_file_permissions_sshd_pub_key
Identifiers and References

References:  12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 3.1.13, 3.13.10, CCI-000366, 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, CIP-003-8 R5.1.1, CIP-003-8 R5.3, CIP-004-6 R2.3, CIP-007-3 R2.1, CIP-007-3 R2.2, CIP-007-3 R2.3, CIP-007-3 R5.1, CIP-007-3 R5.1.1, CIP-007-3 R5.1.2, AC-17(a), CM-6(a), AC-6(1), PR.AC-4, PR.DS-5, Req-2.2.4, 2.2.6, SRG-OS-000480-GPOS-00227, 5.2.3


include ssh_public_key_perms

class ssh_public_key_perms {
  exec { 'sshd_pub_key':
    command => "chmod 0644 /etc/ssh/*.pub",
    path    => '/bin:/usr/bin'
  }
}

Complexity:low
Disruption:low
Strategy:configure
- name: Find /etc/ssh/ file(s)
  command: find -H /etc/ssh/ -maxdepth 1 -perm /u+xs,g+xws,o+xwt  -type f -regex "^.*\.pub$"
  register: files_found
  changed_when: false
  failed_when: false
  check_mode: false
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.13
  - NIST-800-171-3.13.10
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-2.2.4
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_sshd_pub_key
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

- name: Set permissions for /etc/ssh/ file(s)
  file:
    path: '{{ item }}'
    mode: u-xs,g-xws,o-xwt
    state: file
  with_items:
  - '{{ files_found.stdout_lines }}'
  when: ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - NIST-800-171-3.1.13
  - NIST-800-171-3.13.10
  - NIST-800-53-AC-17(a)
  - NIST-800-53-AC-6(1)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-2.2.4
  - PCI-DSSv4-2.2.6
  - configure_strategy
  - file_permissions_sshd_pub_key
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed

Complexity:low
Disruption:low
Strategy:configure
# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ]; then

find -H /etc/ssh/ -maxdepth 1 -perm /u+xs,g+xws,o+xwt  -type f -regex '^.*\.pub$' -exec chmod u-xs,g-xws,o-xwt {} \;

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi
Red Hat and Red Hat Enterprise Linux are either registered trademarks or trademarks of Red Hat, Inc. in the United States and other countries. All other names are registered trademarks or trademarks of their respective companies.