- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-80666-1
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed
- name: XCCDF Value var_password_pam_unix_remember # promote to variable
  set_fact:
    var_password_pam_unix_remember: !!str 5
  tags:
    - always

- name: Limit Password Reuse - Check if system relies on authselect tool
  ansible.builtin.stat:
    path: /usr/bin/authselect
  register: result_authselect_present
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-80666-1
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Limit Password Reuse - Collect the available authselect features
  ansible.builtin.command:
    cmd: authselect list-features minimal
  register: result_authselect_available_features
  changed_when: false
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  tags:
  - CCE-80666-1
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Limit Password Reuse - Enable pam_pwhistory.so using authselect feature
  block:

  - name: Limit Password Reuse - Check integrity of authselect current profile
    ansible.builtin.command:
      cmd: authselect check
    register: result_authselect_check_cmd
    changed_when: false
    failed_when: false

  - name: Limit Password Reuse - Informative message based on the authselect integrity
      check result
    ansible.builtin.assert:
      that:
      - result_authselect_check_cmd.rc == 0
      fail_msg:
      - authselect integrity check failed. Remediation aborted!
      - This remediation could not be applied because an authselect profile was not
        selected or the selected profile is not intact.
      - It is not recommended to manually edit the PAM files when authselect tool
        is available.
      - In cases where the default authselect profile does not cover a specific demand,
        a custom authselect profile is recommended.
      success_msg:
      - authselect integrity check passed

  - name: Limit Password Reuse - Get authselect current features
    ansible.builtin.shell:
      cmd: authselect current | tail -n+3 | awk '{ print $2 }'
    register: result_authselect_features
    changed_when: false
    when:
    - result_authselect_check_cmd is success

  - name: Limit Password Reuse - Ensure "with-pwhistory" feature is enabled using
      authselect tool
    ansible.builtin.command:
      cmd: authselect enable-feature with-pwhistory
    register: result_authselect_enable_feature_cmd
    when:
    - result_authselect_check_cmd is success
    - result_authselect_features.stdout is not search("with-pwhistory")

  - name: Limit Password Reuse - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_enable_feature_cmd is not skipped
    - result_authselect_enable_feature_cmd is success
  when:
  - '"pam" in ansible_facts.packages'
  - result_authselect_present.stat.exists
  - result_authselect_available_features.stdout is search("with-pwhistory")
  tags:
  - CCE-80666-1
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Limit Password Reuse - Enable pam_pwhistory.so in appropriate PAM files
  block:

  - name: Limit Password Reuse - Define the PAM file to be edited as a local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/system-auth

  - name: Limit Password Reuse - Check if system relies on authselect tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Limit Password Reuse - Ensure authselect custom profile is used if authselect
      is present
    block:

    - name: Limit Password Reuse - Check integrity of authselect current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: Limit Password Reuse - Informative message based on the authselect integrity
        check result
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Limit Password Reuse - Get authselect current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Limit Password Reuse - Define the current authselect profile as a local
        fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Limit Password Reuse - Define the new authselect custom profile as a local
        fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Limit Password Reuse - Get authselect current features to also enable
        them in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Limit Password Reuse - Check if any custom profile with the same name
        was already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: Limit Password Reuse - Create an authselect custom profile based on the
        current profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Limit Password Reuse - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Limit Password Reuse - Ensure the authselect custom profile is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Limit Password Reuse - Restore the authselect features in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Limit Password Reuse - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Limit Password Reuse - Change the PAM file to be edited according to the
        custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: Limit Password Reuse - Check if expected PAM module line is present in {{
      pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+requisite\s+pam_pwhistory.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: Limit Password Reuse - Include or update the PAM module line in {{ pam_file_path
      }}
    block:

    - name: Limit Password Reuse - Check if required PAM module line is present in
        {{ pam_file_path }} with different control
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*password\s+.*\s+pam_pwhistory.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: Limit Password Reuse - Ensure the correct control for the required PAM
        module line in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*password\s+).*(\bpam_pwhistory.so.*)
        replace: \1requisite \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: Limit Password Reuse - Ensure the required PAM module line is included
        in {{ pam_file_path }}
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        insertafter: ^password.*requisite.*pam_pwquality\.so
        line: password    requisite    pam_pwhistory.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: Limit Password Reuse - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present is defined
      - result_authselect_present.stat.exists
      - |-
        (result_pam_module_add is defined and result_pam_module_add.changed)
         or (result_pam_module_edit is defined and result_pam_module_edit.changed)
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0
  when:
  - '"pam" in ansible_facts.packages'
  - |
    (result_authselect_available_features.stdout is defined and result_authselect_available_features.stdout is not search("with-pwhistory")) or result_authselect_available_features is not defined
  tags:
  - CCE-80666-1
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Limit Password Reuse - Check the presence of /etc/security/pwhistory.conf
    file
  ansible.builtin.stat:
    path: /etc/security/pwhistory.conf
  register: result_pwhistory_conf_check
  when: '"pam" in ansible_facts.packages'
  tags:
  - CCE-80666-1
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Limit Password Reuse - pam_pwhistory.so parameters are configured in /etc/security/pwhistory.conf
    file
  block:

  - name: Limit Password Reuse - Ensure the pam_pwhistory.so remember parameter in
      /etc/security/pwhistory.conf
    ansible.builtin.lineinfile:
      path: /etc/security/pwhistory.conf
      regexp: ^\s*remember\s*=
      line: remember = {{ var_password_pam_unix_remember }}
      state: present

  - name: Limit Password Reuse - Ensure the pam_pwhistory.so remember parameter is
      removed from PAM files
    block:

    - name: Limit Password Reuse - Check if /etc/pam.d/system-auth file is present
      ansible.builtin.stat:
        path: /etc/pam.d/system-auth
      register: result_pam_file_present

    - name: Limit Password Reuse - Check the proper remediation for the system
      block:

      - name: Limit Password Reuse - Define the PAM file to be edited as a local fact
        ansible.builtin.set_fact:
          pam_file_path: /etc/pam.d/system-auth

      - name: Limit Password Reuse - Check if system relies on authselect tool
        ansible.builtin.stat:
          path: /usr/bin/authselect
        register: result_authselect_present

      - name: Limit Password Reuse - Ensure authselect custom profile is used if authselect
          is present
        block:

        - name: Limit Password Reuse - Check integrity of authselect current profile
          ansible.builtin.command:
            cmd: authselect check
          register: result_authselect_check_cmd
          changed_when: false
          failed_when: false

        - name: Limit Password Reuse - Informative message based on the authselect
            integrity check result
          ansible.builtin.assert:
            that:
            - result_authselect_check_cmd.rc == 0
            fail_msg:
            - authselect integrity check failed. Remediation aborted!
            - This remediation could not be applied because an authselect profile
              was not selected or the selected profile is not intact.
            - It is not recommended to manually edit the PAM files when authselect
              tool is available.
            - In cases where the default authselect profile does not cover a specific
              demand, a custom authselect profile is recommended.
            success_msg:
            - authselect integrity check passed

        - name: Limit Password Reuse - Get authselect current profile
          ansible.builtin.shell:
            cmd: authselect current -r | awk '{ print $1 }'
          register: result_authselect_profile
          changed_when: false
          when:
          - result_authselect_check_cmd is success

        - name: Limit Password Reuse - Define the current authselect profile as a
            local fact
          ansible.builtin.set_fact:
            authselect_current_profile: '{{ result_authselect_profile.stdout }}'
            authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
          when:
          - result_authselect_profile is not skipped
          - result_authselect_profile.stdout is match("custom/")

        - name: Limit Password Reuse - Define the new authselect custom profile as
            a local fact
          ansible.builtin.set_fact:
            authselect_current_profile: '{{ result_authselect_profile.stdout }}'
            authselect_custom_profile: custom/hardening
          when:
          - result_authselect_profile is not skipped
          - result_authselect_profile.stdout is not match("custom/")

        - name: Limit Password Reuse - Get authselect current features to also enable
            them in the custom profile
          ansible.builtin.shell:
            cmd: authselect current | tail -n+3 | awk '{ print $2 }'
          register: result_authselect_features
          changed_when: false
          when:
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")

        - name: Limit Password Reuse - Check if any custom profile with the same name
            was already created
          ansible.builtin.stat:
            path: /etc/authselect/{{ authselect_custom_profile }}
          register: result_authselect_custom_profile_present
          changed_when: false
          when:
          - authselect_current_profile is not match("custom/")

        - name: Limit Password Reuse - Create an authselect custom profile based on
            the current profile
          ansible.builtin.command:
            cmd: authselect create-profile hardening -b {{ authselect_current_profile
              }}
          when:
          - result_authselect_check_cmd is success
          - authselect_current_profile is not match("custom/")
          - not result_authselect_custom_profile_present.stat.exists

        - name: Limit Password Reuse - Ensure authselect changes are applied
          ansible.builtin.command:
            cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")
          - authselect_custom_profile is not match(authselect_current_profile)

        - name: Limit Password Reuse - Ensure the authselect custom profile is selected
          ansible.builtin.command:
            cmd: authselect select {{ authselect_custom_profile }}
          register: result_pam_authselect_select_profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - authselect_current_profile is not match("custom/")
          - authselect_custom_profile is not match(authselect_current_profile)

        - name: Limit Password Reuse - Restore the authselect features in the custom
            profile
          ansible.builtin.command:
            cmd: authselect enable-feature {{ item }}
          loop: '{{ result_authselect_features.stdout_lines }}'
          register: result_pam_authselect_restore_features
          when:
          - result_authselect_profile is not skipped
          - result_authselect_features is not skipped
          - result_pam_authselect_select_profile is not skipped

        - name: Limit Password Reuse - Ensure authselect changes are applied
          ansible.builtin.command:
            cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
          when:
          - result_authselect_check_cmd is success
          - result_authselect_profile is not skipped
          - result_pam_authselect_restore_features is not skipped

        - name: Limit Password Reuse - Change the PAM file to be edited according
            to the custom authselect profile
          ansible.builtin.set_fact:
            pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
              | basename }}
        when:
        - result_authselect_present.stat.exists

      - name: Limit Password Reuse - Ensure the "remember" option from "pam_pwhistory.so"
          is not present in {{ pam_file_path }}
        ansible.builtin.replace:
          dest: '{{ pam_file_path }}'
          regexp: (.*password.*pam_pwhistory.so.*)\bremember\b=?[0-9a-zA-Z]*(.*)
          replace: \1\2
        register: result_pam_option_removal

      - name: Limit Password Reuse - Ensure authselect changes are applied
        ansible.builtin.command:
          cmd: authselect apply-changes -b
        when:
        - result_authselect_present.stat.exists
        - result_pam_option_removal is changed
      when:
      - result_pam_file_present.stat.exists
  when:
  - '"pam" in ansible_facts.packages'
  - result_pwhistory_conf_check.stat.exists
  tags:
  - CCE-80666-1
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

- name: Limit Password Reuse - pam_pwhistory.so parameters are configured in PAM files
  block:

  - name: Limit Password Reuse - Define the PAM file to be edited as a local fact
    ansible.builtin.set_fact:
      pam_file_path: /etc/pam.d/system-auth

  - name: Limit Password Reuse - Check if system relies on authselect tool
    ansible.builtin.stat:
      path: /usr/bin/authselect
    register: result_authselect_present

  - name: Limit Password Reuse - Ensure authselect custom profile is used if authselect
      is present
    block:

    - name: Limit Password Reuse - Check integrity of authselect current profile
      ansible.builtin.command:
        cmd: authselect check
      register: result_authselect_check_cmd
      changed_when: false
      failed_when: false

    - name: Limit Password Reuse - Informative message based on the authselect integrity
        check result
      ansible.builtin.assert:
        that:
        - result_authselect_check_cmd.rc == 0
        fail_msg:
        - authselect integrity check failed. Remediation aborted!
        - This remediation could not be applied because an authselect profile was
          not selected or the selected profile is not intact.
        - It is not recommended to manually edit the PAM files when authselect tool
          is available.
        - In cases where the default authselect profile does not cover a specific
          demand, a custom authselect profile is recommended.
        success_msg:
        - authselect integrity check passed

    - name: Limit Password Reuse - Get authselect current profile
      ansible.builtin.shell:
        cmd: authselect current -r | awk '{ print $1 }'
      register: result_authselect_profile
      changed_when: false
      when:
      - result_authselect_check_cmd is success

    - name: Limit Password Reuse - Define the current authselect profile as a local
        fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: '{{ result_authselect_profile.stdout }}'
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is match("custom/")

    - name: Limit Password Reuse - Define the new authselect custom profile as a local
        fact
      ansible.builtin.set_fact:
        authselect_current_profile: '{{ result_authselect_profile.stdout }}'
        authselect_custom_profile: custom/hardening
      when:
      - result_authselect_profile is not skipped
      - result_authselect_profile.stdout is not match("custom/")

    - name: Limit Password Reuse - Get authselect current features to also enable
        them in the custom profile
      ansible.builtin.shell:
        cmd: authselect current | tail -n+3 | awk '{ print $2 }'
      register: result_authselect_features
      changed_when: false
      when:
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")

    - name: Limit Password Reuse - Check if any custom profile with the same name
        was already created
      ansible.builtin.stat:
        path: /etc/authselect/{{ authselect_custom_profile }}
      register: result_authselect_custom_profile_present
      changed_when: false
      when:
      - authselect_current_profile is not match("custom/")

    - name: Limit Password Reuse - Create an authselect custom profile based on the
        current profile
      ansible.builtin.command:
        cmd: authselect create-profile hardening -b {{ authselect_current_profile
          }}
      when:
      - result_authselect_check_cmd is success
      - authselect_current_profile is not match("custom/")
      - not result_authselect_custom_profile_present.stat.exists

    - name: Limit Password Reuse - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=before-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Limit Password Reuse - Ensure the authselect custom profile is selected
      ansible.builtin.command:
        cmd: authselect select {{ authselect_custom_profile }}
      register: result_pam_authselect_select_profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - authselect_current_profile is not match("custom/")
      - authselect_custom_profile is not match(authselect_current_profile)

    - name: Limit Password Reuse - Restore the authselect features in the custom profile
      ansible.builtin.command:
        cmd: authselect enable-feature {{ item }}
      loop: '{{ result_authselect_features.stdout_lines }}'
      register: result_pam_authselect_restore_features
      when:
      - result_authselect_profile is not skipped
      - result_authselect_features is not skipped
      - result_pam_authselect_select_profile is not skipped

    - name: Limit Password Reuse - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b --backup=after-hardening-custom-profile
      when:
      - result_authselect_check_cmd is success
      - result_authselect_profile is not skipped
      - result_pam_authselect_restore_features is not skipped

    - name: Limit Password Reuse - Change the PAM file to be edited according to the
        custom authselect profile
      ansible.builtin.set_fact:
        pam_file_path: /etc/authselect/{{ authselect_custom_profile }}/{{ pam_file_path
          | basename }}
    when:
    - result_authselect_present.stat.exists

  - name: Limit Password Reuse - Check if expected PAM module line is present in {{
      pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+requisite\s+pam_pwhistory.so\s*.*
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_line_present

  - name: Limit Password Reuse - Include or update the PAM module line in {{ pam_file_path
      }}
    block:

    - name: Limit Password Reuse - Check if required PAM module line is present in
        {{ pam_file_path }} with different control
      ansible.builtin.lineinfile:
        path: '{{ pam_file_path }}'
        regexp: ^\s*password\s+.*\s+pam_pwhistory.so\s*
        state: absent
      check_mode: true
      changed_when: false
      register: result_pam_line_other_control_present

    - name: Limit Password Reuse - Ensure the correct control for the required PAM
        module line in {{ pam_file_path }}
      ansible.builtin.replace:
        dest: '{{ pam_file_path }}'
        regexp: ^(\s*password\s+).*(\bpam_pwhistory.so.*)
        replace: \1requisite \2
      register: result_pam_module_edit
      when:
      - result_pam_line_other_control_present.found == 1

    - name: Limit Password Reuse - Ensure the required PAM module line is included
        in {{ pam_file_path }}
      ansible.builtin.lineinfile:
        dest: '{{ pam_file_path }}'
        line: password    requisite    pam_pwhistory.so
      register: result_pam_module_add
      when:
      - result_pam_line_other_control_present.found == 0 or result_pam_line_other_control_present.found
        > 1

    - name: Limit Password Reuse - Ensure authselect changes are applied
      ansible.builtin.command:
        cmd: authselect apply-changes -b
      when:
      - result_authselect_present is defined
      - result_authselect_present.stat.exists
      - |-
        (result_pam_module_add is defined and result_pam_module_add.changed)
         or (result_pam_module_edit is defined and result_pam_module_edit.changed)
    when:
    - result_pam_line_present.found is defined
    - result_pam_line_present.found == 0

  - name: Limit Password Reuse - Check if the required PAM module option is present
      in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      regexp: ^\s*password\s+requisite\s+pam_pwhistory.so\s*.*\sremember\b
      state: absent
    check_mode: true
    changed_when: false
    register: result_pam_module_remember_option_present

  - name: Limit Password Reuse - Ensure the "remember" PAM option for "pam_pwhistory.so"
      is included in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*password\s+requisite\s+pam_pwhistory.so.*)
      line: \1 remember={{ var_password_pam_unix_remember }}
      state: present
    register: result_pam_remember_add
    when:
    - result_pam_module_remember_option_present.found == 0

  - name: Limit Password Reuse - Ensure the required value for "remember" PAM option
      from "pam_pwhistory.so" in {{ pam_file_path }}
    ansible.builtin.lineinfile:
      path: '{{ pam_file_path }}'
      backrefs: true
      regexp: ^(\s*password\s+requisite\s+pam_pwhistory.so\s+.*)(remember)=[0-9a-zA-Z]+\s*(.*)
      line: \1\2={{ var_password_pam_unix_remember }} \3
    register: result_pam_remember_edit
    when:
    - result_pam_module_remember_option_present.found > 0

  - name: Limit Password Reuse - Ensure authselect changes are applied
    ansible.builtin.command:
      cmd: authselect apply-changes -b
    when:
    - result_authselect_present.stat.exists
    - (result_pam_remember_add is defined and result_pam_remember_add.changed) or
      (result_pam_remember_edit is defined and result_pam_remember_edit.changed)
  when:
  - '"pam" in ansible_facts.packages'
  - not result_pwhistory_conf_check.stat.exists
  tags:
  - CCE-80666-1
  - CJIS-5.6.2.1.1
  - NIST-800-171-3.5.8
  - NIST-800-53-IA-5(1)(e)
  - NIST-800-53-IA-5(f)
  - PCI-DSS-Req-8.2.5
  - PCI-DSSv4-8.3.7
  - accounts_password_pam_unix_remember
  - configure_strategy
  - low_complexity
  - medium_disruption
  - medium_severity
  - no_reboot_needed

# Remediation is applicable only in certain platforms
if rpm --quiet -q pam; then

var_password_pam_unix_remember='5'


if [ -f /usr/bin/authselect ]; then
    if authselect list-features minimal | grep -q with-pwhistory; then
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi
        authselect enable-feature with-pwhistory

        authselect apply-changes -b
    else
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
        if ! grep -qP '^\s*password\s+'"requisite"'\s+pam_pwhistory.so\s*.*' "$PAM_FILE_PATH"; then
            # Line matching group + control + module was not found. Check group + module.
            if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
                # The control is updated only if one single line matches.
                sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"requisite"' \2/' "$PAM_FILE_PATH"
            else
                LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "$PAM_FILE_PATH" | tail -n 1 | cut -d: -f 1)
                if [ ! -z $LAST_MATCH_LINE ]; then
                    sed -i --follow-symlinks $LAST_MATCH_LINE' a password     '"requisite"'    pam_pwhistory.so' "$PAM_FILE_PATH"
                else
                    echo 'password    '"requisite"'    pam_pwhistory.so' >> "$PAM_FILE_PATH"
                fi
            fi
        fi
    fi
else
    if ! grep -qP '^\s*password\s+'"requisite"'\s+pam_pwhistory.so\s*.*' "/etc/pam.d/system-auth"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "/etc/pam.d/system-auth")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"requisite"' \2/' "/etc/pam.d/system-auth"
        else
            LAST_MATCH_LINE=$(grep -nP "^password.*requisite.*pam_pwquality\.so" "/etc/pam.d/system-auth" | tail -n 1 | cut -d: -f 1)
            if [ ! -z $LAST_MATCH_LINE ]; then
                sed -i --follow-symlinks $LAST_MATCH_LINE' a password     '"requisite"'    pam_pwhistory.so' "/etc/pam.d/system-auth"
            else
                echo 'password    '"requisite"'    pam_pwhistory.so' >> "/etc/pam.d/system-auth"
            fi
        fi
    fi
fi

PWHISTORY_CONF="/etc/security/pwhistory.conf"
if [ -f $PWHISTORY_CONF ]; then
    regex="^\s*remember\s*="
    line="remember = $var_password_pam_unix_remember"
    if ! grep -q $regex $PWHISTORY_CONF; then
        echo $line >> $PWHISTORY_CONF
    else
        sed -i --follow-symlinks 's|^\s*\(remember\s*=\s*\)\(\S\+\)|\1'"$var_password_pam_unix_remember"'|g' $PWHISTORY_CONF
    fi
    if [ -e "/etc/pam.d/system-auth" ] ; then
        PAM_FILE_PATH="/etc/pam.d/system-auth"
        if [ -f /usr/bin/authselect ]; then
            
            if ! authselect check; then
            echo "
            authselect integrity check failed. Remediation aborted!
            This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
            It is not recommended to manually edit the PAM files when authselect tool is available.
            In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
            exit 1
            fi

            CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
            # If not already in use, a custom profile is created preserving the enabled features.
            if [[ ! $CURRENT_PROFILE == custom/* ]]; then
                ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
                authselect create-profile hardening -b $CURRENT_PROFILE
                CURRENT_PROFILE="custom/hardening"
                
                authselect apply-changes -b --backup=before-hardening-custom-profile
                authselect select $CURRENT_PROFILE
                for feature in $ENABLED_FEATURES; do
                    authselect enable-feature $feature;
                done
                
                authselect apply-changes -b --backup=after-hardening-custom-profile
            fi
            PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
            PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

            authselect apply-changes -b
        fi
        
    if grep -qP '^\s*password\s.*\bpam_pwhistory.so\s.*\bremember\b' "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks 's/(.*password.*pam_pwhistory.so.*)\bremember\b=?[[:alnum:]]*(.*)/\1\2/g' "$PAM_FILE_PATH"
    fi
        if [ -f /usr/bin/authselect ]; then
            
            authselect apply-changes -b
        fi
    else
        echo "/etc/pam.d/system-auth was not found" >&2
    fi
else
    PAM_FILE_PATH="/etc/pam.d/system-auth"
    if [ -f /usr/bin/authselect ]; then
        
        if ! authselect check; then
        echo "
        authselect integrity check failed. Remediation aborted!
        This remediation could not be applied because an authselect profile was not selected or the selected profile is not intact.
        It is not recommended to manually edit the PAM files when authselect tool is available.
        In cases where the default authselect profile does not cover a specific demand, a custom authselect profile is recommended."
        exit 1
        fi

        CURRENT_PROFILE=$(authselect current -r | awk '{ print $1 }')
        # If not already in use, a custom profile is created preserving the enabled features.
        if [[ ! $CURRENT_PROFILE == custom/* ]]; then
            ENABLED_FEATURES=$(authselect current | tail -n+3 | awk '{ print $2 }')
            authselect create-profile hardening -b $CURRENT_PROFILE
            CURRENT_PROFILE="custom/hardening"
            
            authselect apply-changes -b --backup=before-hardening-custom-profile
            authselect select $CURRENT_PROFILE
            for feature in $ENABLED_FEATURES; do
                authselect enable-feature $feature;
            done
            
            authselect apply-changes -b --backup=after-hardening-custom-profile
        fi
        PAM_FILE_NAME=$(basename "/etc/pam.d/system-auth")
        PAM_FILE_PATH="/etc/authselect/$CURRENT_PROFILE/$PAM_FILE_NAME"

        authselect apply-changes -b
    fi
    if ! grep -qP '^\s*password\s+'"requisite"'\s+pam_pwhistory.so\s*.*' "$PAM_FILE_PATH"; then
        # Line matching group + control + module was not found. Check group + module.
        if [ "$(grep -cP '^\s*password\s+.*\s+pam_pwhistory.so\s*' "$PAM_FILE_PATH")" -eq 1 ]; then
            # The control is updated only if one single line matches.
            sed -i -E --follow-symlinks 's/^(\s*password\s+).*(\bpam_pwhistory.so.*)/\1'"requisite"' \2/' "$PAM_FILE_PATH"
        else
            echo 'password    '"requisite"'    pam_pwhistory.so' >> "$PAM_FILE_PATH"
        fi
    fi
    # Check the option
    if ! grep -qP '^\s*password\s+'"requisite"'\s+pam_pwhistory.so\s*.*\sremember\b' "$PAM_FILE_PATH"; then
        sed -i -E --follow-symlinks '/\s*password\s+'"requisite"'\s+pam_pwhistory.so.*/ s/$/ remember='"$var_password_pam_unix_remember"'/' "$PAM_FILE_PATH"
    else
        sed -i -E --follow-symlinks 's/(\s*password\s+'"requisite"'\s+pam_pwhistory.so\s+.*)('"remember"'=)[[:alnum:]]+\s*(.*)/\1\2'"$var_password_pam_unix_remember"' \3/' "$PAM_FILE_PATH"
    fi
    if [ -f /usr/bin/authselect ]; then
        
        authselect apply-changes -b
    fi
fi

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi