Guide to the Secure Configuration of Red Hat Enterprise Linux 7

with profile DRAFT - Common Criteria Certification profile using OSPP
This profile is a draft for a future CC certification of RHEL, based on the OSPP (NIAP) requirements. It includes functionality (rules) beyond the OSPP scope itself.
This guide presents a catalog of security-relevant configuration settings for Red Hat Enterprise Linux 7. It is a rendering of content structured in the eXtensible Configuration Checklist Description Format (XCCDF) in order to support security automation. The SCAP content is is available in the scap-security-guide package which is developed at https://www.open-scap.org/security-policies/scap-security-guide.

Providing system administrators with such guidance informs them how to securely configure systems under their control in a variety of network roles. Policy makers and baseline creators can use this catalog of settings, with its associated references to higher-level security control catalogs, in order to assist them in security baseline creation. This guide is a catalog, not a checklist, and satisfaction of every item is not likely to be possible or sensible in many operational scenarios. However, the XCCDF format enables granular selection and adjustment of settings, and their association with OVAL and OCIL content provides an automated checking capability. Transformations of this document, and its associated automated checking content, are capable of providing baselines that meet a diverse set of policy objectives. Some example XCCDF Profiles, which are selections of items that form checklists and can be used as baselines, are available with this guide. They can be processed, in an automated fashion, with tools that support the Security Content Automation Protocol (SCAP). The DISA STIG, which provides required settings for US Department of Defense systems, is one example of a baseline created from this guidance.
Do not attempt to implement any of the settings in this guide without first testing them in a non-operational environment. The creators of this guidance assume no responsibility whatsoever for its use by other parties, and makes no guarantees, expressed or implied, about its quality, reliability, or any other characteristic.

Profile Information

Profile TitleDRAFT - Common Criteria Certification profile using OSPP
Profile IDxccdf_org.ssgproject.content_profile_ccc

CPE Platforms

  • cpe:/o:redhat:enterprise_linux:7
  • cpe:/o:redhat:enterprise_linux:7::client
  • cpe:/o:redhat:enterprise_linux:7::computenode

Revision History

Current version: 0.1.45

  • draft (as of 2019-07-22)

Table of Contents

  1. Services
    1. Base Services
    2. NFS and RPC
    3. SSH Server
  2. System Settings
    1. Installing and Maintaining Software
    2. Network Configuration and Firewalls
    3. Set Boot Loader Password
    4. Account and Access Control
    5. System Accounting with auditd
    6. File Permissions and Masks

Checklist

Group   Guide to the Secure Configuration of Red Hat Enterprise Linux 7   Group contains 52 groups and 107 rules
Group   Services   Group contains 6 groups and 17 rules

[ref]   The best protection against vulnerable software is running less software. This section describes how to review the software which Red Hat Enterprise Linux 7 installs on a system and disable software which is not needed. It then enumerates the software packages installed on a default Red Hat Enterprise Linux 7 system and provides guidance about which ones can be safely disabled.

Red Hat Enterprise Linux 7 provides a convenient minimal install option that essentially installs the bare necessities for a functional system. When building Red Hat Enterprise Linux 7 systems, it is highly recommended to select the minimal packages and then build up the system from there.

Group   Base Services   Group contains 2 rules

[ref]   This section addresses the base services that are installed on a Red Hat Enterprise Linux 7 default installation which are not covered in other sections. Some of these services listen on the network and should be treated with particular discretion. Other services are local system utilities that may or may not be extraneous. In general, system services should be disabled if not required.

Rule   Uninstall Automatic Bug Reporting Tool (abrt)   [ref]

The Automatic Bug Reporting Tool (abrt) collects and reports crash data when an application crash is detected. Using a variety of plugins, abrt can email crash reports to system administrators, log crash reports to files, or forward crash reports to a centralized issue tracking system such as RHTSupport. The abrt package can be removed with the following command:

$ sudo yum erase abrt

Rationale:

Mishandling crash data could expose sensitive information about vulnerabilities in software executing on the system, as well as sensitive information from within a process's address space or registers.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-81040-8

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:disable
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove abrt
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure abrt is removed
  package:
    name: abrt
    state: absent
  tags:
    - package_abrt_removed
    - medium_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-81040-8
Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
include remove_abrt

class remove_abrt {
  package { 'abrt':
    ensure => 'purged',
  }
}
Remediation Anaconda snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable

package --remove=abrt

Rule   Disable KDump Kernel Crash Analyzer (kdump)   [ref]

The kdump service provides a kernel crash dump analyzer. It uses the kexec system call to boot a secondary kernel ("capture" kernel) following a system crash, which can load information from the crashed kernel for analysis. The kdump service can be disabled with the following command:

$ sudo systemctl disable kdump.service

Rationale:

Kernel core dumps may contain the full contents of system memory at the time of the crash. Kernel core dumps consume a considerable amount of disk space and may result in denial of service by exhausting the available space on the target file system partition. Unless the system is used for kernel development or testing, there is little need to run the kdump service.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80258-7

References:  RHEL-07-021300, SV-86681r2_rule, 11, 12, 14, 15, 3, 8, 9, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06, CCI-000366, 164.308(a)(1)(ii)(D), 164.308(a)(3), 164.308(a)(4), 164.310(b), 164.310(c), 164.312(a), 164.312(e), 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2, AC-17(8), CM-7, CM-6(b), PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" stop 'kdump.service'
"$SYSTEMCTL_EXEC" disable 'kdump.service'
# Disable socket activation if we have a unit file for it
"$SYSTEMCTL_EXEC" list-unit-files | grep -q '^kdump.socket\>' && "$SYSTEMCTL_EXEC" disable 'kdump.socket'
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'kdump.service'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service kdump
  service:
    name: kdump
    enabled: 'no'
    state: stopped
  register: service_result
  failed_when: service_result is failed and ('Could not find the requested service'
    not in service_result.msg)
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - service_kdump_disabled
    - medium_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-80258-7
    - DISA-STIG-RHEL-07-021300
    - NIST-800-53-AC-17(8)
    - NIST-800-53-CM-7
    - NIST-800-53-CM-6(b)

- name: Disable socket of service kdump if applicable
  service:
    name: kdump.socket
    enabled: 'no'
    state: stopped
  register: socket_result
  failed_when: socket_result is failed and ('Could not find the requested service'
    not in socket_result.msg)
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - service_kdump_disabled
    - medium_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-80258-7
    - DISA-STIG-RHEL-07-021300
    - NIST-800-53-AC-17(8)
    - NIST-800-53-CM-7
    - NIST-800-53-CM-6(b)
Remediation Anaconda snippet:   (show)


kdump --disable
Group   NFS and RPC   Group contains 2 groups and 1 rule

[ref]   The Network File System is a popular distributed filesystem for the Unix environment, and is very widely deployed. This section discusses the circumstances under which it is possible to disable NFS and its dependencies, and then details steps which should be taken to secure NFS's configuration. This section is relevant to systems operating as NFS clients, as well as to those operating as NFS servers.

Group   Disable All NFS Services if Possible   Group contains 1 group and 1 rule

[ref]   If there is not a reason for the system to operate as either an NFS client or an NFS server, follow all instructions in this section to disable subsystems required by NFS.

Warning:  The steps in this section will prevent a system from operating as either an NFS client or an NFS server. Only perform these steps on systems which do not need NFS at all.
Group   Disable Services Used Only by NFS   Group contains 1 rule

[ref]   If NFS is not needed, disable the NFS client daemons nfslock, rpcgssd, and rpcidmapd.

All of these daemons run with elevated privileges, and many listen for network connections. If they are not needed, they should be disabled to improve system security posture.

Rule   Disable rpcbind Service   [ref]

The rpcbind utility maps RPC services to the ports on which they listen. RPC processes notify rpcbind when they start, registering the ports they are listening on and the RPC program numbers they expect to serve. The rpcbind service redirects the client to the proper port number so it can communicate with the requested service. If the system does not require RPC (such as for NFS servers) then this service should be disabled. The rpcbind service can be disabled with the following command:

$ sudo systemctl disable rpcbind.service

Rationale:

Severity: 
unknown
Identifiers and References

Identifiers:  CCE-80230-6

References:  2.2.7

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" stop 'rpcbind.service'
"$SYSTEMCTL_EXEC" disable 'rpcbind.service'
# Disable socket activation if we have a unit file for it
"$SYSTEMCTL_EXEC" list-unit-files | grep -q '^rpcbind.socket\>' && "$SYSTEMCTL_EXEC" disable 'rpcbind.socket'
# The service may not be running because it has been started and failed,
# so let's reset the state so OVAL checks pass.
# Service should be 'inactive', not 'failed' after reboot though.
"$SYSTEMCTL_EXEC" reset-failed 'rpcbind.service'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service rpcbind
  service:
    name: rpcbind
    enabled: 'no'
    state: stopped
  register: service_result
  failed_when: service_result is failed and ('Could not find the requested service'
    not in service_result.msg)
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - service_rpcbind_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-80230-6

- name: Disable socket of service rpcbind if applicable
  service:
    name: rpcbind.socket
    enabled: 'no'
    state: stopped
  register: socket_result
  failed_when: socket_result is failed and ('Could not find the requested service'
    not in socket_result.msg)
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - service_rpcbind_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-80230-6
Group   SSH Server   Group contains 1 group and 14 rules

[ref]   The SSH protocol is recommended for remote login and remote file transfer. SSH provides confidentiality and integrity for data exchanged between two systems, as well as server authentication, through the use of public key cryptography. The implementation included with the system is called OpenSSH, and more detailed documentation is available from its website, http://www.openssh.org. Its server program is called sshd and provided by the RPM package openssh-server.

Group   Configure OpenSSH Server if Necessary   Group contains 14 rules

[ref]   If the system needs to act as an SSH server, then certain changes should be made to the OpenSSH daemon configuration file /etc/ssh/sshd_config. The following recommendations can be applied to this file. See the sshd_config(5) man page for more detailed information.

Rule   Disable SSH Support for User Known Hosts   [ref]

SSH can allow system users user host-based authentication to connect to systems if a cache of the remote systems public keys are available. This should be disabled.

To ensure this behavior is disabled, add or correct the following line in /etc/ssh/sshd_config:

IgnoreUserKnownHosts yes

Rationale:

Configuring this setting for the SSH daemon provides additional assurance that remove login via SSH will require a password, even in the event of misconfiguration elsewhere.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80372-6

References:  RHEL-07-040380, SV-86873r3_rule, 11, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, 3.1.12, CCI-000366, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.4.3.2, 4.3.4.3.3, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, AC-17(b), CM-6(a), PR.IP-1, FIA_AFL.1, SRG-OS-000480-GPOS-00227

Remediation Shell script:   (show)

# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/ssh/sshd_config' '^IgnoreUserKnownHosts' 'yes' 'CCE-80372-6' '%s %s'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Disable SSH Support for User Known Hosts
  block:

    - name: Deduplicate values from /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: false
        regexp: (?i)^\s*IgnoreUserKnownHosts\s+
        state: absent

    - name: Insert correct line to /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: true
        line: IgnoreUserKnownHosts yes
        state: present
        insertbefore: ^Match
        validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sshd_disable_user_known_hosts
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-80372-6
    - DISA-STIG-RHEL-07-040380
    - NIST-800-171-3.1.12
    - NIST-800-53-AC-17(b)
    - NIST-800-53-CM-6(a)

Rule   Disable SSH Access via Empty Passwords   [ref]

To explicitly disallow SSH login from accounts with empty passwords, add or correct the following line in /etc/ssh/sshd_config:

PermitEmptyPasswords no

Any accounts with empty passwords should be disabled immediately, and PAM configuration should prevent users from being able to assign themselves empty passwords.

Rationale:

Configuring this setting for the SSH daemon provides additional assurance that remote login via SSH will require a password, even in the event of misconfiguration elsewhere.

Severity: 
high
Identifiers and References

Identifiers:  CCE-27471-2

References:  RHEL-07-010300, SV-86563r3_rule, 5.2.9, 11, 12, 13, 14, 15, 16, 18, 3, 5, 9, 5.5.6, APO01.06, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.03, DSS06.06, 3.1.1, 3.1.5, CCI-000366, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 5.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-3, AC-6, AC-17(b), CM-6(b), PR.AC-4, PR.AC-6, PR.DS-5, PR.IP-1, PR.PT-3, FIA_AFL.1, SRG-OS-000480-GPOS-00229, SRG-OS-000480-VMM-002000

Remediation Shell script:   (show)

# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/ssh/sshd_config' '^PermitEmptyPasswords' 'no' 'CCE-27471-2' '%s %s'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Disable SSH Access via Empty Passwords
  block:

    - name: Deduplicate values from /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: false
        regexp: (?i)^\s*PermitEmptyPasswords\s+
        state: absent

    - name: Insert correct line to /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: true
        line: PermitEmptyPasswords no
        state: present
        insertbefore: ^Match
        validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sshd_disable_empty_passwords
    - high_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-27471-2
    - DISA-STIG-RHEL-07-010300
    - NIST-800-171-3.1.1
    - NIST-800-171-3.1.5
    - NIST-800-53-AC-3
    - NIST-800-53-AC-6
    - NIST-800-53-AC-17(b)
    - NIST-800-53-CM-6(b)
    - CJIS-5.5.6

Rule   Set SSH Client Alive Max Count   [ref]

To ensure the SSH idle timeout occurs precisely when the ClientAliveInterval is set, edit /etc/ssh/sshd_config as follows:

ClientAliveCountMax 0

Rationale:

This ensures a user login will be terminated as soon as the ClientAliveInterval is reached.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-27082-7

References:  RHEL-07-040340, SV-86865r4_rule, 5.2.12, 1, 12, 13, 14, 15, 16, 18, 3, 5, 7, 8, 5.5.6, APO13.01, BAI03.01, BAI03.02, BAI03.03, DSS01.03, DSS03.05, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.1.11, CCI-001133, CCI-002361, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 6.2, A.12.4.1, A.12.4.3, A.14.1.1, A.14.2.1, A.14.2.5, A.18.1.4, A.6.1.2, A.6.1.5, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, AC-2(5), SA-8, AC-12, AC-17(b), DE.CM-1, DE.CM-3, PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.IP-2, SRG-OS-000163-GPOS-00072, SRG-OS-000279-GPOS-00109A, SRG-OS-000480-VMM-002000

Remediation Shell script:   (show)


var_sshd_set_keepalive="0"
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/ssh/sshd_config' '^ClientAliveCountMax' "$var_sshd_set_keepalive" 'CCE-27082-7' '%s %s'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value var_sshd_set_keepalive # promote to variable
  set_fact:
    var_sshd_set_keepalive: !!str 0
  tags:
    - always

- name: Set SSH Client Alive Max Count
  block:

    - name: Deduplicate values from /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: false
        regexp: (?i)^\s*ClientAliveCountMax\s+
        state: absent

    - name: Insert correct line to /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: true
        line: ClientAliveCountMax {{ var_sshd_set_keepalive }}
        state: present
        insertbefore: ^Match
        validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sshd_set_keepalive
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-27082-7
    - DISA-STIG-RHEL-07-040340
    - NIST-800-171-3.1.11
    - NIST-800-53-AC-2(5)
    - NIST-800-53-SA-8
    - NIST-800-53-AC-12
    - NIST-800-53-AC-17(b)
    - CJIS-5.5.6

Rule   Set SSH Idle Timeout Interval   [ref]

SSH allows administrators to set an idle timeout interval. After this interval has passed, the idle user will be automatically logged out.

To set an idle timeout interval, edit the following line in /etc/ssh/sshd_config as follows:

ClientAliveInterval 600
The timeout interval is given in seconds. To have a timeout of 15 minutes, set interval to 900.

If a shorter timeout has already been set for the login shell, that value will preempt any SSH setting made here. Keep in mind that some processes may stop SSH from correctly detecting that the user is idle.

Rationale:

Terminating an idle ssh session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been let unattended.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-27433-2

References:  RHEL-07-040320, SV-86861r4_rule, NT28(R29), 5.2.12, 1, 12, 13, 14, 15, 16, 18, 3, 5, 7, 8, 5.5.6, APO13.01, BAI03.01, BAI03.02, BAI03.03, DSS01.03, DSS03.05, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.1.11, CCI-001133, CCI-002361, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 6.2, A.12.4.1, A.12.4.3, A.14.1.1, A.14.2.1, A.14.2.5, A.18.1.4, A.6.1.2, A.6.1.5, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, AC-2(5), SA-8(i), AC-12, AC-17(b), DE.CM-1, DE.CM-3, PR.AC-1, PR.AC-4, PR.AC-6, PR.AC-7, PR.IP-2, Req-8.1.8, SRG-OS-000163-GPOS-00072, SRG-OS-000279-GPOS-00109, SRG-OS-000480-VMM-002000

Remediation Shell script:   (show)


sshd_idle_timeout_value="600"
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/ssh/sshd_config' '^ClientAliveInterval' $sshd_idle_timeout_value 'CCE-27433-2' '%s %s'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value sshd_idle_timeout_value # promote to variable
  set_fact:
    sshd_idle_timeout_value: !!str 600
  tags:
    - always

- name: Set SSH Idle Timeout Interval
  block:

    - name: Deduplicate values from /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: false
        regexp: (?i)^\s*ClientAliveInterval\s+
        state: absent

    - name: Insert correct line to /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: true
        line: ClientAliveInterval {{ sshd_idle_timeout_value }}
        state: present
        insertbefore: ^Match
        validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sshd_set_idle_timeout
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-27433-2
    - PCI-DSS-Req-8.1.8
    - DISA-STIG-RHEL-07-040320
    - NIST-800-171-3.1.11
    - NIST-800-53-AC-2(5)
    - NIST-800-53-SA-8(i)
    - NIST-800-53-AC-12
    - NIST-800-53-AC-17(b)
    - CJIS-5.5.6

Rule   Enable SSH Warning Banner   [ref]

To enable the warning banner and ensure it is consistent across the system, add or correct the following line in /etc/ssh/sshd_config:

Banner /etc/issue
Another section contains information on how to create an appropriate system-wide warning banner.

Rationale:

The warning message reinforces policy awareness during the logon process and facilitates possible legal action against attackers. Alternatively, systems whose ownership should not be obvious should ensure usage of a banner that does not provide easy attribution.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-27314-4

References:  RHEL-07-040170, SV-86849r4_rule, 5.2.16, 1, 12, 15, 16, 5.5.6, DSS05.04, DSS05.10, DSS06.10, 3.1.9, CCI-000048, CCI-000050, CCI-001384, CCI-001385, CCI-001386, CCI-001387, CCI-001388, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, AC-8(a), AC-8(b), AC-8(c)(1), AC-8(c)(2), AC-8(c)(3), AC-17(b), PR.AC-7, FMT_MOF_EXT.1, SRG-OS-000023-GPOS-00006, SRG-OS-000024-GPOS-00007, SRG-OS-000228-GPOS-00088, SRG-OS-000023-VMM-000060, SRG-OS-000024-VMM-000070

Remediation Shell script:   (show)


grep -q ^Banner /etc/ssh/sshd_config && \
  sed -i "s/Banner.*/Banner \/etc\/issue/g" /etc/ssh/sshd_config
if ! [ $? -eq 0 ]; then
    echo "Banner /etc/issue" >> /etc/ssh/sshd_config
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Enable SSH Warning Banner
  block:

    - name: Deduplicate values from /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: false
        regexp: (?i)^\s*Banner\s+
        state: absent

    - name: Insert correct line to /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: true
        line: Banner /etc/issue
        state: present
        insertbefore: ^Match
        validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sshd_enable_warning_banner
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-27314-4
    - DISA-STIG-RHEL-07-040170
    - NIST-800-171-3.1.9
    - NIST-800-53-AC-8(a)
    - NIST-800-53-AC-8(b)
    - NIST-800-53-AC-8(c)(1)
    - NIST-800-53-AC-8(c)(2)
    - NIST-800-53-AC-8(c)(3)
    - NIST-800-53-AC-17(b)
    - CJIS-5.5.6

Rule   Use Only FIPS 140-2 Validated MACs   [ref]

Limit the MACs to those hash algorithms which are FIPS-approved. The following line in /etc/ssh/sshd_config demonstrates use of FIPS-approved MACs:

MACs hmac-sha2-512,hmac-sha2-256,hmac-sha1
The man page sshd_config(5) contains a list of supported MACs.

Only the following message authentication codes are FIPS 140-2 certified on Red Hat Enterprise Linux 7:
- hmac-sha1
- hmac-sha2-256
- hmac-sha2-512
- hmac-sha1-etm@openssh.com
- hmac-sha2-256-etm@openssh.com
- hmac-sha2-512-etm@openssh.com

Any combination of the above MACs will pass this check. Official FIPS 140-2 paperwork for Red Hat Enterprise Linux 7 can be found at http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/140sp/140sp2630.pdf

Warning:  The system needs to be rebooted for these changes to take effect.
Warning:  The Federal Information Systems Modernization Act (FISMA), requires cryptography protecting sensitive or valuable data to undergo FIPS 140 validation. The U.S. National Institute of Standards and Technology (NIST) views unvalidated cryptography as providing no protection to the information or data—in effect the data would be considered unprotected plaintext. If the agency specifies that the information or data be cryptographically protected, FIPS 140 is applicable. This configuration check will fail on platforms lacking FIPS 140 validation, such as the CentOS, Scientific Linux, and Fedora projects, even if FIPS-approved ciphers can be installed and enabled.

See https://csrc.nist.gov/Projects/cryptographic-module-validation-program for more information about the Cryptographic Validation Program.

A list of FIPS validated cryptographic modules can be found at http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/1401vend.htm. The validated cryptographic modules only apply to the products and companies listed in the active validation list.
Rationale:

DoD Information Systems are required to use FIPS-approved cryptographic hash functions. The only SSHv2 hash algorithms meeting this requirement is SHA2.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-27455-5

References:  RHEL-07-040400, SV-86877r3_rule, 5.2.12, 1, 12, 13, 15, 16, 5, 8, APO01.06, APO13.01, DSS01.04, DSS05.02, DSS05.03, DSS05.04, DSS05.07, DSS06.02, DSS06.03, 3.1.13, 3.13.11, 3.13.8, CCI-000068, CCI-000803, CCI-001453, 164.308(b)(1), 164.308(b)(2), 164.312(e)(1), 164.312(e)(2)(i), 164.312(e)(2)(ii), 164.314(b)(2)(i), 4.3.3.5.1, 4.3.3.6.6, SR 1.1, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.7, SR 1.8, SR 1.9, SR 2.6, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.11.2.6, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.6.2.1, A.6.2.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, AC-17(b), AC-17(2), IA-7, SC-13, PR.AC-1, PR.AC-3, PR.DS-5, PR.PT-4, SRG-OS-000250-GPOS-00093, SRG-OS-000033-VMM-000140, SRG-OS-000120-VMM-000600, SRG-OS-000478-VMM-001980, SRG-OS-000480-VMM-002000, SRG-OS-000396-VMM-001590

Remediation Shell script:   (show)


sshd_approved_macs="hmac-sha2-512,hmac-sha2-256,hmac-sha1,hmac-sha1-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com"
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/ssh/sshd_config' '^MACs' "$sshd_approved_macs" 'CCE-27455-5' '%s %s'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value sshd_approved_macs # promote to variable
  set_fact:
    sshd_approved_macs: !!str hmac-sha2-512,hmac-sha2-256,hmac-sha1,hmac-sha1-etm@openssh.com,hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com
  tags:
    - always

- name: Use Only FIPS 140-2 Validated MACs
  block:

    - name: Deduplicate values from /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: false
        regexp: (?i)^\s*MACs\s+
        state: absent

    - name: Insert correct line to /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: true
        line: MACs {{ sshd_approved_macs }}
        state: present
        insertbefore: ^Match
        validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sshd_use_approved_macs
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-27455-5
    - DISA-STIG-RHEL-07-040400
    - NIST-800-171-3.1.13
    - NIST-800-171-3.13.11
    - NIST-800-171-3.13.8
    - NIST-800-53-AC-17(b)
    - NIST-800-53-AC-17(2)
    - NIST-800-53-IA-7
    - NIST-800-53-SC-13

Rule   Disable Kerberos Authentication   [ref]

Unless needed, SSH should not permit extraneous or unnecessary authentication mechanisms like Kerberos. To disable Kerberos authentication, add or correct the following line in the /etc/ssh/sshd_config file:

KerberosAuthentication no

Rationale:

Kerberos authentication for SSH is often implemented using GSSAPI. If Kerberos is enabled through SSH, the SSH daemon provides a means of access to the system's Kerberos implementation. Vulnerabilities in the system's Kerberos implementations may be subject to exploitation.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80221-5

References:  RHEL-07-040440, SV-86885r3_rule, 11, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, 3.1.12, CCI-000368, CCI-000318, CCI-001812, CCI-001813, CCI-001814, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.4.3.2, 4.3.4.3.3, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, CM-6(c), PR.IP-1, FIA_AFL.1, SRG-OS-000364-GPOS-00151, SRG-OS-000480-VMM-002000

Remediation Shell script:   (show)

# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/ssh/sshd_config' '^KerberosAuthentication' 'no' 'CCE-80221-5' '%s %s'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Disable Kerberos Authentication
  block:

    - name: Deduplicate values from /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: false
        regexp: (?i)^\s*KerberosAuthentication\s+
        state: absent

    - name: Insert correct line to /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: true
        line: KerberosAuthentication no
        state: present
        insertbefore: ^Match
        validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sshd_disable_kerb_auth
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-80221-5
    - DISA-STIG-RHEL-07-040440
    - NIST-800-171-3.1.12
    - NIST-800-53-CM-6(c)

Rule   Disable SSH Support for .rhosts Files   [ref]

SSH can emulate the behavior of the obsolete rsh command in allowing users to enable insecure access to their accounts via .rhosts files.

To ensure this behavior is disabled, add or correct the following line in /etc/ssh/sshd_config:

IgnoreRhosts yes

Rationale:

SSH trust relationships mean a compromise on one host can allow an attacker to move trivially to other hosts.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-27377-1

References:  RHEL-07-040350, SV-86867r3_rule, 5.2.6, 11, 12, 14, 15, 16, 18, 3, 5, 9, 5.5.6, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.03, DSS06.06, 3.1.12, CCI-000366, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-3, AC-17(b), CM-6(a), PR.AC-4, PR.AC-6, PR.IP-1, PR.PT-3, FIA_AFL.1, SRG-OS-000480-GPOS-00227, SRG-OS-000107-VMM-000530

Remediation Shell script:   (show)

# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/ssh/sshd_config' '^IgnoreRhosts' 'yes' 'CCE-27377-1' '%s %s'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Disable SSH Support for .rhosts Files
  block:

    - name: Deduplicate values from /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: false
        regexp: (?i)^\s*IgnoreRhosts\s+
        state: absent

    - name: Insert correct line to /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: true
        line: IgnoreRhosts yes
        state: present
        insertbefore: ^Match
        validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sshd_disable_rhosts
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-27377-1
    - DISA-STIG-RHEL-07-040350
    - NIST-800-171-3.1.12
    - NIST-800-53-AC-3
    - NIST-800-53-AC-17(b)
    - NIST-800-53-CM-6(a)
    - CJIS-5.5.6

Rule   Disable SSH Support for Rhosts RSA Authentication   [ref]

SSH can allow authentication through the obsolete rsh command through the use of the authenticating user's SSH keys. This should be disabled.

To ensure this behavior is disabled, add or correct the following line in /etc/ssh/sshd_config:

RhostsRSAAuthentication no

Warning:  As of openssh-server version 7.4 and above, the RhostsRSAAuthentication option has been deprecated, and the line
RhostsRSAAuthentication no
in /etc/ssh/sshd_config is not necessary.
Rationale:

Configuring this setting for the SSH daemon provides additional assurance that remove login via SSH will require a password, even in the event of misconfiguration elsewhere.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80373-4

References:  RHEL-07-040330, SV-86863r4_rule, 11, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, 3.1.12, CCI-000366, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.4.3.2, 4.3.4.3.3, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, CM-6(a), AC-17(b), PR.IP-1, FIA_AFL.1, SRG-OS-000480-GPOS-00227

Remediation Shell script:   (show)

# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/ssh/sshd_config' '^RhostsRSAAuthentication' 'no' 'CCE-80373-4' '%s %s'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Disable SSH Support for Rhosts RSA Authentication
  block:

    - name: Deduplicate values from /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: false
        regexp: (?i)^\s*RhostsRSAAuthentication\s+
        state: absent

    - name: Insert correct line to /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: true
        line: RhostsRSAAuthentication no
        state: present
        insertbefore: ^Match
        validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sshd_disable_rhosts_rsa
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-80373-4
    - DISA-STIG-RHEL-07-040330
    - NIST-800-171-3.1.12
    - NIST-800-53-CM-6(a)
    - NIST-800-53-AC-17(b)

Rule   Use Only FIPS 140-2 Validated Ciphers   [ref]

Limit the ciphers to those algorithms which are FIPS-approved. Counter (CTR) mode is also preferred over cipher-block chaining (CBC) mode. The following line in /etc/ssh/sshd_config demonstrates use of FIPS-approved ciphers:

Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc
The man page sshd_config(5) contains a list of supported ciphers.

The following ciphers are FIPS 140-2 certified on Red Hat Enterprise Linux 7:
- aes128-ctr
- aes192-ctr
- aes256-ctr
- aes128-cbc
- aes192-cbc
- aes256-cbc
- 3des-cbc
- rijndael-cbc@lysator.liu.se

Any combination of the above ciphers will pass this check. Official FIPS 140-2 paperwork for Red Hat Enterprise Linux 7 can be found at http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/140sp/140sp2630.pdf

Warning:  The system needs to be rebooted for these changes to take effect.
Warning:  The Federal Information Systems Modernization Act (FISMA), requires cryptography protecting sensitive or valuable data to undergo FIPS 140 validation. The U.S. National Institute of Standards and Technology (NIST) views unvalidated cryptography as providing no protection to the information or data—in effect the data would be considered unprotected plaintext. If the agency specifies that the information or data be cryptographically protected, FIPS 140 is applicable. This configuration check will fail on platforms lacking FIPS 140 validation, such as the CentOS, Scientific Linux, and Fedora projects, even if FIPS-approved ciphers can be installed and enabled.

See https://csrc.nist.gov/Projects/cryptographic-module-validation-program for more information about the Cryptographic Validation Program.

A list of FIPS validated cryptographic modules can be found at http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/1401vend.htm. The validated cryptographic modules only apply to the products and companies listed in the active validation list.
Rationale:

Unapproved mechanisms that are used for authentication to the cryptographic module are not verified and therefore cannot be relied upon to provide confidentiality or integrity, and system data may be compromised.
Operating systems utilizing encryption are required to use FIPS-compliant mechanisms for authenticating to cryptographic modules.
FIPS 140-2 is the current standard for validating that mechanisms used to access cryptographic modules utilize authentication that meets industry and government requirements. For government systems, this allows Security Levels 1, 2, 3, or 4 for use on Red Hat Enterprise Linux 7.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-27295-5

References:  RHEL-07-040110, SV-86845r3_rule, 5.2.10, 1, 11, 12, 14, 15, 16, 18, 3, 5, 6, 8, 9, 5.5.6, APO11.04, APO13.01, BAI03.05, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.06, DSS06.10, MEA02.01, 3.1.13, 3.13.11, 3.13.8, CCI-000068, CCI-000366, CCI-000803, 164.308(b)(1), 164.308(b)(2), 164.312(e)(1), 164.312(e)(2)(i), 164.312(e)(2)(ii), 164.314(b)(2)(i), 4.3.3.2.2, 4.3.3.3.9, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.7, 4.4.2.1, 4.4.2.2, 4.4.2.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.10, SR 2.11, SR 2.12, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 2.8, SR 2.9, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.12.1.2, A.12.4.1, A.12.4.2, A.12.4.3, A.12.4.4, A.12.5.1, A.12.6.2, A.12.7.1, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.18.1.4, A.6.1.2, A.6.2.1, A.6.2.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.2, A.9.2.3, A.9.2.4, A.9.2.6, A.9.3.1, A.9.4.1, A.9.4.2, A.9.4.3, A.9.4.4, A.9.4.5, AC-3, AC-17(b), AC-17(2), AU-10(5), CM-6(b), IA-5(1)(c), IA-7, SI-7, SC-13, PR.AC-1, PR.AC-3, PR.AC-4, PR.AC-6, PR.AC-7, PR.IP-1, PR.PT-1, PR.PT-3, PR.PT-4, SRG-OS-000033-GPOS-00014, SRG-OS-000120-GPOS-00061, SRG-OS-000125-GPOS-00065, SRG-OS-000250-GPOS-00093, SRG-OS-000393-GPOS-00173, SRG-OS-000033-VMM-000140, SRG-OS-000120-VMM-000600, SRG-OS-000478-VMM-001980, SRG-OS-000396-VMM-001590

Remediation Shell script:   (show)

# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/ssh/sshd_config' '^Ciphers' 'aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc' 'CCE-27295-5' '%s %s'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Use Only FIPS 140-2 Validated Ciphers
  block:

    - name: Deduplicate values from /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: false
        regexp: (?i)^\s*Ciphers\s+
        state: absent

    - name: Insert correct line to /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: true
        line: Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc
        state: present
        insertbefore: ^Match
        validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sshd_use_approved_ciphers
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-27295-5
    - DISA-STIG-RHEL-07-040110
    - NIST-800-171-3.1.13
    - NIST-800-171-3.13.11
    - NIST-800-171-3.13.8
    - NIST-800-53-AC-3
    - NIST-800-53-AC-17(b)
    - NIST-800-53-AC-17(2)
    - NIST-800-53-AU-10(5)
    - NIST-800-53-CM-6(b)
    - NIST-800-53-IA-5(1)(c)
    - NIST-800-53-IA-7
    - NIST-800-53-SI-7
    - NIST-800-53-SC-13
    - CJIS-5.5.6

Rule   Disable Host-Based Authentication   [ref]

SSH's cryptographic host-based authentication is more secure than .rhosts authentication. However, it is not recommended that hosts unilaterally trust one another, even within an organization.

To disable host-based authentication, add or correct the following line in /etc/ssh/sshd_config:

HostbasedAuthentication no

Rationale:

SSH trust relationships mean a compromise on one host can allow an attacker to move trivially to other hosts.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-27413-4

References:  RHEL-07-010470, SV-86583r3_rule, 5.2.7, 11, 12, 14, 15, 16, 18, 3, 5, 9, 5.5.6, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.03, DSS06.06, 3.1.12, CCI-000366, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-3, AC-17, CM-6(b), PR.AC-4, PR.AC-6, PR.IP-1, PR.PT-3, FIA_AFL.1, SRG-OS-000480-GPOS-00229, SRG-OS-000480-VMM-002000

Remediation Shell script:   (show)

grep -q ^HostbasedAuthentication /etc/ssh/sshd_config && \
  sed -i "s/HostbasedAuthentication.*/HostbasedAuthentication no/g" /etc/ssh/sshd_config
if ! [ $? -eq 0 ]; then
    echo "HostbasedAuthentication no" >> /etc/ssh/sshd_config
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Disable Host-Based Authentication
  block:

    - name: Deduplicate values from /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: false
        regexp: (?i)^\s*HostbasedAuthentication\s+
        state: absent

    - name: Insert correct line to /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: true
        line: HostbasedAuthentication no
        state: present
        insertbefore: ^Match
        validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - disable_host_auth
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-27413-4
    - DISA-STIG-RHEL-07-010470
    - NIST-800-171-3.1.12
    - NIST-800-53-AC-3
    - NIST-800-53-AC-17
    - NIST-800-53-CM-6(b)
    - CJIS-5.5.6

Rule   Enable Use of Strict Mode Checking   [ref]

SSHs StrictModes option checks file and ownership permissions in the user's home directory .ssh folder before accepting login. If world- writable permissions are found, logon is rejected. To enable StrictModes in SSH, add or correct the following line in the /etc/ssh/sshd_config file:

StrictModes yes

Rationale:

If other users have access to modify user-specific SSH configuration files, they may be able to log into the system as another user.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80222-3

References:  RHEL-07-040450, SV-86887r3_rule, 12, 13, 14, 15, 16, 18, 3, 5, APO01.06, DSS05.04, DSS05.07, DSS06.02, 3.1.12, CCI-000366, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.3.7.3, SR 2.1, SR 5.2, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.13.1.1, A.13.1.3, A.13.2.1, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-6, AC-17(b), PR.AC-4, PR.DS-5, SRG-OS-000480-GPOS-00227, SRG-OS-000480-VMM-002000

Remediation Shell script:   (show)

# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/ssh/sshd_config' '^StrictModes' 'yes' 'CCE-80222-3' '%s %s'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Enable Use of Strict Mode Checking
  block:

    - name: Deduplicate values from /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: false
        regexp: (?i)^\s*StrictModes\s+
        state: absent

    - name: Insert correct line to /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: true
        line: StrictModes yes
        state: present
        insertbefore: ^Match
        validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sshd_enable_strictmodes
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-80222-3
    - DISA-STIG-RHEL-07-040450
    - NIST-800-171-3.1.12
    - NIST-800-53-AC-6
    - NIST-800-53-AC-17(b)

Rule   Disable GSSAPI Authentication   [ref]

Unless needed, SSH should not permit extraneous or unnecessary authentication mechanisms like GSSAPI. To disable GSSAPI authentication, add or correct the following line in the /etc/ssh/sshd_config file:

GSSAPIAuthentication no

Rationale:

GSSAPI authentication is used to provide additional authentication mechanisms to applications. Allowing GSSAPI authentication through SSH exposes the system's GSSAPI to remote hosts, increasing the attack surface of the system.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80220-7

References:  RHEL-07-040430, SV-86883r3_rule, 11, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, 3.1.12, CCI-000368, CCI-000318, CCI-001812, CCI-001813, CCI-001814, 164.308(a)(4)(i), 164.308(b)(1), 164.308(b)(3), 164.310(b), 164.312(e)(1), 164.312(e)(2)(ii), 4.3.4.3.2, 4.3.4.3.3, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, AC-17(b), CM-6(c), PR.IP-1, FIA_AFL.1, SRG-OS-000364-GPOS-00151, SRG-OS-000480-VMM-002000

Remediation Shell script:   (show)

# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/ssh/sshd_config' '^GSSAPIAuthentication' 'no' 'CCE-80220-7' '%s %s'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Disable GSSAPI Authentication
  block:

    - name: Deduplicate values from /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: false
        regexp: (?i)^\s*GSSAPIAuthentication\s+
        state: absent

    - name: Insert correct line to /etc/ssh/sshd_config
      lineinfile:
        path: /etc/ssh/sshd_config
        create: true
        line: GSSAPIAuthentication no
        state: present
        insertbefore: ^Match
        validate: /usr/sbin/sshd -t -f %s
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sshd_disable_gssapi_auth
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-80220-7
    - DISA-STIG-RHEL-07-040430
    - NIST-800-171-3.1.12
    - NIST-800-53-AC-17(b)
    - NIST-800-53-CM-6(c)
Group   System Settings   Group contains 44 groups and 90 rules

[ref]   Contains rules that check correct system settings.

Group   Installing and Maintaining Software   Group contains 3 groups and 6 rules

[ref]   The following sections contain information on security-relevant choices during the initial operating system installation process and the setup of software updates.

Group   System and Software Integrity   Group contains 1 group and 2 rules

[ref]   System and software integrity can be gained by installing antivirus, increasing system encryption strength with FIPS, verifying installed software, enabling SELinux, installing an Intrusion Prevention System, etc. However, installing or enabling integrity checking tools cannot prevent intrusions, but they can detect that an intrusion may have occurred. Requirements for integrity checking may be highly dependent on the environment in which the system will be used. Snapshot-based approaches such as AIDE may induce considerable overhead in the presence of frequent software updates.

Group   Federal Information Processing Standard (FIPS)   Group contains 2 rules

[ref]   The Federal Information Processing Standard (FIPS) is a computer security standard which is developed by the U.S. Government and industry working groups to validate the quality of cryptographic modules. The FIPS standard provides four security levels to ensure adequate coverage of different industries, implementation of cryptographic modules, and organizational sizes and requirements.

FIPS 140-2 is the current standard for validating that mechanisms used to access cryptographic modules utilize authentication that meets industry and government requirements. For government systems, this allows Security Levels 1, 2, 3, or 4 for use on Red Hat Enterprise Linux 7.

See http://csrc.nist.gov/publications/PubsFIPS.html for more information.

Rule   Install the dracut-fips Package   [ref]

To enable FIPS, the system requires that the dracut-fips package be installed. The dracut-fips package can be installed with the following command:

$ sudo yum install dracut-fips

Warning:  The Federal Information Systems Modernization Act (FISMA), requires cryptography protecting sensitive or valuable data to undergo FIPS 140 validation. The U.S. National Institute of Standards and Technology (NIST) views unvalidated cryptography as providing no protection to the information or data—in effect the data would be considered unprotected plaintext. If the agency specifies that the information or data be cryptographically protected, FIPS 140 is applicable. This configuration check will fail on platforms lacking FIPS 140 validation, such as the CentOS, Scientific Linux, and Fedora projects, even if FIPS-approved ciphers can be installed and enabled.

See https://csrc.nist.gov/Projects/cryptographic-module-validation-program for more information about the Cryptographic Validation Program.

A list of FIPS validated cryptographic modules can be found at http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/1401vend.htm. The validated cryptographic modules only apply to the products and companies listed in the active validation list.
Rationale:

Use of weak or untested encryption algorithms undermines the purposes of utilizing encryption to protect data. The operating system must implement cryptographic modules adhering to the higher standards approved by the federal government since this provides assurance they have been tested and validated.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80358-5

References:  12, 15, 8, 5.10.1.2, APO13.01, DSS01.04, DSS05.02, DSS05.03, 3.13.11, 3.13.8, CCI-000068, CCI-000803, CCI-002450, 4.3.3.6.6, SR 1.13, SR 2.6, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.13.1.1, A.13.2.1, A.14.1.3, A.6.2.1, A.6.2.2, AC-17(2), IA-7, SC-13, PR.AC-3, PR.PT-4, SRG-OS-000033-GPOS-00014, SRG-OS-000396-GPOS-00176, SRG-OS-000478-GPOS-00223, SRG-OS-000120-VMM-000600, SRG-OS-000478-VMM-001980, SRG-OS-000396-VMM-001590

Remediation Shell script:   (show)

# Function to install packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_install aide
#
function package_install {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_install 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if ! rpm -q --quiet "$package"; then
    dnf install -y "$package"
  fi
elif which yum ; then
  if ! rpm -q --quiet "$package"; then
    yum install -y "$package"
  fi
elif which apt-get ; then
  apt-get install -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_install dracut-fips
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure dracut-fips is installed
  package:
    name: dracut-fips
    state: present
  when:
    - ansible_distribution == 'RedHat'
    - ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - package_dracut-fips_installed
    - medium_severity
    - enable_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-80358-5
    - NIST-800-171-3.13.11
    - NIST-800-171-3.13.8
    - NIST-800-53-AC-17(2)
    - NIST-800-53-IA-7
    - NIST-800-53-SC-13
    - CJIS-5.10.1.2
Remediation Anaconda snippet:   (show)


package --add=dracut-fips

Rule   Enable FIPS Mode in GRUB2   [ref]

To ensure FIPS mode is enabled, install package dracut-fips, and rebuild initramfs by running the following commands:

$ sudo yum install dracut-fips
dracut -f
After the dracut command has been run, add the argument fips=1 to the default GRUB 2 command line for the Linux operating system in /etc/default/grub, in the manner below:
GRUB_CMDLINE_LINUX="crashkernel=auto rd.lvm.lv=VolGroup/LogVol06 rd.lvm.lv=VolGroup/lv_swap rhgb quiet rd.shell=0 fips=1"
Finally, rebuild the grub.cfg file by using the
grub2-mkconfig -o
command as follows:
  • On BIOS-based machines, issue the following command as root:
    ~]# grub2-mkconfig -o /boot/grub2/grub.cfg
  • On UEFI-based machines, issue the following command as root:
    ~]# grub2-mkconfig -o /boot/efi/EFI/redhat/grub.cfg

Warning:  Running
dracut -f
will overwrite the existing initramfs file.
Warning:  The system needs to be rebooted for these changes to take effect.
Warning:  The Federal Information Systems Modernization Act (FISMA), requires cryptography protecting sensitive or valuable data to undergo FIPS 140 validation. The U.S. National Institute of Standards and Technology (NIST) views unvalidated cryptography as providing no protection to the information or data—in effect the data would be considered unprotected plaintext. If the agency specifies that the information or data be cryptographically protected, FIPS 140 is applicable. This configuration check will fail on platforms lacking FIPS 140 validation, such as the CentOS, Scientific Linux, and Fedora projects, even if FIPS-approved ciphers can be installed and enabled.

See https://csrc.nist.gov/Projects/cryptographic-module-validation-program for more information about the Cryptographic Validation Program.

A list of FIPS validated cryptographic modules can be found at http://csrc.nist.gov/groups/STM/cmvp/documents/140-1/1401vend.htm. The validated cryptographic modules only apply to the products and companies listed in the active validation list.
Rationale:

Use of weak or untested encryption algorithms undermines the purposes of utilizing encryption to protect data. The operating system must implement cryptographic modules adhering to the higher standards approved by the federal government since this provides assurance they have been tested and validated.

Severity: 
high
Identifiers and References

Identifiers:  CCE-80359-3

References:  RHEL-07-021350, SV-86691r4_rule, 12, 15, 8, 5.10.1.2, APO13.01, DSS01.04, DSS05.02, DSS05.03, 3.13.8, 3.13.11, CCI-000068, CCI-000803, CCI-002450, 4.3.3.6.6, SR 1.13, SR 2.6, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.13.1.1, A.13.2.1, A.14.1.3, A.6.2.1, A.6.2.2, IA-5, SC-13, AC-17(2), IA-7, PR.AC-3, PR.PT-4, SRG-OS-000033-GPOS-00014, SRG-OS-000396-GPOS-00176, SRG-OS-000478-GPOS-00223, SRG-OS-000120-VMM-000600, SRG-OS-000478-VMM-001980, SRG-OS-000396-VMM-001590

Remediation Shell script:   (show)

function disable_prelink {
	# prelink not installed
	if test ! -e /etc/sysconfig/prelink -a ! -e /usr/sbin/prelink; then
		return 0
	fi

	if grep -q ^PRELINKING /etc/sysconfig/prelink
	then
		sed -i 's/^PRELINKING[:blank:]*=[:blank:]*[:alpha:]*/PRELINKING=no/' /etc/sysconfig/prelink
	else
		printf '\n' >> /etc/sysconfig/prelink
		printf '%s\n' '# Set PRELINKING=no per security requirements' 'PRELINKING=no' >> /etc/sysconfig/prelink
	fi

	# Undo previous prelink changes to binaries if prelink is available.
	if test -x /usr/sbin/prelink; then
		/usr/sbin/prelink -ua
	fi
}

disable_prelink

if grep -q -m1 -o aes /proc/cpuinfo; then
# Function to install packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_install aide
#
function package_install {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_install 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if ! rpm -q --quiet "$package"; then
    dnf install -y "$package"
  fi
elif which yum ; then
  if ! rpm -q --quiet "$package"; then
    yum install -y "$package"
  fi
elif which apt-get ; then
  apt-get install -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

	package_install dracut-fips-aesni
fi
# Function to install packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_install aide
#
function package_install {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_install 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if ! rpm -q --quiet "$package"; then
    dnf install -y "$package"
  fi
elif which yum ; then
  if ! rpm -q --quiet "$package"; then
    yum install -y "$package"
  fi
elif which apt-get ; then
  apt-get install -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_install dracut-fips

dracut -f

# Correct the form of default kernel command line in  grub
if grep -q '^GRUB_CMDLINE_LINUX=.*fips=.*"'  /etc/default/grub; then
	# modify the GRUB command-line if a fips= arg already exists
	sed -i 's/\(^GRUB_CMDLINE_LINUX=".*\)fips=[^[:space:]]*\(.*"\)/\1 fips=1 \2/'  /etc/default/grub
else
	# no existing fips=arg is present, append it
	sed -i 's/\(^GRUB_CMDLINE_LINUX=".*\)"/\1 fips=1"/'  /etc/default/grub
fi

# Get the UUID of the device mounted at /boot.
BOOT_UUID=$(findmnt --noheadings --output uuid --target /boot)

if grep -q '^GRUB_CMDLINE_LINUX=".*boot=.*"'  /etc/default/grub; then
	# modify the GRUB command-line if a boot= arg already exists
	sed -i 's/\(^GRUB_CMDLINE_LINUX=".*\)boot=[^[:space:]]*\(.*"\)/\1 boot=UUID='"${BOOT_UUID} \2/" /etc/default/ grub
else
	# no existing boot=arg is present, append it
	sed -i 's/\(^GRUB_CMDLINE_LINUX=".*\)"/\1 boot=UUID='${BOOT_UUID}'"/'  /etc/default/grub
fi

# Correct the form of kernel command line for each installed kernel in the bootloader
/sbin/grubby --update-kernel=ALL --args="fips=1 boot=UUID=${BOOT_UUID}"
Remediation Ansible snippet:   (show)

Complexity:high
Disruption:medium
Reboot:true
Strategy:restrict
- name: check prelink binary installed
  stat:
    path: /usr/sbin/prelink
  register: prelink_exists
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - grub2_enable_fips_mode
    - high_severity
    - restrict_strategy
    - high_complexity
    - medium_disruption
    - reboot_required
    - CCE-80359-3
    - DISA-STIG-RHEL-07-021350
    - NIST-800-171-3.13.8
    - NIST-800-171-3.13.11
    - NIST-800-53-IA-5
    - NIST-800-53-SC-13
    - NIST-800-53-AC-17(2)
    - NIST-800-53-IA-7
    - CJIS-5.10.1.2

- name: disable prelink
  lineinfile:
    dest: /etc/sysconfig/prelink
    regexp: ^#?PRELINKING
    line: PRELINKING=no
  when:
    - prelink_exists.stat.exists == True
    - ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - grub2_enable_fips_mode
    - high_severity
    - restrict_strategy
    - high_complexity
    - medium_disruption
    - reboot_required
    - CCE-80359-3
    - DISA-STIG-RHEL-07-021350
    - NIST-800-171-3.13.8
    - NIST-800-171-3.13.11
    - NIST-800-53-IA-5
    - NIST-800-53-SC-13
    - NIST-800-53-AC-17(2)
    - NIST-800-53-IA-7
    - CJIS-5.10.1.2

- name: revert prelinking binaries
  command: /usr/sbin/prelink -ua
  when:
    - prelink_exists.stat.exists == True
    - ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - grub2_enable_fips_mode
    - high_severity
    - restrict_strategy
    - high_complexity
    - medium_disruption
    - reboot_required
    - CCE-80359-3
    - DISA-STIG-RHEL-07-021350
    - NIST-800-171-3.13.8
    - NIST-800-171-3.13.11
    - NIST-800-53-IA-5
    - NIST-800-53-SC-13
    - NIST-800-53-AC-17(2)
    - NIST-800-53-IA-7
    - CJIS-5.10.1.2

- name: Check if system supports AES-NI
  command: grep -q -m1 -o aes /proc/cpuinfo
  failed_when: aesni_supported.rc > 1
  register: aesni_supported
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - grub2_enable_fips_mode
    - high_severity
    - restrict_strategy
    - high_complexity
    - medium_disruption
    - reboot_required
    - CCE-80359-3
    - DISA-STIG-RHEL-07-021350
    - NIST-800-171-3.13.8
    - NIST-800-171-3.13.11
    - NIST-800-53-IA-5
    - NIST-800-53-SC-13
    - NIST-800-53-AC-17(2)
    - NIST-800-53-IA-7
    - CJIS-5.10.1.2

- name: Ensure dracut-fips-aesni is installed
  package:
    name: dracut-fips-aesni
    state: present
  when:
    - aesni_supported.rc == 0
    - ansible_distribution == 'RedHat'
    - ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - grub2_enable_fips_mode
    - high_severity
    - restrict_strategy
    - high_complexity
    - medium_disruption
    - reboot_required
    - CCE-80359-3
    - DISA-STIG-RHEL-07-021350
    - NIST-800-171-3.13.8
    - NIST-800-171-3.13.11
    - NIST-800-53-IA-5
    - NIST-800-53-SC-13
    - NIST-800-53-AC-17(2)
    - NIST-800-53-IA-7
    - CJIS-5.10.1.2

- name: install dracut-fips
  package:
    name: dracut-fips
    state: present
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - grub2_enable_fips_mode
    - high_severity
    - restrict_strategy
    - high_complexity
    - medium_disruption
    - reboot_required
    - CCE-80359-3
    - DISA-STIG-RHEL-07-021350
    - NIST-800-171-3.13.8
    - NIST-800-171-3.13.11
    - NIST-800-53-IA-5
    - NIST-800-53-SC-13
    - NIST-800-53-AC-17(2)
    - NIST-800-53-IA-7
    - CJIS-5.10.1.2

- name: Rebuild initramfs
  command: dracut -f
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - grub2_enable_fips_mode
    - high_severity
    - restrict_strategy
    - high_complexity
    - medium_disruption
    - reboot_required
    - CCE-80359-3
    - DISA-STIG-RHEL-07-021350
    - NIST-800-171-3.13.8
    - NIST-800-171-3.13.11
    - NIST-800-53-IA-5
    - NIST-800-53-SC-13
    - NIST-800-53-AC-17(2)
    - NIST-800-53-IA-7
    - CJIS-5.10.1.2

- name: check fips argument exists
  command: grep 'GRUB_CMDLINE_LINUX.*fips=' /etc/default/grub
  failed_when: false
  register: fipsargcheck
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - grub2_enable_fips_mode
    - high_severity
    - restrict_strategy
    - high_complexity
    - medium_disruption
    - reboot_required
    - CCE-80359-3
    - DISA-STIG-RHEL-07-021350
    - NIST-800-171-3.13.8
    - NIST-800-171-3.13.11
    - NIST-800-53-IA-5
    - NIST-800-53-SC-13
    - NIST-800-53-AC-17(2)
    - NIST-800-53-IA-7
    - CJIS-5.10.1.2

- name: replace existing fips argument
  replace:
    path: /etc/default/grub
    regexp: fips=.
    replace: fips=1
  when:
    - fipsargcheck.rc == 0
    - ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - grub2_enable_fips_mode
    - high_severity
    - restrict_strategy
    - high_complexity
    - medium_disruption
    - reboot_required
    - CCE-80359-3
    - DISA-STIG-RHEL-07-021350
    - NIST-800-171-3.13.8
    - NIST-800-171-3.13.11
    - NIST-800-53-IA-5
    - NIST-800-53-SC-13
    - NIST-800-53-AC-17(2)
    - NIST-800-53-IA-7
    - CJIS-5.10.1.2

- name: add fips argument
  replace:
    path: /etc/default/grub
    regexp: (GRUB_CMDLINE_LINUX=.*)"
    replace: \1 fips=1"
  when:
    - fipsargcheck.rc != 0
    - ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - grub2_enable_fips_mode
    - high_severity
    - restrict_strategy
    - high_complexity
    - medium_disruption
    - reboot_required
    - CCE-80359-3
    - DISA-STIG-RHEL-07-021350
    - NIST-800-171-3.13.8
    - NIST-800-171-3.13.11
    - NIST-800-53-IA-5
    - NIST-800-53-SC-13
    - NIST-800-53-AC-17(2)
    - NIST-800-53-IA-7
    - CJIS-5.10.1.2

- name: get boot device uuid
  command: findmnt --noheadings --output uuid --target /boot
  register: bootuuid
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - grub2_enable_fips_mode
    - high_severity
    - restrict_strategy
    - high_complexity
    - medium_disruption
    - reboot_required
    - CCE-80359-3
    - DISA-STIG-RHEL-07-021350
    - NIST-800-171-3.13.8
    - NIST-800-171-3.13.11
    - NIST-800-53-IA-5
    - NIST-800-53-SC-13
    - NIST-800-53-AC-17(2)
    - NIST-800-53-IA-7
    - CJIS-5.10.1.2

- name: check boot argument exists
  command: grep 'GRUB_CMDLINE_LINUX.*boot=' /etc/default/grub
  failed_when: false
  register: bootargcheck
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - grub2_enable_fips_mode
    - high_severity
    - restrict_strategy
    - high_complexity
    - medium_disruption
    - reboot_required
    - CCE-80359-3
    - DISA-STIG-RHEL-07-021350
    - NIST-800-171-3.13.8
    - NIST-800-171-3.13.11
    - NIST-800-53-IA-5
    - NIST-800-53-SC-13
    - NIST-800-53-AC-17(2)
    - NIST-800-53-IA-7
    - CJIS-5.10.1.2

- name: replace existing boot argument
  replace:
    path: /etc/default/grub
    regexp: boot=\w*-\w*-\w*-\w*-\w*
    replace: boot={{ bootuuid.stdout }}
  when:
    - bootargcheck.rc == 0
    - ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - grub2_enable_fips_mode
    - high_severity
    - restrict_strategy
    - high_complexity
    - medium_disruption
    - reboot_required
    - CCE-80359-3
    - DISA-STIG-RHEL-07-021350
    - NIST-800-171-3.13.8
    - NIST-800-171-3.13.11
    - NIST-800-53-IA-5
    - NIST-800-53-SC-13
    - NIST-800-53-AC-17(2)
    - NIST-800-53-IA-7
    - CJIS-5.10.1.2

- name: add boot argument
  replace:
    path: /etc/default/grub
    regexp: (GRUB_CMDLINE_LINUX=.*)"
    replace: \1 boot=UUID={{ bootuuid.stdout }}"
  when:
    - bootargcheck.rc != 0
    - ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - grub2_enable_fips_mode
    - high_severity
    - restrict_strategy
    - high_complexity
    - medium_disruption
    - reboot_required
    - CCE-80359-3
    - DISA-STIG-RHEL-07-021350
    - NIST-800-171-3.13.8
    - NIST-800-171-3.13.11
    - NIST-800-53-IA-5
    - NIST-800-53-SC-13
    - NIST-800-53-AC-17(2)
    - NIST-800-53-IA-7
    - CJIS-5.10.1.2

- name: update bootloader menu
  command: /sbin/grubby --update-kernel=ALL --args="fips=1 boot=UUID={{ bootuuid.stdout
    }}"
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - grub2_enable_fips_mode
    - high_severity
    - restrict_strategy
    - high_complexity
    - medium_disruption
    - reboot_required
    - CCE-80359-3
    - DISA-STIG-RHEL-07-021350
    - NIST-800-171-3.13.8
    - NIST-800-171-3.13.11
    - NIST-800-53-IA-5
    - NIST-800-53-SC-13
    - NIST-800-53-AC-17(2)
    - NIST-800-53-IA-7
    - CJIS-5.10.1.2
Remediation Anaconda snippet:   (show)


package --add=dracut-fips
Group   Updating Software   Group contains 4 rules

[ref]   The yum command line tool is used to install and update software packages. The system also provides a graphical software update tool in the System menu, in the Administration submenu, called Software Update.

Red Hat Enterprise Linux 7 systems contain an installed software catalog called the RPM database, which records metadata of installed packages. Consistently using yum or the graphical Software Update for all software installation allows for insight into the current inventory of installed software on the system.

Rule   Ensure gpgcheck Enabled for All yum Package Repositories   [ref]

To ensure signature checking is not disabled for any repos, remove any lines from files in /etc/yum.repos.d of the form:

gpgcheck=0

Rationale:

Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. Certificates used to verify the software must be from an approved Certificate Authority (CA)."

Severity: 
high
Identifiers and References

Identifiers:  CCE-26876-3

References:  NT28(R15), 11, 2, 3, 9, 5.10.4.1, APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02, 3.4.8, CCI-001749, 164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i), 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6, A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, CM-5(3), CM-11(a), SI-7, MA-1(b), PR.DS-6, PR.DS-8, PR.IP-1, FAU_GEN.1.1.c, Req-6.2, SRG-OS-000366-GPOS-00153, SRG-OS-000366-VMM-001430, SRG-OS-000370-VMM-001460, SRG-OS-000404-VMM-001650

Remediation Shell script:   (show)

sed -i 's/gpgcheck\s*=.*/gpgcheck=1/g' /etc/yum.repos.d/*
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
- name: Find All yum Repositories
  find:
    paths: /etc/yum.repos.d/
    patterns: '*.repo'
    contains: ^\[.+]$
  register: yum_find
  tags:
    - ensure_gpgcheck_never_disabled
    - high_severity
    - unknown_strategy
    - low_complexity
    - medium_disruption
    - no_reboot_needed
    - CCE-26876-3
    - PCI-DSS-Req-6.2
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-11(a)
    - NIST-800-53-SI-7
    - NIST-800-53-MA-1(b)
    - CJIS-5.10.4.1

- name: Ensure gpgcheck Enabled For All yum Package Repositories
  with_items: '{{ yum_find.files }}'
  lineinfile:
    create: true
    dest: '{{ item.path }}'
    regexp: ^gpgcheck
    line: gpgcheck=1
  tags:
    - ensure_gpgcheck_never_disabled
    - high_severity
    - unknown_strategy
    - low_complexity
    - medium_disruption
    - no_reboot_needed
    - CCE-26876-3
    - PCI-DSS-Req-6.2
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-11(a)
    - NIST-800-53-SI-7
    - NIST-800-53-MA-1(b)
    - CJIS-5.10.4.1

Rule   Ensure Red Hat GPG Key Installed   [ref]

To ensure the system can cryptographically verify base software packages come from Red Hat (and to connect to the Red Hat Network to receive them), the Red Hat GPG key must properly be installed. To install the Red Hat GPG key, run:

$ sudo subscription-manager register
If the system is not connected to the Internet or an RHN Satellite, then install the Red Hat GPG key from trusted media such as the Red Hat installation CD-ROM or DVD. Assuming the disc is mounted in /media/cdrom, use the following command as the root user to import it into the keyring:
$ sudo rpm --import /media/cdrom/RPM-GPG-KEY
Alternatively, the key may be pre-loaded during the RHEL installation. In such cases, the key can be installed by running the following command:
sudo rpm --import /etc/pki/rpm-gpg/RPM-GPG-key-redhat-release

Rationale:

Changes to software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor. The Red Hat GPG key is necessary to cryptographically verify packages are from Red Hat.

Severity: 
high
Identifiers and References

Identifiers:  CCE-26957-1

References:  NT28(R15), 1.2.3, 11, 2, 3, 9, 5.10.4.1, APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02, 3.4.8, CCI-001749, 164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i), 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6, A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, CM-5(3), CM-11(a), SI-7, MA-1(b), PR.DS-6, PR.DS-8, PR.IP-1, FAU_GEN.1.1.c, Req-6.2, SRG-OS-000366-GPOS-00153, SRG-OS-000366-VMM-001430, SRG-OS-000370-VMM-001460, SRG-OS-000404-VMM-001650

Remediation Shell script:   (show)

# The two fingerprints below are retrieved from https://access.redhat.com/security/team/key
readonly REDHAT_RELEASE_2_FINGERPRINT="567E347AD0044ADE55BA8A5F199E2F91FD431D51"
readonly REDHAT_AUXILIARY_FINGERPRINT="43A6E49C4A38F4BE9ABF2A5345689C882FA658E0"
# Location of the key we would like to import (once it's integrity verified)
readonly REDHAT_RELEASE_KEY="/etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release"

RPM_GPG_DIR_PERMS=$(stat -c %a "$(dirname "$REDHAT_RELEASE_KEY")")

# Verify /etc/pki/rpm-gpg directory permissions are safe
if [ "${RPM_GPG_DIR_PERMS}" -le "755" ]
then
  # If they are safe, try to obtain fingerprints from the key file
  # (to ensure there won't be e.g. CRC error).

  readarray -t GPG_OUT < <(gpg --with-fingerprint --with-colons "$REDHAT_RELEASE_KEY" | grep "^fpr" | cut -d ":" -f 10)

  GPG_RESULT=$?
  # No CRC error, safe to proceed
  if [ "${GPG_RESULT}" -eq "0" ]
  then
    echo "${GPG_OUT[*]}" | grep -vE "${REDHAT_RELEASE_2_FINGERPRINT}|${REDHAT_AUXILIARY_FINGERPRINT}" || {
      # If $REDHAT_RELEASE_KEY file doesn't contain any keys with unknown fingerprint, import it
      rpm --import "${REDHAT_RELEASE_KEY}"
    }
  fi
fi
Remediation Ansible snippet:   (show)

Complexity:medium
Disruption:medium
Strategy:restrict
- name: Read permission of GPG key directory
  stat:
    path: /etc/pki/rpm-gpg/
  register: gpg_key_directory_permission
  check_mode: false
  tags:
    - ensure_redhat_gpgkey_installed
    - high_severity
    - restrict_strategy
    - medium_complexity
    - medium_disruption
    - no_reboot_needed
    - CCE-26957-1
    - PCI-DSS-Req-6.2
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-11(a)
    - NIST-800-53-SI-7
    - NIST-800-53-MA-1(b)
    - CJIS-5.10.4.1

- name: Read signatures in GPG key
  shell: |
    set -o pipefail
    gpg --with-fingerprint --with-colons "/etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release" | grep "^fpr" | cut -d ":" -f 10
  args:
    warn: false
    executable: /bin/bash
  changed_when: false
  register: gpg_fingerprints
  check_mode: false
  tags:
    - ensure_redhat_gpgkey_installed
    - high_severity
    - restrict_strategy
    - medium_complexity
    - medium_disruption
    - no_reboot_needed
    - CCE-26957-1
    - PCI-DSS-Req-6.2
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-11(a)
    - NIST-800-53-SI-7
    - NIST-800-53-MA-1(b)
    - CJIS-5.10.4.1

- name: Set Fact - Valid fingerprints
  set_fact:
    gpg_valid_fingerprints: ("567E347AD0044ADE55BA8A5F199E2F91FD431D51" "43A6E49C4A38F4BE9ABF2A5345689C882FA658E0")
  tags:
    - ensure_redhat_gpgkey_installed
    - high_severity
    - restrict_strategy
    - medium_complexity
    - medium_disruption
    - no_reboot_needed
    - CCE-26957-1
    - PCI-DSS-Req-6.2
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-11(a)
    - NIST-800-53-SI-7
    - NIST-800-53-MA-1(b)
    - CJIS-5.10.4.1

- name: Import RedHat GPG key
  rpm_key:
    state: present
    key: /etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
  when:
    - gpg_key_directory_permission.stat.mode <= '0755'
    - ( gpg_fingerprints.stdout_lines | difference(gpg_valid_fingerprints)) | length
      == 0
    - gpg_fingerprints.stdout_lines | length > 0
    - ansible_distribution == "RedHat"
  tags:
    - ensure_redhat_gpgkey_installed
    - high_severity
    - restrict_strategy
    - medium_complexity
    - medium_disruption
    - no_reboot_needed
    - CCE-26957-1
    - PCI-DSS-Req-6.2
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-11(a)
    - NIST-800-53-SI-7
    - NIST-800-53-MA-1(b)
    - CJIS-5.10.4.1

Rule   Ensure gpgcheck Enabled In Main yum Configuration   [ref]

The gpgcheck option controls whether RPM packages' signatures are always checked prior to installation. To configure yum to check package signatures before installing them, ensure the following line appears in /etc/yum.conf in the [main] section:

gpgcheck=1

Rationale:

Changes to any software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor.
Accordingly, patches, service packs, device drivers, or operating system components must be signed with a certificate recognized and approved by the organization.
Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. Certificates used to verify the software must be from an approved Certificate Authority (CA).

Severity: 
high
Identifiers and References

Identifiers:  CCE-26989-4

References:  RHEL-07-020050, SV-86601r2_rule, NT28(R15), 1.2.2, 11, 2, 3, 9, 5.10.4.1, APO01.06, BAI03.05, BAI06.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS06.02, 3.4.8, CCI-001749, 164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i), 4.3.4.3.2, 4.3.4.3.3, 4.3.4.4.4, SR 3.1, SR 3.3, SR 3.4, SR 3.8, SR 7.6, A.11.2.4, A.12.1.2, A.12.2.1, A.12.5.1, A.12.6.2, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, CM-5(3), CM-11, SI-7, MA-1(b), PR.DS-6, PR.DS-8, PR.IP-1, FAU_GEN.1.1.c, Req-6.2, SRG-OS-000366-GPOS-00153, SRG-OS-000366-VMM-001430, SRG-OS-000370-VMM-001460, SRG-OS-000404-VMM-001650

Remediation Shell script:   (show)

# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append "/etc/yum.conf" '^gpgcheck' '1' 'CCE-26989-4'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
- name: Check existence of yum on Fedora
  stat:
    path: /etc/yum.conf
  register: yum_config_file
  check_mode: false
  when: ansible_distribution == "Fedora"
  tags:
    - ensure_gpgcheck_globally_activated
    - high_severity
    - unknown_strategy
    - low_complexity
    - medium_disruption
    - no_reboot_needed
    - CCE-26989-4
    - PCI-DSS-Req-6.2
    - DISA-STIG-RHEL-07-020050
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-11
    - NIST-800-53-SI-7
    - NIST-800-53-MA-1(b)
    - CJIS-5.10.4.1

- name: Ensure GPG check is globally activated (yum)
  ini_file:
    dest: /etc/yum.conf
    section: main
    option: gpgcheck
    value: 1
    create: false
  when: (ansible_distribution == "RedHat" or ansible_distribution == "CentOS" or yum_config_file.stat.exists)
  tags:
    - ensure_gpgcheck_globally_activated
    - high_severity
    - unknown_strategy
    - low_complexity
    - medium_disruption
    - no_reboot_needed
    - CCE-26989-4
    - PCI-DSS-Req-6.2
    - DISA-STIG-RHEL-07-020050
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-11
    - NIST-800-53-SI-7
    - NIST-800-53-MA-1(b)
    - CJIS-5.10.4.1

- name: Ensure GPG check is globally activated (dnf)
  ini_file:
    dest: /etc/dnf/dnf.conf
    section: main
    option: gpgcheck
    value: 1
    create: false
  when: ansible_distribution == "Fedora"
  tags:
    - ensure_gpgcheck_globally_activated
    - high_severity
    - unknown_strategy
    - low_complexity
    - medium_disruption
    - no_reboot_needed
    - CCE-26989-4
    - PCI-DSS-Req-6.2
    - DISA-STIG-RHEL-07-020050
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-11
    - NIST-800-53-SI-7
    - NIST-800-53-MA-1(b)
    - CJIS-5.10.4.1

Rule   Ensure gpgcheck Enabled for Local Packages   [ref]

yum should be configured to verify the signature(s) of local packages prior to installation. To configure yum to verify signatures of local packages, set the localpkg_gpgcheck to 1 in /etc/yum.conf.

Rationale:

Changes to any software components can have significant effects to the overall security of the operating system. This requirement ensures the software has not been tampered and has been provided by a trusted vendor.

Accordingly, patches, service packs, device drivers, or operating system components must be signed with a certificate recognized and approved by the organization.

Severity: 
high
Identifiers and References

Identifiers:  CCE-80347-8

References:  RHEL-07-020060, SV-86603r2_rule, NT28(R15), 11, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, 3.4.8, CCI-001749, 164.308(a)(1)(ii)(D), 164.312(b), 164.312(c)(1), 164.312(c)(2), 164.312(e)(2)(i), 4.3.4.3.2, 4.3.4.3.3, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, CM-5(3), CM-11, PR.IP-1, FAU_GEN.1.1.c, SRG-OS-000366-GPOS-00153, SRG-OS-000366-VMM-001430, SRG-OS-000370-VMM-001460, SRG-OS-000404-VMM-001650

Remediation Shell script:   (show)

# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/yum.conf' '^localpkg_gpgcheck' '1' 'CCE-80347-8'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
- name: Check existence of yum on Fedora
  stat:
    path: /etc/yum.conf
  register: yum_config_file
  check_mode: false
  when: ansible_distribution == "Fedora"
  tags:
    - ensure_gpgcheck_local_packages
    - high_severity
    - unknown_strategy
    - low_complexity
    - medium_disruption
    - no_reboot_needed
    - CCE-80347-8
    - DISA-STIG-RHEL-07-020060
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-11

- name: Ensure GPG check Enabled for Local Packages (Yum)
  ini_file:
    dest: /etc/yum.conf
    section: main
    option: localpkg_gpgcheck
    value: 1
    create: true
  when: (ansible_distribution == "RedHat" or ansible_distribution == "CentOS" or yum_config_file.stat.exists)
  tags:
    - ensure_gpgcheck_local_packages
    - high_severity
    - unknown_strategy
    - low_complexity
    - medium_disruption
    - no_reboot_needed
    - CCE-80347-8
    - DISA-STIG-RHEL-07-020060
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-11

- name: Ensure GPG check Enabled for Local Packages (DNF)
  ini_file:
    dest: /etc/dnf/dnf.conf
    section: main
    option: localpkg_gpgcheck
    value: 1
    create: true
  when: ansible_distribution == "Fedora"
  tags:
    - ensure_gpgcheck_local_packages
    - high_severity
    - unknown_strategy
    - low_complexity
    - medium_disruption
    - no_reboot_needed
    - CCE-80347-8
    - DISA-STIG-RHEL-07-020060
    - NIST-800-171-3.4.8
    - NIST-800-53-CM-5(3)
    - NIST-800-53-CM-11
Group   Network Configuration and Firewalls   Group contains 11 groups and 26 rules

[ref]   Most systems must be connected to a network of some sort, and this brings with it the substantial risk of network attack. This section discusses the security impact of decisions about networking which must be made when configuring a system.

This section also discusses firewalls, network access controls, and other network security frameworks, which allow system-level rules to be written that can limit an attackers' ability to connect to your system. These rules can specify that network traffic should be allowed or denied from certain IP addresses, hosts, and networks. The rules can also specify which of the system's network services are available to particular hosts or networks.

Group   IPv6   Group contains 2 groups and 6 rules

[ref]   The system includes support for Internet Protocol version 6. A major and often-mentioned improvement over IPv4 is its enormous increase in the number of available addresses. Another important feature is its support for automatic configuration of many network settings.

Group   Configure IPv6 Settings if Necessary   Group contains 1 group and 6 rules

[ref]   A major feature of IPv6 is the extent to which systems implementing it can automatically configure their networking devices using information from the network. From a security perspective, manually configuring important configuration information is preferable to accepting it from the network in an unauthenticated fashion.

Group   Disable Automatic Configuration   Group contains 6 rules

[ref]   Disable the system's acceptance of router advertisements and redirects by adding or correcting the following line in /etc/sysconfig/network (note that this does not disable sending router solicitations):

IPV6_AUTOCONF=no

Rule   Disable Kernel Parameter for Accepting Source-Routed Packets on IPv6 Interfaces by Default   [ref]

To set the runtime status of the net.ipv6.conf.default.accept_source_route kernel parameter, run the following command:

$ sudo sysctl -w net.ipv6.conf.default.accept_source_route=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.default.accept_source_route = 0

Rationale:

Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routerd traffic, such as when IPv6 forwarding is enabled and the system is functioning as a router. Accepting source-routed packets in the IPv6 protocol has few legitimate uses. It should be disabled unless it is absolutely required.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80355-1

References:  NT28(R22), 1, 12, 13, 14, 15, 16, 18, 4, 6, 8, 9, APO01.06, APO13.01, DSS01.05, DSS03.01, DSS05.02, DSS05.04, DSS05.07, DSS06.02, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.4.3.3, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-4, DE.AE-1, ID.AM-3, PR.AC-5, PR.DS-5, PR.PT-4

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv6_conf_default_accept_source_route_value="0"

#
# Set runtime for net.ipv6.conf.default.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_source_route=$sysctl_net_ipv6_conf_default_accept_source_route_value

#
# If net.ipv6.conf.default.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_source_route = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv6.conf.default.accept_source_route' "$sysctl_net_ipv6_conf_default_accept_source_route_value" 'CCE-80355-1'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv6_conf_default_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_default_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.default.accept_source_route is set
  sysctl:
    name: net.ipv6.conf.default.accept_source_route
    value: '{{ sysctl_net_ipv6_conf_default_accept_source_route_value }}'
    state: present
    reload: true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sysctl_net_ipv6_conf_default_accept_source_route
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-80355-1
    - NIST-800-171-3.1.20
    - NIST-800-53-AC-4

Rule   Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv6 Interfaces   [ref]

To set the runtime status of the net.ipv6.conf.all.accept_source_route kernel parameter, run the following command:

$ sudo sysctl -w net.ipv6.conf.all.accept_source_route=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.all.accept_source_route = 0

Rationale:

Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routerd traffic, such as when IPv6 forwarding is enabled and the system is functioning as a router.

Accepting source-routed packets in the IPv6 protocol has few legitimate uses. It should be disabled unless it is absolutely required.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80179-5

References:  RHEL-07-040830, SV-86943r2_rule, NT28(R22), 1, 12, 13, 14, 15, 16, 18, 4, 6, 8, 9, APO01.06, APO13.01, DSS01.05, DSS03.01, DSS05.02, DSS05.04, DSS05.07, DSS06.02, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.4.3.3, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-4, DE.AE-1, ID.AM-3, PR.AC-5, PR.DS-5, PR.PT-4, SRG-OS-000480-GPOS-00227

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv6_conf_all_accept_source_route_value="0"

#
# Set runtime for net.ipv6.conf.all.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv6.conf.all.accept_source_route=$sysctl_net_ipv6_conf_all_accept_source_route_value

#
# If net.ipv6.conf.all.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_source_route = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv6.conf.all.accept_source_route' "$sysctl_net_ipv6_conf_all_accept_source_route_value" 'CCE-80179-5'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv6_conf_all_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_all_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.all.accept_source_route is set
  sysctl:
    name: net.ipv6.conf.all.accept_source_route
    value: '{{ sysctl_net_ipv6_conf_all_accept_source_route_value }}'
    state: present
    reload: true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sysctl_net_ipv6_conf_all_accept_source_route
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-80179-5
    - DISA-STIG-RHEL-07-040830
    - NIST-800-171-3.1.20
    - NIST-800-53-AC-4

Rule   Disable Accepting ICMP Redirects for All IPv6 Interfaces   [ref]

To set the runtime status of the net.ipv6.conf.all.accept_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv6.conf.all.accept_redirects=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.all.accept_redirects = 0

Rationale:

An illicit ICMP redirect message could result in a man-in-the-middle attack.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80182-9

References:  NT28(R22), 3.3.2, 11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.1.20, CCI-001551, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7, PR.IP-1, PR.PT-3

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv6_conf_all_accept_redirects_value="0"

#
# Set runtime for net.ipv6.conf.all.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv6.conf.all.accept_redirects=$sysctl_net_ipv6_conf_all_accept_redirects_value

#
# If net.ipv6.conf.all.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_redirects = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv6.conf.all.accept_redirects' "$sysctl_net_ipv6_conf_all_accept_redirects_value" 'CCE-80182-9'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv6_conf_all_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_all_accept_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.all.accept_redirects is set
  sysctl:
    name: net.ipv6.conf.all.accept_redirects
    value: '{{ sysctl_net_ipv6_conf_all_accept_redirects_value }}'
    state: present
    reload: true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sysctl_net_ipv6_conf_all_accept_redirects
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-80182-9
    - NIST-800-171-3.1.20
    - NIST-800-53-CM-7

Rule   Disable Accepting Router Advertisements on all IPv6 Interfaces by Default   [ref]

To set the runtime status of the net.ipv6.conf.default.accept_ra kernel parameter, run the following command:

$ sudo sysctl -w net.ipv6.conf.default.accept_ra=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.default.accept_ra = 0

Rationale:

An illicit router advertisement message could result in a man-in-the-middle attack.

Severity: 
unknown
Identifiers and References

Identifiers:  CCE-80181-1

References:  3.3.1, 11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.1.20, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7, PR.IP-1, PR.PT-3

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv6_conf_default_accept_ra_value="0"

#
# Set runtime for net.ipv6.conf.default.accept_ra
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_ra=$sysctl_net_ipv6_conf_default_accept_ra_value

#
# If net.ipv6.conf.default.accept_ra present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_ra = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv6.conf.default.accept_ra' "$sysctl_net_ipv6_conf_default_accept_ra_value" 'CCE-80181-1'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv6_conf_default_accept_ra_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_default_accept_ra_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.default.accept_ra is set
  sysctl:
    name: net.ipv6.conf.default.accept_ra
    value: '{{ sysctl_net_ipv6_conf_default_accept_ra_value }}'
    state: present
    reload: true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sysctl_net_ipv6_conf_default_accept_ra
    - unknown_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-80181-1
    - NIST-800-171-3.1.20
    - NIST-800-53-CM-7

Rule   Configure Accepting Router Advertisements on All IPv6 Interfaces   [ref]

To set the runtime status of the net.ipv6.conf.all.accept_ra kernel parameter, run the following command:

$ sudo sysctl -w net.ipv6.conf.all.accept_ra=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.all.accept_ra = 0

Rationale:

An illicit router advertisement message could result in a man-in-the-middle attack.

Severity: 
unknown
Identifiers and References

Identifiers:  CCE-80180-3

References:  3.3.1, 11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.1.20, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7, PR.IP-1, PR.PT-3

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv6_conf_all_accept_ra_value="0"

#
# Set runtime for net.ipv6.conf.all.accept_ra
#
/sbin/sysctl -q -n -w net.ipv6.conf.all.accept_ra=$sysctl_net_ipv6_conf_all_accept_ra_value

#
# If net.ipv6.conf.all.accept_ra present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.all.accept_ra = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv6.conf.all.accept_ra' "$sysctl_net_ipv6_conf_all_accept_ra_value" 'CCE-80180-3'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv6_conf_all_accept_ra_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_all_accept_ra_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.all.accept_ra is set
  sysctl:
    name: net.ipv6.conf.all.accept_ra
    value: '{{ sysctl_net_ipv6_conf_all_accept_ra_value }}'
    state: present
    reload: true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sysctl_net_ipv6_conf_all_accept_ra
    - unknown_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-80180-3
    - NIST-800-171-3.1.20
    - NIST-800-53-CM-7

Rule   Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv6 Interfaces   [ref]

To set the runtime status of the net.ipv6.conf.default.accept_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv6.conf.default.accept_redirects=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.default.accept_redirects = 0

Rationale:

An illicit ICMP redirect message could result in a man-in-the-middle attack.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80183-7

References:  NT28(R22), 3.3.2, 11, 14, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.1.20, CCI-001551, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7, PR.IP-1, PR.PT-3

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv6_conf_default_accept_redirects_value="0"

#
# Set runtime for net.ipv6.conf.default.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_redirects=$sysctl_net_ipv6_conf_default_accept_redirects_value

#
# If net.ipv6.conf.default.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_redirects = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv6.conf.default.accept_redirects' "$sysctl_net_ipv6_conf_default_accept_redirects_value" 'CCE-80183-7'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv6_conf_default_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_default_accept_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.default.accept_redirects is set
  sysctl:
    name: net.ipv6.conf.default.accept_redirects
    value: '{{ sysctl_net_ipv6_conf_default_accept_redirects_value }}'
    state: present
    reload: true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sysctl_net_ipv6_conf_default_accept_redirects
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-80183-7
    - NIST-800-171-3.1.20
    - NIST-800-53-CM-7
Group   firewalld   Group contains 1 group and 1 rule

[ref]   The dynamic firewall daemon firewalld provides a dynamically managed firewall with support for network “zones” to assign a level of trust to a network and its associated connections and interfaces. It has support for IPv4 and IPv6 firewall settings. It supports Ethernet bridges and has a separation of runtime and permanent configuration options. It also has an interface for services or applications to add firewall rules directly.
A graphical configuration tool, firewall-config, is used to configure firewalld, which in turn uses iptables tool to communicate with Netfilter in the kernel which implements packet filtering.
The firewall service provided by firewalld is dynamic rather than static because changes to the configuration can be made at anytime and are immediately implemented. There is no need to save or apply the changes. No unintended disruption of existing network connections occurs as no part of the firewall has to be reloaded.

Group   Inspect and Activate Default firewalld Rules   Group contains 1 rule

[ref]   Firewalls can be used to separate networks into different zones based on the level of trust the user has decided to place on the devices and traffic within that network. NetworkManager informs firewalld to which zone an interface belongs. An interface's assigned zone can be changed by NetworkManager or via the firewall-config tool.
The zone settings in /etc/firewalld/ are a range of preset settings which can be quickly applied to a network interface. These are the zones provided by firewalld sorted according to the default trust level of the zones from untrusted to trusted:

  • drop

    Any incoming network packets are dropped, there is no reply. Only outgoing network connections are possible.

  • block

    Any incoming network connections are rejected with an icmp-host-prohibited message for IPv4 and icmp6-adm-prohibited for IPv6. Only network connections initiated from within the system are possible.

  • public

    For use in public areas. You do not trust the other computers on the network to not harm your computer. Only selected incoming connections are accepted.

  • external

    For use on external networks with masquerading enabled especially for routers. You do not trust the other computers on the network to not harm your computer. Only selected incoming connections are accepted.

  • dmz

    For computers in your demilitarized zone that are publicly-accessible with limited access to your internal network. Only selected incoming connections are accepted.

  • work

    For use in work areas. You mostly trust the other computers on networks to not harm your computer. Only selected incoming connections are accepted.

  • home

    For use in home areas. You mostly trust the other computers on networks to not harm your computer. Only selected incoming connections are accepted.

  • internal

    For use on internal networks. You mostly trust the other computers on the networks to not harm your computer. Only selected incoming connections are accepted.

  • trusted

    All network connections are accepted.


It is possible to designate one of these zones to be the default zone. When interface connections are added to NetworkManager, they are assigned to the default zone. On installation, the default zone in firewalld is set to be the public zone.
To find out all the settings of a zone, for example the public zone, enter the following command as root:
# firewall-cmd --zone=public --list-all
Example output of this command might look like the following:
# firewall-cmd --zone=public --list-all
public
  interfaces:
  services: mdns dhcpv6-client ssh
  ports:
  forward-ports:
  icmp-blocks: source-quench
To view the network zones currently active, enter the following command as root:
# firewall-cmd --get-service
The following listing displays the result of this command on common Red Hat Enterprise Linux 7 system:
# firewall-cmd --get-service
amanda-client bacula bacula-client dhcp dhcpv6 dhcpv6-client dns ftp
high-availability http https imaps ipp ipp-client ipsec kerberos kpasswd
ldap ldaps libvirt libvirt-tls mdns mountd ms-wbt mysql nfs ntp openvpn
pmcd pmproxy pmwebapi pmwebapis pop3s postgresql proxy-dhcp radius rpc-bind
samba samba-client smtp ssh telnet tftp tftp-client transmission-client
vnc-server wbem-https
Finally to view the network zones that will be active after the next firewalld service reload, enter the following command as root:
# firewall-cmd --get-service --permanent

Rule   Verify firewalld Enabled   [ref]

The firewalld service can be enabled with the following command:

$ sudo systemctl enable firewalld.service

Rationale:

Access control methods provide the ability to enhance system security posture by restricting services and known good IP addresses and address ranges. This prevents connections from unknown hosts and protocols.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80998-8

References:  RHEL-07-040520, SV-86897r2_rule, 4.7, 11, 3, 9, BAI10.01, BAI10.02, BAI10.03, BAI10.05, 3.1.3, 3.4.7, CCI-000366, 4.3.4.3.2, 4.3.4.3.3, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, CM-6(b), PR.IP-1, FMT_MOF_EXT.1, SRG-OS-000480-GPOS-00227

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

SYSTEMCTL_EXEC='/usr/bin/systemctl'
"$SYSTEMCTL_EXEC" start 'firewalld.service'
"$SYSTEMCTL_EXEC" enable 'firewalld.service'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
- name: Enable service firewalld
  service:
    name: firewalld
    enabled: 'yes'
    state: started
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - service_firewalld_enabled
    - medium_severity
    - enable_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-80998-8
    - DISA-STIG-RHEL-07-040520
    - NIST-800-171-3.1.3
    - NIST-800-171-3.4.7
    - NIST-800-53-CM-6(b)
Group   Kernel Parameters Which Affect Networking   Group contains 2 groups and 16 rules

[ref]   The sysctl utility is used to set parameters which affect the operation of the Linux kernel. Kernel parameters which affect networking and have security implications are described here.

Group   Network Related Kernel Runtime Parameters for Hosts and Routers   Group contains 13 rules

[ref]   Certain kernel parameters should be set for systems which are acting as either hosts or routers to improve the system's ability defend against certain types of IPv4 protocol attacks.

Rule   Disable Kernel Parameter for Accepting Source-Routed Packets on IPv4 Interfaces by Default   [ref]

To set the runtime status of the net.ipv4.conf.default.accept_source_route kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.accept_source_route=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.accept_source_route = 0

Rationale:

Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures.
Accepting source-routed packets in the IPv4 protocol has few legitimate uses. It should be disabled unless it is absolutely required, such as when IPv4 forwarding is enabled and the system is legitimately functioning as a router.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80162-1

References:  RHEL-07-040620, SV-86909r2_rule, NT28(R22), 3.2.1, 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-000366, CCI-001551, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-4, CM-7, SC-5, SC-7, DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_conf_default_accept_source_route_value="0"

#
# Set runtime for net.ipv4.conf.default.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.accept_source_route=$sysctl_net_ipv4_conf_default_accept_source_route_value

#
# If net.ipv4.conf.default.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.accept_source_route = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.default.accept_source_route' "$sysctl_net_ipv4_conf_default_accept_source_route_value" 'CCE-80162-1'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_conf_default_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.accept_source_route is set
  sysctl:
    name: net.ipv4.conf.default.accept_source_route
    value: '{{ sysctl_net_ipv4_conf_default_accept_source_route_value }}'
    state: present
    reload: true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sysctl_net_ipv4_conf_default_accept_source_route
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-80162-1
    - DISA-STIG-RHEL-07-040620
    - NIST-800-171-3.1.20
    - NIST-800-53-AC-4
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - NIST-800-53-SC-7
    - CJIS-5.10.1.1

Rule   Enable Kernel Parameter to Ignore Bogus ICMP Error Responses on IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.icmp_ignore_bogus_error_responses kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.icmp_ignore_bogus_error_responses=1
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.icmp_ignore_bogus_error_responses = 1

Rationale:

Ignoring bogus ICMP error responses reduces log size, although some activity would not be logged.

Severity: 
unknown
Identifiers and References

Identifiers:  CCE-80166-2

References:  NT28(R22), 3.2.6, 1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, DSS06.06, 3.1.20, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.9.1.2, CM-7, SC-5, DE.CM-1, PR.DS-4, PR.IP-1, PR.PT-3

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value="1"

#
# Set runtime for net.ipv4.icmp_ignore_bogus_error_responses
#
/sbin/sysctl -q -n -w net.ipv4.icmp_ignore_bogus_error_responses=$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value

#
# If net.ipv4.icmp_ignore_bogus_error_responses present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.icmp_ignore_bogus_error_responses = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.icmp_ignore_bogus_error_responses' "$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value" 'CCE-80166-2'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value # promote to variable
  set_fact:
    sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.icmp_ignore_bogus_error_responses is set
  sysctl:
    name: net.ipv4.icmp_ignore_bogus_error_responses
    value: '{{ sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value }}'
    state: present
    reload: true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
    - unknown_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-80166-2
    - NIST-800-171-3.1.20
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5

Rule   Disable Kernel Parameter for Accepting ICMP Redirects by Default on IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.default.accept_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.accept_redirects=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.accept_redirects = 0

Rationale:

ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages modify the host's route table and are unauthenticated. An illicit ICMP redirect message could result in a man-in-the-middle attack.
This feature of the IPv4 protocol has few legitimate uses. It should be disabled unless absolutely required.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80163-9

References:  RHEL-07-040640, SV-86913r3_rule, NT28(R22), 3.2.2, 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-001551, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-4, CM-7, SC-5, SC-7, DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_conf_default_accept_redirects_value="0"

#
# Set runtime for net.ipv4.conf.default.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.accept_redirects=$sysctl_net_ipv4_conf_default_accept_redirects_value

#
# If net.ipv4.conf.default.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.accept_redirects = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.default.accept_redirects' "$sysctl_net_ipv4_conf_default_accept_redirects_value" 'CCE-80163-9'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_conf_default_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_accept_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.accept_redirects is set
  sysctl:
    name: net.ipv4.conf.default.accept_redirects
    value: '{{ sysctl_net_ipv4_conf_default_accept_redirects_value }}'
    state: present
    reload: true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sysctl_net_ipv4_conf_default_accept_redirects
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-80163-9
    - DISA-STIG-RHEL-07-040640
    - NIST-800-171-3.1.20
    - NIST-800-53-AC-4
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - NIST-800-53-SC-7
    - CJIS-5.10.1.1

Rule   Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces by Default   [ref]

To set the runtime status of the net.ipv4.conf.default.rp_filter kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.rp_filter=1
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.rp_filter = 1

Rationale:

Enabling reverse path filtering drops packets with source addresses that should not have been able to be received on the interface they were received on. It should not be used on systems which are routers for complicated networks, but is helpful for end hosts and routers serving small networks.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80168-8

References:  NT28(R22), 3.2.7, 1, 12, 13, 14, 15, 16, 18, 2, 4, 6, 7, 8, 9, APO01.06, APO13.01, BAI04.04, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.07, DSS06.02, 3.1.20, 4.2.3.4, 4.3.3.4, 4.4.3.3, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-4, SC-5, SC-7, DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.PT-4

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_conf_default_rp_filter_value="1"

#
# Set runtime for net.ipv4.conf.default.rp_filter
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.rp_filter=$sysctl_net_ipv4_conf_default_rp_filter_value

#
# If net.ipv4.conf.default.rp_filter present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.rp_filter = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.default.rp_filter' "$sysctl_net_ipv4_conf_default_rp_filter_value" 'CCE-80168-8'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_conf_default_rp_filter_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_rp_filter_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.rp_filter is set
  sysctl:
    name: net.ipv4.conf.default.rp_filter
    value: '{{ sysctl_net_ipv4_conf_default_rp_filter_value }}'
    state: present
    reload: true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sysctl_net_ipv4_conf_default_rp_filter
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-80168-8
    - NIST-800-171-3.1.20
    - NIST-800-53-AC-4
    - NIST-800-53-SC-5
    - NIST-800-53-SC-7

Rule   Disable Kernel Parameter for Accepting Secure ICMP Redirects on all IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.all.secure_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.secure_redirects=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.secure_redirects = 0

Rationale:

Accepting "secure" ICMP redirects (from those gateways listed as default gateways) has few legitimate uses. It should be disabled unless it is absolutely required.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80159-7

References:  NT28(R22), 3.2.3, 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-001503, CCI-001551, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-4, CM-7, SC-5, DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_conf_all_secure_redirects_value="0"

#
# Set runtime for net.ipv4.conf.all.secure_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.secure_redirects=$sysctl_net_ipv4_conf_all_secure_redirects_value

#
# If net.ipv4.conf.all.secure_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.secure_redirects = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.all.secure_redirects' "$sysctl_net_ipv4_conf_all_secure_redirects_value" 'CCE-80159-7'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_conf_all_secure_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_secure_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.secure_redirects is set
  sysctl:
    name: net.ipv4.conf.all.secure_redirects
    value: '{{ sysctl_net_ipv4_conf_all_secure_redirects_value }}'
    state: present
    reload: true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sysctl_net_ipv4_conf_all_secure_redirects
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-80159-7
    - NIST-800-171-3.1.20
    - NIST-800-53-AC-4
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5

Rule   Disable Kernel Parameter for Accepting Source-Routed Packets on all IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.all.accept_source_route kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.accept_source_route=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.accept_source_route = 0

Rationale:

Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures. This requirement applies only to the forwarding of source-routerd traffic, such as when IPv4 forwarding is enabled and the system is functioning as a router.

Accepting source-routed packets in the IPv4 protocol has few legitimate uses. It should be disabled unless it is absolutely required.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-27434-0

References:  RHEL-07-040610, SV-86907r2_rule, NT28(R22), 3.2.1, 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-4, CM-7, SC-5, DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_conf_all_accept_source_route_value="0"

#
# Set runtime for net.ipv4.conf.all.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.accept_source_route=$sysctl_net_ipv4_conf_all_accept_source_route_value

#
# If net.ipv4.conf.all.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.accept_source_route = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.all.accept_source_route' "$sysctl_net_ipv4_conf_all_accept_source_route_value" 'CCE-27434-0'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_conf_all_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_accept_source_route_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.accept_source_route is set
  sysctl:
    name: net.ipv4.conf.all.accept_source_route
    value: '{{ sysctl_net_ipv4_conf_all_accept_source_route_value }}'
    state: present
    reload: true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sysctl_net_ipv4_conf_all_accept_source_route
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-27434-0
    - DISA-STIG-RHEL-07-040610
    - NIST-800-171-3.1.20
    - NIST-800-53-AC-4
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5

Rule   Enable Kernel Parameter to Use TCP Syncookies on IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.tcp_syncookies kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.tcp_syncookies=1
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.tcp_syncookies = 1

Rationale:

A TCP SYN flood attack can cause a denial of service by filling a system's TCP connection table with connections in the SYN_RCVD state. Syncookies can be used to track a connection when a subsequent ACK is received, verifying the initiator is attempting a valid connection and is not a flood source. This feature is activated when a flood condition is detected, and enables the system to continue servicing valid connection requests.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-27495-1

References:  NT28(R22), 3.2.8, 1, 12, 13, 14, 15, 16, 18, 2, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.07, DSS06.02, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.4.3.3, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-4, SC-5(1)(2), SC-5(2), SC-5(3), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.PT-4, SRG-OS-000480-GPOS-00227

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_tcp_syncookies_value="1"

#
# Set runtime for net.ipv4.tcp_syncookies
#
/sbin/sysctl -q -n -w net.ipv4.tcp_syncookies=$sysctl_net_ipv4_tcp_syncookies_value

#
# If net.ipv4.tcp_syncookies present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.tcp_syncookies = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.tcp_syncookies' "$sysctl_net_ipv4_tcp_syncookies_value" 'CCE-27495-1'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_tcp_syncookies_value # promote to variable
  set_fact:
    sysctl_net_ipv4_tcp_syncookies_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.tcp_syncookies is set
  sysctl:
    name: net.ipv4.tcp_syncookies
    value: '{{ sysctl_net_ipv4_tcp_syncookies_value }}'
    state: present
    reload: true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sysctl_net_ipv4_tcp_syncookies
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-27495-1
    - NIST-800-171-3.1.20
    - NIST-800-53-AC-4
    - NIST-800-53-SC-5(1)(2)
    - NIST-800-53-SC-5(2)
    - NIST-800-53-SC-5(3)
    - CJIS-5.10.1.1

Rule   Disable Accepting ICMP Redirects for All IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.all.accept_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.accept_redirects=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.accept_redirects = 0

Rationale:

ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages modify the host's route table and are unauthenticated. An illicit ICMP redirect message could result in a man-in-the-middle attack.
This feature of the IPv4 protocol has few legitimate uses. It should be disabled unless absolutely required."

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80158-9

References:  RHEL-07-040641, SV-87827r4_rule, NT28(R22), 3.2.2, 1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9, 5.10.1.1, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, DSS06.06, 3.1.20, CCI-000366, CCI-001503, CCI-001551, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.9.1.2, CM-6(d), CM-7, SC-5, DE.CM-1, PR.DS-4, PR.IP-1, PR.PT-3, SRG-OS-000480-GPOS-00227

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_conf_all_accept_redirects_value="0"

#
# Set runtime for net.ipv4.conf.all.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.accept_redirects=$sysctl_net_ipv4_conf_all_accept_redirects_value

#
# If net.ipv4.conf.all.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.accept_redirects = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.all.accept_redirects' "$sysctl_net_ipv4_conf_all_accept_redirects_value" 'CCE-80158-9'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_conf_all_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_accept_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.accept_redirects is set
  sysctl:
    name: net.ipv4.conf.all.accept_redirects
    value: '{{ sysctl_net_ipv4_conf_all_accept_redirects_value }}'
    state: present
    reload: true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sysctl_net_ipv4_conf_all_accept_redirects
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-80158-9
    - DISA-STIG-RHEL-07-040641
    - NIST-800-171-3.1.20
    - NIST-800-53-CM-6(d)
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - CJIS-5.10.1.1

Rule   Enable Kernel Parameter to Log Martian Packets on all IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.all.log_martians kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.log_martians=1
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.log_martians = 1

Rationale:

The presence of "martian" packets (which have impossible addresses) as well as spoofed packets, source-routed packets, and redirects could be a sign of nefarious network activity. Logging these packets enables this activity to be detected.

Severity: 
unknown
Identifiers and References

Identifiers:  CCE-80160-5

References:  NT28(R22), 3.2.4, 1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.04, DSS03.05, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.06, 3.1.20, CCI-000126, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.11.2.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.2.1, A.6.2.2, A.9.1.2, AC-17(7), CM-7, SC-5(3), DE.CM-1, PR.AC-3, PR.DS-4, PR.IP-1, PR.PT-3, PR.PT-4

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_conf_all_log_martians_value="1"

#
# Set runtime for net.ipv4.conf.all.log_martians
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.log_martians=$sysctl_net_ipv4_conf_all_log_martians_value

#
# If net.ipv4.conf.all.log_martians present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.log_martians = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.all.log_martians' "$sysctl_net_ipv4_conf_all_log_martians_value" 'CCE-80160-5'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_conf_all_log_martians_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_log_martians_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.log_martians is set
  sysctl:
    name: net.ipv4.conf.all.log_martians
    value: '{{ sysctl_net_ipv4_conf_all_log_martians_value }}'
    state: present
    reload: true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sysctl_net_ipv4_conf_all_log_martians
    - unknown_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-80160-5
    - NIST-800-171-3.1.20
    - NIST-800-53-AC-17(7)
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5(3)

Rule   Enable Kernel Parameter to Use Reverse Path Filtering on all IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.all.rp_filter kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.rp_filter=1
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.rp_filter = 1

Rationale:

Enabling reverse path filtering drops packets with source addresses that should not have been able to be received on the interface they were received on. It should not be used on systems which are routers for complicated networks, but is helpful for end hosts and routers serving small networks.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80167-0

References:  NT28(R22), 3.2.7, 1, 12, 13, 14, 15, 16, 18, 2, 4, 6, 7, 8, 9, APO01.06, APO13.01, BAI04.04, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.07, DSS06.02, 3.1.20, CCI-001551, 4.2.3.4, 4.3.3.4, 4.4.3.3, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-4, SC-5, SC-7, DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.PT-4

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_conf_all_rp_filter_value="1"

#
# Set runtime for net.ipv4.conf.all.rp_filter
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.rp_filter=$sysctl_net_ipv4_conf_all_rp_filter_value

#
# If net.ipv4.conf.all.rp_filter present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.rp_filter = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.all.rp_filter' "$sysctl_net_ipv4_conf_all_rp_filter_value" 'CCE-80167-0'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_conf_all_rp_filter_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_rp_filter_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.rp_filter is set
  sysctl:
    name: net.ipv4.conf.all.rp_filter
    value: '{{ sysctl_net_ipv4_conf_all_rp_filter_value }}'
    state: present
    reload: true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sysctl_net_ipv4_conf_all_rp_filter
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-80167-0
    - NIST-800-171-3.1.20
    - NIST-800-53-AC-4
    - NIST-800-53-SC-5
    - NIST-800-53-SC-7

Rule   Enable Kernel Parameter to Ignore ICMP Broadcast Echo Requests on IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.icmp_echo_ignore_broadcasts kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.icmp_echo_ignore_broadcasts=1
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.icmp_echo_ignore_broadcasts = 1

Rationale:

Responding to broadcast (ICMP) echoes facilitates network mapping and provides a vector for amplification attacks.
Ignoring ICMP echo requests (pings) sent to broadcast or multicast addresses makes the system slightly more difficult to enumerate on the network.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80165-4

References:  RHEL-07-040630, SV-86911r2_rule, 3.2.5, 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-4, CM-7, SC-5, DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value="1"

#
# Set runtime for net.ipv4.icmp_echo_ignore_broadcasts
#
/sbin/sysctl -q -n -w net.ipv4.icmp_echo_ignore_broadcasts=$sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value

#
# If net.ipv4.icmp_echo_ignore_broadcasts present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.icmp_echo_ignore_broadcasts = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.icmp_echo_ignore_broadcasts' "$sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value" 'CCE-80165-4'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value # promote to variable
  set_fact:
    sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.icmp_echo_ignore_broadcasts is set
  sysctl:
    name: net.ipv4.icmp_echo_ignore_broadcasts
    value: '{{ sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value }}'
    state: present
    reload: true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sysctl_net_ipv4_icmp_echo_ignore_broadcasts
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-80165-4
    - DISA-STIG-RHEL-07-040630
    - NIST-800-171-3.1.20
    - NIST-800-53-AC-4
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - CJIS-5.10.1.1

Rule   Configure Kernel Parameter for Accepting Secure Redirects By Default   [ref]

To set the runtime status of the net.ipv4.conf.default.secure_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.secure_redirects=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.secure_redirects = 0

Rationale:

Accepting "secure" ICMP redirects (from those gateways listed as default gateways) has few legitimate uses. It should be disabled unless it is absolutely required.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80164-7

References:  NT28(R22), 3.2.3, 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-001551, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-4, CM-7, SC-5, SC-7, DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_conf_default_secure_redirects_value="0"

#
# Set runtime for net.ipv4.conf.default.secure_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.secure_redirects=$sysctl_net_ipv4_conf_default_secure_redirects_value

#
# If net.ipv4.conf.default.secure_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.secure_redirects = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.default.secure_redirects' "$sysctl_net_ipv4_conf_default_secure_redirects_value" 'CCE-80164-7'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_conf_default_secure_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_secure_redirects_value: !!str 0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.secure_redirects is set
  sysctl:
    name: net.ipv4.conf.default.secure_redirects
    value: '{{ sysctl_net_ipv4_conf_default_secure_redirects_value }}'
    state: present
    reload: true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sysctl_net_ipv4_conf_default_secure_redirects
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-80164-7
    - NIST-800-171-3.1.20
    - NIST-800-53-AC-4
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - NIST-800-53-SC-7

Rule   Enable Kernel Paremeter to Log Martian Packets on all IPv4 Interfaces by Default   [ref]

To set the runtime status of the net.ipv4.conf.default.log_martians kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.log_martians=1
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.log_martians = 1

Rationale:

The presence of "martian" packets (which have impossible addresses) as well as spoofed packets, source-routed packets, and redirects could be a sign of nefarious network activity. Logging these packets enables this activity to be detected.

Severity: 
unknown
Identifiers and References

Identifiers:  CCE-80161-3

References:  3.2.4, 1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.04, DSS03.05, DSS05.02, DSS05.03, DSS05.05, DSS05.07, DSS06.06, 3.1.20, CCI-000126, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.11.2.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.2.1, A.6.2.2, A.9.1.2, AC-17(7), CM-7, SC-5(3), DE.CM-1, PR.AC-3, PR.DS-4, PR.IP-1, PR.PT-3, PR.PT-4

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_conf_default_log_martians_value="1"

#
# Set runtime for net.ipv4.conf.default.log_martians
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.log_martians=$sysctl_net_ipv4_conf_default_log_martians_value

#
# If net.ipv4.conf.default.log_martians present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.log_martians = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.default.log_martians' "$sysctl_net_ipv4_conf_default_log_martians_value" 'CCE-80161-3'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_conf_default_log_martians_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_log_martians_value: !!str 1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.log_martians is set
  sysctl:
    name: net.ipv4.conf.default.log_martians
    value: '{{ sysctl_net_ipv4_conf_default_log_martians_value }}'
    state: present
    reload: true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sysctl_net_ipv4_conf_default_log_martians
    - unknown_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-80161-3
    - NIST-800-171-3.1.20
    - NIST-800-53-AC-17(7)
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5(3)
Group   Network Parameters for Hosts Only   Group contains 3 rules

[ref]   If the system is not going to be used as a router, then setting certain kernel parameters ensure that the host will not perform routing of network traffic.

Rule   Disable Kernel Parameter for IP Forwarding on IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.ip_forward kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.ip_forward=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.ip_forward = 0

Rationale:

Routing protocol daemons are typically used on routers to exchange network topology information with other routers. If this capability is used when not required, system network information may be unnecessarily transmitted across the network.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80157-1

References:  RHEL-07-040740, SV-86933r2_rule, NT28(R22), 3.1.1, 1, 11, 12, 13, 14, 15, 16, 2, 3, 7, 8, 9, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS03.05, DSS05.02, DSS05.05, DSS05.07, DSS06.06, 3.1.20, CCI-000366, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.9.1.2, CM-7, SC-5, SC-32, DE.CM-1, PR.DS-4, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable


#
# Set runtime for net.ipv4.ip_forward
#
/sbin/sysctl -q -n -w net.ipv4.ip_forward=0

#
# If net.ipv4.ip_forward present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.ip_forward = 0" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.ip_forward' "0" 'CCE-80157-1'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure sysctl net.ipv4.ip_forward is set to 0
  sysctl:
    name: net.ipv4.ip_forward
    value: '0'
    state: present
    reload: true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sysctl_net_ipv4_ip_forward
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-80157-1
    - DISA-STIG-RHEL-07-040740
    - NIST-800-171-3.1.20
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - NIST-800-53-SC-32

Rule   Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces   [ref]

To set the runtime status of the net.ipv4.conf.all.send_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.send_redirects=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.send_redirects = 0

Rationale:

ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table possibly revealing portions of the network topology.
The ability to send ICMP redirects is only appropriate for systems acting as routers.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80156-3

References:  RHEL-07-040660, SV-86917r3_rule, NT28(R22), 3.1.2, 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-4, CM-7, SC-5(1), DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable


#
# Set runtime for net.ipv4.conf.all.send_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.send_redirects=0

#
# If net.ipv4.conf.all.send_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.all.send_redirects = 0" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.all.send_redirects' "0" 'CCE-80156-3'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure sysctl net.ipv4.conf.all.send_redirects is set to 0
  sysctl:
    name: net.ipv4.conf.all.send_redirects
    value: '0'
    state: present
    reload: true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sysctl_net_ipv4_conf_all_send_redirects
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-80156-3
    - DISA-STIG-RHEL-07-040660
    - NIST-800-171-3.1.20
    - NIST-800-53-AC-4
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5(1)
    - CJIS-5.10.1.1

Rule   Disable Kernel Parameter for Sending ICMP Redirects on all IPv4 Interfaces by Default   [ref]

To set the runtime status of the net.ipv4.conf.default.send_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.send_redirects=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.send_redirects = 0

Rationale:

ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table possibly revealing portions of the network topology.
The ability to send ICMP redirects is only appropriate for systems acting as routers.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80999-6

References:  RHEL-07-040650, SV-86915r4_rule, NT28(R22), 3.1.2, 1, 11, 12, 13, 14, 15, 16, 18, 2, 3, 4, 6, 7, 8, 9, 5.10.1.1, APO01.06, APO13.01, BAI04.04, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.03, DSS01.05, DSS03.01, DSS03.05, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.02, DSS06.06, 3.1.20, CCI-000366, 4.2.3.4, 4.3.3.4, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, 4.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 6.2, SR 7.1, SR 7.2, SR 7.6, A.10.1.1, A.11.1.4, A.11.1.5, A.11.2.1, A.12.1.1, A.12.1.2, A.12.1.3, A.12.5.1, A.12.6.2, A.13.1.1, A.13.1.2, A.13.1.3, A.13.2.1, A.13.2.2, A.13.2.3, A.13.2.4, A.14.1.2, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.17.2.1, A.6.1.2, A.7.1.1, A.7.1.2, A.7.3.1, A.8.2.2, A.8.2.3, A.9.1.1, A.9.1.2, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-4, CM-7, SC-5, SC-7, DE.AE-1, DE.CM-1, ID.AM-3, PR.AC-5, PR.DS-4, PR.DS-5, PR.IP-1, PR.PT-3, PR.PT-4, SRG-OS-000480-GPOS-00227

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable


#
# Set runtime for net.ipv4.conf.default.send_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.send_redirects=0

#
# If net.ipv4.conf.default.send_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.default.send_redirects = 0" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.default.send_redirects' "0" 'CCE-80999-6'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure sysctl net.ipv4.conf.default.send_redirects is set to 0
  sysctl:
    name: net.ipv4.conf.default.send_redirects
    value: '0'
    state: present
    reload: true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - sysctl_net_ipv4_conf_default_send_redirects
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-80999-6
    - DISA-STIG-RHEL-07-040650
    - NIST-800-171-3.1.20
    - NIST-800-53-AC-4
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - NIST-800-53-SC-7
    - CJIS-5.10.1.1
Group   Uncommon Network Protocols   Group contains 2 rules

[ref]   The system includes support for several network protocols which are not commonly used. Although security vulnerabilities in kernel networking code are not frequently discovered, the consequences can be dramatic. Ensuring uncommon network protocols are disabled reduces the system's risk to attacks targeted at its implementation of those protocols.

Warning:  Although these protocols are not commonly used, avoid disruption in your network environment by ensuring they are not needed prior to disabling them.

Rule   Disable DCCP Support   [ref]

The Datagram Congestion Control Protocol (DCCP) is a relatively new transport layer protocol, designed to support streaming media and telephony. To configure the system to prevent the dccp kernel module from being loaded, add the following line to a file in the directory /etc/modprobe.d:

install dccp /bin/true

Rationale:

Disabling DCCP protects the system against exploitation of any flaws in its implementation.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-82024-1

References:  3.5.1, 11, 14, 3, 9, 5.10.1, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.4.6, CCI-001958, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7, PR.IP-1, PR.PT-3, RHEL-07-020101, SV-92517r2_rule

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
if LC_ALL=C grep -q -m 1 "^install dccp" /etc/modprobe.d/dccp.conf ; then
	sed -i 's/^install dccp.*/install dccp /bin/true/g' /etc/modprobe.d/dccp.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/dccp.conf
	echo "install dccp /bin/true" >> /etc/modprobe.d/dccp.conf
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'dccp' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/dccp.conf
    regexp: dccp
    line: install dccp /bin/true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - kernel_module_dccp_disabled
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-82024-1
    - NIST-800-171-3.4.6
    - NIST-800-53-CM-7
    - CJIS-5.10.1

Rule   Disable SCTP Support   [ref]

The Stream Control Transmission Protocol (SCTP) is a transport layer protocol, designed to support the idea of message-oriented communication, with several streams of messages within one connection. To configure the system to prevent the sctp kernel module from being loaded, add the following line to a file in the directory /etc/modprobe.d:

install sctp /bin/true

Rationale:

Disabling SCTP protects the system against exploitation of any flaws in its implementation.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-82044-9

References:  3.5.2, 11, 14, 3, 9, 5.10.1, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS05.02, DSS05.05, DSS06.06, 3.4.6, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 7.6, A.12.1.2, A.12.5.1, A.12.6.2, A.14.2.2, A.14.2.3, A.14.2.4, A.9.1.2, CM-7, PR.IP-1, PR.PT-3

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
if LC_ALL=C grep -q -m 1 "^install sctp" /etc/modprobe.d/sctp.conf ; then
	sed -i 's/^install sctp.*/install sctp /bin/true/g' /etc/modprobe.d/sctp.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/sctp.conf
	echo "install sctp /bin/true" >> /etc/modprobe.d/sctp.conf
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'sctp' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/sctp.conf
    regexp: sctp
    line: install sctp /bin/true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - kernel_module_sctp_disabled
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-82044-9
    - NIST-800-171-3.4.6
    - NIST-800-53-CM-7
    - CJIS-5.10.1
Group   Wireless Networking   Group contains 1 group and 1 rule

[ref]   Wireless networking, such as 802.11 (WiFi) and Bluetooth, can present a security risk to sensitive or classified systems and networks. Wireless networking hardware is much more likely to be included in laptop or portable systems than in desktops or servers.

Removal of hardware provides the greatest assurance that the wireless capability remains disabled. Acquisition policies often include provisions to prevent the purchase of equipment that will be used in sensitive spaces and includes wireless capabilities. If it is impractical to remove the wireless hardware, and policy permits the device to enter sensitive spaces as long as wireless is disabled, efforts should instead focus on disabling wireless capability via software.

Group   Disable Wireless Through Software Configuration   Group contains 1 rule

[ref]   If it is impossible to remove the wireless hardware from the device in question, disable as much of it as possible through software. The following methods can disable software support for wireless networking, but note that these methods do not prevent malicious software or careless users from re-activating the devices.

Rule   Disable Bluetooth Kernel Module   [ref]

The kernel's module loading system can be configured to prevent loading of the Bluetooth module. Add the following to the appropriate /etc/modprobe.d configuration file to prevent the loading of the Bluetooth module:

install bluetooth /bin/true

Rationale:

If Bluetooth functionality must be disabled, preventing the kernel from loading the kernel module provides an additional safeguard against its activation.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-27327-6

References:  11, 12, 14, 15, 3, 8, 9, 5.13.1.3, APO13.01, BAI10.01, BAI10.02, BAI10.03, BAI10.05, DSS01.04, DSS05.02, DSS05.03, DSS05.05, DSS06.06, 3.1.16, CCI-000085, CCI-001551, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, 4.3.4.3.2, 4.3.4.3.3, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, SR 3.1, SR 3.5, SR 3.8, SR 4.1, SR 4.3, SR 5.1, SR 5.2, SR 5.3, SR 7.1, SR 7.6, A.11.2.6, A.12.1.2, A.12.5.1, A.12.6.2, A.13.1.1, A.13.2.1, A.14.1.3, A.14.2.2, A.14.2.3, A.14.2.4, A.6.2.1, A.6.2.2, A.9.1.2, AC-17(8), AC-18(a), AC-18(d), AC-18(3), CM-7, MP-7, PR.AC-3, PR.IP-1, PR.PT-3, PR.PT-4

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
if LC_ALL=C grep -q -m 1 "^install bluetooth" /etc/modprobe.d/bluetooth.conf ; then
	sed -i 's/^install bluetooth.*/install bluetooth /bin/true/g' /etc/modprobe.d/bluetooth.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/bluetooth.conf
	echo "install bluetooth /bin/true" >> /etc/modprobe.d/bluetooth.conf
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'bluetooth' is disabled
  lineinfile:
    create: true
    dest: /etc/modprobe.d/bluetooth.conf
    regexp: bluetooth
    line: install bluetooth /bin/true
  when: ansible_virtualization_role != "guest" or ansible_virtualization_type != "docker"
  tags:
    - kernel_module_bluetooth_disabled
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - reboot_required
    - CCE-27327-6
    - NIST-800-171-3.1.16
    - NIST-800-53-AC-17(8)
    - NIST-800-53-AC-18(a)
    - NIST-800-53-AC-18(d)
    - NIST-800-53-AC-18(3)
    - NIST-800-53-CM-7
    - NIST-800-53-MP-7
    - CJIS-5.13.1.3
Group   Set Boot Loader Password   Group contains 1 rule

[ref]   During the boot process, the boot loader is responsible for starting the execution of the kernel and passing options to it. The boot loader allows for the selection of different kernels - possibly on different partitions or media. The default Red Hat Enterprise Linux 7 boot loader for x86 systems is called GRUB2. Options it can pass to the kernel include single-user mode, which provides root access without any authentication, and the ability to disable SELinux. To prevent local users from modifying the boot parameters and endangering security, protect the boot loader configuration with a password and ensure its configuration file's permissions are set properly.

Rule   Set the UEFI Boot Loader Password   [ref]

The grub2 boot loader should have a superuser account and password protection enabled to protect boot-time settings.

To do so, select a superuser account name and password and and modify the /etc/grub.d/01_users configuration file with the new account name.

Since plaintext passwords are a security risk, generate a hash for the pasword by running the following command:

$ grub2-setpassword
When prompted, enter the password that was selected.

NOTE: It is recommended not to use common administrator account names like root, admin, or administrator for the grub2 superuser account.

Change the superuser to a different username (The default is 'root').
$ sed -i s/root/bootuser/g /etc/grub.d/01_users


To meet FISMA Moderate, the bootloader superuser account and password MUST differ from the root account and password. Once the superuser account and password have been added, update the grub.cfg file by running:
grub2-mkconfig -o /boot/efi/EFI/redhat/grub.cfg
NOTE: Do NOT manually add the superuser account and password to the grub.cfg file as the grub2-mkconfig command overwrites this file.

Warning:  To prevent hard-coded passwords, automatic remediation of this control is not available. Remediation must be automated as a component of machine provisioning, or followed manually as outlined above.
Rationale:

Password protection on the boot loader configuration ensures users with physical access cannot trivially alter important bootloader settings. These include which kernel to use, and whether to enter single-user mode. For more information on how to configure the grub2 superuser account and password, please refer to

Severity: 
medium
Identifiers and References

Identifiers:  CCE-80354-4

References:  RHEL-07-010490, SV-86587r4_rule, NT28(R17), 1.4.2, 11, 12, 14, 15, 16, 18, 3, 5, DSS05.02, DSS05.04, DSS05.05, DSS05.07, DSS06.03, DSS06.06, 3.4.5, CCI-000213, 164.308(a)(1)(ii)(B), 164.308(a)(7)(i), 164.308(a)(7)(ii)(A), 164.310(a)(1), 164.310(a)(2)(i), 164.310(a)(2)(ii), 164.310(a)(2)(iii), 164.310(b), 164.310(c), 164.310(d)(1), 164.310(d)(2)(iii), 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.5.3, 4.3.3.5.4, 4.3.3.5.5, 4.3.3.5.6, 4.3.3.5.7, 4.3.3.5.8, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.1, 4.3.3.7.2, 4.3.3.7.3, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.11, SR 1.12, SR 1.13, SR 1.2, SR 1.3, SR 1.4, SR 1.5, SR 1.6, SR 1.7, SR 1.8, SR 1.9, SR 2.1, SR 2.2, SR 2.3, SR 2.4, SR 2.5, SR 2.6, SR 2.7, A.6.1.2, A.7.1.1, A.9.1.2, A.9.2.1, A.9.2.3, A.9.4.1, A.9.4.4, A.9.4.5, AC-3, PR.AC-4, PR.AC-6, PR.PT-3, FIA_AFL.1, SRG-OS-000080-GPOS-00048

Group   Account and Access Control   Group contains 15 groups and 27 rules

[ref]   In traditional Unix security, if an attacker gains shell access to a certain login account, they can perform any action or access any file to which that account has access. Therefore, making it more difficult for unauthorized people to gain shell access to accounts, particularly to privileged accounts, is a necessary part of securing a system. This section introduces mechanisms for restricting access to accounts under Red Hat Enterprise Linux 7.

Group   Protect Accounts by Configuring PAM   Group contains 3 groups and 12 rules

[ref]   PAM, or Pluggable Authentication Modules, is a system which implements modular authentication for Linux programs. PAM provides a flexible and configurable architecture for authentication, and it should be configured to minimize exposure to unnecessary risk. This section contains guidance on how to accomplish that.

PAM is implemented as a set of shared objects which are loaded and invoked whenever an application wishes to authenticate a user. Typically, the application must be running as root in order to take advantage of PAM, because PAM's modules often need to be able to access sensitive stores of account information, such as /etc/shadow. Traditional privileged network listeners (e.g. sshd) or SUID programs (e.g. sudo) already meet this requirement. An SUID root application, userhelper, is provided so that programs which are not SUID or privileged themselves can still take advantage of PAM.

PAM looks in the directory /etc/pam.d for application-specific configuration information. For instance, if the program login attempts to authenticate a user, then PAM's libraries follow the instructions in the file /etc/pam.d/login to determine what actions should be taken.

One very important file in /etc/pam.d is /etc/pam.d/system-auth. This file, which is included by many other PAM configuration files, defines 'default' system authentication measures. Modifying this file is a good way to make far-reaching authentication changes, for instance when implementing a centralized authentication service.

Warning:  Be careful when making changes to PAM's configuration files. The syntax for these files is complex, and modifications can have unexpected consequences. The default configurations shipped with applications should be sufficient for most users.
Warning:  Running authconfig or system-config-authentication will re-write the PAM configuration files, destroying any manually made changes and replacing them with a series of system defaults. One reference to the configuration file syntax can be found at http://www.linux-pam.org/Linux-PAM-html/sag-configuration-file.html.
Group   Set Lockouts for Failed Password Attempts   Group contains 4 rules

[ref]   The pam_faillock PAM module provides the capability to lock out user accounts after a number of failed login attempts. Its documentation is available in /usr/share/doc/pam-VERSION/txts/README.pam_faillock.

Warning:  Locking out user accounts presents the risk of a denial-of-service attack. The lockout policy must weigh whether the risk of such a denial-of-service attack outweighs the benefits of thwarting password guessing attacks.

Rule   Set Lockout Time for Failed Password Attempts   [ref]

To configure the system to lock out accounts after a number of incorrect login attempts and require an administrator to unlock the account using pam_faillock.so, modify the content of both /etc/pam.d/system-auth and /etc/pam.d/password-auth as follows:

  • add the following line immediately before the pam_unix.so statement in the AUTH section:
    auth required pam_faillock.so preauth silent deny=3 unlock_time=never fail_interval=900
  • add the following line immediately after the pam_unix.so statement in the AUTH section:
    auth [default=die] pam_faillock.so authfail deny=3 unlock_time=never fail_interval=900
  • add the following line immediately before the pam_unix.so statement in the ACCOUNT section:
    account required pam_faillock.so

Rationale:

Locking out user accounts after a number of incorrect attempts prevents direct password guessing attacks. Ensuring that an administrator is involved in unlocking locked accounts draws appropriate attention to such situations.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-26884-7

References:  RHEL-07-010320, SV-86567r4_rule, 5.3.2, 1, 12, 15, 16, 5.5.3, DSS05.04, DSS05.10, DSS06.10, 3.1.8, CCI-002238, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, SR 1.1, SR 1.10, SR 1.2, SR 1.5, SR 1.7, SR 1.8, SR 1.9, A.18.1.4, A.9.2.1, A.9.2.4, A.9.3.1, A.9.4.2, A.9.4.3, AC-7(b), PR.AC-7, FMT_MOF_EXT.1, Req-8.1.7, SRG-OS-000329-GPOS-00128, SRG-OS-000021-GPOS-00005, SRG-OS-000329-VMM-001180

Remediation Shell script:   (show)


var_accounts_passwords_pam_faillock_unlock_time="never"
function include_set_faillock_option {
	:
}

function insert_preauth {
	local pam_file="$1"
	local option="$2"
	local value="$3"
	# is auth required pam_faillock.so preauth present?
	if grep -qE "^\s*auth\s+required\s+pam_faillock\.so\s+preauth.*$" "$pam_file" ; then
		# is the option set?
		if grep -qE "^\s*auth\s+required\s+pam_faillock\.so\s+preauth.*$option=([0-9]*).*$" "$pam_file" ; then
			# just change the value of option to a correct value
			sed -i --follow-symlinks "s/\(^auth.*required.*pam_faillock.so.*preauth.*silent.*\)\($option *= *\).*/\1\2$value/" "$pam_file"
		# the option is not set.
		else
			# append the option
			sed -i --follow-symlinks "/^auth.*required.*pam_faillock.so.*preauth.*silent.*/ s/$/ $option=$value/" "$pam_file"
		fi
	# auth required pam_faillock.so preauth is not present, insert the whole line
	else
		sed -i --follow-symlinks "/^auth.*sufficient.*pam_unix.so.*/i auth        required      pam_faillock.so preauth silent $option=$value" "$pam_file"
	fi
}

function insert_authfail {
	local pam_file="$1"
	local option="$2"
	local value="$3"
	# is auth default pam_faillock.so authfail present?
	if grep -qE "^\s*auth\s+(\[default=die\])\s+pam_faillock\.so\s+authfail.*$" "$pam_file" ; then
		# is the option set?
		if grep -qE "^\s*auth\s+(\[default=die\])\s+pam_faillock\.so\s+authfail.*$option=([0-9]*).*$" "$pam_file" ; then
			# just change the value of option to a correct value
			sed -i --follow-symlinks "s/\(^auth.*[default=die].*pam_faillock.so.*authfail.*\)\($option *= *\).*/\1\2$value/" "$pam_file"
		# the option is not set.
		else
			# append the option
			sed -i --follow-symlinks "/^auth.*[default=die].*pam_faillock.so.*authfail.*/ s/$/ $option=$value/" "$pam_file"
		fi
	# auth default pam_faillock.so authfail is not present, insert the whole line
	else
		sed -i --follow-symlinks "/^auth.*sufficient.*pam_unix.so.*/a auth        [default=die] pam_faillock.so authfail $option=$value" "$pam_file"
	fi
}

function insert_account {
	local pam_file="$1"
	if ! grep -qE "^\s*account\s+required\s+pam_faillock\.so.*$" "$pam_file" ; then
		sed -E -i --follow-symlinks "/^\s*account\s*required\s*pam_unix.so/i account     required      pam_faillock.so" "$pam_file"
	fi
}

function set_faillock_option {
	local pam_file="$1"
	local option="$2"
	local value="$3"
	insert_preauth "$pam_file" "$option" "$value"
	insert_authfail "$pam_file" "$option" "$value"
	insert_account "$pam_file"
}

include_set_faillock_option

AUTH_FILES[0]="/etc/pam.d/system-auth"
AUTH_FILES[1]="/etc/pam.d/password-auth"

for pam_file in "${AUTH_FILES[@]}"
do
	set_faillock_option "$pam_file" "unlock_time" "$var_accounts_passwords_pam_faillock_unlock_time"
done
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value var_accounts_passwords_pam_faillock_unlock_time # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_unlock_time: !!str never
  tags:
    - always

- name: Add auth pam_faillock preauth unlock_time before pam_unix.so
  pamd:
    name: '{{ item }}'
    type: auth
    control: sufficient
    module_path: pam_unix.so
    new_type: auth
    new_control: required
    new_module_path: pam_faillock.so
    module_arguments: preauth silent unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
      }}
    state: before
  loop:
    - system-auth
    - password-auth
  tags:
    - accounts_passwords_pam_faillock_unlock_time
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-26884-7
    - PCI-DSS-Req-8.1.7
    - DISA-STIG-RHEL-07-010320
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - CJIS-5.5.3

- name: Add unlock_time argument to pam_faillock preauth
  pamd:
    name: '{{ item }}'
    type: auth
    control: required
    module_path: pam_faillock.so
    module_arguments: preauth silent unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
      }}
    state: args_present
  loop:
    - system-auth
    - password-auth
  tags:
    - accounts_passwords_pam_faillock_unlock_time
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-26884-7
    - PCI-DSS-Req-8.1.7
    - DISA-STIG-RHEL-07-010320
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - CJIS-5.5.3

- name: Add auth pam_faillock authfail unlock_interval after pam_unix.so
  pamd:
    name: '{{ item }}'
    type: auth
    control: sufficient
    module_path: pam_unix.so
    new_type: auth
    new_control: '[default=die]'
    new_module_path: pam_faillock.so
    module_arguments: authfail unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
      }}
    state: after
  loop:
    - system-auth
    - password-auth
  tags:
    - accounts_passwords_pam_faillock_unlock_time
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-26884-7
    - PCI-DSS-Req-8.1.7
    - DISA-STIG-RHEL-07-010320
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - CJIS-5.5.3

- name: Add unlock_time argument to auth pam_faillock authfail
  pamd:
    name: '{{ item }}'
    type: auth
    control: '[default=die]'
    module_path: pam_faillock.so
    module_arguments: authfail unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time
      }}
    state: args_present
  loop:
    - system-auth
    - password-auth
  tags:
    - accounts_passwords_pam_faillock_unlock_time
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-26884-7
    - PCI-DSS-Req-8.1.7
    - DISA-STIG-RHEL-07-010320
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - CJIS-5.5.3

- name: Add account pam_faillock before pam_unix.so
  pamd:
    name: '{{ item }}'
    type: account
    control: required
    module_path: pam_unix.so
    new_type: account
    new_control: required
    new_module_path: pam_faillock.so
    state: before
  loop:
    - system-auth
    - password-auth
  tags:
    - accounts_passwords_pam_faillock_unlock_time
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - no_reboot_needed
    - CCE-26884-7
    - PCI-DSS-Req-8.1.7
    - DISA-STIG-RHEL-07-010320
    - NIST-800-171-3.1.8
    - NIST-800-53-AC-7(b)
    - CJIS-5.5.3

Rule   Limit Password Reuse   [ref]

Do not allow users to reuse recent passwords. This can be accomplished by using the remember option for the pam_unix or pam_pwhistory PAM modules.

In the file /etc/pam.d/system-auth, append remember=5 to the line which refers to the pam_unix.so or pam_pwhistory.somodule, as shown below:

  • for the pam_unix.so case:
    password sufficient pam_unix.so ...existing_options... remember=5
  • for the pam_pwhistory.so case:
    password requisite pam_pwhistory.so ...existing_options... remember=5
The DoD STIG requirement is 5 passwords.

Rationale:

Preventing re-use of previous passwords helps ensure that a compromised password is not re-used by a user.

Severity: 
medium
Identifiers and References

Identifiers:  CCE-82030-8

References:  RHEL-07-010270, SV-86557r3_rule, 5.3.3, 1, 12, 15, 16, 5, 5.6.2.1.1, DSS05.04, DSS05.05, DSS05.07, DSS05.10, DSS06.03, DSS06.10, 3.5.8, CCI-000200, 4.3.3.2.2, 4.3.3.5.1, 4.3.3.5.2, 4.3.3.6.1, 4.3.3.6.2, 4.3.3.6.3, 4.3.3.6.4, 4.3.3.6.5, 4.3.3.6.6, 4.3.3.6.7, 4.3.3.6.8, 4.3.3.6.9, 4.3.3.7.2, 4.3.3.7.4, SR 1.1, SR 1.10, SR 1.2, SR 1.3, SR 1.4, SR 1.5,