- name: Gather the package facts
  package_facts:
    manager: auto
  tags:
  - CJIS-5.4.1.1
  - DISA-STIG-OL08-00-030200
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fremovexattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Set architecture for audit fremovexattr tasks
  set_fact:
    audit_arch: b64
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - ansible_architecture == "aarch64" or ansible_architecture == "ppc64" or ansible_architecture
    == "ppc64le" or ansible_architecture == "s390x" or ansible_architecture == "x86_64"
  tags:
  - CJIS-5.4.1.1
  - DISA-STIG-OL08-00-030200
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fremovexattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for fremovexattr for 32bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fremovexattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fremovexattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fremovexattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fremovexattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b32(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b32)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b32 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  tags:
  - CJIS-5.4.1.1
  - DISA-STIG-OL08-00-030200
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fremovexattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

- name: Perform remediation of Audit rules for fremovexattr for 64bit platform
  block:

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fremovexattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k
        |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fremovexattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid>=1000 -F auid!=unset (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid>=1000 -F auid!=unset (?:-k |-F
        key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid>=1000
        -F auid!=unset -F key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fremovexattr in /etc/audit/rules.d/
    find:
      paths: /etc/audit/rules.d
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: '*.rules'
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Reset syscalls found per file
    set_fact:
      syscalls_per_file: {}
      found_paths_dict: {}

  - name: Declare syscalls found per file
    set_fact: syscalls_per_file="{{ syscalls_per_file | combine( {item.files[0].path
      :[item.item] + syscalls_per_file.get(item.files[0].path, []) } ) }}"
    loop: '{{ find_command.results | selectattr(''matched'') | list }}'

  - name: Declare files where syscalls were found
    set_fact: found_paths="{{ find_command.results | map(attribute='files') | flatten
      | map(attribute='path') | list }}"

  - name: Count occurrences of syscalls in paths
    set_fact: found_paths_dict="{{ found_paths_dict | combine({ item:1+found_paths_dict.get(item,
      0) }) }}"
    loop: '{{ find_command.results | map(attribute=''files'') | flatten | map(attribute=''path'')
      | list }}'

  - name: Get path with most syscalls
    set_fact: audit_file="{{ (found_paths_dict | dict2items() | sort(attribute='value')
      | last).key }}"
    when: found_paths | length >= 1

  - name: No file with syscall found, set path to /etc/audit/rules.d/perm_mod.rules
    set_fact: audit_file="/etc/audit/rules.d/perm_mod.rules"
    when: found_paths | length == 0

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_per_file[audit_file]
        | join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0

  - name: Declare list of syscalls
    set_fact:
      syscalls:
      - fremovexattr
      syscall_grouping:
      - fremovexattr
      - lremovexattr
      - removexattr
      - fsetxattr
      - lsetxattr
      - setxattr

  - name: Check existence of fremovexattr in /etc/audit/audit.rules
    find:
      paths: /etc/audit
      contains: -a always,exit -F arch=b64(( -S |,)\w+)*(( -S |,){{ item }})+(( -S
        |,)\w+)* -F auid=0 (-k\s+|-F\s+key=)\S+\s*$
      patterns: audit.rules
    register: find_command
    loop: '{{ (syscall_grouping + syscalls) | unique }}'

  - name: Set path to /etc/audit/audit.rules
    set_fact: audit_file="/etc/audit/audit.rules"

  - name: Declare found syscalls
    set_fact: syscalls_found="{{ find_command.results | selectattr('matched') | map(attribute='item')
      | list }}"

  - name: Declare missing syscalls
    set_fact: missing_syscalls="{{ syscalls | difference(syscalls_found) }}"

  - name: Replace the audit rule in {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      regexp: (-a always,exit -F arch=b64)(?=.*(?:(?:-S |,)(?:{{ syscalls_found |
        join("|") }}))\b)((?:( -S |,)\w+)+)( -F auid=0 (?:-k |-F key=)\w+)
      line: \1\2\3{{ missing_syscalls | join("\3") }}\4
      backrefs: true
      state: present
    when: syscalls_found | length > 0 and missing_syscalls | length > 0

  - name: Add the audit rule to {{ audit_file }}
    lineinfile:
      path: '{{ audit_file }}'
      line: -a always,exit -F arch=b64 -S {{ syscalls | join(',') }} -F auid=0 -F
        key=perm_mod
      create: true
      mode: o-rwx
      state: present
    when: syscalls_found | length == 0
  when:
  - '"audit" in ansible_facts.packages'
  - ansible_virtualization_type not in ["docker", "lxc", "openvz", "podman", "container"]
  - audit_arch == "b64"
  tags:
  - CJIS-5.4.1.1
  - DISA-STIG-OL08-00-030200
  - NIST-800-171-3.1.7
  - NIST-800-53-AU-12(c)
  - NIST-800-53-AU-2(d)
  - NIST-800-53-CM-6(a)
  - PCI-DSS-Req-10.5.5
  - PCI-DSSv4-10.3.4
  - audit_rules_dac_modification_fremovexattr
  - low_complexity
  - low_disruption
  - medium_severity
  - reboot_required
  - restrict_strategy

# Remediation is applicable only in certain platforms
if [ ! -f /.dockerenv ] && [ ! -f /run/.containerenv ] && rpm --quiet -q audit; then

# First perform the remediation of the syscall rule
# Retrieve hardware architecture of the underlying system
[ "$(getconf LONG_BIT)" = "32" ] && RULE_ARCHS=("b32") || RULE_ARCHS=("b32" "b64")

for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid>=1000 -F auid!=unset"
	SYSCALL="fremovexattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done



for ARCH in "${RULE_ARCHS[@]}"
do
	ACTION_ARCH_FILTERS="-a always,exit -F arch=$ARCH"
	OTHER_FILTERS=""
	AUID_FILTERS="-F auid=0"
	SYSCALL="fremovexattr"
	KEY="perm_mod"
	SYSCALL_GROUPING="fremovexattr lremovexattr removexattr fsetxattr lsetxattr setxattr"

	# Perform the remediation for both possible tools: 'auditctl' and 'augenrules'
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()


# If audit tool is 'augenrules', then check if the audit rule is defined
# If rule is defined, add '/etc/audit/rules.d/*.rules' to the list for inspection
# If rule isn't defined yet, add '/etc/audit/rules.d/$key.rules' to the list for inspection
default_file="/etc/audit/rules.d/$KEY.rules"
# As other_filters may include paths, lets use a different delimiter for it
# The "F" script expression tells sed to print the filenames where the expressions matched
readarray -t files_to_inspect < <(sed -s -n -e "/^$ACTION_ARCH_FILTERS/!d" -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" -e "F" /etc/audit/rules.d/*.rules)
# Case when particular rule isn't defined in /etc/audit/rules.d/*.rules yet
if [ ${#files_to_inspect[@]} -eq "0" ]
then
    file_to_inspect="/etc/audit/rules.d/$KEY.rules"
    files_to_inspect=("$file_to_inspect")
    if [ ! -e "$file_to_inspect" ]
    then
        touch "$file_to_inspect"
        chmod 0640 "$file_to_inspect"
    fi
fi

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
	unset syscall_a
unset syscall_grouping
unset syscall_string
unset syscall
unset file_to_edit
unset rule_to_edit
unset rule_syscalls_to_edit
unset other_string
unset auid_string
unset full_rule

# Load macro arguments into arrays
read -a syscall_a <<< $SYSCALL
read -a syscall_grouping <<< $SYSCALL_GROUPING

# Create a list of audit *.rules files that should be inspected for presence and correctness
# of a particular audit rule. The scheme is as follows:
#
# -----------------------------------------------------------------------------------------
#  Tool used to load audit rules | Rule already defined  |  Audit rules file to inspect    |
# -----------------------------------------------------------------------------------------
#        auditctl                |     Doesn't matter    |  /etc/audit/audit.rules         |
# -----------------------------------------------------------------------------------------
#        augenrules              |          Yes          |  /etc/audit/rules.d/*.rules     |
#        augenrules              |          No           |  /etc/audit/rules.d/$key.rules  |
# -----------------------------------------------------------------------------------------
#
files_to_inspect=()



# If audit tool is 'auditctl', then add '/etc/audit/audit.rules'
# file to the list of files to be inspected
default_file="/etc/audit/audit.rules"
files_to_inspect+=('/etc/audit/audit.rules' )

# After converting to jinja, we cannot return; therefore we skip the rest of the macro if needed instead
skip=1

for audit_file in "${files_to_inspect[@]}"
do
    # Filter existing $audit_file rules' definitions to select those that satisfy the rule pattern,
    # i.e, collect rules that match:
    # * the action, list and arch, (2-nd argument)
    # * the other filters, (3-rd argument)
    # * the auid filters, (4-rd argument)
    readarray -t similar_rules < <(sed -e "/^$ACTION_ARCH_FILTERS/!d"  -e "\#$OTHER_FILTERS#!d" -e "/$AUID_FILTERS/!d" "$audit_file")

    candidate_rules=()
    # Filter out rules that have more fields then required. This will remove rules more specific than the required scope
    for s_rule in "${similar_rules[@]}"
    do
        # Strip all the options and fields we know of,
        # than check if there was any field left over
        extra_fields=$(sed -E -e "s/^$ACTION_ARCH_FILTERS//"  -e "s#$OTHER_FILTERS##" -e "s/$AUID_FILTERS//" -e "s/((:?-S [[:alnum:],]+)+)//g" -e "s/-F key=\w+|-k \w+//"<<< "$s_rule")
        grep -q -- "-F" <<< "$extra_fields" || candidate_rules+=("$s_rule")
    done

    if [[ ${#syscall_a[@]} -ge 1 ]]
    then
        # Check if the syscall we want is present in any of the similar existing rules
        for rule in "${candidate_rules[@]}"
        do
            rule_syscalls=$(echo "$rule" | grep -o -P '(-S [\w,]+)+' | xargs)
            all_syscalls_found=0
            for syscall in "${syscall_a[@]}"
            do
                grep -q -- "\b${syscall}\b" <<< "$rule_syscalls" || {
                   # A syscall was not found in the candidate rule
                   all_syscalls_found=1
                   }
            done
            if [[ $all_syscalls_found -eq 0 ]]
            then
                # We found a rule with all the syscall(s) we want; skip rest of macro
                skip=0
                break
            fi

            # Check if this rule can be grouped with our target syscall and keep track of it
            for syscall_g in "${syscall_grouping[@]}"
            do
                if grep -q -- "\b${syscall_g}\b" <<< "$rule_syscalls"
                then
                    file_to_edit=${audit_file}
                    rule_to_edit=${rule}
                    rule_syscalls_to_edit=${rule_syscalls}
                fi
            done
        done
    else
        # If there is any candidate rule, it is compliant; skip rest of macro
        if [ "${#candidate_rules[@]}" -gt 0 ]
        then
            skip=0
        fi
    fi

    if [ "$skip" -eq 0 ]; then
        break
    fi
done

if [ "$skip" -ne 0 ]; then
    # We checked all rules that matched the expected resemblance pattern (action, arch & auid)
    # At this point we know if we need to either append the $full_rule or group
    # the syscall together with an exsiting rule

    # Append the full_rule if it cannot be grouped to any other rule
    if [ -z ${rule_to_edit+x} ]
    then
        # Build full_rule while avoid adding double spaces when other_filters is empty
        if [ "${#syscall_a[@]}" -gt 0 ]
        then
            syscall_string=""
            for syscall in "${syscall_a[@]}"
            do
                syscall_string+=" -S $syscall"
            done
        fi
        other_string=$([[ $OTHER_FILTERS ]] && echo " $OTHER_FILTERS") || /bin/true
        auid_string=$([[ $AUID_FILTERS ]] && echo " $AUID_FILTERS") || /bin/true
        full_rule="$ACTION_ARCH_FILTERS${syscall_string}${other_string}${auid_string} -F key=$KEY" || /bin/true
        echo "$full_rule" >> "$default_file"
        chmod o-rwx ${default_file}
    else
        # Check if the syscalls are declared as a comma separated list or
        # as multiple -S parameters
        if grep -q -- "," <<< "${rule_syscalls_to_edit}"
        then
            delimiter=","
        else
            delimiter=" -S "
        fi
        new_grouped_syscalls="${rule_syscalls_to_edit}"
        for syscall in "${syscall_a[@]}"
        do
            grep -q -- "\b${syscall}\b" <<< "${rule_syscalls_to_edit}" || {
               # A syscall was not found in the candidate rule
               new_grouped_syscalls+="${delimiter}${syscall}"
               }
        done

        # Group the syscall in the rule
        sed -i -e "\#${rule_to_edit}#s#${rule_syscalls_to_edit}#${new_grouped_syscalls}#" "$file_to_edit"
    fi
fi
done

else
    >&2 echo 'Remediation is not applicable, nothing was done'
fi