---
apiVersion: machineconfiguration.openshift.io/v1
kind: MachineConfig
spec:
  config:
    ignition:
      version: 3.1.0
    storage:
      files:
      - contents:
          source: data:,{{ -a%20always%2Cexit%20-F%20arch%3Db64%20-S%20adjtimex%20-k%20audit_time_rules%0A-a%20always%2Cexit%20-F%20arch%3Db32%20-S%20adjtimex%20-k%20audit_time_rules%0A }}
        mode: 0600
        path: /etc/audit/rules.d/75-syscall-adjtimex.rules
        overwrite: true

- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CCE-27290-6
  - CJIS-5.4.1.1
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.4.2.b
  - PCI-DSSv4-10.6.3
  - audit_rules_time_adjtimex
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Set architecture for audit tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CCE-27290-6
  - CJIS-5.4.1.1
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.4.2.b
  - PCI-DSSv4-10.6.3
  - audit_rules_time_adjtimex
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for adjtimex for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - adjtimex
      syscall_grouping:
      - adjtimex
      - settimeofday
      - stime

  - name: Check existence of adjtimex in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/audit_time_rules.rules
    set_fact: audit_file="/etc/audit/rules.d/audit_time_rules.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F key=audit_time_rules
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - adjtimex
      syscall_grouping:
      - adjtimex
      - settimeofday
      - stime

  - name: Check existence of adjtimex in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F key=audit_time_rules
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CCE-27290-6
  - CJIS-5.4.1.1
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.4.2.b
  - PCI-DSSv4-10.6.3
  - audit_rules_time_adjtimex
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

- name: Perform remediation of Audit rules for adjtimex for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - adjtimex
      syscall_grouping:
      - adjtimex
      - settimeofday

  - name: Check existence of adjtimex in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/audit_time_rules.rules
    set_fact: audit_file="/etc/audit/rules.d/audit_time_rules.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F key=audit_time_rules
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - adjtimex
      syscall_grouping:
      - adjtimex
      - settimeofday
      - stime

  - name: Check existence of adjtimex in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F key=audit_time_rules
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CCE-27290-6
  - CJIS-5.4.1.1
  - NIST-800-171-3.1.7
  - NIST-800-53-AC-6(9)
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.4.2.b
  - PCI-DSSv4-10.6.3
  - audit_rules_time_adjtimex
  - low_complexity
  - low_disruption
  - medium_severity
  - no_reboot_needed
  - restrict_strategy

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
    # Create expected audit group and audit rule form for particular system call & architecture
    if [ ${ARCH} = "b32" ]
    then
        ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
        # stime system call is known at 32-bit arch (see e.g "$ ausyscall i386 stime" 's output)
        # so append it to the list of time group system calls to be audited
        SYSCALL="adjtimex settimeofday stime"
        SYSCALL_GROUPING="adjtimex settimeofday stime"
    elif [ ${ARCH} = "b64" ]
    then
        ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
        # stime system call isn't known at 64-bit arch (see "$ ausyscall x86_64 stime" 's output)
        # therefore don't add it to the list of time group system calls to be audited
        SYSCALL="adjtimex settimeofday"
        SYSCALL_GROUPING="adjtimex settimeofday"
    fi
    OTHER_FILTERS=""
    AUID_FILTERS=""
    KEY="audit_time_rules"
    # Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
    unset syscall_a
    unset syscall_grouping
    unset syscall_string
    unset syscall
    unset file_to_edit
    unset rule_to_edit
    unset rule_syscalls_to_edit
    unset other_string
    unset auid_string
    unset full_rule

    # Load macro arguments into arrays
    read -a syscall_a <<< $SYSCALL
    read -a syscall_grouping <<< $SYSCALL_GROUPING

    # Create a list of audit *.rules files that should be inspected for presence and correctness
    # of a particular audit rule. The scheme is as follows:
    #
    # -----------------------------------------------------------------------------------------
    #  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
    # -----------------------------------------------------------------------------------------
    #        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
    # -----------------------------------------------------------------------------------------
    #        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
    #        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
    # -----------------------------------------------------------------------------------------
    #
    files_to_inspect=()


    # If audit tool is 'augenrules', then check if the audit rule is defined
    # If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
    # If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
    default_file="/etc/audit/rules.d/$KEY.rules"
    # As other_filters may include paths, lets use a different delimiter for it
    # The "F" script expression tells sed to print the filenames where the expressions matched
    readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
    # Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
    if [ ${#files_to_inspect[@]} -eq "0" ]
    then
        file_to_inspect="/etc/audit/rules.d/$KEY.rules"
        files_to_inspect=("$file_to_inspect")
        if [ ! -e "$file_to_inspect" ]
        then
            touch "$file_to_inspect"
            chmod 0640 "$file_to_inspect"
        fi
    fi

    # After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
    skip=1

    for audit_file in "${files_to_inspect[@]}"
    do
        # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
        # i.e, collect rules that match:
        # * the action, list and arch, (2-nd argument)
        # * the other filters, (3-rd argument)
        # * the auid filters, (4-rd argument)
        readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

        candidate_rules=()
        # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
        for s_rule in "${similar_rules[@]}"
        do
            # Strip all the options and fields we know of,
            # than check if there was any field left over
            extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
            grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
        done

        if [[ ${#syscall_a[@]} -ge 1 ]]
        then
            # Check if the syscall we want is present in any of the similar existing rules
            for rule in "${candidate_rules[@]}"
            do
                rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
                all_syscalls_found=0
                for syscall in "${syscall_a[@]}"
                do
                    grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                       # A syscall was not found in the candidate rule
                       all_syscalls_found=1
                       }
                done
                if [[ $all_syscalls_found -eq 0 ]]
                then
                    # We found a rule with all the syscall(s) we want; skip rest of macro
                    skip=0
                    break
                fi

                # Check if this rule can be grouped with our target syscall and keep track of it
                for syscall_g in "${syscall_grouping[@]}"
                do
                    if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                    then
                        file_to_edit=${audit_file}
                        rule_to_edit=${rule}
                        rule_syscalls_to_edit=${rule_syscalls}
                    fi
                done
            done
        else
            # If there is any candidate rule, it is compliant; skip rest of macro
            if [ "${#candidate_rules[@]}" -gt 0 ]
            then
                skip=0
            fi
        fi

        if [ "$skip" -eq 0 ]; then
            break
        fi
    done

    if [ "$skip" -ne 0 ]; then
        # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
        # At this point we know if we need to either append the $full_rule or group
        # the syscall together with an exsiting rule

        # Append the full_rule if it cannot be grouped to any other rule
        if [ -z ${rule_to_edit+x} ]
        then
            # Build full_rule while avoid adding double spaces when other_filters is empty
            if [ "${#syscall_a[@]}" -gt 0 ]
            then
                syscall_string=""
                for syscall in "${syscall_a[@]}"
                do
                    syscall_string+=" -S $syscall"
                done
            fi
            other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
            auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
            full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
            echo "$full_rule" >> "$default_file"
            chmod o-rwx ${default_file}
        else
            # Check if the syscalls are declared as a comma separated list or
            # as multiple -S parameters
            if grep -q -- "," <<< "${rule_syscalls_to_edit}"
            then
                delimiter=","
            else
                delimiter=" -S "
            fi
            new_grouped_syscalls="${rule_syscalls_to_edit}"
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
                   # A syscall was not found in the candidate rule
                   new_grouped_syscalls+="${delimiter}${syscall}"
                   }
            done

            # Group the syscall in the rule
            sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
        fi
    fi
    unset syscall_a
    unset syscall_grouping
    unset syscall_string
    unset syscall
    unset file_to_edit
    unset rule_to_edit
    unset rule_syscalls_to_edit
    unset other_string
    unset auid_string
    unset full_rule

    # Load macro arguments into arrays
    read -a syscall_a <<< $SYSCALL
    read -a syscall_grouping <<< $SYSCALL_GROUPING

    # Create a list of audit *.rules files that should be inspected for presence and correctness
    # of a particular audit rule. The scheme is as follows:
    #
    # -----------------------------------------------------------------------------------------
    #  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
    # -----------------------------------------------------------------------------------------
    #        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
    # -----------------------------------------------------------------------------------------
    #        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
    #        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
    # -----------------------------------------------------------------------------------------
    #
    files_to_inspect=()



    # If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
    # file to the list of files to be inspected
    default_file="/etc/audit/audit.rules"
    files_to_inspect+=('/etc/audit/audit.rules' )

    # After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
    skip=1

    for audit_file in "${files_to_inspect[@]}"
    do
        # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
        # i.e, collect rules that match:
        # * the action, list and arch, (2-nd argument)
        # * the other filters, (3-rd argument)
        # * the auid filters, (4-rd argument)
        readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

        candidate_rules=()
        # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
        for s_rule in "${similar_rules[@]}"
        do
            # Strip all the options and fields we know of,
            # than check if there was any field left over
            extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
            grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
        done

        if [[ ${#syscall_a[@]} -ge 1 ]]
        then
            # Check if the syscall we want is present in any of the similar existing rules
            for rule in "${candidate_rules[@]}"
            do
                rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
                all_syscalls_found=0
                for syscall in "${syscall_a[@]}"
                do
                    grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                       # A syscall was not found in the candidate rule
                       all_syscalls_found=1
                       }
                done
                if [[ $all_syscalls_found -eq 0 ]]
                then
                    # We found a rule with all the syscall(s) we want; skip rest of macro
                    skip=0
                    break
                fi

                # Check if this rule can be grouped with our target syscall and keep track of it
                for syscall_g in "${syscall_grouping[@]}"
                do
                    if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                    then
                        file_to_edit=${audit_file}
                        rule_to_edit=${rule}
                        rule_syscalls_to_edit=${rule_syscalls}
                    fi
                done
            done
        else
            # If there is any candidate rule, it is compliant; skip rest of macro
            if [ "${#candidate_rules[@]}" -gt 0 ]
            then
                skip=0
            fi
        fi

        if [ "$skip" -eq 0 ]; then
            break
        fi
    done

    if [ "$skip" -ne 0 ]; then
        # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
        # At this point we know if we need to either append the $full_rule or group
        # the syscall together with an exsiting rule

        # Append the full_rule if it cannot be grouped to any other rule
        if [ -z ${rule_to_edit+x} ]
        then
            # Build full_rule while avoid adding double spaces when other_filters is empty
            if [ "${#syscall_a[@]}" -gt 0 ]
            then
                syscall_string=""
                for syscall in "${syscall_a[@]}"
                do
                    syscall_string+=" -S $syscall"
                done
            fi
            other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
            auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
            full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
            echo "$full_rule" >> "$default_file"
            chmod o-rwx ${default_file}
        else
            # Check if the syscalls are declared as a comma separated list or
            # as multiple -S parameters
            if grep -q -- "," <<< "${rule_syscalls_to_edit}"
            then
                delimiter=","
            else
                delimiter=" -S "
            fi
            new_grouped_syscalls="${rule_syscalls_to_edit}"
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
                   # A syscall was not found in the candidate rule
                   new_grouped_syscalls+="${delimiter}${syscall}"
                   }
            done

            # Group the syscall in the rule
            sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
        fi
    fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi