Guide to the Secure Configuration of Red Hat Enterprise Linux 6

with profile United States Government Configuration Baseline (USGCB)
This profile is a working draft for a USGCB submission against RHEL6 Server.
This guide presents a catalog of security-relevant configuration settings for Red Hat Enterprise Linux 6. It is a rendering of content structured in the eXtensible Configuration Checklist Description Format (XCCDF) in order to support security automation. The SCAP content is is available in the scap-security-guide package which is developed at https://www.open-scap.org/security-policies/scap-security-guide.

Providing system administrators with such guidance informs them how to securely configure systems under their control in a variety of network roles. Policy makers and baseline creators can use this catalog of settings, with its associated references to higher-level security control catalogs, in order to assist them in security baseline creation. This guide is a catalog, not a checklist, and satisfaction of every item is not likely to be possible or sensible in many operational scenarios. However, the XCCDF format enables granular selection and adjustment of settings, and their association with OVAL and OCIL content provides an automated checking capability. Transformations of this document, and its associated automated checking content, are capable of providing baselines that meet a diverse set of policy objectives. Some example XCCDF Profiles, which are selections of items that form checklists and can be used as baselines, are available with this guide. They can be processed, in an automated fashion, with tools that support the Security Content Automation Protocol (SCAP). The DISA STIG, which provides required settings for US Department of Defense systems, is one example of a baseline created from this guidance.

This benchmark is a direct port of a SCAP Security Guide benchmark developed for Red Hat Enterprise Linux. It has been modified through an automated process to remove specific dependencies on Red Hat Enterprise Linux and to function with CentOS. The result is a generally useful SCAP Security Guide benchmark with the following caveats:

  • CentOS is not an exact copy of Red Hat Enterprise Linux. There may be configuration differences that produce false positives and/or false negatives. If this occurs please file a bug report.
  • CentOS has its own build system, compiler options, patchsets, and is a community supported, non-commercial operating system. CentOS does not inherit certifications or evaluations from Red Hat Enterprise Linux. As such, some configuration rules (such as those requiring FIPS 140-2 encryption) will continue to fail on CentOS.

Members of the CentOS community are invited to participate in OpenSCAP and SCAP Security Guide development. Bug reports and patches can be sent to GitHub: https://github.com/OpenSCAP/scap-security-guide. The mailing list is at https://fedorahosted.org/mailman/listinfo/scap-security-guide.

Do not attempt to implement any of the settings in this guide without first testing them in a non-operational environment. The creators of this guidance assume no responsibility whatsoever for its use by other parties, and makes no guarantees, expressed or implied, about its quality, reliability, or any other characteristic.
Profile TitleUnited States Government Configuration Baseline (USGCB)
Profile IDxccdf_org.ssgproject.content_profile_usgcb-rhel6-server

Revision History

Current version: 0.1.41

  • draft (as of 2018-10-09)

Platforms

  • cpe:/o:redhat:enterprise_linux:6
  • cpe:/o:centos:centos:6
  • cpe:/o:redhat:enterprise_linux:6::client
  • cpe:/o:redhat:enterprise_linux:6::computenode

Table of Contents

  1. Services
    1. Obsolete Services
    2. FTP Server
    3. SNMP Server
    4. Cron and At Daemons
    5. DNS Server
    6. LDAP
    7. Mail Server Software
    8. Samba(SMB) Microsoft Windows File Sharing Server
    9. Web Server
    10. Network Time Protocol
    11. Base Services
    12. Proxy Server
    13. DHCP
    14. IMAP and POP3 Server
    15. NFS and RPC
    16. Avahi Server
    17. SSH Server
  2. System Settings
    1. Installing and Maintaining Software
    2. Configure Syslog
    3. Network Configuration and Firewalls
    4. SELinux
    5. Set Boot Loader Password
    6. Protect Random-Number Entropy Pool
    7. Account and Access Control
    8. System Accounting with auditd
    9. File Permissions and Masks

Checklist

contains 223 rules

Services   [ref]group

The best protection against vulnerable software is running less software. This section describes how to review the software which Red Hat Enterprise Linux 6 installs on a system and disable software which is not needed. It then enumerates the software packages installed on a default Red Hat Enterprise Linux 6 system and provides guidance about which ones can be safely disabled.

Red Hat Enterprise Linux 6 provides a convenient minimal install option that essentially installs the bare necessities for a functional system. When building Red Hat Enterprise Linux 6 systems, it is highly recommended to select the minimal packages and then build up the system from there.

contains 56 rules

Obsolete Services   [ref]group

This section discusses a number of network-visible services which have historically caused problems for system security, and for which disabling or severely limiting the service has been the best available guidance for some time. As a result of this, many of these services are not installed as part of Red Hat Enterprise Linux 6 by default.

Organizations which are running these services should switch to more secure equivalents as soon as possible. If it remains absolutely necessary to run one of these services for legacy reasons, care should be taken to restrict the service as much as possible, for instance by configuring host firewall software such as iptables to restrict access to the vulnerable service to only those remote hosts which have a known need to use it.

contains 9 rules

Rlogin, Rsh, and Rexec   [ref]group

The Berkeley r-commands are legacy services which allow cleartext remote access and have an insecure trust model.

contains 1 rule

Uninstall rsh-server Package   [ref]rule

The rsh-server package can be removed with the following command:

$ sudo yum erase rsh-server

Rationale:

The rsh-server service provides unencrypted remote access service which does not provide for the confidentiality and integrity of user passwords or the remote session and has very weak authentication. If a privileged user were to login using this service, the privileged user password could be compromised. The rsh-server package provides several obsolete and insecure network services. Removing it decreases the risk of those services' accidental (or intentional) activation.

Severity:  high

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:disable
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove rsh-server
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure rsh-server is removed
  package:
    name: rsh-server
    state: absent
  tags:
    - package_rsh-server_removed
    - high_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-CM-7
    - NIST-800-53-AC-17(8)
    - NIST-800-53-CM-7(a)
    - DISA-STIG-RHEL-06-000213
Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
include remove_rsh-server

class remove_rsh-server {
  package { 'rsh-server':
    ensure => 'purged',
  }
}
Remediation Anaconda snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable

package --remove=rsh-server

Telnet   [ref]group

The telnet protocol does not provide confidentiality or integrity for information transmitted on the network. This includes authentication information such as passwords. Organizations which use telnet should be actively working to migrate to a more secure protocol.

contains 2 rules

Disable telnet Service   [ref]rule

The telnet service configuration file /etc/xinetd.d/telnet is not created automatically. If it was created manually, check the /etc/xinetd.d/telnet file and ensure that disable = no is changed to read disable = yes as follows below:

# description: The telnet server serves telnet sessions; it uses \\
#       unencrypted username/password pairs for authentication.
service telnet
{
        flags           = REUSE
        socket_type     = stream

        wait            = no
        user            = root
        server          = /usr/sbin/in.telnetd
        log_on_failure  += USERID
        disable         = yes
}
If the /etc/xinetd.d/telnet file does not exist, make sure that the activation of the telnet service on system boot is disabled via the following command:

Rationale:

The telnet protocol uses unencrypted network communication, which means that data from the login session, including passwords and all other information transmitted during the session, can be stolen by eavesdroppers on the network. The telnet protocol is also subject to man-in-the-middle attacks.

Severity:  high

Uninstall telnet-server Package   [ref]rule

The telnet-server package can be removed with the following command:

$ sudo yum erase telnet-server

Rationale:

It is detrimental for operating systems to provide, or install by default, functionality exceeding requirements or mission objectives. These unnecessary capabilities are often overlooked and therefore may remain unsecure. They increase the risk to the platform by providing additional attack vectors.
The telnet service provides an unencrypted remote access service which does not provide for the confidentiality and integrity of user passwords or the remote session. If a privileged user were to login using this service, the privileged user password could be compromised.
Removing the telnet-server package decreases the risk of the telnet service's accidental (or intentional) activation.

Severity:  high

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:disable
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove telnet-server
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure telnet-server is removed
  package:
    name: telnet-server
    state: absent
  tags:
    - package_telnet-server_removed
    - high_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-CM-7
    - NIST-800-53-AC-17(8)
    - NIST-800-53-CM-7(a)
    - DISA-STIG-RHEL-06-000206
Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
include remove_telnet-server

class remove_telnet-server {
  package { 'telnet-server':
    ensure => 'purged',
  }
}
Remediation Anaconda snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable

package --remove=telnet-server

NIS   [ref]group

The Network Information Service (NIS), also known as 'Yellow Pages' (YP), and its successor NIS+ have been made obsolete by Kerberos, LDAP, and other modern centralized authentication services. NIS should not be used because it suffers from security problems inherent in its design, such as inadequate protection of important authentication information.

contains 2 rules

Disable ypbind Service   [ref]rule

The ypbind service, which allows the system to act as a client in a NIS or NIS+ domain, should be disabled. The ypbind service can be disabled with the following command:

$ sudo chkconfig ypbind off

Rationale:

Disabling the ypbind service ensures the system is not acting as a client in a NIS or NIS+ domain. This service should be disabled unless in use.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'ypbind' disable
/sbin/chkconfig --level 0123456 'ypbind' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service ypbind
  service:
    name: ypbind
    enabled: "no"
    state: "stopped"
  register: service_result
  failed_when: "service_result is failed and ('Could not find the requested service' not in service_result.msg)"
  tags:
    - service_ypbind_disabled
    - medium_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-17(8)
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000221

Uninstall ypserv Package   [ref]rule

The ypserv package can be removed with the following command:

$ sudo yum erase ypserv

Rationale:

The NIS service provides an unencrypted authentication service which does not provide for the confidentiality and integrity of user passwords or the remote session. Removing the ypserv package decreases the risk of the accidental (or intentional) activation of NIS or NIS+ services.

Severity:  high

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:disable
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove ypserv
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure ypserv is removed
  package:
    name: ypserv
    state: absent
  tags:
    - package_ypserv_removed
    - high_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-CM-7
    - NIST-800-53-AC-17(8)
    - NIST-800-53-CM-7(a)
    - DISA-STIG-RHEL-06-000220
Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
include remove_ypserv

class remove_ypserv {
  package { 'ypserv':
    ensure => 'purged',
  }
}
Remediation Anaconda snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable

package --remove=ypserv

TFTP Server   [ref]group

TFTP is a lightweight version of the FTP protocol which has traditionally been used to configure networking equipment. However, TFTP provides little security, and modern versions of networking operating systems frequently support configuration via SSH or other more secure protocols. A TFTP server should be run only if no more secure method of supporting existing equipment can be found.

contains 2 rules

Disable tftp Service   [ref]rule

The tftp service should be disabled. The tftp service can be disabled with the following command:

$ sudo chkconfig tftp off

Rationale:

Disabling the tftp service ensures the system is not acting as a TFTP server, which does not provide encryption or authentication.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'tftp' disable
/sbin/chkconfig --level 0123456 'tftp' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service tftp
  service:
    name: tftp
    enabled: "no"
    state: "stopped"
  register: service_result
  failed_when: "service_result is failed and ('Could not find the requested service' not in service_result.msg)"
  tags:
    - service_tftp_disabled
    - medium_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-17(8)
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000223

Uninstall tftp-server Package   [ref]rule

The tftp-server package can be removed with the following command:

 $ sudo yum erase tftp-server

Rationale:

Removing the tftp-server package decreases the risk of the accidental (or intentional) activation of tftp services.

If TFTP is required for operational support (such as transmission of router configurations), its use must be documented with the Information Systems Securty Manager (ISSM), restricted to only authorized personnel, and have access control rules established.

Severity:  high

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:disable
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove tftp-server
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure tftp-server is removed
  package:
    name: tftp-server
    state: absent
  tags:
    - package_tftp-server_removed
    - high_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-17(8)
    - NIST-800-53-CM-6(c)
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000222
Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
include remove_tftp-server

class remove_tftp-server {
  package { 'tftp-server':
    ensure => 'purged',
  }
}
Remediation Anaconda snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable

package --remove=tftp-server

Xinetd   [ref]group

The xinetd service acts as a dedicated listener for some network services (mostly, obsolete ones) and can be used to provide access controls and perform some logging. It has been largely obsoleted by other features, and it is not installed by default. The older Inetd service is not even available as part of Red Hat Enterprise Linux 6.

contains 2 rules

Disable xinetd Service   [ref]rule

The xinetd service can be disabled with the following command:

$ sudo chkconfig xinetd off

Rationale:

The xinetd service provides a dedicated listener service for some programs, which is no longer necessary for commonly-used network services. Disabling it ensures that these uncommon services are not running, and also prevents attacks against xinetd itself.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'xinetd' disable
/sbin/chkconfig --level 0123456 'xinetd' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service xinetd
  service:
    name: xinetd
    enabled: "no"
    state: "stopped"
  register: service_result
  failed_when: "service_result is failed and ('Could not find the requested service' not in service_result.msg)"
  tags:
    - service_xinetd_disabled
    - medium_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-17(8)
    - NIST-800-53-CM-7
    - NIST-800-171-3.4.7
    - DISA-STIG-RHEL-06-000203

Uninstall xinetd Package   [ref]rule

The xinetd package can be removed with the following command:

$ sudo yum erase xinetd

Rationale:

Removing the xinetd package decreases the risk of the xinetd service's accidental (or intentional) activation.

Severity:  unknown

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:disable
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove xinetd
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure xinetd is removed
  package:
    name: xinetd
    state: absent
  tags:
    - package_xinetd_removed
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-17(8)
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000204
Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
include remove_xinetd

class remove_xinetd {
  package { 'xinetd':
    ensure => 'purged',
  }
}
Remediation Anaconda snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable

package --remove=xinetd

FTP Server   [ref]group

FTP is a common method for allowing remote access to files. Like telnet, the FTP protocol is unencrypted, which means that passwords and other data transmitted during the session can be captured and that the session is vulnerable to hijacking. Therefore, running the FTP server software is not recommended.

However, there are some FTP server configurations which may be appropriate for some environments, particularly those which allow only read-only anonymous access as a means of downloading data available to the public.

contains 2 rules

Disable vsftpd if Possible   [ref]group

To minimize attack surface, disable vsftpd if at all possible.

contains 2 rules

Disable vsftpd Service   [ref]rule

The vsftpd service can be disabled with the following command:

$ sudo chkconfig vsftpd off

Rationale:

Running FTP server software provides a network-based avenue of attack, and should be disabled if not needed. Furthermore, the FTP protocol is unencrypted and creates a risk of compromising sensitive information.

Severity:  unknown

References:  2.2.9, CCI-001436, CM-7

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'vsftpd' disable
/sbin/chkconfig --level 0123456 'vsftpd' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service vsftpd
  service:
    name: vsftpd
    enabled: "no"
    state: "stopped"
  register: service_result
  failed_when: "service_result is failed and ('Could not find the requested service' not in service_result.msg)"
  tags:
    - service_vsftpd_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-CM-7

Uninstall vsftpd Package   [ref]rule

The vsftpd package can be removed with the following command:

 $ sudo yum erase vsftpd

Rationale:

Removing the vsftpd package decreases the risk of its accidental activation.

Severity:  high

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:disable
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove vsftpd
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure vsftpd is removed
  package:
    name: vsftpd
    state: absent
  tags:
    - package_vsftpd_removed
    - high_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-CM-6(b)
    - NIST-800-53-CM-7
Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
include remove_vsftpd

class remove_vsftpd {
  package { 'vsftpd':
    ensure => 'purged',
  }
}
Remediation Anaconda snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable

package --remove=vsftpd

SNMP Server   [ref]group

The Simple Network Management Protocol allows administrators to monitor the state of network devices, including computers. Older versions of SNMP were well-known for weak security, such as plaintext transmission of the community string (used for authentication) and usage of easily-guessable choices for the community string.

contains 2 rules

Disable SNMP Server if Possible   [ref]group

The system includes an SNMP daemon that allows for its remote monitoring, though it not installed by default. If it was installed and activated but is not needed, the software should be disabled and removed.

contains 2 rules

Uninstall net-snmp Package   [ref]rule

The net-snmp package provides the snmpd service. The net-snmp package can be removed with the following command:

$ sudo yum erase net-snmp

Rationale:

If there is no need to run SNMP server software, removing the package provides a safeguard against its activation.

Severity:  unknown

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:disable
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove net-snmp
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure net-snmp is removed
  package:
    name: net-snmp
    state: absent
  tags:
    - package_net-snmp_removed
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
include remove_net-snmp

class remove_net-snmp {
  package { 'net-snmp':
    ensure => 'purged',
  }
}
Remediation Anaconda snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable

package --remove=net-snmp

Disable snmpd Service   [ref]rule

The snmpd service can be disabled with the following command:

$ sudo chkconfig snmpd off

Rationale:

Running SNMP software provides a network-based avenue of attack, and should be disabled if not needed.

Severity:  unknown

References:  2.2.14

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'snmpd' disable
/sbin/chkconfig --level 0123456 'snmpd' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service snmpd
  service:
    name: snmpd
    enabled: "no"
    state: "stopped"
  register: service_result
  failed_when: "service_result is failed and ('Could not find the requested service' not in service_result.msg)"
  tags:
    - service_snmpd_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption

Cron and At Daemons   [ref]group

The cron and at services are used to allow commands to be executed at a later time. The cron service is required by almost all systems to perform necessary maintenance tasks, while at may or may not be required on a given system. Both daemons should be configured defensively.

contains 2 rules

Enable cron Service   [ref]rule

The crond service is used to execute commands at preconfigured times. It is required by almost all systems to perform necessary maintenance tasks, such as notifying root of system activity. The crond service can be enabled with the following command:

$ sudo chkconfig --level 2345 crond on

Rationale:

Due to its usage for maintenance and security-supporting tasks, enabling the cron daemon is essential.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'crond' disable
/sbin/chkconfig --level 0123456 'crond' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
- name: Enable service crond
  service:
    name: crond
    enabled: "yes"
    state: "started"
  tags:
    - service_crond_enabled
    - medium_severity
    - enable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000224

Disable At Service (atd)   [ref]rule

The at and batch commands can be used to schedule tasks that are meant to be executed only once. This allows delayed execution in a manner similar to cron, except that it is not recurring. The daemon atd keeps track of tasks scheduled via at and batch, and executes them at the specified time. The atd service can be disabled with the following command:

$ sudo chkconfig atd off

Rationale:

The atd service could be used by an unsophisticated insider to carry out activities outside of a normal login session, which could complicate accountability. Furthermore, the need to schedule tasks with at or batch is not common.

Severity:  unknown

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'atd' disable
/sbin/chkconfig --level 0123456 'atd' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service atd
  service:
    name: atd
    enabled: "no"
    state: "stopped"
  register: service_result
  failed_when: "service_result is failed and ('Could not find the requested service' not in service_result.msg)"
  tags:
    - service_atd_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000262

DNS Server   [ref]group

Most organizations have an operational need to run at least one nameserver. However, there are many common attacks involving DNS server software, and this server software should be disabled on any system on which it is not needed.

contains 2 rules

Disable DNS Server   [ref]group

DNS software should be disabled on any systems which does not need to be a nameserver. Note that the BIND DNS server software is not installed on Red Hat Enterprise Linux 6 by default. The remainder of this section discusses secure configuration of systems which must be nameservers.

contains 2 rules

Disable named Service   [ref]rule

The named service can be disabled with the following command:

$ sudo chkconfig named off

Rationale:

All network services involve some risk of compromise due to implementation flaws and should be disabled if possible.

Severity:  unknown

References:  2.2.8, CCI-000366, CM-7

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'named' disable
/sbin/chkconfig --level 0123456 'named' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service named
  service:
    name: named
    enabled: "no"
    state: "stopped"
  register: service_result
  failed_when: "service_result is failed and ('Could not find the requested service' not in service_result.msg)"
  tags:
    - service_named_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-CM-7

Uninstall bind Package   [ref]rule

The named service is provided by the bind package. The bind package can be removed with the following command:

$ sudo yum erase bind

Rationale:

If there is no need to make DNS server software available, removing it provides a safeguard against its activation.

Severity:  unknown

References:  CCI-000366, CM-7

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:disable
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove bind
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure bind is removed
  package:
    name: bind
    state: absent
  tags:
    - package_bind_removed
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-CM-7
Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
include remove_bind

class remove_bind {
  package { 'bind':
    ensure => 'purged',
  }
}
Remediation Anaconda snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable

package --remove=bind

LDAP   [ref]group

LDAP is a popular directory service, that is, a standardized way of looking up information from a central database. Red Hat Enterprise Linux 6 includes software that enables a system to act as both an LDAP client and server.

contains 3 rules

Configure OpenLDAP Server   [ref]group

This section details some security-relevant settings for an OpenLDAP server. Installation and configuration of OpenLDAP on Red Hat Enterprise Linux 6 is available at: https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/ch-Directory_Servers.html.

contains 1 rule

Uninstall openldap-servers Package   [ref]rule

The openldap-servers package should be removed if not in use. Is this system the OpenLDAP server? If not, remove the package. The openldap-servers package can be removed with the following command:

$ sudo yum erase openldap-servers
The openldap-servers RPM is not installed by default on a Red Hat Enterprise Linux 6 system. It is needed only by the OpenLDAP server, not by the clients which use LDAP for authentication. If the system is not intended for use as an LDAP Server it should be removed.

Rationale:

Unnecessary packages should not be installed to decrease the attack surface of the system. While this software is clearly essential on an LDAP server, it is not necessary on typical desktop or workstation systems.

Severity:  unknown

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:disable
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove openldap-servers
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure openldap-servers is removed
  package:
    name: openldap-servers
    state: absent
  tags:
    - package_openldap-servers_removed
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000256
Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
include remove_openldap-servers

class remove_openldap-servers {
  package { 'openldap-servers':
    ensure => 'purged',
  }
}
Remediation Anaconda snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable

package --remove=openldap-servers

Configure OpenLDAP Clients   [ref]group

This section provides information on which security settings are important to configure in OpenLDAP clients by manually editing the appropriate configuration files. Red Hat Enterprise Linux 6 provides an automated configuration tool called authconfig and a graphical wrapper for authconfig called system-config-authentication. However, these tools do not provide as much control over configuration as manual editing of configuration files. The authconfig tools do not allow you to specify locations of SSL certificate files, which is useful when trying to use SSL cleanly across several protocols. Installation and configuration of OpenLDAP on Red Hat Enterprise Linux 6 is available at https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/ch-Directory_Servers.html.

Warning:  Before configuring any system to be an LDAP client, ensure that a working LDAP server is present on the network.
contains 2 rules

Configure Certificate Directives for LDAP Use of TLS   [ref]rule

Ensure a copy of a trusted CA certificate has been placed in the file /etc/pki/tls/CA/cacert.pem. Configure LDAP to enforce TLS use and to trust certificates signed by that CA. First, edit the file /etc/pam_ldap.conf, and add or correct either of the following lines:

tls_cacertdir /etc/pki/tls/CA
or
tls_cacertfile /etc/pki/tls/CA/cacert.pem
Then review the LDAP server and ensure TLS has been configured.

Rationale:

The tls_cacertdir or tls_cacertfile directives are required when tls_checkpeer is configured (which is the default for openldap versions 2.1 and up). These directives define the path to the trust certificates signed by the site CA.

Severity:  medium

Configure LDAP Client to Use TLS For All Transactions   [ref]rule

This check verifies that Red Hat Enterprise Linux 6 implements cryptography to protect the integrity of remote LDAP authentication sessions.

To determine if LDAP is being used for authentication, use the following command:

$ sudo grep -i useldapauth /etc/sysconfig/authconfig


If USELDAPAUTH=yes, then LDAP is being used. To check if LDAP is configured to use TLS, use the following command:
$ sudo grep -i ssl /etc/pam_ldap.conf

Rationale:

Without cryptographic integrity protections, information can be altered by unauthorized users without detection. The ssl directive specifies whether to use TLS or not. If not specified it will default to no. It should be set to start_tls rather than doing LDAP over SSL.

Severity:  medium

Remediation Shell script:   (show)



# Use LDAP for authentication
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysconfig/authconfig' 'USELDAPAUTH' 'yes' '' '%s=%s'

# Configure client to use TLS for all authentications
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/nslcd.conf' 'ssl' 'start_tls' '' '%s %s'

Mail Server Software   [ref]group

Mail servers are used to send and receive email over the network. Mail is a very common service, and Mail Transfer Agents (MTAs) are obvious targets of network attack. Ensure that systems are not running MTAs unnecessarily, and configure needed MTAs as defensively as possible.

Very few systems at any site should be configured to directly receive email over the network. Users should instead use mail client programs to retrieve email from a central server that supports protocols such as IMAP or POP3. However, it is normal for most systems to be independently capable of sending email, for instance so that cron jobs can report output to an administrator. Most MTAs, including Postfix, support a submission-only mode in which mail can be sent from the local system to a central site MTA (or directly delivered to a local account), but the system still cannot receive mail directly over a network.

The alternatives program in Red Hat Enterprise Linux permits selection of other mail server software (such as Sendmail), but Postfix is the default and is preferred. Postfix was coded with security in mind and can also be more effectively contained by SELinux as its modular design has resulted in separate processes performing specific actions. More information is available on its website, http://www.postfix.org.

contains 2 rules

Configure SMTP For Mail Clients   [ref]group

This section discusses settings for Postfix in a submission-only e-mail configuration.

contains 1 rule

Disable Postfix Network Listening   [ref]rule

Edit the file /etc/postfix/main.cf to ensure that only the following inet_interfaces line appears:

inet_interfaces = localhost

Rationale:

This ensures postfix accepts mail messages (such as cron job reports) from the local system only, and not from the network, which protects it from network attack.

Severity:  medium

Uninstall Sendmail Package   [ref]rule

Sendmail is not the default mail transfer agent and is not installed by default. The sendmail package can be removed with the following command:

$ sudo yum erase sendmail

Rationale:

The sendmail software was not developed with security in mind and its design prevents it from being effectively contained by SELinux. Postfix should be used instead.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:disable
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove sendmail
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure sendmail is removed
  package:
    name: sendmail
    state: absent
  tags:
    - package_sendmail_removed
    - medium_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000288
Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
include remove_sendmail

class remove_sendmail {
  package { 'sendmail':
    ensure => 'purged',
  }
}
Remediation Anaconda snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable

package --remove=sendmail

Samba(SMB) Microsoft Windows File Sharing Server   [ref]group

When properly configured, the Samba service allows Linux systems to provide file and print sharing to Microsoft Windows systems. There are two software packages that provide Samba support. The first, samba-client, provides a series of command line tools that enable a client system to access Samba shares. The second, simply labeled samba, provides the Samba service. It is this second package that allows a Linux system to act as an Active Directory server, a domain controller, or as a domain member. Only the samba-client package is installed by default.

contains 3 rules

Disable Samba if Possible   [ref]group

Even after the Samba server package has been installed, it will remain disabled. Do not enable this service unless it is absolutely necessary to provide Microsoft Windows file and print sharing functionality.

contains 1 rule

Disable Samba   [ref]rule

The smb service can be disabled with the following command:

$ sudo chkconfig smb off

Rationale:

Running a Samba server provides a network-based avenue of attack, and should be disabled if not needed.

Severity:  unknown

References:  2.2.12, CCI-001436

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'smb' disable
/sbin/chkconfig --level 0123456 'smb' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service smb
  service:
    name: smb
    enabled: "no"
    state: "stopped"
  register: service_result
  failed_when: "service_result is failed and ('Could not find the requested service' not in service_result.msg)"
  tags:
    - service_smb_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption

Configure Samba if Necessary   [ref]group

All settings for the Samba daemon can be found in /etc/samba/smb.conf. Settings are divided between a [global] configuration section and a series of user created share definition sections meant to describe file or print shares on the system. By default, Samba will operate in user mode and allow client systems to access local home directories and printers. It is recommended that these settings be changed or that additional limitations be set in place.

contains 2 rules

Require Client SMB Packet Signing, if using smbclient   [ref]rule

To require samba clients running smbclient to use packet signing, add the following to the [global] section of the Samba configuration file, /etc/samba/smb.conf:

client signing = mandatory
Requiring samba clients such as smbclient to use packet signing ensures they can only communicate with servers that support packet signing.

Rationale:

Packet signing can prevent man-in-the-middle attacks which modify SMB packets in transit.

Severity:  unknown

Remediation Shell script:   (show)

######################################################################
#By Luke "Brisk-OH" Brisk
#luke.brisk@boeing.com or luke.brisk@gmail.com
######################################################################

CLIENTSIGNING=$( grep -ic 'client signing' /etc/samba/smb.conf )

if [ "$CLIENTSIGNING" -eq 0 ];  then
	# Add to global section
	sed -i 's/\[global\]/\[global\]\n\n\tclient signing = mandatory/g' /etc/samba/smb.conf
else
	sed -i 's/[[:blank:]]*client[[:blank:]]signing[[:blank:]]*=[[:blank:]]*no/        client signing = mandatory/g' /etc/samba/smb.conf
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Strategy:configure
- name: Check if /etc/samba/smb.conf exists
  stat:
    path: /etc/samba/smb.conf
  register: st_smb
  tags:
    - require_smb_client_signing
    - unknown_severity
    - configure_strategy
    - low_complexity
    - medium_disruption
    - DISA-STIG-RHEL-06-000272

- name: Require Client SMB Packet Signing, if using smbclient
  lineinfile:
    dest: /etc/samba/smb.conf
    line: client signing = mandatory
    state: present
    insertafter: [global]
  when: st_smb.stat.exists
  tags:
    - require_smb_client_signing
    - unknown_severity
    - configure_strategy
    - low_complexity
    - medium_disruption
    - DISA-STIG-RHEL-06-000272

Require Client SMB Packet Signing, if using mount.cifs   [ref]rule

Require packet signing of clients who mount Samba shares using the mount.cifs program (e.g., those who specify shares in /etc/fstab). To do so, ensure signing options (either sec=krb5i or sec=ntlmv2i) are used.

See the mount.cifs(8) man page for more information. A Samba client should only communicate with servers who can support SMB packet signing.

Rationale:

Packet signing can prevent man-in-the-middle attacks which modify SMB packets in transit.

Severity:  unknown

Web Server   [ref]group

The web server is responsible for providing access to content via the HTTP protocol. Web servers represent a significant security risk because:

  • The HTTP port is commonly probed by malicious sources
  • Web server software is very complex, and includes a long history of vulnerabilities
  • The HTTP protocol is unencrypted and vulnerable to passive monitoring


The system's default web server software is Apache 2 and is provided in the RPM package httpd.

contains 2 rules

Disable Apache if Possible   [ref]group

If Apache was installed and activated, but the system does not need to act as a web server, then it should be disabled and removed from the system.

contains 2 rules

Disable httpd Service   [ref]rule

The httpd service can be disabled with the following command:

$ sudo chkconfig httpd off

Rationale:

Running web server software provides a network-based avenue of attack, and should be disabled if not needed.

Severity:  unknown

References:  2.2.10, CM-7

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'httpd' disable
/sbin/chkconfig --level 0123456 'httpd' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service httpd
  service:
    name: httpd
    enabled: "no"
    state: "stopped"
  register: service_result
  failed_when: "service_result is failed and ('Could not find the requested service' not in service_result.msg)"
  tags:
    - service_httpd_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-CM-7

Uninstall httpd Package   [ref]rule

The httpd package can be removed with the following command:

 $ sudo yum erase httpd

Rationale:

If there is no need to make the web server software available, removing it provides a safeguard against its activation.

Severity:  unknown

References:  CM-7

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:disable
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove httpd
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure httpd is removed
  package:
    name: httpd
    state: absent
  tags:
    - package_httpd_removed
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-CM-7
Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
include remove_httpd

class remove_httpd {
  package { 'httpd':
    ensure => 'purged',
  }
}
Remediation Anaconda snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable

package --remove=httpd

Network Time Protocol   [ref]group

The Network Time Protocol is used to manage the system clock over a network. Computer clocks are not very accurate, so time will drift unpredictably on unmanaged systems. Central time protocols can be used both to ensure that time is consistent among a network of systems, and that their time is consistent with the outside world.

If every system on a network reliably reports the same time, then it is much easier to correlate log messages in case of an attack. In addition, a number of cryptographic protocols (such as Kerberos) use timestamps to prevent certain types of attacks. If your network does not have synchronized time, these protocols may be unreliable or even unusable.

Depending on the specifics of the network, global time accuracy may be just as important as local synchronization, or not very important at all. If your network is connected to the Internet, using a public timeserver (or one provided by your enterprise) provides globally accurate timestamps which may be essential in investigating or responding to an attack which originated outside of your network.

A typical network setup involves a small number of internal systems operating as NTP servers, and the remainder obtaining time information from those internal servers.

There is a choice between the daemons ntpd and chronyd, which are available from the repositories in the ntp and chrony packages respectively.

The default chronyd daemon can work well when external time references are only intermittently accesible, can perform well even when the network is congested for longer periods of time, can usually synchronize the clock faster and with better time accuracy, and quickly adapts to sudden changes in the rate of the clock, for example, due to changes in the temperature of the crystal oscillator. Chronyd should be considered for all systems which are frequently suspended or otherwise intermittently disconnected and reconnected to a network. Mobile and virtual systems for example.

The ntpd NTP daemon fully supports NTP protocol version 4 (RFC 5905), including broadcast, multicast, manycast clients and servers, and the orphan mode. It also supports extra authentication schemes based on public-key cryptography (RFC 5906). The NTP daemon (ntpd) should be considered for systems which are normally kept permanently on. Systems which are required to use broadcast or multicast IP, or to perform authentication of packets with the Autokey protocol, should consider using ntpd.

Refer to https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/html/System_Administrators_Guide/ch-Configuring_NTP_Using_the_chrony_Suite.html for more detailed comparison of features of chronyd and ntpd daemon features respectively, and for further guidance how to choose between the two NTP daemons.

The upstream manual pages at http://chrony.tuxfamily.org/manual.html for chronyd and http://www.ntp.org for ntpd provide additional information on the capabilities and configuration of each of the NTP daemons.

contains 2 rules

Enable the NTP Daemon   [ref]rule

The ntpd service can be enabled with the following command:

$ sudo chkconfig --level 2345 ntpd on

Rationale:

Enabling the ntpd service ensures that the ntpd service will be running and that the system will synchronize its time to any servers specified. This is important whether the system is configured to be a client (and synchronize only its own clock) or it is also acting as an NTP server to other systems. Synchronizing time is essential for authentication services such as Kerberos, but it is also important for maintaining accurate logs and auditing possible security breaches.

The NTP daemon offers all of the functionality of ntpdate, which is now deprecated. Additional information on this is available at http://support.ntp.org/bin/view/Dev/DeprecatingNtpdate.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'ntpd' disable
/sbin/chkconfig --level 0123456 'ntpd' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
- name: Enable service ntpd
  service:
    name: ntpd
    enabled: "yes"
    state: "started"
  tags:
    - service_ntpd_enabled
    - medium_severity
    - enable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AU-8(1)
    - PCI-DSS-Req-10.4
    - DISA-STIG-RHEL-06-000247

Specify a Remote NTP Server   [ref]rule

To specify a remote NTP server for time synchronization, edit the file /etc/ntp.conf. Add or correct the following lines, substituting the IP or hostname of a remote NTP server for ntpserver:

server ntpserver
This instructs the NTP software to contact that remote server to obtain time data.

Rationale:

Synchronizing with an NTP server makes it possible to collate system logs from multiple sources or correlate computer events with real time events.

Severity:  medium

Base Services   [ref]group

This section addresses the base services that are installed on a Red Hat Enterprise Linux 6 default installation which are not covered in other sections. Some of these services listen on the network and should be treated with particular discretion. Other services are local system utilities that may or may not be extraneous. In general, system services should be disabled if not required.

contains 3 rules

Disable KDump Kernel Crash Analyzer (kdump)   [ref]rule

The kdump service provides a kernel crash dump analyzer. It uses the kexec system call to boot a secondary kernel ("capture" kernel) following a system crash, which can load information from the crashed kernel for analysis. The kdump service can be disabled with the following command:

$ sudo chkconfig kdump off

Rationale:

Kernel core dumps may contain the full contents of system memory at the time of the crash. Kernel core dumps consume a considerable amount of disk space and may result in denial of service by exhausting the available space on the target file system partition. Unless the system is used for kernel development or testing, there is little need to run the kdump service.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'kdump' disable
/sbin/chkconfig --level 0123456 'kdump' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service kdump
  service:
    name: kdump
    enabled: "no"
    state: "stopped"
  register: service_result
  failed_when: "service_result is failed and ('Could not find the requested service' not in service_result.msg)"
  tags:
    - service_kdump_disabled
    - medium_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-17(8)
    - NIST-800-53-CM-7
    - NIST-800-53-CM-6(b)
Remediation Anaconda snippet:   (show)


kdump --disable

Disable Red Hat Network Service (rhnsd)   [ref]rule

The Red Hat Network service automatically queries Red Hat Network servers to determine whether there are any actions that should be executed, such as package updates. This only occurs if the system was registered to an RHN server or satellite and managed as such. The rhnsd service can be disabled with the following command:

$ sudo chkconfig rhnsd off

Rationale:

Although systems management and patching is extremely important to system security, management by a system outside the enterprise enclave is not desirable for some environments. However, if the system is being managed by RHN or RHN Satellite Server the rhnsd daemon can remain on.

Severity:  unknown

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'rhnsd' disable
/sbin/chkconfig --level 0123456 'rhnsd' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service rhnsd
  service:
    name: rhnsd
    enabled: "no"
    state: "stopped"
  register: service_result
  failed_when: "service_result is failed and ('Could not find the requested service' not in service_result.msg)"
  tags:
    - service_rhnsd_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-17(8)
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000009

Disable Portreserve (portreserve)   [ref]rule

The portreserve service is a TCP port reservation utility that can be used to prevent portmap from binding to well known TCP ports that are required for other services. The portreserve service can be disabled with the following command:

$ sudo chkconfig portreserve off

Rationale:

The portreserve service provides helpful functionality by preventing conflicting usage of ports in the reserved port range, but it can be disabled if not needed.

Severity:  unknown

References:  AC-17(8), CM-7

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'portreserve' disable
/sbin/chkconfig --level 0123456 'portreserve' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service portreserve
  service:
    name: portreserve
    enabled: "no"
    state: "stopped"
  register: service_result
  failed_when: "service_result is failed and ('Could not find the requested service' not in service_result.msg)"
  tags:
    - service_portreserve_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-17(8)
    - NIST-800-53-CM-7

Proxy Server   [ref]group

A proxy server is a very desirable target for a potential adversary because much (or all) sensitive data for a given infrastructure may flow through it. Therefore, if one is required, the system acting as a proxy server should be dedicated to that purpose alone and be stored in a physically secure location. The system's default proxy server software is Squid, and provided in an RPM package of the same name.

contains 2 rules

Disable Squid if Possible   [ref]group

If Squid was installed and activated, but the system does not need to act as a proxy server, then it should be disabled and removed.

contains 2 rules

Disable Squid   [ref]rule

The squid service can be disabled with the following command:

$ sudo chkconfig squid off

Rationale:

Running proxy server software provides a network-based avenue of attack, and should be removed if not needed.

Severity:  unknown

References:  2.2.13

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'squid' disable
/sbin/chkconfig --level 0123456 'squid' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service squid
  service:
    name: squid
    enabled: "no"
    state: "stopped"
  register: service_result
  failed_when: "service_result is failed and ('Could not find the requested service' not in service_result.msg)"
  tags:
    - service_squid_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption

Uninstall squid Package   [ref]rule

The squid package can be removed with the following command:

 $ sudo yum erase squid

Rationale:

If there is no need to make the proxy server software available, removing it provides a safeguard against its activation.

Severity:  unknown

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:disable
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove squid
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure squid is removed
  package:
    name: squid
    state: absent
  tags:
    - package_squid_removed
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
include remove_squid

class remove_squid {
  package { 'squid':
    ensure => 'purged',
  }
}
Remediation Anaconda snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable

package --remove=squid

DHCP   [ref]group

The Dynamic Host Configuration Protocol (DHCP) allows systems to request and obtain an IP address and other configuration parameters from a server.

This guide recommends configuring networking on clients by manually editing the appropriate files under /etc/sysconfig. Use of DHCP can make client systems vulnerable to compromise by rogue DHCP servers, and should be avoided unless necessary. If using DHCP is necessary, however, there are best practices that should be followed to minimize security risk.

contains 2 rules

Disable DHCP Server   [ref]group

The DHCP server dhcpd is not installed or activated by default. If the software was installed and activated, but the system does not need to act as a DHCP server, it should be disabled and removed.

contains 2 rules

Uninstall DHCP Server Package   [ref]rule

If the system does not need to act as a DHCP server, the dhcp package can be uninstalled. The dhcp package can be removed with the following command:

$ sudo yum erase dhcp

Rationale:

Removing the DHCP server ensures that it cannot be easily or accidentally reactivated and disrupt network operation.

Severity:  medium

References:  CCI-000366, CM-7

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:disable
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove dhcp
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure dhcp is removed
  package:
    name: dhcp
    state: absent
  tags:
    - package_dhcp_removed
    - medium_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-CM-7
Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
include remove_dhcp

class remove_dhcp {
  package { 'dhcp':
    ensure => 'purged',
  }
}
Remediation Anaconda snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable

package --remove=dhcp

Disable DHCP Service   [ref]rule

The dhcpd service should be disabled on any system that does not need to act as a DHCP server. The dhcpd service can be disabled with the following command:

$ sudo chkconfig dhcpd off

Rationale:

Unmanaged or unintentionally activated DHCP servers may provide faulty information to clients, interfering with the operation of a legitimate site DHCP server if there is one.

Severity:  medium

References:  2.2.5, CCI-000366, CM-7

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'dhcpd' disable
/sbin/chkconfig --level 0123456 'dhcpd' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service dhcpd
  service:
    name: dhcpd
    enabled: "no"
    state: "stopped"
  register: service_result
  failed_when: "service_result is failed and ('Could not find the requested service' not in service_result.msg)"
  tags:
    - service_dhcpd_disabled
    - medium_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-CM-7

IMAP and POP3 Server   [ref]group

Dovecot provides IMAP and POP3 services. It is not installed by default. The project page at http://www.dovecot.org contains more detailed information about Dovecot configuration.

contains 2 rules

Disable Dovecot   [ref]group

If the system does not need to operate as an IMAP or POP3 server, the dovecot software should be disabled and removed.

contains 2 rules

Uninstall dovecot Package   [ref]rule

The dovecot package can be removed with the following command:

$ sudo yum erase dovecot

Rationale:

If there is no need to make the Dovecot software available, removing it provides a safeguard against its activation.

Severity:  unknown

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:disable
# Function to remove packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_remove telnet-server
#
function package_remove {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_remove 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if rpm -q --quiet "$package"; then
    dnf remove -y "$package"
  fi
elif which yum ; then
  if rpm -q --quiet "$package"; then
    yum remove -y "$package"
  fi
elif which apt-get ; then
  apt-get remove -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_remove dovecot
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Ensure dovecot is removed
  package:
    name: dovecot
    state: absent
  tags:
    - package_dovecot_removed
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
include remove_dovecot

class remove_dovecot {
  package { 'dovecot':
    ensure => 'purged',
  }
}
Remediation Anaconda snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable

package --remove=dovecot

Disable Dovecot Service   [ref]rule

The dovecot service can be disabled with the following command:

$ sudo chkconfig dovecot off

Rationale:

Running an IMAP or POP3 server provides a network-based avenue of attack, and should be disabled if not needed.

Severity:  unknown

References:  2.2.11

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'dovecot' disable
/sbin/chkconfig --level 0123456 'dovecot' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service dovecot
  service:
    name: dovecot
    enabled: "no"
    state: "stopped"
  register: service_result
  failed_when: "service_result is failed and ('Could not find the requested service' not in service_result.msg)"
  tags:
    - service_dovecot_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption

NFS and RPC   [ref]group

The Network File System is a popular distributed filesystem for the Unix environment, and is very widely deployed. This section discusses the circumstances under which it is possible to disable NFS and its dependencies, and then details steps which should be taken to secure NFS's configuration. This section is relevant to systems operating as NFS clients, as well as to those operating as NFS servers.

contains 7 rules

Disable All NFS Services if Possible   [ref]group

If there is not a reason for the system to operate as either an NFS client or an NFS server, follow all instructions in this section to disable subsystems required by NFS.

Warning:  The steps in this section will prevent a system from operating as either an NFS client or an NFS server. Only perform these steps on systems which do not need NFS at all.
contains 4 rules

Disable Services Used Only by NFS   [ref]group

If NFS is not needed, disable the NFS client daemons nfslock, rpcgssd, and rpcidmapd.

All of these daemons run with elevated privileges, and many listen for network connections. If they are not needed, they should be disabled to improve system security posture.

contains 3 rules

Disable Network File System Lock Service (nfslock)   [ref]rule

The Network File System Lock (nfslock) service starts the required remote procedure call (RPC) processes which allow clients to lock files on the server. If the local system is not configured to mount NFS filesystems then this service should be disabled. The nfslock service can be disabled with the following command:

$ sudo chkconfig nfslock off

Rationale:

Severity:  unknown

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'nfslock' disable
/sbin/chkconfig --level 0123456 'nfslock' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service nfslock
  service:
    name: nfslock
    enabled: "no"
    state: "stopped"
  register: service_result
  failed_when: "service_result is failed and ('Could not find the requested service' not in service_result.msg)"
  tags:
    - service_nfslock_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption

Disable RPC ID Mapping Service (rpcidmapd)   [ref]rule

The rpcidmapd service is used to map user names and groups to UID and GID numbers on NFSv4 mounts. If NFS is not in use on the local system then this service should be disabled. The rpcidmapd service can be disabled with the following command:

$ sudo chkconfig rpcidmapd off

Rationale:

Severity:  unknown

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'rpcidmapd' disable
/sbin/chkconfig --level 0123456 'rpcidmapd' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service rpcidmapd
  service:
    name: rpcidmapd
    enabled: "no"
    state: "stopped"
  register: service_result
  failed_when: "service_result is failed and ('Could not find the requested service' not in service_result.msg)"
  tags:
    - service_rpcidmapd_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption

Disable Secure RPC Client Service (rpcgssd)   [ref]rule

The rpcgssd service manages RPCSEC GSS contexts required to secure protocols that use RPC (most often Kerberos and NFS). The rpcgssd service is the client-side of RPCSEC GSS. If the system does not require secure RPC then this service should be disabled. The rpcgssd service can be disabled with the following command:

$ sudo chkconfig rpcgssd off

Rationale:

Severity:  unknown

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'rpcgssd' disable
/sbin/chkconfig --level 0123456 'rpcgssd' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service rpcgssd
  service:
    name: rpcgssd
    enabled: "no"
    state: "stopped"
  register: service_result
  failed_when: "service_result is failed and ('Could not find the requested service' not in service_result.msg)"
  tags:
    - service_rpcgssd_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption

Disable netfs if Possible   [ref]group

To determine if any network filesystems handled by netfs are currently mounted on the system execute the following command:

$ mount -t nfs,nfs4,smbfs,cifs,ncpfs
If the command did not return any output then disable netfs.

contains 1 rule

Disable Network File Systems (netfs)   [ref]rule

The netfs script manages the boot-time mounting of several types of networked filesystems, of which NFS and Samba are the most common. If these filesystem types are not in use, the script can be disabled, protecting the system somewhat against accidental or malicious changes to /etc/fstab and against flaws in the netfs script itself. The netfs service can be disabled with the following command:

$ sudo chkconfig netfs off

Rationale:

Severity:  unknown

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'netfs' disable
/sbin/chkconfig --level 0123456 'netfs' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service netfs
  service:
    name: netfs
    enabled: "no"
    state: "stopped"
  register: service_result
  failed_when: "service_result is failed and ('Could not find the requested service' not in service_result.msg)"
  tags:
    - service_netfs_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption

Configure NFS Clients   [ref]group

The steps in this section are appropriate for systems which operate as NFS clients.

contains 3 rules

Mount Remote Filesystems with Restrictive Options   [ref]group

Edit the file /etc/fstab. For each filesystem whose type (column 3) is nfs or nfs4, add the text ,nodev,nosuid to the list of mount options in column 4. If appropriate, also add ,noexec.

See the section titled "Restrict Partition Mount Options" for a description of the effects of these options. In general, execution of files mounted via NFS should be considered risky because of the possibility that an adversary could intercept the request and substitute a malicious file. Allowing setuid files to be executed from remote servers is particularly risky, both for this reason and because it requires the clients to extend root-level trust to the NFS server.

contains 2 rules

Mount Remote Filesystems with nosuid   [ref]rule

Add the nosuid option to the fourth column of /etc/fstab for the line which controls mounting of any NFS mounts.

Rationale:

NFS mounts should not present suid binaries to users. Only vendor-supplied suid executables should be installed to their default location on the local filesystem.

Severity:  medium

Remediation Shell script:   (show)

function include_mount_options_functions {
	:
}

# $1: type of filesystem
# $2: new mount point option
function ensure_mount_option_for_vfstype {
        local _vfstype="$1" _new_opt="$2" _vfstype_points=()
        _vfstype_points=($(grep -E "[[:space:]]$_vfstype[[:space:]]" /etc/fstab | awk '{print $2}'))

        for _vfstype_point in "${_vfstype_points[@]}"
        do
                ensure_mount_option_in_fstab "$_vfstype_point" "$_new_opt"
        done
}

# $1: mount point
# $2: new mount point option
function ensure_mount_option_in_fstab {
	local _mount_point="$1" _new_opt="$2" _mount_point_match_regexp="" _previous_mount_opts=""
	_mount_point_match_regexp="$(get_mount_point_regexp "$_mount_point")"

	if [ $(grep "$_mount_point_match_regexp" /etc/fstab | grep -c "$_new_opt" ) -eq 0 ]; then
		_previous_mount_opts=$(grep "$_mount_point_match_regexp" /etc/fstab | awk '{print $4}')
		sed -i "s|\(${_mount_point_match_regexp}.*${_previous_mount_opts}\)|\1,${_new_opt}|" /etc/fstab
	fi
}

# $1: mount point
function get_mount_point_regexp {
		printf "[[:space:]]%s[[:space:]]" "$1"
}

# $1: mount point
function assert_mount_point_in_fstab {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	grep "$_mount_point_match_regexp" -q /etc/fstab \
		|| { echo "The mount point '$1' is not even in /etc/fstab, so we can't set up mount options" >&2; return 1; }
}

# $1: mount point
function remove_defaults_from_fstab_if_overriden {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	if $(grep "$_mount_point_match_regexp" /etc/fstab | grep -q "defaults,")
	then
		sed -i "s|\(${_mount_point_match_regexp}.*\)defaults,|\1|" /etc/fstab
	fi
}

# $1: mount point
function ensure_partition_is_mounted {
	local _mount_point="$1"
	mkdir -p "$_mount_point" || return 1
	if mountpoint -q "$_mount_point"; then
		mount -o remount --target "$_mount_point"
	else
		mount --target "$_mount_point"
	fi
}

include_mount_options_functions

ensure_mount_option_for_vfstype "nfs[4]?" "nosuid"
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Strategy:configure

- name: "Get nfs and nfs4 mount points, that don't have nosuid"
  shell: grep -E "[[:space:]]nfs[4]?[[:space:]]" /etc/fstab | grep -v "nosuid" | awk '{print $2}'
  register: points_register
  check_mode: no
  tags:
    - mount_option_nosuid_remote_filesystems
    - medium_severity
    - configure_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-AC-6
    - DISA-STIG-RHEL-06-000270

- name: "Add nosuid to mount points"
  shell: awk '$2=="{{ item }}"{$4=$4",nosuid"}1' /etc/fstab > fstab.tmp && mv fstab.tmp /etc/fstab
  with_items:
    - "{{ points_register.stdout_lines }}"
  when: points_register.stdout | length > 0
  tags:
    - mount_option_nosuid_remote_filesystems
    - medium_severity
    - configure_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-AC-6
    - DISA-STIG-RHEL-06-000270

Mount Remote Filesystems with nodev   [ref]rule

Add the nodev option to the fourth column of /etc/fstab for the line which controls mounting of any NFS mounts.

Rationale:

Legitimate device files should only exist in the /dev directory. NFS mounts should not present device files to users.

Severity:  medium

Remediation Shell script:   (show)

function include_mount_options_functions {
	:
}

# $1: type of filesystem
# $2: new mount point option
function ensure_mount_option_for_vfstype {
        local _vfstype="$1" _new_opt="$2" _vfstype_points=()
        _vfstype_points=($(grep -E "[[:space:]]$_vfstype[[:space:]]" /etc/fstab | awk '{print $2}'))

        for _vfstype_point in "${_vfstype_points[@]}"
        do
                ensure_mount_option_in_fstab "$_vfstype_point" "$_new_opt"
        done
}

# $1: mount point
# $2: new mount point option
function ensure_mount_option_in_fstab {
	local _mount_point="$1" _new_opt="$2" _mount_point_match_regexp="" _previous_mount_opts=""
	_mount_point_match_regexp="$(get_mount_point_regexp "$_mount_point")"

	if [ $(grep "$_mount_point_match_regexp" /etc/fstab | grep -c "$_new_opt" ) -eq 0 ]; then
		_previous_mount_opts=$(grep "$_mount_point_match_regexp" /etc/fstab | awk '{print $4}')
		sed -i "s|\(${_mount_point_match_regexp}.*${_previous_mount_opts}\)|\1,${_new_opt}|" /etc/fstab
	fi
}

# $1: mount point
function get_mount_point_regexp {
		printf "[[:space:]]%s[[:space:]]" "$1"
}

# $1: mount point
function assert_mount_point_in_fstab {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	grep "$_mount_point_match_regexp" -q /etc/fstab \
		|| { echo "The mount point '$1' is not even in /etc/fstab, so we can't set up mount options" >&2; return 1; }
}

# $1: mount point
function remove_defaults_from_fstab_if_overriden {
	local _mount_point_match_regexp
	_mount_point_match_regexp="$(get_mount_point_regexp "$1")"
	if $(grep "$_mount_point_match_regexp" /etc/fstab | grep -q "defaults,")
	then
		sed -i "s|\(${_mount_point_match_regexp}.*\)defaults,|\1|" /etc/fstab
	fi
}

# $1: mount point
function ensure_partition_is_mounted {
	local _mount_point="$1"
	mkdir -p "$_mount_point" || return 1
	if mountpoint -q "$_mount_point"; then
		mount -o remount --target "$_mount_point"
	else
		mount --target "$_mount_point"
	fi
}

include_mount_options_functions

ensure_mount_option_for_vfstype "nfs[4]?" "nodev"
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Strategy:configure

- name: "Get nfs and nfs4 mount points, that don't have nodev"
  shell: grep -E "[[:space:]]nfs[4]?[[:space:]]" /etc/fstab | grep -v "nodev" | awk '{print $2}'
  register: points_register
  check_mode: no
  tags:
    - mount_option_nodev_remote_filesystems
    - medium_severity
    - configure_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2
    - DISA-STIG-RHEL-06-000269

- name: "Add nodev to mount points"
  shell: awk '$2=="{{ item }}"{$4=$4",nodev"}1' /etc/fstab > fstab.tmp && mv fstab.tmp /etc/fstab
  with_items:
    - "{{ points_register.stdout_lines }}"
  when: points_register.stdout | length > 0
  tags:
    - mount_option_nodev_remote_filesystems
    - medium_severity
    - configure_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-CM-7
    - NIST-800-53-MP-2
    - DISA-STIG-RHEL-06-000269

Disable NFS Server Daemons   [ref]group

There is no need to run the NFS server daemons nfs and rpcsvcgssd except on a small number of properly secured systems designated as NFS servers. Ensure that these daemons are turned off on clients.

contains 1 rule

Disable Secure RPC Server Service (rpcsvcgssd)   [ref]rule

The rpcsvcgssd service manages RPCSEC GSS contexts required to secure protocols that use RPC (most often Kerberos and NFS). The rpcsvcgssd service is the server-side of RPCSEC GSS. If the system does not require secure RPC then this service should be disabled. The rpcsvcgssd service can be disabled with the following command:

$ sudo chkconfig rpcsvcgssd off

Rationale:

Unnecessary services should be disabled to decrease the attack surface of the system.

Severity:  unknown

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'rpcsvcgssd' disable
/sbin/chkconfig --level 0123456 'rpcsvcgssd' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service rpcsvcgssd
  service:
    name: rpcsvcgssd
    enabled: "no"
    state: "stopped"
  register: service_result
  failed_when: "service_result is failed and ('Could not find the requested service' not in service_result.msg)"
  tags:
    - service_rpcsvcgssd_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption

Avahi Server   [ref]group

The Avahi daemon implements the DNS Service Discovery and Multicast DNS protocols, which provide service and host discovery on a network. It allows a system to automatically identify resources on the network, such as printers or web servers. This capability is also known as mDNSresponder and is a major part of Zeroconf networking.

contains 1 rule

Disable Avahi Server if Possible   [ref]group

Because the Avahi daemon service keeps an open network port, it is subject to network attacks. Disabling it can reduce the system's vulnerability to such attacks.

contains 1 rule

Disable Avahi Server Software   [ref]rule

The avahi-daemon service can be disabled with the following command:

$ sudo chkconfig avahi-daemon off

Rationale:

Because the Avahi daemon service keeps an open network port, it is subject to network attacks. Its functionality is convenient but is only appropriate if the local network can be trusted.

Severity:  unknown

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'avahi-daemon' disable
/sbin/chkconfig --level 0123456 'avahi-daemon' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service avahi-daemon
  service:
    name: avahi-daemon
    enabled: "no"
    state: "stopped"
  register: service_result
  failed_when: "service_result is failed and ('Could not find the requested service' not in service_result.msg)"
  tags:
    - service_avahi-daemon_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000246

SSH Server   [ref]group

The SSH protocol is recommended for remote login and remote file transfer. SSH provides confidentiality and integrity for data exchanged between two systems, as well as server authentication, through the use of public key cryptography. The implementation included with the system is called OpenSSH, and more detailed documentation is available from its website, http://www.openssh.org. Its server program is called sshd and provided by the RPM package openssh-server.

contains 10 rules

Configure OpenSSH Server if Necessary   [ref]group

If the system needs to act as an SSH server, then certain changes should be made to the OpenSSH daemon configuration file /etc/ssh/sshd_config. The following recommendations can be applied to this file. See the sshd_config(5) man page for more detailed information.

contains 10 rules

Disable SSH Access via Empty Passwords   [ref]rule

To explicitly disallow SSH login from accounts with empty passwords, add or correct the following line in /etc/ssh/sshd_config:

PermitEmptyPasswords no

Any accounts with empty passwords should be disabled immediately, and PAM configuration should prevent users from being able to assign themselves empty passwords.

Rationale:

Configuring this setting for the SSH daemon provides additional assurance that remote login via SSH will require a password, even in the event of misconfiguration elsewhere.

Severity:  high

Remediation Shell script:   (show)

# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/ssh/sshd_config' '^PermitEmptyPasswords' 'no' '' '%s %s'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Disable SSH Access via Empty Passwords
  lineinfile:
    create: yes
    dest: /etc/ssh/sshd_config
    regexp: ^PermitEmptyPasswords
    line: PermitEmptyPasswords no
    validate: sshd -t -f %s
  tags:
    - sshd_disable_empty_passwords
    - high_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-3
    - NIST-800-53-AC-6
    - NIST-800-53-CM-6(b)
    - NIST-800-171-3.1.1
    - NIST-800-171-3.1.5
    - CJIS-5.5.6
    - DISA-STIG-RHEL-06-000239

Set SSH Client Alive Count   [ref]rule

To ensure the SSH idle timeout occurs precisely when the ClientAliveInterval is set, edit /etc/ssh/sshd_config as follows:

ClientAliveCountMax 0

Rationale:

This ensures a user login will be terminated as soon as the ClientAliveInterval is reached.

Severity:  medium

Remediation Shell script:   (show)

# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/ssh/sshd_config' '^ClientAliveCountMax' '0' '' '%s %s'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Set SSH Client Alive Count
  lineinfile:
    create: yes
    dest: /etc/ssh/sshd_config
    regexp: ^ClientAliveCountMax
    line: ClientAliveCountMax 0
    validate: sshd -t -f %s
  #notify: restart sshd
  tags:
    - sshd_set_keepalive
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-2(5)
    - NIST-800-53-SA-8
    - NIST-800-53-AC-12
    - NIST-800-171-3.1.11
    - CJIS-5.5.6
    - DISA-STIG-RHEL-06-000231

Set SSH Idle Timeout Interval   [ref]rule

SSH allows administrators to set an idle timeout interval. After this interval has passed, the idle user will be automatically logged out.

To set an idle timeout interval, edit the following line in /etc/ssh/sshd_config as follows:

ClientAliveInterval 300
The timeout interval is given in seconds. To have a timeout of 15 minutes, set interval to 900.

If a shorter timeout has already been set for the login shell, that value will preempt any SSH setting made here. Keep in mind that some processes may stop SSH from correctly detecting that the user is idle.

Rationale:

Terminating an idle ssh session within a short time period reduces the window of opportunity for unauthorized personnel to take control of a management session enabled on the console or console port that has been let unattended.

Severity:  unknown

Remediation Shell script:   (show)


sshd_idle_timeout_value="300"
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/ssh/sshd_config' '^ClientAliveInterval' $sshd_idle_timeout_value '' '%s %s'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value sshd_idle_timeout_value # promote to variable
  set_fact:
    sshd_idle_timeout_value: !!str |-
        300
  tags:
    - always

- name: Set SSH Idle Timeout Interval
  lineinfile:
    create: yes
    dest: /etc/ssh/sshd_config
    regexp: ^ClientAliveInterval
    line: "ClientAliveInterval {{ sshd_idle_timeout_value }}"
    validate: sshd -t -f %s
  #notify: restart sshd
  tags:
    - sshd_set_idle_timeout
    - unknown_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-SA-8
    - NIST-800-53-AC-2(5)
    - NIST-800-53-SA-8(i)
    - NIST-800-53-AC-12
    - NIST-800-171-3.1.11
    - PCI-DSS-Req-8.1.8
    - CJIS-5.5.6
    - DISA-STIG-RHEL-06-000230

Enable SSH Warning Banner   [ref]rule

To enable the warning banner and ensure it is consistent across the system, add or correct the following line in /etc/ssh/sshd_config:

Banner /etc/issue
Another section contains information on how to create an appropriate system-wide warning banner.

Rationale:

The warning message reinforces policy awareness during the logon process and facilitates possible legal action against attackers. Alternatively, systems whose ownership should not be obvious should ensure usage of a banner that does not provide easy attribution.

Severity:  medium

Remediation Shell script:   (show)


grep -q ^Banner /etc/ssh/sshd_config && \
  sed -i "s/Banner.*/Banner \/etc\/issue/g" /etc/ssh/sshd_config
if ! [ $? -eq 0 ]; then
    echo "Banner /etc/issue" >> /etc/ssh/sshd_config
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Enable SSH Warning Banner
  lineinfile:
    create: yes
    dest: /etc/ssh/sshd_config
    regexp: ^Banner
    line: Banner /etc/issue
    validate: sshd -t -f %s
  tags:
    - sshd_enable_warning_banner
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-8(a)
    - NIST-800-53-AC-8(b)
    - NIST-800-53-AC-8(c)(1)
    - NIST-800-53-AC-8(c)(2)
    - NIST-800-53-AC-8(c)(3)
    - NIST-800-171-3.1.9
    - CJIS-5.5.6
    - DISA-STIG-RHEL-06-000240

Do Not Allow SSH Environment Options   [ref]rule

To ensure users are not able to override environment options to the SSH daemon, add or correct the following line in /etc/ssh/sshd_config:

PermitUserEnvironment no

Rationale:

SSH environment options potentially allow users to bypass access restriction in some configurations.

Severity:  medium

Remediation Shell script:   (show)

grep -q ^PermitUserEnvironment /etc/ssh/sshd_config && \
  sed -i "s/PermitUserEnvironment.*/PermitUserEnvironment no/g" /etc/ssh/sshd_config
if ! [ $? -eq 0 ]; then
    echo "PermitUserEnvironment no" >> /etc/ssh/sshd_config
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Do Not Allow SSH Environment Options
  lineinfile:
    create: yes
    dest: /etc/ssh/sshd_config
    regexp: ^PermitUserEnvironment
    line: PermitUserEnvironment no
    validate: sshd -t -f %s
  tags:
    - sshd_do_not_permit_user_env
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-CM-6(b)
    - NIST-800-171-3.1.12
    - CJIS-5.5.6
    - DISA-STIG-RHEL-06-000241

Allow Only SSH Protocol 2   [ref]rule

Only SSH protocol version 2 connections should be permitted. The default setting in /etc/ssh/sshd_config is correct, and can be verified by ensuring that the following line appears:

Protocol 2

Warning:  As of openssh-server version 7.4 and above, the only protocol supported is version 2, and line
Protocol 2
in /etc/ssh/sshd_config is not necessary.
Rationale:

SSH protocol version 1 is an insecure implementation of the SSH protocol and has many well-known vulnerability exploits. Exploits of the SSH daemon could provide immediate root access to the system.

Severity:  high

Remediation Shell script:   (show)

# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/ssh/sshd_config' '^Protocol' '2' '' '%s %s'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict

- name: "Allow Only SSH Protocol 2"
  lineinfile:
    dest: /etc/ssh/sshd_config
    regexp: "^Protocol [0-9]"
    line: "Protocol 2"
    validate: sshd -t -f %s
  #notify: :reload ssh
  tags:
    - sshd_allow_only_protocol2
    - high_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-3(10)
    - NIST-800-53-AC-17(8).1(ii)
    - NIST-800-53-IA-5(1)(c)
    - NIST-800-171-3.1.13
    - NIST-800-171-3.5.4
    - CJIS-5.5.6
    - DISA-STIG-RHEL-06-000227

Disable SSH Support for .rhosts Files   [ref]rule

SSH can emulate the behavior of the obsolete rsh command in allowing users to enable insecure access to their accounts via .rhosts files.

To ensure this behavior is disabled, add or correct the following line in /etc/ssh/sshd_config:

IgnoreRhosts yes

Rationale:

SSH trust relationships mean a compromise on one host can allow an attacker to move trivially to other hosts.

Severity:  medium

Remediation Shell script:   (show)

# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/ssh/sshd_config' '^IgnoreRhosts' 'yes' '' '%s %s'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Disable SSH Support for .rhosts Files
  lineinfile:
    create: yes
    dest: /etc/ssh/sshd_config
    regexp: ^IgnoreRhosts
    line: IgnoreRhosts yes
    validate: sshd -t -f %s
  tags:
    - sshd_disable_rhosts
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-3
    - NIST-800-53-CM-6(a)
    - NIST-800-171-3.1.12
    - CJIS-5.5.6
    - DISA-STIG-RHEL-06-000234

Use Only FIPS 140-2 Validated Ciphers   [ref]rule

Limit the ciphers to those algorithms which are FIPS-approved. Counter (CTR) mode is also preferred over cipher-block chaining (CBC) mode. The following line in /etc/ssh/sshd_config demonstrates use of FIPS-approved ciphers:

Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc
The man page sshd_config(5) contains a list of supported ciphers.

Rationale:

Unapproved mechanisms that are used for authentication to the cryptographic module are not verified and therefore cannot be relied upon to provide confidentiality or integrity, and system data may be compromised.
Operating systems utilizing encryption are required to use FIPS-compliant mechanisms for authenticating to cryptographic modules.
FIPS 140-2 is the current standard for validating that mechanisms used to access cryptographic modules utilize authentication that meets industry and government requirements. For government systems, this allows Security Levels 1, 2, 3, or 4 for use on Red Hat Enterprise Linux.

Severity:  medium

Remediation Shell script:   (show)

grep -q ^Ciphers /etc/ssh/sshd_config && \
  sed -i "s/Ciphers.*/Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc/g" /etc/ssh/sshd_config
if ! [ $? -eq 0 ]; then
    echo "Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc" >> /etc/ssh/sshd_config
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Use Only Approved Ciphers
  lineinfile:
    create: yes
    dest: /etc/ssh/sshd_config
    regexp: ^Ciphers
    line: Ciphers aes128-ctr,aes192-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes192-cbc,aes256-cbc
    validate: sshd -t -f %s
  #notify: restart sshd
  tags:
    - sshd_use_approved_ciphers
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-SI-7
    - NIST-800-53-AC-3
    - NIST-800-53-AC-17(2)
    - NIST-800-53-AU-10(5)
    - NIST-800-53-CM-6(b)
    - NIST-800-53-IA-5(1)(c)
    - NIST-800-53-IA-7
    - NIST-800-171-3.1.13
    - NIST-800-171-3.13.11
    - NIST-800-171-3.13.8
    - CJIS-5.5.6
    - DISA-STIG-RHEL-06-000243

Disable Host-Based Authentication   [ref]rule

SSH's cryptographic host-based authentication is more secure than .rhosts authentication. However, it is not recommended that hosts unilaterally trust one another, even within an organization.

To disable host-based authentication, add or correct the following line in /etc/ssh/sshd_config:

HostbasedAuthentication no

Rationale:

SSH trust relationships mean a compromise on one host can allow an attacker to move trivially to other hosts.

Severity:  medium

Remediation Shell script:   (show)

grep -q ^HostbasedAuthentication /etc/ssh/sshd_config && \
  sed -i "s/HostbasedAuthentication.*/HostbasedAuthentication no/g" /etc/ssh/sshd_config
if ! [ $? -eq 0 ]; then
    echo "HostbasedAuthentication no" >> /etc/ssh/sshd_config
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Disable Host-Based Authentication
  lineinfile:
    create: yes
    dest: /etc/ssh/sshd_config
    regexp: ^HostbasedAuthentication
    line: HostbasedAuthentication no
  tags:
    - disable_host_auth
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-3
    - NIST-800-53-CM-6(b)
    - NIST-800-171-3.1.12
    - CJIS-5.5.6
    - DISA-STIG-RHEL-06-000236

System Settings   [ref]group

Contains rules that check correct system settings.

contains 167 rules

Installing and Maintaining Software   [ref]group

The following sections contain information on security-relevant choices during the initial operating system installation process and the setup of software updates.

contains 16 rules

Disk Partitioning   [ref]group

To ensure separation and protection of data, there are top-level system directories which should be placed on their own physical partition or logical volume. The installer's default partitioning scheme creates separate logical volumes for /, /boot, and swap.

  • If starting with any of the default layouts, check the box to \"Review and modify partitioning.\" This allows for the easy creation of additional logical volumes inside the volume group already created, though it may require making /'s logical volume smaller to create space. In general, using logical volumes is preferable to using partitions because they can be more easily adjusted later.
  • If creating a custom layout, create the partitions mentioned in the previous paragraph (which the installer will require anyway), as well as separate ones described in the following sections.
If a system has already been installed, and the default partitioning scheme was used, it is possible but nontrivial to modify it to create separate logical volumes for the directories listed above. The Logical Volume Manager (LVM) makes this possible. See the LVM HOWTO at http://tldp.org/HOWTO/LVM-HOWTO/ for more detailed information on LVM.

contains 5 rules

Ensure /home Located On Separate Partition   [ref]rule

If user home directories will be stored locally, create a separate partition for /home at installation time (or migrate it later using LVM). If /home will be mounted from another system such as an NFS server, then creating a separate partition is not necessary at installation time, and the mountpoint can instead be configured later.

Rationale:

Ensuring that /home is mounted on its own partition enables the setting of more restrictive mount options, and also helps ensure that users cannot trivially fill partitions used for log or audit data storage.

Severity:  low

Ensure /var Located On Separate Partition   [ref]rule

The /var directory is used by daemons and other system services to store frequently-changing data. Ensure that /var has its own partition or logical volume at installation time, or migrate it using LVM.

Rationale:

Ensuring that /var is mounted on its own partition enables the setting of more restrictive mount options. This helps protect system services such as daemons or other programs which use it. It is not uncommon for the /var directory to contain world-writable directories installed by other software packages.

Severity:  low

Ensure /tmp Located On Separate Partition   [ref]rule

The /tmp directory is a world-writable directory used for temporary file storage. Ensure it has its own partition or logical volume at installation time, or migrate it using LVM.

Rationale:

The /tmp partition is used as temporary storage by many programs. Placing /tmp in its own partition enables the setting of more restrictive mount options, which can help protect programs which use it.

Severity:  low

Ensure /var/log/audit Located On Separate Partition   [ref]rule

Audit logs are stored in the /var/log/audit directory. Ensure that it has its own partition or logical volume at installation time, or migrate it later using LVM. Make absolutely certain that it is large enough to store all audit logs that will be created by the auditing daemon.

Rationale:

Placing /var/log/audit in its own partition enables better separation between audit files and other files, and helps ensure that auditing cannot be halted due to the partition running out of space.

Severity:  low

Ensure /var/log Located On Separate Partition   [ref]rule

System logs are stored in the /var/log directory. Ensure that it has its own partition or logical volume at installation time, or migrate it using LVM.

Rationale:

Placing /var/log in its own partition enables better separation between log files and other files in /var/.

Severity:  unknown

System and Software Integrity   [ref]group

System and software integrity can be gained by installing antivirus, increasing system encryption strength with FIPS, verifying installed software, enabling SELinux, installing an Intrusion Prevention System, etc. However, installing or enabling integrity checking tools cannot prevent intrusions, but they can detect that an intrusion may have occurred. Requirements for integrity checking may be highly dependent on the environment in which the system will be used. Snapshot-based approaches such as AIDE may induce considerable overhead in the presence of frequent software updates.

contains 3 rules

Software Integrity Checking   [ref]group

Both the AIDE (Advanced Intrusion Detection Environment) software and the RPM package management system provide mechanisms for verifying the integrity of installed software. AIDE uses snapshots of file metadata (such as hashes) and compares these to current system files in order to detect changes.

The RPM package management system can conduct integrity checks by comparing information in its metadata database with files installed on the system.

contains 3 rules

Verify Integrity with RPM   [ref]group

The RPM package management system includes the ability to verify the integrity of installed packages by comparing the installed files with information about the files taken from the package metadata stored in the RPM database. Although an attacker could corrupt the RPM database (analogous to attacking the AIDE database as described above), this check can still reveal modification of important files. To list which files on the system differ from what is expected by the RPM database:

$ rpm -qVa
See the man page for rpm to see a complete explanation of each column.

contains 2 rules

Verify and Correct File Permissions with RPM   [ref]rule

The RPM package management system can check file access permissions of installed software packages, including many that are important to system security. Verify that the file permissions of system files and commands match vendor values. Check the file permissions with the following command:

$ sudo rpm -Va | grep '^.M'
Output indicates files that do not match vendor defaults. After locating a file with incorrect permissions, run the following command to determine which package owns it:
$ rpm -qf FILENAME

Next, run the following command to reset its permissions to the correct values:
$ sudo rpm --quiet --setperms PACKAGENAME

Warning:  Note: Due to a bug in the gdm package, the RPM verify command may continue to fail even after file permissions have been correctly set on /var/log/gdm. This is being tracked in Red Hat Bugzilla #1277603.
Rationale:

Permissions on system binaries and configuration files that are too generous could allow an unauthorized user to gain privileges that they should not have. The permissions set by the vendor should be maintained. Any deviations from this baseline should be investigated.

Severity:  high

Remediation Shell script:   (show)

Complexity:high
Disruption:medium
Strategy:restrict

# Declare array to hold list of RPM packages we need to correct permissions for
declare -a SETPERMS_RPM_LIST

# Create a list of files on the system having permissions different from what
# is expected by the RPM database
FILES_WITH_INCORRECT_PERMS=($(rpm -Va --nofiledigest | grep '^.M' | awk '{print $NF}'))

# For each file path from that list:
# * Determine the RPM package the file path is shipped by,
# * Include it into SETPERMS_RPM_LIST array

for FILE_PATH in "${FILES_WITH_INCORRECT_PERMS[@]}"
do
	RPM_PACKAGE=$(rpm -qf "$FILE_PATH")
	SETPERMS_RPM_LIST=("${SETPERMS_RPM_LIST[@]}" "$RPM_PACKAGE")
done

# Remove duplicate mention of same RPM in $SETPERMS_RPM_LIST (if any)
SETPERMS_RPM_LIST=( $(echo "${SETPERMS_RPM_LIST[@]}" | tr ' ' '\n' | sort -u | tr '\n' ' ') )

# For each of the RPM packages left in the list -- reset its permissions to the
# correct values
for RPM_PACKAGE in "${SETPERMS_RPM_LIST[@]}"
do
	rpm --quiet --setperms "${RPM_PACKAGE}"
done
Remediation Ansible snippet:   (show)

Complexity:high
Disruption:medium
Strategy:restrict
- name: "Read list of files with incorrect permissions"
  shell: "rpm -Va --nofiledigest | awk '/^.M/ {print $NF}'"
  register: files_with_incorrect_permissions
  failed_when: False
  changed_when: False
  check_mode: no
  tags:
    - rpm_verify_permissions
    - high_severity
    - restrict_strategy
    - high_complexity
    - medium_disruption
    - NIST-800-53-SI-7
    - NIST-800-53-AC-6
    - NIST-800-53-AU-9(1)
    - NIST-800-53-AU-9(3)
    - NIST-800-53-CM-6(d)
    - NIST-800-53-CM-6(3)
    - NIST-800-171-3.3.8
    - NIST-800-171-3.4.1
    - PCI-DSS-Req-11.5
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-06-000518

- name: "Correct file permissions with RPM"
  shell: "rpm --quiet --setperms $(rpm -qf '{{item}}')"
  with_items: "{{ files_with_incorrect_permissions.stdout_lines }}"
  when: files_with_incorrect_permissions.stdout_lines | length > 0
  tags:
    - rpm_verify_permissions
    - high_severity
    - restrict_strategy
    - high_complexity
    - medium_disruption
    - NIST-800-53-SI-7
    - NIST-800-53-AC-6
    - NIST-800-53-AU-9(1)
    - NIST-800-53-AU-9(3)
    - NIST-800-53-CM-6(d)
    - NIST-800-53-CM-6(3)
    - NIST-800-171-3.3.8
    - NIST-800-171-3.4.1
    - PCI-DSS-Req-11.5
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-06-000518

Verify File Hashes with RPM   [ref]rule

Without cryptographic integrity protections, system executables and files can be altered by unauthorized users without detection. The RPM package management system can check the hashes of installed software packages, including many that are important to system security. To verify that the cryptographic hash of system files and commands match vendor values, run the following command to list which files on the system have hashes that differ from what is expected by the RPM database:

$ rpm -Va | grep '^..5'
A "c" in the second column indicates that a file is a configuration file, which may appropriately be expected to change. If the file was not expected to change, investigate the cause of the change using audit logs or other means. The package can then be reinstalled to restore the file. Run the following command to determine which package owns the file:
$ rpm -qf FILENAME
The package can be reinstalled from a yum repository using the command:
$ sudo yum reinstall PACKAGENAME
Alternatively, the package can be reinstalled from trusted media using the command:
$ sudo rpm -Uvh PACKAGENAME

Rationale:

The hashes of important files like system executables should match the information given by the RPM database. Executables with erroneous hashes could be a sign of nefarious activity on the system.

Severity:  high

Remediation Shell script:   (show)


# Find which files have incorrect hash (not in /etc, because there are all system related config. files) and then get files names
files_with_incorrect_hash="$(rpm -Va | grep -E '^..5.* /(bin|sbin|lib|lib64|usr)/' | awk '{print $NF}' )"
# From files names get package names and change newline to space, because rpm writes each package to new line
packages_to_reinstall="$(rpm -qf $files_with_incorrect_hash | tr '\n' ' ')"

yum reinstall -y $packages_to_reinstall
Remediation Ansible snippet:   (show)

Complexity:high
Disruption:medium
- name: "Set fact: Package manager reinstall command (dnf)"
  set_fact:
    package_manager_reinstall_cmd: dnf reinstall -y
  when: ansible_distribution == "Fedora"
  tags:
    - rpm_verify_hashes
    - high_severity
    - unknown_strategy
    - high_complexity
    - medium_disruption
    - NIST-800-53-CM-6(d)
    - NIST-800-53-CM-6(3)
    - NIST-800-53-SI-7(1)
    - NIST-800-171-3.3.8
    - NIST-800-171-3.4.1
    - PCI-DSS-Req-11.5
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-06-000519

- name: "Set fact: Package manager reinstall command (yum)"
  set_fact:
    package_manager_reinstall_cmd: yum reinstall -y
  when: ansible_distribution == "RedHat" or ansible_distribution == "OracleLinux"
  tags:
    - rpm_verify_hashes
    - high_severity
    - unknown_strategy
    - high_complexity
    - medium_disruption
    - NIST-800-53-CM-6(d)
    - NIST-800-53-CM-6(3)
    - NIST-800-53-SI-7(1)
    - NIST-800-171-3.3.8
    - NIST-800-171-3.4.1
    - PCI-DSS-Req-11.5
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-06-000519

- name: "Read files with incorrect hash"
  shell: "rpm -Va | grep -E '^..5.* /(bin|sbin|lib|lib64|usr)/' | awk '{print $NF}'"
  register: files_with_incorrect_hash
  changed_when: False
  when: package_manager_reinstall_cmd is defined
  check_mode: no
  tags:
    - rpm_verify_hashes
    - high_severity
    - unknown_strategy
    - high_complexity
    - medium_disruption
    - NIST-800-53-CM-6(d)
    - NIST-800-53-CM-6(3)
    - NIST-800-53-SI-7(1)
    - NIST-800-171-3.3.8
    - NIST-800-171-3.4.1
    - PCI-DSS-Req-11.5
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-06-000519

- name: "Reinstall packages of files with incorrect hash"
  shell: "{{package_manager_reinstall_cmd}} $(rpm -qf '{{item}}')"
  with_items: "{{ files_with_incorrect_hash.stdout_lines }}"
  when: package_manager_reinstall_cmd is defined and (files_with_incorrect_hash.stdout_lines | length > 0)
  tags:
    - rpm_verify_hashes
    - high_severity
    - unknown_strategy
    - high_complexity
    - medium_disruption
    - NIST-800-53-CM-6(d)
    - NIST-800-53-CM-6(3)
    - NIST-800-53-SI-7(1)
    - NIST-800-171-3.3.8
    - NIST-800-171-3.4.1
    - PCI-DSS-Req-11.5
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-06-000519

Verify Integrity with AIDE   [ref]group

AIDE conducts integrity checks by comparing information about files with previously-gathered information. Ideally, the AIDE database is created immediately after initial system configuration, and then again after any software update. AIDE is highly configurable, with further configuration information located in /usr/share/doc/aide-VERSION.

contains 1 rule

Install AIDE   [ref]rule

The aide package can be installed with the following command:

$ sudo yum install aide

Rationale:

The AIDE package must be installed if it is to be available for integrity checking.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable
# Function to install packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_install aide
#
function package_install {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_install 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if ! rpm -q --quiet "$package"; then
    dnf install -y "$package"
  fi
elif which yum ; then
  if ! rpm -q --quiet "$package"; then
    yum install -y "$package"
  fi
elif which apt-get ; then
  apt-get install -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_install aide
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure aide is installed
  package:
    name: aide
    state: present
  tags:
    - package_aide_installed
    - medium_severity
    - enable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-CM-3(d)
    - NIST-800-53-CM-3(e)
    - NIST-800-53-CM-6(d)
    - NIST-800-53-CM-6(3)
    - NIST-800-53-SC-28
    - NIST-800-53-SI-7
    - PCI-DSS-Req-11.5
    - CJIS-5.10.1.3
    - DISA-STIG-RHEL-06-000016
Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
include install_aide

class install_aide {
  package { 'aide':
    ensure => 'installed',
  }
}
Remediation Anaconda snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable

package --add=aide

Updating Software   [ref]group

The yum command line tool is used to install and update software packages. The system also provides a graphical software update tool in the System menu, in the Administration submenu, called Software Update.

Red Hat Enterprise Linux 6 systems contain an installed software catalog called the RPM database, which records metadata of installed packages. Consistently using yum or the graphical Software Update for all software installation allows for insight into the current inventory of installed software on the system.

contains 4 rules

Ensure gpgcheck Enabled For All yum Package Repositories   [ref]rule

To ensure signature checking is not disabled for any repos, remove any lines from files in /etc/yum.repos.d of the form:

gpgcheck=0

Rationale:

Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. Certificates used to verify the software must be from an approved Certificate Authority (CA).

Severity:  high

Remediation Shell script:   (show)

sed -i 's/gpgcheck=.*/gpgcheck=1/g' /etc/yum.repos.d/*
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
#
- name: Find All yum Repositories
  find:
    paths: "/etc/yum.repos.d/"
    patterns: "*.repo"
  register: yum_find

- name: Ensure gpgcheck Enabled For All yum Package Repositories
  with_items: "{{ yum_find.files }}"
  lineinfile:
    create: yes
    dest: "{{ item.path }}"
    regexp: '^gpgcheck'
    line: 'gpgcheck=1'
  tags:
    - ensure_gpgcheck_never_disabled
    - high_severity
    - unknown_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-CM-5(3)
    - NIST-800-53-SI-7
    - NIST-800-53-MA-1(b)
    - NIST-800-171-3.4.8
    - PCI-DSS-Req-6.2
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-06-000015

Ensure Software Patches Installed   [ref]rule

If the system is joined to the Red Hat Network, a Red Hat Satellite Server, or a yum server, run the following command to install updates:

$ sudo yum update
If the system is not configured to use one of these sources, updates (in the form of RPM packages) can be manually downloaded from the Red Hat Network and installed using rpm.

NOTE: U.S. Defense systems are required to be patched within 30 days or sooner as local policy dictates.

Rationale:

Installing software updates is a fundamental mitigation against the exploitation of publicly-known vulnerabilities. If the most recent security patches and updates are not installed, unauthorized users may take advantage of weaknesses in the unpatched software. The lack of prompt attention to patching could result in a system compromise.

Severity:  high

Remediation Shell script:   (show)

Complexity:low
Disruption:high
Reboot:true
Strategy:patch
yum -y update
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:high
Reboot:true
Strategy:patch
- name: "Security patches are up to date"
  package:
    name: "*"
    state: "latest"
  tags:
    - security_patches_up_to_date
    - high_severity
    - patch_strategy
    - low_complexity
    - high_disruption
    - NIST-800-53-SI-2
    - NIST-800-53-SI-2(c)
    - NIST-800-53-MA-1(b)
    - PCI-DSS-Req-6.2
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-06-000011

Ensure Red Hat GPG Key Installed   [ref]rule

To ensure the system can cryptographically verify base software packages come from Red Hat (and to connect to the Red Hat Network to receive them), the Red Hat GPG key must properly be installed. To install the Red Hat GPG key, run:

$ sudo subscription-manager register
If the system is not connected to the Internet or an RHN Satellite, then install the Red Hat GPG key from trusted media such as the Red Hat installation CD-ROM or DVD. Assuming the disc is mounted in /media/cdrom, use the following command as the root user to import it into the keyring:
$ sudo rpm --import /media/cdrom/RPM-GPG-KEY

Rationale:

Changes to software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor. The Red Hat GPG key is necessary to cryptographically verify packages are from Red Hat.

Severity:  high

Remediation Shell script:   (show)

# The two fingerprints below are retrieved from https://access.redhat.com/security/team/key
readonly REDHAT_RELEASE_2_FINGERPRINT="567E 347A D004 4ADE 55BA 8A5F 199E 2F91 FD43 1D51"
readonly REDHAT_AUXILIARY_FINGERPRINT="43A6 E49C 4A38 F4BE 9ABF 2A53 4568 9C88 2FA6 58E0"
# Location of the key we would like to import (once it's integrity verified)
readonly REDHAT_RELEASE_KEY="/etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release"

RPM_GPG_DIR_PERMS=$(stat -c %a "$(dirname "$REDHAT_RELEASE_KEY")")

# Verify /etc/pki/rpm-gpg directory permissions are safe
if [ "${RPM_GPG_DIR_PERMS}" -le "755" ]
then
  # If they are safe, try to obtain fingerprints from the key file
  # (to ensure there won't be e.g. CRC error).
  IFS=$'\n' GPG_OUT=($(gpg --with-fingerprint "${REDHAT_RELEASE_KEY}" | grep 'Key fingerprint ='))
  GPG_RESULT=$?
  # Reset IFS back to default
  unset IFS
  # No CRC error, safe to proceed
  if [ "${GPG_RESULT}" -eq "0" ]
  then
    tr -s ' ' <<< "${GPG_OUT}" | grep -vE "${REDHAT_RELEASE_2_FINGERPRINT}|${REDHAT_AUXILIARY_FINGERPRINT}" || {
      # If file doesn't contains any keys with unknown fingerprint, import it
      rpm --import "${REDHAT_RELEASE_KEY}"
    }
  fi
fi
Remediation Ansible snippet:   (show)

Complexity:medium
Disruption:medium
Strategy:restrict
- name: "Read permission of GPG key directory"
  stat:
    path: /etc/pki/rpm-gpg/
  register: gpg_key_directory_permission
  check_mode: no
  tags:
    - ensure_redhat_gpgkey_installed
    - high_severity
    - restrict_strategy
    - medium_complexity
    - medium_disruption
    - NIST-800-53-CM-5(3)
    - NIST-800-53-SI-7
    - NIST-800-53-MA-1(b)
    - NIST-800-171-3.4.8
    - PCI-DSS-Req-6.2
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-06-000008

# It should fail if it doesn't find any fingerprints in file - maybe file was not parsed well.

- name: Read signatures in GPG key
  shell: gpg --with-fingerprint '/etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release' | grep 'Key fingerprint =' | tr -s ' ' | sed 's;.*= ;;g'
  changed_when: False
  register: gpg_fingerprints
  check_mode: no
  tags:
    - ensure_redhat_gpgkey_installed
    - high_severity
    - restrict_strategy
    - medium_complexity
    - medium_disruption
    - NIST-800-53-CM-5(3)
    - NIST-800-53-SI-7
    - NIST-800-53-MA-1(b)
    - NIST-800-171-3.4.8
    - PCI-DSS-Req-6.2
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-06-000008

- name: Set Fact - Valid fingerprints
  set_fact:
     gpg_valid_fingerprints: ("567E 347A D004 4ADE 55BA 8A5F 199E 2F91 FD43 1D51" "43A6 E49C 4A38 F4BE 9ABF 2A53 4568 9C88 2FA6 58E0")
  tags:
    - ensure_redhat_gpgkey_installed
    - high_severity
    - restrict_strategy
    - medium_complexity
    - medium_disruption
    - NIST-800-53-CM-5(3)
    - NIST-800-53-SI-7
    - NIST-800-53-MA-1(b)
    - NIST-800-171-3.4.8
    - PCI-DSS-Req-6.2
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-06-000008

- name: Import RedHat GPG key
  rpm_key:
    state: present
    key: /etc/pki/rpm-gpg/RPM-GPG-KEY-redhat-release
  when:
    (gpg_key_directory_permission.stat.mode <= '0755')
    and (( gpg_fingerprints.stdout_lines | difference(gpg_valid_fingerprints)) | length == 0)
    and (gpg_fingerprints.stdout_lines | length > 0)
    and (ansible_distribution == "RedHat")
  tags:
    - ensure_redhat_gpgkey_installed
    - high_severity
    - restrict_strategy
    - medium_complexity
    - medium_disruption
    - NIST-800-53-CM-5(3)
    - NIST-800-53-SI-7
    - NIST-800-53-MA-1(b)
    - NIST-800-171-3.4.8
    - PCI-DSS-Req-6.2
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-06-000008

Ensure gpgcheck Enabled In Main yum Configuration   [ref]rule

The gpgcheck option controls whether RPM packages' signatures are always checked prior to installation. To configure yum to check package signatures before installing them, ensure the following line appears in /etc/yum.conf in the [main] section:

gpgcheck=1

Rationale:

Changes to any software components can have significant effects on the overall security of the operating system. This requirement ensures the software has not been tampered with and that it has been provided by a trusted vendor.
Accordingly, patches, service packs, device drivers, or operating system components must be signed with a certificate recognized and approved by the organization.
Verifying the authenticity of the software prior to installation validates the integrity of the patch or upgrade received from a vendor. This ensures the software has not been tampered with and that it has been provided by a trusted vendor. Self-signed certificates are disallowed by this requirement. Certificates used to verify the software must be from an approved Certificate Authority (CA).

Severity:  high

Remediation Shell script:   (show)

# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append "/etc/yum.conf" '^gpgcheck' '1' ''
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
- name: Check existence of yum on Fedora
  stat:
    path: /etc/yum.conf
  register: yum_config_file
  check_mode: no
  when: ansible_distribution == "Fedora"

# Old versions of Fedora use yum

- name: Ensure GPG check is globally activated (yum)
  ini_file:
    dest: "{{item}}"
    section: main
    option: gpgcheck
    value: 1
    create: False
  with_items: "/etc/yum.conf"
  when: ansible_distribution == "RedHat" or ansible_distribution == "CentOS" or yum_config_file.stat.exists
  tags:
    - ensure_gpgcheck_globally_activated
    - high_severity
    - unknown_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-CM-5(3)
    - NIST-800-53-SI-7
    - NIST-800-53-MA-1(b)
    - NIST-800-171-3.4.8
    - PCI-DSS-Req-6.2
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-06-000013

- name: Ensure GPG check is globally activated (dnf)
  ini_file:
    dest: "{{item}}"
    section: main
    option: gpgcheck
    value: 1
    create: False
  with_items: "/etc/dnf/dnf.conf"
  when: ansible_distribution == "Fedora"
  tags:
    - ensure_gpgcheck_globally_activated
    - high_severity
    - unknown_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-CM-5(3)
    - NIST-800-53-SI-7
    - NIST-800-53-MA-1(b)
    - NIST-800-171-3.4.8
    - PCI-DSS-Req-6.2
    - CJIS-5.10.4.1
    - DISA-STIG-RHEL-06-000013

GNOME Desktop Environment   [ref]group

GNOME is a graphical desktop environment bundled with many Linux distributions that allow users to easily interact with the operating system graphically rather than textually. The GNOME Graphical Display Manager (GDM) provides login, logout, and user switching contexts as well as display server management.

GNOME is developed by the GNOME Project and is considered the default Red Hat Graphical environment.

For more information on GNOME and the GNOME Project, see https://www.gnome.org.

contains 4 rules

Configure GNOME Screen Locking   [ref]group

In the default GNOME desktop, the screen can be locked by choosing Lock Screen from the System menu.

The gconftool-2 program can be used to enforce mandatory screen locking settings for the default GNOME environment. The following sections detail commands to enforce idle activation of the screensaver, screen locking, a blank-screen screensaver, and an idle activation time.

Because users should be trained to lock the screen when they step away from the computer, the automatic locking feature is only meant as a backup. The Lock Screen icon from the System menu can also be dragged to the taskbar in order to facilitate even more convenient screen-locking.

The root account cannot be screen-locked, but this should have no practical effect as the root account should never be used to log into an X Windows environment, and should only be used to for direct login via console in emergency circumstances.

For more information about configuring GNOME screensaver, see http://live.gnome.org/GnomeScreensaver. For more information about enforcing preferences in the GNOME environment using the GConf configuration system, see http://projects.gnome.org/gconf and the man page gconftool-2(1).

contains 4 rules

Implement Blank Screensaver   [ref]rule

Run the following command to set the screensaver mode in the GNOME desktop to a blank screen:

$ sudo gconftool-2 --direct \
  --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory \
  --type string \
  --set /apps/gnome-screensaver/mode blank-only

Rationale:

Setting the screensaver mode to blank-only conceals the contents of the display from passersby.

Severity:  unknown

Remediation Shell script:   (show)

# Install GConf2 package if not installed
if ! rpm -q GConf2; then
  yum -y install GConf2
fi

# Set the screensaver mode in the GNOME desktop to a blank screen
gconftool-2 --direct \
            --config-source "xml:readwrite:/etc/gconf/gconf.xml.mandatory" \
            --type string \
            --set /apps/gnome-screensaver/mode blank-only

Enable Screen Lock Activation After Idle Period   [ref]rule

Run the following command to activate locking of the screensaver in the GNOME desktop when it is activated:

$ sudo gconftool-2 --direct \
  --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory \
  --type bool \
  --set /apps/gnome-screensaver/lock_enabled true

Rationale:

Enabling the activation of the screen lock after an idle period ensures password entry will be required in order to access the system, preventing access by passersby.

Severity:  medium

Remediation Shell script:   (show)

# Install GConf2 package if not installed
if ! rpm -q GConf2; then
  yum -y install GConf2
fi

# Set the screensaver locking activation in the GNOME desktop when the
# screensaver is activated
gconftool-2 --direct \
            --config-source "xml:readwrite:/etc/gconf/gconf.xml.mandatory" \
            --type bool \
            --set /apps/gnome-screensaver/lock_enabled true

GNOME Desktop Screensaver Mandatory Use   [ref]rule

Run the following command to activate the screensaver in the GNOME desktop after a period of inactivity:

$ sudo gconftool-2 --direct \
  --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory \
  --type bool \
  --set /apps/gnome-screensaver/idle_activation_enabled true

Rationale:

Enabling idle activation of the screensaver ensures the screensaver will be activated after the idle delay. Applications requiring continuous, real-time screen display (such as network management products) require the login session does not have administrator rights and the display station is located in a controlled-access area.

Severity:  medium

Remediation Shell script:   (show)

# Install GConf2 package if not installed
if ! rpm -q GConf2; then
  yum -y install GConf2
fi

# Set the screensaver activation in the GNOME desktop after a period of inactivity
gconftool-2 --direct \
            --config-source "xml:readwrite:/etc/gconf/gconf.xml.mandatory" \
            --type bool \
            --set /apps/gnome-screensaver/idle_activation_enabled true

Set GNOME Login Inactivity Timeout   [ref]rule

Run the following command to set the idle time-out value for inactivity in the GNOME desktop to 900 minutes:

$ sudo gconftool-2 \
  --direct \
  --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory \
  --type int \
  --set /desktop/gnome/session/idle_delay 900

Rationale:

Setting the idle delay controls when the screensaver will start, and can be combined with screen locking to prevent access from passersby.

Severity:  medium

Remediation Shell script:   (show)


inactivity_timeout_value="900"

# Install GConf2 package if not installed
if ! rpm -q GConf2; then
  yum -y install GConf2
fi

# Set the idle time-out value for inactivity in the GNOME desktop to meet the
# requirement
gconftool-2 --direct \
            --config-source "xml:readwrite:/etc/gconf/gconf.xml.mandatory" \
            --type int \
            --set /desktop/gnome/session/idle_delay ${inactivity_timeout_value}

Configure Syslog   [ref]group

The syslog service has been the default Unix logging mechanism for many years. It has a number of downsides, including inconsistent log format, lack of authentication for received messages, and lack of authentication, encryption, or reliable transport for messages sent over a network. However, due to its long history, syslog is a de facto standard which is supported by almost all Unix applications.

In Red Hat Enterprise Linux 6, rsyslog has replaced ksyslogd as the syslog daemon of choice, and it includes some additional security features such as reliable, connection-oriented (i.e. TCP) transmission of logs, the option to log to database formats, and the encryption of log data en route to a central logging server. This section discusses how to configure rsyslog for best effect, and how to use tools provided with the system to maintain and monitor logs.

contains 8 rules

Rsyslog Logs Sent To Remote Host   [ref]group

If system logs are to be useful in detecting malicious activities, it is necessary to send logs to a remote server. An intruder who has compromised the root account on a system may delete the log entries which indicate that the system was attacked before they are seen by an administrator.

However, it is recommended that logs be stored on the local host in addition to being sent to the loghost, especially if rsyslog has been configured to use the UDP protocol to send messages over a network. UDP does not guarantee reliable delivery, and moderately busy sites will lose log messages occasionally, especially in periods of high traffic which may be the result of an attack. In addition, remote rsyslog messages are not authenticated in any way by default, so it is easy for an attacker to introduce spurious messages to the central log server. Also, some problems cause loss of network connectivity, which will prevent the sending of messages to the central server. For all of these reasons, it is better to store log messages both centrally and on each host, so that they can be correlated if necessary.

contains 1 rule

Ensure Logs Sent To Remote Host   [ref]rule

To configure rsyslog to send logs to a remote log server, open /etc/rsyslog.conf and read and understand the last section of the file, which describes the multiple directives necessary to activate remote logging. Along with these other directives, the system can be configured to forward its logs to a particular log server by adding or correcting one of the following lines, substituting loghost.example.com appropriately. The choice of protocol depends on the environment of the system; although TCP and RELP provide more reliable message delivery, they may not be supported in all environments.
To use UDP for log message delivery:

*.* @loghost.example.com

To use TCP for log message delivery:
*.* @@loghost.example.com

To use RELP for log message delivery:
*.* :omrelp:loghost.example.com

There must be a resolvable DNS CNAME or Alias record set to "logcollector" for logs to be sent correctly to the centralized logging utility.

Rationale:

A log server (loghost) receives syslog messages from one or more systems. This data can be used as an additional log source in the event a system is compromised and its local logs are suspect. Forwarding log messages to a remote loghost also provides system administrators with a centralized place to view the status of multiple hosts within the enterprise.

Severity:  unknown

Remediation Shell script:   (show)


rsyslog_remote_loghost_address="logcollector"
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/rsyslog.conf' '^\*\.\*' "@@$rsyslog_remote_loghost_address" '' '%s %s'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value rsyslog_remote_loghost_address # promote to variable
  set_fact:
    rsyslog_remote_loghost_address: !!str |-
        logcollector
  tags:
    - always

- name: "Set rsyslog remote loghost"
  lineinfile:
    dest: /etc/rsyslog.conf
    regexp: "^\\*\\.\\*"
    line: "*.* @@{{ rsyslog_remote_loghost_address }}"
    create: yes
  tags:
    - rsyslog_remote_loghost
    - unknown_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AU-3(2)
    - NIST-800-53-AU-4(1)
    - NIST-800-53-AU-9
    - DISA-STIG-RHEL-06-000136

Ensure Proper Configuration of Log Files   [ref]group

The file /etc/rsyslog.conf controls where log message are written. These are controlled by lines called rules, which consist of a selector and an action. These rules are often customized depending on the role of the system, the requirements of the environment, and whatever may enable the administrator to most effectively make use of log data. The default rules in Red Hat Enterprise Linux 6 are:

*.info;mail.none;authpriv.none;cron.none                /var/log/messages
authpriv.*                                              /var/log/secure
mail.*                                                  -/var/log/maillog
cron.*                                                  /var/log/cron
*.emerg                                                 *
uucp,news.crit                                          /var/log/spooler
local7.*                                                /var/log/boot.log
See the man page rsyslog.conf(5) for more information. Note that the rsyslog daemon can be configured to use a timestamp format that some log processing programs may not understand. If this occurs, edit the file /etc/rsyslog.conf and add or edit the following line:
$ ActionFileDefaultTemplate RSYSLOG_TraditionalFileFormat

contains 3 rules

Ensure Log Files Are Owned By Appropriate User   [ref]rule

The owner of all log files written by rsyslog should be (N/A). These log files are determined by the second part of each Rule line in /etc/rsyslog.conf and typically all appear in /var/log. For each log file LOGFILE referenced in /etc/rsyslog.conf, run the following command to inspect the file's owner:

$ ls -l LOGFILE
If the owner is not (N/A), run the following command to correct this:
$ sudo chown (N/A) LOGFILE

Rationale:

The log files generated by rsyslog contain valuable information regarding system configuration, user authentication, and other such information. Log files should be protected from unauthorized access.

Severity:  medium

Ensure Log Files Are Owned By Appropriate Group   [ref]rule

The group-owner of all log files written by rsyslog should be (N/A). These log files are determined by the second part of each Rule line in /etc/rsyslog.conf and typically all appear in /var/log. For each log file LOGFILE referenced in /etc/rsyslog.conf, run the following command to inspect the file's group owner:

$ ls -l LOGFILE
If the owner is not (N/A), run the following command to correct this:
$ sudo chgrp (N/A) LOGFILE

Rationale:

The log files generated by rsyslog contain valuable information regarding system configuration, user authentication, and other such information. Log files should be protected from unauthorized access.

Severity:  medium

Ensure System Log Files Have Correct Permissions   [ref]rule

The file permissions for all log files written by rsyslog should be set to 600, or more restrictive. These log files are determined by the second part of each Rule line in /etc/rsyslog.conf and typically all appear in /var/log. For each log file LOGFILE referenced in /etc/rsyslog.conf, run the following command to inspect the file's permissions:

$ ls -l LOGFILE
If the permissions are not 600 or more restrictive, run the following command to correct this:
$ sudo chmod 0600 LOGFILE

Rationale:

Log files can contain valuable information regarding system configuration. If the system log files are not protected unauthorized users could change the logged data, eliminating their forensic value.

Severity:  medium

Remediation Shell script:   (show)


# List of log file paths to be inspected for correct permissions
# * Primarily inspect log file paths listed in /etc/rsyslog.conf
RSYSLOG_ETC_CONFIG="/etc/rsyslog.conf"
# * And also the log file paths listed after rsyslog's $IncludeConfig directive
#   (store the result into array for the case there's shell glob used as value of IncludeConfig)
RSYSLOG_INCLUDE_CONFIG=($(grep -e "\$IncludeConfig[[:space:]]\+[^[:space:];]\+" /etc/rsyslog.conf | cut -d ' ' -f 2))
# Declare an array to hold the final list of different log file paths
declare -a LOG_FILE_PATHS

# Browse each file selected above as containing paths of log files
# ('/etc/rsyslog.conf' and '/etc/rsyslog.d/*.conf' in the default configuration)
for LOG_FILE in "${RSYSLOG_ETC_CONFIG}" "${RSYSLOG_INCLUDE_CONFIG[@]}"
do
	# From each of these files extract just particular log file path(s), thus:
	# * Ignore lines starting with space (' '), comment ('#"), or variable syntax ('$') characters,
	# * Ignore empty lines,
	# * From the remaining valid rows select only fields constituting a log file path
	# Text file column is understood to represent a log file path if and only if all of the following are met:
	# * it contains at least one slash '/' character,
	# * it doesn't contain space (' '), colon (':'), and semicolon (';') characters
	# Search log file for path(s) only in case it exists!
	if [[ -f "${LOG_FILE}" ]]
	then
		MATCHED_ITEMS=$(sed -e "/^[[:space:]|#|$]/d ; s/[^\/]*[[:space:]]*\([^:;[:space:]]*\)/\1/g ; /^$/d" "${LOG_FILE}")
		# Since above sed command might return more than one item (delimited by newline), split the particular
		# matches entries into new array specific for this log file
		readarray -t ARRAY_FOR_LOG_FILE <<< "$MATCHED_ITEMS"
		# Concatenate the two arrays - previous content of $LOG_FILE_PATHS array with
		# items from newly created array for this log file
		LOG_FILE_PATHS=("${LOG_FILE_PATHS[@]}" "${ARRAY_FOR_LOG_FILE[@]}")
		# Delete the temporary array
		unset ARRAY_FOR_LOG_FILE
	fi
done

for LOG_FILE_PATH in "${LOG_FILE_PATHS[@]}"
do
	# Sanity check - if particular $LOG_FILE_PATH is empty string, skip it from further processing
	if [ -z "$LOG_FILE_PATH" ]
	then
		continue
	fi

	
	# Per https://access.redhat.com/solutions/66805 '/var/log/boot.log' log file needs special care => perform it
	# This has been fixed in RHEL7, the workaround is only necessary for RHEL6
	if [ "$LOG_FILE_PATH" == "/var/log/boot.log" ]
	then
		# Ensure permissions of /var/log/boot.log are configured to be updated in /etc/rc.local
		if ! /bin/grep -q "boot.log" "/etc/rc.local"
		then
			echo "/bin/chmod 600 /var/log/boot.log" >> /etc/rc.local
		fi
		# Ensure /etc/rc.d/rc.local has user-executable permission
		# (in order to be actually executed during boot)
		if [ "$(/usr/bin/stat -c %a /etc/rc.d/rc.local)" -ne 744 ]
		then
			/bin/chmod u+x /etc/rc.d/rc.local
		fi
	fi
	

	# Also for each log file check if its permissions differ from 600. If so, correct them
	if [ "$(/usr/bin/stat -c %a "$LOG_FILE_PATH")" -ne 600 ]
	then
		/bin/chmod 600 "$LOG_FILE_PATH"
	fi
done

Configure rsyslogd to Accept Remote Messages If Acting as a Log Server   [ref]group

By default, rsyslog does not listen over the network for log messages. If needed, modules can be enabled to allow the rsyslog daemon to receive messages from other systems and for the system thus to act as a log server. If the system is not a log server, then lines concerning these modules should remain commented out.

contains 1 rule

Ensure rsyslog Does Not Accept Remote Messages Unless Acting As Log Server   [ref]rule

The rsyslog daemon should not accept remote messages unless the system acts as a log server. To ensure that it is not listening on the network, ensure the following lines are not found in /etc/rsyslog.conf:

$ModLoad imtcp
$InputTCPServerRun port
$ModLoad imudp
$UDPServerRun port
$ModLoad imrelp
$InputRELPServerRun port

Rationale:

Any process which receives messages from the network incurs some risk of receiving malicious messages. This risk can be eliminated for rsyslog by configuring it not to listen on the network.

Severity:  unknown

Ensure All Logs are Rotated by logrotate   [ref]group

Edit the file /etc/logrotate.d/syslog. Find the first line, which should look like this (wrapped for clarity):

/var/log/messages /var/log/secure /var/log/maillog /var/log/spooler \
  /var/log/boot.log /var/log/cron {
Edit this line so that it contains a one-space-separated listing of each log file referenced in /etc/rsyslog.conf.

All logs in use on a system must be rotated regularly, or the log files will consume disk space over time, eventually interfering with system operation. The file /etc/logrotate.d/syslog is the configuration file used by the logrotate program to maintain all log files written by syslog. By default, it rotates logs weekly and stores four archival copies of each log. These settings can be modified by editing /etc/logrotate.conf, but the defaults are sufficient for purposes of this guide.

Note that logrotate is run nightly by the cron job /etc/cron.daily/logrotate. If particularly active logs need to be rotated more often than once a day, some other mechanism must be used.

contains 1 rule

Ensure Logrotate Runs Periodically   [ref]rule

The logrotate utility allows for the automatic rotation of log files. The frequency of rotation is specified in /etc/logrotate.conf, which triggers a cron task. To configure logrotate to run daily, add or correct the following line in /etc/logrotate.conf:

# rotate log files frequency
daily

Rationale:

Log files that are not properly rotated run the risk of growing so large that they fill up the /var/log partition. Valuable logging information could be lost if the /var/log partition becomes full.

Severity:  unknown

Remediation Shell script:   (show)


LOGROTATE_CONF_FILE="/etc/logrotate.conf"
CRON_DAILY_LOGROTATE_FILE="/etc/cron.daily/logrotate"

# daily rotation is configured
grep -q "^daily$" $LOGROTATE_CONF_FILE|| echo "daily" >> $LOGROTATE_CONF_FILE

# remove any line configuring weekly, monthly or yearly rotation
sed -i -r "/^(weekly|monthly|yearly)$/d" $LOGROTATE_CONF_FILE

# configure cron.daily if not already
if ! grep -q "^[[:space:]]*/usr/sbin/logrotate[[:alnum:][:blank:][:punct:]]*$LOGROTATE_CONF_FILE$" $CRON_DAILY_LOGROTATE_FILE; then
	echo "#!/bin/sh" > $CRON_DAILY_LOGROTATE_FILE
	echo "/usr/sbin/logrotate $LOGROTATE_CONF_FILE" >> $CRON_DAILY_LOGROTATE_FILE
fi

Enable rsyslog Service   [ref]rule

The rsyslog service provides syslog-style logging by default on Red Hat Enterprise Linux 6. The rsyslog service can be enabled with the following command:

$ sudo chkconfig --level 2345 rsyslog on

Rationale:

The rsyslog service must be running in order to provide logging services, which are essential to system administration.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'rsyslog' disable
/sbin/chkconfig --level 0123456 'rsyslog' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
- name: Enable service rsyslog
  service:
    name: rsyslog
    enabled: "yes"
    state: "started"
  tags:
    - service_rsyslog_enabled
    - medium_severity
    - enable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AU-4(1)
    - NIST-800-53-AU-12

Ensure rsyslog is Installed   [ref]rule

Rsyslog is installed by default. The rsyslog package can be installed with the following command:

 $ sudo yum install rsyslog

Rationale:

The rsyslog package provides the rsyslog daemon, which provides system logging services.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable
# Function to install packages on RHEL, Fedora, Debian, and possibly other systems.
#
# Example Call(s):
#
#     package_install aide
#
function package_install {

# Load function arguments into local variables
local package="$1"

# Check sanity of the input
if [ $# -ne "1" ]
then
  echo "Usage: package_install 'package_name'"
  echo "Aborting."
  exit 1
fi

if which dnf ; then
  if ! rpm -q --quiet "$package"; then
    dnf install -y "$package"
  fi
elif which yum ; then
  if ! rpm -q --quiet "$package"; then
    yum install -y "$package"
  fi
elif which apt-get ; then
  apt-get install -y "$package"
else
  echo "Failed to detect available packaging system, tried dnf, yum and apt-get!"
  echo "Aborting."
  exit 1
fi

}

package_install rsyslog
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
- name: Ensure rsyslog is installed
  package:
    name: rsyslog
    state: present
  tags:
    - package_rsyslog_installed
    - medium_severity
    - enable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AU-9(2)
Remediation Puppet snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
include install_rsyslog

class install_rsyslog {
  package { 'rsyslog':
    ensure => 'installed',
  }
}
Remediation Anaconda snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable

package --add=rsyslog

Network Configuration and Firewalls   [ref]group

Most systems must be connected to a network of some sort, and this brings with it the substantial risk of network attack. This section discusses the security impact of decisions about networking which must be made when configuring a system.

This section also discusses firewalls, network access controls, and other network security frameworks, which allow system-level rules to be written that can limit an attackers' ability to connect to your system. These rules can specify that network traffic should be allowed or denied from certain IP addresses, hosts, and networks. The rules can also specify which of the system's network services are available to particular hosts or networks.

contains 30 rules

IPv6   [ref]group

The system includes support for Internet Protocol version 6. A major and often-mentioned improvement over IPv4 is its enormous increase in the number of available addresses. Another important feature is its support for automatic configuration of many network settings.

contains 3 rules

Configure IPv6 Settings if Necessary   [ref]group

A major feature of IPv6 is the extent to which systems implementing it can automatically configure their networking devices using information from the network. From a security perspective, manually configuring important configuration information is preferable to accepting it from the network in an unauthenticated fashion.

contains 2 rules

Disable Automatic Configuration   [ref]group

Disable the system's acceptance of router advertisements and redirects by adding or correcting the following line in /etc/sysconfig/network (note that this does not disable sending router solicitations):

IPV6_AUTOCONF=no

contains 2 rules

Configure Accepting IPv6 Router Advertisements by Default   [ref]rule

To set the runtime status of the net.ipv6.conf.default.accept_ra kernel parameter, run the following command:

$ sudo sysctl -w net.ipv6.conf.default.accept_ra=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.default.accept_ra = 0

Rationale:

An illicit router advertisement message could result in a man-in-the-middle attack.

Severity:  unknown

References:  4.4.1.1, 3.3.1, 3.1.20, CM-7

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv6_conf_default_accept_ra_value="0"

#
# Set runtime for net.ipv6.conf.default.accept_ra
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_ra=$sysctl_net_ipv6_conf_default_accept_ra_value

#
# If net.ipv6.conf.default.accept_ra present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_ra = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv6.conf.default.accept_ra' "$sysctl_net_ipv6_conf_default_accept_ra_value" ''
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv6_conf_default_accept_ra_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_default_accept_ra_value: !!str |-
        0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.default.accept_ra is set
  sysctl:
    name: net.ipv6.conf.default.accept_ra
    value: "{{ sysctl_net_ipv6_conf_default_accept_ra_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv6_conf_default_accept_ra
    - unknown_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-CM-7
    - NIST-800-171-3.1.20

Configure Accepting IPv6 Redirects By Default   [ref]rule

To set the runtime status of the net.ipv6.conf.default.accept_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv6.conf.default.accept_redirects=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv6.conf.default.accept_redirects = 0

Rationale:

An illicit ICMP redirect message could result in a man-in-the-middle attack.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv6_conf_default_accept_redirects_value="0"

#
# Set runtime for net.ipv6.conf.default.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv6.conf.default.accept_redirects=$sysctl_net_ipv6_conf_default_accept_redirects_value

#
# If net.ipv6.conf.default.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv6.conf.default.accept_redirects = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv6.conf.default.accept_redirects' "$sysctl_net_ipv6_conf_default_accept_redirects_value" ''
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv6_conf_default_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv6_conf_default_accept_redirects_value: !!str |-
        0
  tags:
    - always

- name: Ensure sysctl net.ipv6.conf.default.accept_redirects is set
  sysctl:
    name: net.ipv6.conf.default.accept_redirects
    value: "{{ sysctl_net_ipv6_conf_default_accept_redirects_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv6_conf_default_accept_redirects
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-CM-7
    - NIST-800-171-3.1.20
    - DISA-STIG-RHEL-06-000099

Disable Support for IPv6 Unless Needed   [ref]group

Despite configuration that suggests support for IPv6 has been disabled, link-local IPv6 address auto-configuration occurs even when only an IPv4 address is assigned. The only way to effectively prevent execution of the IPv6 networking stack is to instruct the system not to activate the IPv6 kernel module.

contains 1 rule

Disable Support for RPC IPv6   [ref]rule

RPC services for NFSv4 try to load transport modules for udp6 and tcp6 by default, even if IPv6 has been disabled in /etc/modprobe.d. To prevent RPC services such as rpc.mountd from attempting to start IPv6 network listeners, remove or comment out the following two lines in /etc/netconfig:

udp6       tpi_clts      v     inet6    udp     -       -
tcp6       tpi_cots_ord  v     inet6    tcp     -       -

Rationale:

Severity:  unknown

References:  3.1.20, CM-7

Remediation Shell script:   (show)


# Drop 'tcp6' and 'udp6' entries from /etc/netconfig to prevent RPC
# services for NFSv4 from attempting to start IPv6 network listeners
declare -a IPV6_RPC_ENTRIES=("tcp6" "udp6")

for rpc_entry in ${IPV6_RPC_ENTRIES[@]}
do
	sed -i "/^$rpc_entry[[:space:]]\+tpi\_.*inet6.*/d" /etc/netconfig
done

iptables and ip6tables   [ref]group

A host-based firewall called netfilter is included as part of the Linux kernel distributed with the system. It is activated by default. This firewall is controlled by the program iptables, and the entire capability is frequently referred to by this name. An analogous program called ip6tables handles filtering for IPv6.

Unlike TCP Wrappers, which depends on the network server program to support and respect the rules written, netfilter filtering occurs at the kernel level, before a program can even process the data from the network packet. As such, any program on the system is affected by the rules written.

This section provides basic information about strengthening the iptables and ip6tables configurations included with the system. For more complete information that may allow the construction of a sophisticated ruleset tailored to your environment, please consult the references at the end of this section.

contains 4 rules

Inspect and Activate Default Rules   [ref]group

View the currently-enforced iptables rules by running the command:

$ sudo iptables -nL --line-numbers
The command is analogous for ip6tables.

If the firewall does not appear to be active (i.e., no rules appear), activate it and ensure that it starts at boot by issuing the following commands (and analogously for ip6tables):
$ sudo service iptables restart
The default iptables rules are:
Chain INPUT (policy ACCEPT)
num  target     prot opt source       destination
1    ACCEPT     all  --  0.0.0.0/0    0.0.0.0/0    state RELATED,ESTABLISHED 
2    ACCEPT     icmp --  0.0.0.0/0    0.0.0.0/0
3    ACCEPT     all  --  0.0.0.0/0    0.0.0.0/0
4    ACCEPT     tcp  --  0.0.0.0/0    0.0.0.0/0    state NEW tcp dpt:22 
5    REJECT     all  --  0.0.0.0/0    0.0.0.0/0    reject-with icmp-host-prohibited 

Chain FORWARD (policy ACCEPT)
num  target     prot opt source       destination
1    REJECT     all  --  0.0.0.0/0    0.0.0.0/0    reject-with icmp-host-prohibited 

Chain OUTPUT (policy ACCEPT)
num  target     prot opt source       destination
The ip6tables default rules are essentially the same.

contains 2 rules

Verify ip6tables Enabled if Using IPv6   [ref]rule

The ip6tables service can be enabled with the following command:

$ sudo chkconfig --level 2345 ip6tables on

Rationale:

The ip6tables service provides the system's host-based firewalling capability for IPv6 and ICMPv6.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'ip6tables' disable
/sbin/chkconfig --level 0123456 'ip6tables' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
- name: Enable service ip6tables
  service:
    name: ip6tables
    enabled: "yes"
    state: "started"
  tags:
    - service_ip6tables_enabled
    - medium_severity
    - enable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-4
    - NIST-800-53-CA-3(c)
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000103

Verify iptables Enabled   [ref]rule

The iptables service can be enabled with the following command:

$ sudo chkconfig --level 2345 iptables on

Rationale:

The iptables service provides the system's host-based firewalling capability for IPv4 and ICMP.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'iptables' disable
/sbin/chkconfig --level 0123456 'iptables' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:enable
- name: Enable service iptables
  service:
    name: iptables
    enabled: "yes"
    state: "started"
  tags:
    - service_iptables_enabled
    - medium_severity
    - enable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-4
    - NIST-800-53-CA-3(c)
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000117

Strengthen the Default Ruleset   [ref]group

The default rules can be strengthened. The system scripts that activate the firewall rules expect them to be defined in the configuration files iptables and ip6tables in the directory /etc/sysconfig. Many of the lines in these files are similar to the command line arguments that would be provided to the programs /sbin/iptables or /sbin/ip6tables - but some are quite different.

The following recommendations describe how to strengthen the default ruleset configuration file. An alternative to editing this configuration file is to create a shell script that makes calls to the iptables program to load in rules, and then invokes service iptables save to write those loaded rules to /etc/sysconfig/iptables.

The following alterations can be made directly to /etc/sysconfig/iptables and /etc/sysconfig/ip6tables. Instructions apply to both unless otherwise noted. Language and address conventions for regular iptables are used throughout this section; configuration for ip6tables will be either analogous or explicitly covered.

Warning:  The program system-config-securitylevel allows additional services to penetrate the default firewall rules and automatically adjusts /etc/sysconfig/iptables. This program is only useful if the default ruleset meets your security requirements. Otherwise, this program should not be used to make changes to the firewall configuration because it re-writes the saved configuration file.
contains 2 rules

Set Default iptables Policy for Forwarded Packets   [ref]rule

To set the default policy to DROP (instead of ACCEPT) for the built-in FORWARD chain which processes packets that will be forwarded from one interface to another, add or correct the following line in /etc/sysconfig/iptables:

:FORWARD DROP [0:0]

Rationale:

In iptables, the default policy is applied only after all the applicable rules in the table are examined for a match. Setting the default policy to DROP implements proper design for a firewall, i.e. any packets which are not explicitly permitted should not be accepted.

Severity:  medium

Remediation Shell script:   (show)

sed -i 's/^:FORWARD ACCEPT.*/:FORWARD DROP [0:0]/g' /etc/sysconfig/iptables

Set Default iptables Policy for Incoming Packets   [ref]rule

To set the default policy to DROP (instead of ACCEPT) for the built-in INPUT chain which processes incoming packets, add or correct the following line in /etc/sysconfig/iptables:

:INPUT DROP [0:0]

Rationale:

In iptables the default policy is applied only after all the applicable rules in the table are examined for a match. Setting the default policy to DROP implements proper design for a firewall, i.e. any packets which are not explicitly permitted should not be accepted.

Severity:  medium

Remediation Shell script:   (show)

sed -i 's/^:INPUT ACCEPT.*/:INPUT DROP [0:0]/g' /etc/sysconfig/iptables

Kernel Parameters Which Affect Networking   [ref]group

The sysctl utility is used to set parameters which affect the operation of the Linux kernel. Kernel parameters which affect networking and have security implications are described here.

contains 14 rules

Network Related Kernel Runtime Parameters for Hosts and Routers   [ref]group

Certain kernel parameters should be set for systems which are acting as either hosts or routers to improve the system's ability defend against certain types of IPv4 protocol attacks.

contains 11 rules

Configure Kernel Parameter for Accepting Source-Routed Packets By Default   [ref]rule

To set the runtime status of the net.ipv4.conf.default.accept_source_route kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.accept_source_route=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.accept_source_route = 0

Rationale:

Source-routed packets allow the source of the packet to suggest routers forward the packet along a different path than configured on the router, which can be used to bypass network security measures.
Accepting source-routed packets in the IPv4 protocol has few legitimate uses. It should be disabled unless it is absolutely required, such as when IPv4 forwarding is enabled and the system is legitimately functioning as a router.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_conf_default_accept_source_route_value="0"

#
# Set runtime for net.ipv4.conf.default.accept_source_route
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.accept_source_route=$sysctl_net_ipv4_conf_default_accept_source_route_value

#
# If net.ipv4.conf.default.accept_source_route present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.accept_source_route = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.default.accept_source_route' "$sysctl_net_ipv4_conf_default_accept_source_route_value" ''
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_conf_default_accept_source_route_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_accept_source_route_value: !!str |-
        0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.accept_source_route is set
  sysctl:
    name: net.ipv4.conf.default.accept_source_route
    value: "{{ sysctl_net_ipv4_conf_default_accept_source_route_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_conf_default_accept_source_route
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-AC-4
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - NIST-800-53-SC-7
    - NIST-800-171-3.1.20
    - CJIS-5.10.1.1
    - DISA-STIG-RHEL-06-000089

Configure Kernel Parameter to Ignore Bogus ICMP Error Responses   [ref]rule

To set the runtime status of the net.ipv4.icmp_ignore_bogus_error_responses kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.icmp_ignore_bogus_error_responses=1
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.icmp_ignore_bogus_error_responses = 1

Rationale:

Ignoring bogus ICMP error responses reduces log size, although some activity would not be logged.

Severity:  unknown

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value="1"

#
# Set runtime for net.ipv4.icmp_ignore_bogus_error_responses
#
/sbin/sysctl -q -n -w net.ipv4.icmp_ignore_bogus_error_responses=$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value

#
# If net.ipv4.icmp_ignore_bogus_error_responses present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.icmp_ignore_bogus_error_responses = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.icmp_ignore_bogus_error_responses' "$sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value" ''
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value # promote to variable
  set_fact:
    sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value: !!str |-
        1
  tags:
    - always

- name: Ensure sysctl net.ipv4.icmp_ignore_bogus_error_responses is set
  sysctl:
    name: net.ipv4.icmp_ignore_bogus_error_responses
    value: "{{ sysctl_net_ipv4_icmp_ignore_bogus_error_responses_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_icmp_ignore_bogus_error_responses
    - unknown_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - NIST-800-171-3.1.20
    - DISA-STIG-RHEL-06-000093

Configure Kernel Parameter for Accepting ICMP Redirects By Default   [ref]rule

To set the runtime status of the net.ipv4.conf.default.accept_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.accept_redirects=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.accept_redirects = 0

Rationale:

ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages modify the host's route table and are unauthenticated. An illicit ICMP redirect message could result in a man-in-the-middle attack.
This feature of the IPv4 protocol has few legitimate uses. It should be disabled unless absolutely required.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_conf_default_accept_redirects_value="0"

#
# Set runtime for net.ipv4.conf.default.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.accept_redirects=$sysctl_net_ipv4_conf_default_accept_redirects_value

#
# If net.ipv4.conf.default.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.accept_redirects = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.default.accept_redirects' "$sysctl_net_ipv4_conf_default_accept_redirects_value" ''
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_conf_default_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_accept_redirects_value: !!str |-
        0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.accept_redirects is set
  sysctl:
    name: net.ipv4.conf.default.accept_redirects
    value: "{{ sysctl_net_ipv4_conf_default_accept_redirects_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_conf_default_accept_redirects
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-AC-4
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - NIST-800-53-SC-7
    - NIST-800-171-3.1.20
    - CJIS-5.10.1.1
    - DISA-STIG-RHEL-06-000091

Configure Kernel Parameter to Use Reverse Path Filtering by Default   [ref]rule

To set the runtime status of the net.ipv4.conf.default.rp_filter kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.rp_filter=1
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.rp_filter = 1

Rationale:

Enabling reverse path filtering drops packets with source addresses that should not have been able to be received on the interface they were received on. It should not be used on systems which are routers for complicated networks, but is helpful for end hosts and routers serving small networks.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_conf_default_rp_filter_value="1"

#
# Set runtime for net.ipv4.conf.default.rp_filter
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.rp_filter=$sysctl_net_ipv4_conf_default_rp_filter_value

#
# If net.ipv4.conf.default.rp_filter present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.rp_filter = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.default.rp_filter' "$sysctl_net_ipv4_conf_default_rp_filter_value" ''
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_conf_default_rp_filter_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_rp_filter_value: !!str |-
        1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.rp_filter is set
  sysctl:
    name: net.ipv4.conf.default.rp_filter
    value: "{{ sysctl_net_ipv4_conf_default_rp_filter_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_conf_default_rp_filter
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-AC-4
    - NIST-800-53-SC-5
    - NIST-800-53-SC-7
    - NIST-800-171-3.1.20
    - DISA-STIG-RHEL-06-000097

Configure Kernel Parameter for Accepting Secure Redirects for All Interfaces   [ref]rule

To set the runtime status of the net.ipv4.conf.all.secure_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.secure_redirects=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.secure_redirects = 0

Rationale:

Accepting "secure" ICMP redirects (from those gateways listed as default gateways) has few legitimate uses. It should be disabled unless it is absolutely required.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_conf_all_secure_redirects_value="0"

#
# Set runtime for net.ipv4.conf.all.secure_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.secure_redirects=$sysctl_net_ipv4_conf_all_secure_redirects_value

#
# If net.ipv4.conf.all.secure_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.secure_redirects = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.all.secure_redirects' "$sysctl_net_ipv4_conf_all_secure_redirects_value" ''
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_conf_all_secure_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_secure_redirects_value: !!str |-
        0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.secure_redirects is set
  sysctl:
    name: net.ipv4.conf.all.secure_redirects
    value: "{{ sysctl_net_ipv4_conf_all_secure_redirects_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_conf_all_secure_redirects
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-AC-4
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - NIST-800-171-3.1.20
    - DISA-STIG-RHEL-06-000086

Configure Kernel Parameter to Use TCP Syncookies   [ref]rule

To set the runtime status of the net.ipv4.tcp_syncookies kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.tcp_syncookies=1
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.tcp_syncookies = 1

Rationale:

A TCP SYN flood attack can cause a denial of service by filling a system's TCP connection table with connections in the SYN_RCVD state. Syncookies can be used to track a connection when a subsequent ACK is received, verifying the initiator is attempting a valid connection and is not a flood source. This feature is activated when a flood condition is detected, and enables the system to continue servicing valid connection requests.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_tcp_syncookies_value="1"

#
# Set runtime for net.ipv4.tcp_syncookies
#
/sbin/sysctl -q -n -w net.ipv4.tcp_syncookies=$sysctl_net_ipv4_tcp_syncookies_value

#
# If net.ipv4.tcp_syncookies present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.tcp_syncookies = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.tcp_syncookies' "$sysctl_net_ipv4_tcp_syncookies_value" ''
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_tcp_syncookies_value # promote to variable
  set_fact:
    sysctl_net_ipv4_tcp_syncookies_value: !!str |-
        1
  tags:
    - always

- name: Ensure sysctl net.ipv4.tcp_syncookies is set
  sysctl:
    name: net.ipv4.tcp_syncookies
    value: "{{ sysctl_net_ipv4_tcp_syncookies_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_tcp_syncookies
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-AC-4
    - NIST-800-53-SC-5(1)(2)
    - NIST-800-53-SC-5(2)
    - NIST-800-53-SC-5(3)
    - NIST-800-171-3.1.20
    - CJIS-5.10.1.1
    - DISA-STIG-RHEL-06-000095

Configure Kernel Parameter for Accepting ICMP Redirects for All Interfaces   [ref]rule

To set the runtime status of the net.ipv4.conf.all.accept_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.accept_redirects=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.accept_redirects = 0

Rationale:

ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages modify the host's route table and are unauthenticated. An illicit ICMP redirect message could result in a man-in-the-middle attack.
This feature of the IPv4 protocol has few legitimate uses. It should be disabled unless absolutely required.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_conf_all_accept_redirects_value="0"

#
# Set runtime for net.ipv4.conf.all.accept_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.accept_redirects=$sysctl_net_ipv4_conf_all_accept_redirects_value

#
# If net.ipv4.conf.all.accept_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.accept_redirects = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.all.accept_redirects' "$sysctl_net_ipv4_conf_all_accept_redirects_value" ''
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_conf_all_accept_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_accept_redirects_value: !!str |-
        0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.accept_redirects is set
  sysctl:
    name: net.ipv4.conf.all.accept_redirects
    value: "{{ sysctl_net_ipv4_conf_all_accept_redirects_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_conf_all_accept_redirects
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-CM-6(d)
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - NIST-800-171-3.1.20
    - CJIS-5.10.1.1
    - DISA-STIG-RHEL-06-000084

Configure Kernel Parameter to Log Martian Packets   [ref]rule

To set the runtime status of the net.ipv4.conf.all.log_martians kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.log_martians=1
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.log_martians = 1

Rationale:

The presence of "martian" packets (which have impossible addresses) as well as spoofed packets, source-routed packets, and redirects could be a sign of nefarious network activity. Logging these packets enables this activity to be detected.

Severity:  unknown

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_conf_all_log_martians_value="1"

#
# Set runtime for net.ipv4.conf.all.log_martians
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.log_martians=$sysctl_net_ipv4_conf_all_log_martians_value

#
# If net.ipv4.conf.all.log_martians present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.log_martians = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.all.log_martians' "$sysctl_net_ipv4_conf_all_log_martians_value" ''
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_conf_all_log_martians_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_log_martians_value: !!str |-
        1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.log_martians is set
  sysctl:
    name: net.ipv4.conf.all.log_martians
    value: "{{ sysctl_net_ipv4_conf_all_log_martians_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_conf_all_log_martians
    - unknown_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-AC-3(10)
    - NIST-800-53-AC-17(7)
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5(3)
    - NIST-800-171-3.1.20
    - DISA-STIG-RHEL-06-000088

Configure Kernel Parameter to Use Reverse Path Filtering for All Interfaces   [ref]rule

To set the runtime status of the net.ipv4.conf.all.rp_filter kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.rp_filter=1
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.rp_filter = 1

Rationale:

Enabling reverse path filtering drops packets with source addresses that should not have been able to be received on the interface they were received on. It should not be used on systems which are routers for complicated networks, but is helpful for end hosts and routers serving small networks.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_conf_all_rp_filter_value="1"

#
# Set runtime for net.ipv4.conf.all.rp_filter
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.rp_filter=$sysctl_net_ipv4_conf_all_rp_filter_value

#
# If net.ipv4.conf.all.rp_filter present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.all.rp_filter = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.all.rp_filter' "$sysctl_net_ipv4_conf_all_rp_filter_value" ''
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_conf_all_rp_filter_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_all_rp_filter_value: !!str |-
        1
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.all.rp_filter is set
  sysctl:
    name: net.ipv4.conf.all.rp_filter
    value: "{{ sysctl_net_ipv4_conf_all_rp_filter_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_conf_all_rp_filter
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-AC-4
    - NIST-800-53-SC-5
    - NIST-800-53-SC-7
    - NIST-800-171-3.1.20
    - DISA-STIG-RHEL-06-000096

Configure Kernel Parameter to Ignore ICMP Broadcast Echo Requests   [ref]rule

To set the runtime status of the net.ipv4.icmp_echo_ignore_broadcasts kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.icmp_echo_ignore_broadcasts=1
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.icmp_echo_ignore_broadcasts = 1

Rationale:

Responding to broadcast (ICMP) echoes facilitates network mapping and provides a vector for amplification attacks.
Ignoring ICMP echo requests (pings) sent to broadcast or multicast addresses makes the system slightly more difficult to enumerate on the network.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value="1"

#
# Set runtime for net.ipv4.icmp_echo_ignore_broadcasts
#
/sbin/sysctl -q -n -w net.ipv4.icmp_echo_ignore_broadcasts=$sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value

#
# If net.ipv4.icmp_echo_ignore_broadcasts present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.icmp_echo_ignore_broadcasts = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.icmp_echo_ignore_broadcasts' "$sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value" ''
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value # promote to variable
  set_fact:
    sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value: !!str |-
        1
  tags:
    - always

- name: Ensure sysctl net.ipv4.icmp_echo_ignore_broadcasts is set
  sysctl:
    name: net.ipv4.icmp_echo_ignore_broadcasts
    value: "{{ sysctl_net_ipv4_icmp_echo_ignore_broadcasts_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_icmp_echo_ignore_broadcasts
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-AC-4
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - NIST-800-171-3.1.20
    - CJIS-5.10.1.1
    - DISA-STIG-RHEL-06-000092

Configure Kernel Parameter for Accepting Secure Redirects By Default   [ref]rule

To set the runtime status of the net.ipv4.conf.default.secure_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.secure_redirects=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.secure_redirects = 0

Rationale:

Accepting "secure" ICMP redirects (from those gateways listed as default gateways) has few legitimate uses. It should be disabled unless it is absolutely required.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable

sysctl_net_ipv4_conf_default_secure_redirects_value="0"

#
# Set runtime for net.ipv4.conf.default.secure_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.secure_redirects=$sysctl_net_ipv4_conf_default_secure_redirects_value

#
# If net.ipv4.conf.default.secure_redirects present in /etc/sysctl.conf, change value to appropriate value
#	else, add "net.ipv4.conf.default.secure_redirects = value" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.default.secure_redirects' "$sysctl_net_ipv4_conf_default_secure_redirects_value" ''
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: XCCDF Value sysctl_net_ipv4_conf_default_secure_redirects_value # promote to variable
  set_fact:
    sysctl_net_ipv4_conf_default_secure_redirects_value: !!str |-
        0
  tags:
    - always

- name: Ensure sysctl net.ipv4.conf.default.secure_redirects is set
  sysctl:
    name: net.ipv4.conf.default.secure_redirects
    value: "{{ sysctl_net_ipv4_conf_default_secure_redirects_value }}"
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_conf_default_secure_redirects
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-AC-4
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - NIST-800-53-SC-7
    - NIST-800-171-3.1.20
    - DISA-STIG-RHEL-06-000090

Network Parameters for Hosts Only   [ref]group

If the system is not going to be used as a router, then setting certain kernel parameters ensure that the host will not perform routing of network traffic.

contains 3 rules

Disable Kernel Parameter for IP Forwarding   [ref]rule

To set the runtime status of the net.ipv4.ip_forward kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.ip_forward=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.ip_forward = 0

Rationale:

Routing protocol daemons are typically used on routers to exchange network topology information with other routers. If this capability is used when not required, system network information may be unnecessarily transmitted across the network.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable


#
# Set runtime for net.ipv4.ip_forward
#
/sbin/sysctl -q -n -w net.ipv4.ip_forward=0

#
# If net.ipv4.ip_forward present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.ip_forward = 0" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.ip_forward' "0" ''
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure sysctl net.ipv4.ip_forward is set to 0
  sysctl:
    name: net.ipv4.ip_forward
    value: 0
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_ip_forward
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - NIST-800-53-SC-32
    - NIST-800-171-3.1.20
    - DISA-STIG-RHEL-06-000082

Disable Kernel Parameter for Sending ICMP Redirects for All Interfaces   [ref]rule

To set the runtime status of the net.ipv4.conf.all.send_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.all.send_redirects=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.all.send_redirects = 0

Rationale:

ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table possibly revealing portions of the network topology.
The ability to send ICMP redirects is only appropriate for systems acting as routers.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable


#
# Set runtime for net.ipv4.conf.all.send_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.all.send_redirects=0

#
# If net.ipv4.conf.all.send_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.all.send_redirects = 0" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.all.send_redirects' "0" ''
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure sysctl net.ipv4.conf.all.send_redirects is set to 0
  sysctl:
    name: net.ipv4.conf.all.send_redirects
    value: 0
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_conf_all_send_redirects
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-AC-4
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5(1)
    - NIST-800-171-3.1.20
    - CJIS-5.10.1.1
    - DISA-STIG-RHEL-06-000081

Disable Kernel Parameter for Sending ICMP Redirects by Default   [ref]rule

To set the runtime status of the net.ipv4.conf.default.send_redirects kernel parameter, run the following command:

$ sudo sysctl -w net.ipv4.conf.default.send_redirects=0
If this is not the system default value, add the following line to a file in the directory /etc/sysctl.d:
net.ipv4.conf.default.send_redirects = 0

Rationale:

ICMP redirect messages are used by routers to inform hosts that a more direct route exists for a particular destination. These messages contain information from the system's route table possibly revealing portions of the network topology.
The ability to send ICMP redirects is only appropriate for systems acting as routers.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable


#
# Set runtime for net.ipv4.conf.default.send_redirects
#
/sbin/sysctl -q -n -w net.ipv4.conf.default.send_redirects=0

#
# If net.ipv4.conf.default.send_redirects present in /etc/sysctl.conf, change value to "0"
#	else, add "net.ipv4.conf.default.send_redirects = 0" to /etc/sysctl.conf
#
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysctl.conf' '^net.ipv4.conf.default.send_redirects' "0" ''
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure sysctl net.ipv4.conf.default.send_redirects is set to 0
  sysctl:
    name: net.ipv4.conf.default.send_redirects
    value: 0
    state: present
    reload: yes
  tags:
    - sysctl_net_ipv4_conf_default_send_redirects
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-AC-4
    - NIST-800-53-CM-7
    - NIST-800-53-SC-5
    - NIST-800-53-SC-7
    - NIST-800-171-3.1.20
    - CJIS-5.10.1.1
    - DISA-STIG-RHEL-06-000080

Uncommon Network Protocols   [ref]group

The system includes support for several network protocols which are not commonly used. Although security vulnerabilities in kernel networking code are not frequently discovered, the consequences can be dramatic. Ensuring uncommon network protocols are disabled reduces the system's risk to attacks targeted at its implementation of those protocols.

Warning:  Although these protocols are not commonly used, avoid disruption in your network environment by ensuring they are not needed prior to disabling them.
contains 4 rules

Disable DCCP Support   [ref]rule

The Datagram Congestion Control Protocol (DCCP) is a relatively new transport layer protocol, designed to support streaming media and telephony. To configure the system to prevent the dccp kernel module from being loaded, add the following line to a file in the directory /etc/modprobe.d:

install dccp /bin/true

Rationale:

Disabling DCCP protects the system against exploitation of any flaws in its implementation.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
if LC_ALL=C grep -q -m 1 "^install dccp" /etc/modprobe.d/dccp.conf ; then
	sed -i 's/^install dccp.*/install dccp /bin/true/g' /etc/modprobe.d/dccp.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/dccp.conf
	echo "install dccp /bin/true" >> /etc/modprobe.d/dccp.conf
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'dccp' is disabled
  lineinfile:
    create: yes
    dest: "/etc/modprobe.d/dccp.conf"
    regexp: 'dccp'
    line: "install dccp /bin/true"
  tags:
    - kernel_module_dccp_disabled
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-CM-7
    - NIST-800-171-3.4.6
    - CJIS-5.10.1
    - DISA-STIG-RHEL-06-000124
    - DISA-STIG-020101

Disable RDS Support   [ref]rule

The Reliable Datagram Sockets (RDS) protocol is a transport layer protocol designed to provide reliable high- bandwidth, low-latency communications between nodes in a cluster. To configure the system to prevent the rds kernel module from being loaded, add the following line to a file in the directory /etc/modprobe.d:

install rds /bin/true

Rationale:

Disabling RDS protects the system against exploitation of any flaws in its implementation.

Severity:  unknown

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
if LC_ALL=C grep -q -m 1 "^install rds" /etc/modprobe.d/rds.conf ; then
	sed -i 's/^install rds.*/install rds /bin/true/g' /etc/modprobe.d/rds.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/rds.conf
	echo "install rds /bin/true" >> /etc/modprobe.d/rds.conf
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'rds' is disabled
  lineinfile:
    create: yes
    dest: "/etc/modprobe.d/rds.conf"
    regexp: 'rds'
    line: "install rds /bin/true"
  tags:
    - kernel_module_rds_disabled
    - unknown_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000126

Disable SCTP Support   [ref]rule

The Stream Control Transmission Protocol (SCTP) is a transport layer protocol, designed to support the idea of message-oriented communication, with several streams of messages within one connection. To configure the system to prevent the sctp kernel module from being loaded, add the following line to a file in the directory /etc/modprobe.d:

install sctp /bin/true

Rationale:

Disabling SCTP protects the system against exploitation of any flaws in its implementation.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
if LC_ALL=C grep -q -m 1 "^install sctp" /etc/modprobe.d/sctp.conf ; then
	sed -i 's/^install sctp.*/install sctp /bin/true/g' /etc/modprobe.d/sctp.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/sctp.conf
	echo "install sctp /bin/true" >> /etc/modprobe.d/sctp.conf
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'sctp' is disabled
  lineinfile:
    create: yes
    dest: "/etc/modprobe.d/sctp.conf"
    regexp: 'sctp'
    line: "install sctp /bin/true"
  tags:
    - kernel_module_sctp_disabled
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-CM-7
    - NIST-800-171-3.4.6
    - CJIS-5.10.1
    - DISA-STIG-RHEL-06-000125

Disable TIPC Support   [ref]rule

The Transparent Inter-Process Communication (TIPC) protocol is designed to provide communications between nodes in a cluster. To configure the system to prevent the tipc kernel module from being loaded, add the following line to a file in the directory /etc/modprobe.d:

install tipc /bin/true

Rationale:

Disabling TIPC protects the system against exploitation of any flaws in its implementation.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
if LC_ALL=C grep -q -m 1 "^install tipc" /etc/modprobe.d/tipc.conf ; then
	sed -i 's/^install tipc.*/install tipc /bin/true/g' /etc/modprobe.d/tipc.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/tipc.conf
	echo "install tipc /bin/true" >> /etc/modprobe.d/tipc.conf
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'tipc' is disabled
  lineinfile:
    create: yes
    dest: "/etc/modprobe.d/tipc.conf"
    regexp: 'tipc'
    line: "install tipc /bin/true"
  tags:
    - kernel_module_tipc_disabled
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-CM-7
    - DISA-STIG-RHEL-06-000127

Wireless Networking   [ref]group

Wireless networking, such as 802.11 (WiFi) and Bluetooth, can present a security risk to sensitive or classified systems and networks. Wireless networking hardware is much more likely to be included in laptop or portable systems than in desktops or servers.

Removal of hardware provides the greatest assurance that the wireless capability remains disabled. Acquisition policies often include provisions to prevent the purchase of equipment that will be used in sensitive spaces and includes wireless capabilities. If it is impractical to remove the wireless hardware, and policy permits the device to enter sensitive spaces as long as wireless is disabled, efforts should instead focus on disabling wireless capability via software.

contains 4 rules

Disable Wireless Through Software Configuration   [ref]group

If it is impossible to remove the wireless hardware from the device in question, disable as much of it as possible through software. The following methods can disable software support for wireless networking, but note that these methods do not prevent malicious software or careless users from re-activating the devices.

contains 4 rules

Disable Bluetooth Kernel Modules   [ref]rule

The kernel's module loading system can be configured to prevent loading of the Bluetooth module. Add the following to the appropriate /etc/modprobe.d configuration file to prevent the loading of the Bluetooth module:

install bluetooth /bin/true

Rationale:

If Bluetooth functionality must be disabled, preventing the kernel from loading the kernel module provides an additional safeguard against its activation.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
if LC_ALL=C grep -q -m 1 "^install bluetooth" /etc/modprobe.d/bluetooth.conf ; then
	sed -i 's/^install bluetooth.*/install bluetooth /bin/true/g' /etc/modprobe.d/bluetooth.conf
else
	echo -e "\n# Disable per security requirements" >> /etc/modprobe.d/bluetooth.conf
	echo "install bluetooth /bin/true" >> /etc/modprobe.d/bluetooth.conf
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Reboot:true
Strategy:disable
- name: Ensure kernel module 'bluetooth' is disabled
  lineinfile:
    create: yes
    dest: "/etc/modprobe.d/bluetooth.conf"
    regexp: 'bluetooth'
    line: "install bluetooth /bin/true"
  tags:
    - kernel_module_bluetooth_disabled
    - medium_severity
    - disable_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-AC-17(8)
    - NIST-800-53-AC-18(a)
    - NIST-800-53-AC-18(d)
    - NIST-800-53-AC-18(3)
    - NIST-800-53-CM-7
    - NIST-800-171-3.1.16
    - CJIS-5.13.1.3
    - DISA-STIG-RHEL-06-000315

Disable WiFi or Bluetooth in BIOS   [ref]rule

Some machines that include built-in wireless support offer the ability to disable the device through the BIOS. This is hardware-specific; consult your hardware manual or explore the BIOS setup during boot.

Rationale:

Disabling wireless support in the BIOS prevents easy activation of the wireless interface, generally requiring administrators to reboot the system first.

Severity:  unknown

Disable Bluetooth Service   [ref]rule

The bluetooth service can be disabled with the following command:

$ sudo chkconfig bluetooth off
$ sudo service bluetooth stop

Rationale:

Disabling the bluetooth service prevents the system from attempting connections to Bluetooth devices, which entails some security risk. Nevertheless, variation in this risk decision may be expected due to the utility of Bluetooth connectivity and its limited range.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:enable

/sbin/service 'bluetooth' disable
/sbin/chkconfig --level 0123456 'bluetooth' off
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:disable
- name: Disable service bluetooth
  service:
    name: bluetooth
    enabled: "no"
    state: "stopped"
  register: service_result
  failed_when: "service_result is failed and ('Could not find the requested service' not in service_result.msg)"
  tags:
    - service_bluetooth_disabled
    - medium_severity
    - disable_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-17(8)
    - NIST-800-53-AC-18(a)
    - NIST-800-53-AC-18(d)
    - NIST-800-53-AC-18(3)
    - NIST-800-53-CM-7
    - NIST-800-171-3.1.16
    - DISA-STIG-RHEL-06-000331

Deactivate Wireless Network Interfaces   [ref]rule

Deactivating wireless network interfaces should prevent normal usage of the wireless capability.

Configure the system to disable all wireless network interfaces with the following command:

$ sudo nmcli radio wifi off

Rationale:

The use of wireless networking can introduce many different attack vectors into the organization's network. Common attack vectors such as malicious association and ad hoc networks will allow an attacker to spoof a wireless access point (AP), allowing validated systems to connect to the malicious AP and enabling the attacker to monitor and record network traffic. These malicious APs can also serve to create a man-in-the-middle attack or be used to create a denial of service to valid network resources.

Severity:  medium

Disable Zeroconf Networking   [ref]rule

Zeroconf networking allows the system to assign itself an IP address and engage in IP communication without a statically-assigned address or even a DHCP server. Automatic address assignment via Zeroconf (or DHCP) is not recommended. To disable Zeroconf automatic route assignment in the 169.254.0.0 subnet, add or correct the following line in /etc/sysconfig/network:

NOZEROCONF=yes

Rationale:

Zeroconf addresses are in the network 169.254.0.0. The networking scripts add entries to the system's routing table for these addresses. Zeroconf address assignment commonly occurs when the system is configured to use DHCP but fails to receive an address assignment from the DHCP server.

Severity:  unknown

References:  CM-7

Remediation Shell script:   (show)

echo "NOZEROCONF=yes" >> /etc/sysconfig/network

SELinux   [ref]group

SELinux is a feature of the Linux kernel which can be used to guard against misconfigured or compromised programs. SELinux enforces the idea that programs should be limited in what files they can access and what actions they can take.

The default SELinux policy, as configured on Red Hat Enterprise Linux 6, has been sufficiently developed and debugged that it should be usable on almost any Red Hat system with minimal configuration and a small amount of system administrator training. This policy prevents system services - including most of the common network-visible services such as mail servers, FTP servers, and DNS servers - from accessing files which those services have no valid reason to access. This action alone prevents a huge amount of possible damage from network attacks against services, from trojaned software, and so forth.

This guide recommends that SELinux be enabled using the default (targeted) policy on every Red Hat system, unless that system has unusual requirements which make a stronger policy appropriate.

contains 5 rules

Ensure SELinux Not Disabled in /etc/grub.conf   [ref]rule

SELinux can be disabled at boot time by an argument in /etc/grub.conf. Remove any instances of selinux=0 from the kernel arguments in that file to prevent SELinux from being disabled at boot.

Rationale:

Disabling a major host protection feature, such as SELinux, at boot time prevents it from confining system services at boot time. Further, it increases the chances that it will remain off during system operation.

Severity:  medium

Remediation Shell script:   (show)

sed -i --follow-symlinks "s/selinux=0//gI" /etc/grub.conf
sed -i --follow-symlinks "s/enforcing=0//gI" /etc/grub.conf

Configure SELinux Policy   [ref]rule

The SELinux targeted policy is appropriate for general-purpose desktops and servers, as well as systems in many other roles. To configure the system to use this policy, add or correct the following line in /etc/selinux/config:

SELINUXTYPE=targeted
Other policies, such as mls, provide additional security labeling and greater confinement but are not compatible with many general-purpose use cases.

Rationale:

Setting the SELinux policy to targeted or a more specialized policy ensures the system will confine processes that are likely to be targeted for exploitation, such as network or system services.

Note: During the development or debugging of SELinux modules, it is common to temporarily place non-production systems in permissive mode. In such temporary cases, SELinux policies should be developed, and once work is completed, the system should be reconfigured to targeted.

Severity:  high

Remediation Shell script:   (show)


var_selinux_policy_name="targeted"
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysconfig/selinux' '^SELINUXTYPE=' $var_selinux_policy_name '' '%s=%s'
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value var_selinux_policy_name # promote to variable
  set_fact:
    var_selinux_policy_name: !!str |-
        targeted
  tags:
    - always

- name: "Configure SELinux Policy"
  lineinfile:
    path: /etc/sysconfig/selinux
    regexp: '^SELINUXTYPE='
    line: "SELINUXTYPE={{ var_selinux_policy_name }}"
    create: yes
  tags:
    - selinux_policytype
    - high_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-3
    - NIST-800-53-AC-3(3)
    - NIST-800-53-AC-3(4)
    - NIST-800-53-AC-4
    - NIST-800-53-AC-6
    - NIST-800-53-AU-9
    - NIST-800-53-SI-6(a)
    - NIST-800-171-3.1.2
    - NIST-800-171-3.7.2
    - DISA-STIG-RHEL-06-000023

Ensure No Daemons are Unconfined by SELinux   [ref]rule

Daemons for which the SELinux policy does not contain rules will inherit the context of the parent process. Because daemons are launched during startup and descend from the init process, they inherit the initrc_t context.

To check for unconfined daemons, run the following command:

$ sudo ps -eZ | egrep "initrc" | egrep -vw "tr|ps|egrep|bash|awk" | tr ':' ' ' | awk '{ print $NF }'
It should produce no output in a well-configured system.

Warning:  Automatic remediation of this control is not available. Remediation can be achieved by amending SELinux policy or stopping the unconfined daemons as outlined above.
Rationale:

Daemons which run with the initrc_t context may cause AVC denials, or allow privileges that the daemon does not require.

Severity:  medium

Ensure No Device Files are Unlabeled by SELinux   [ref]rule

Device files, which are used for communication with important system resources, should be labeled with proper SELinux types. If any device files do not carry the SELinux type device_t, report the bug so that policy can be corrected. Supply information about what the device is and what programs use it.

To check for unlabeled device files, run the following command:

$ sudo find /dev -context *:device_t:* \( -type c -o -type b \) -printf "%p %Z\n"
It should produce no output in a well-configured system.

Warning:  Automatic remediation of this control is not available. The remediation can be achieved by amending SELinux policy.
Rationale:

If a device file carries the SELinux type device_t, then SELinux cannot properly restrict access to the device file.

Severity:  medium

Ensure SELinux State is Enforcing   [ref]rule

The SELinux state should be set to enforcing at system boot time. In the file /etc/selinux/config, add or correct the following line to configure the system to boot into enforcing mode:

SELINUX=enforcing

Rationale:

Setting the SELinux state to enforcing ensures SELinux is able to confine potentially compromised processes to the security policy, which is designed to prevent them from causing damage to the system or further elevating their privileges.

Severity:  high

Remediation Shell script:   (show)


var_selinux_state="enforcing"
# Function to replace configuration setting in config file or add the configuration setting if
# it does not exist.
#
# Expects arguments:
#
# config_file:		Configuration file that will be modified
# key:			Configuration option to change
# value:		Value of the configuration option to change
# cce:			The CCE identifier or '@CCENUM@' if no CCE identifier exists
# format:		The printf-like format string that will be given stripped key and value as arguments,
#			so e.g. '%s=%s' will result in key=value subsitution (i.e. without spaces around =)
#
# Optional arugments:
#
# format:		Optional argument to specify the format of how key/value should be
# 			modified/appended in the configuration file. The default is key = value.
#
# Example Call(s):
#
#     With default format of 'key = value':
#     replace_or_append '/etc/sysctl.conf' '^kernel.randomize_va_space' '2' '@CCENUM@'
#
#     With custom key/value format:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' 'disabled' '@CCENUM@' '%s=%s'
#
#     With a variable:
#     replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '@CCENUM@' '%s=%s'
#
function replace_or_append {
  local default_format='%s = %s' case_insensitive_mode=yes sed_case_insensitive_option='' grep_case_insensitive_option=''
  local config_file=$1
  local key=$2
  local value=$3
  local cce=$4
  local format=$5

  if [ "$case_insensitive_mode" = yes ]; then
    sed_case_insensitive_option="i"
    grep_case_insensitive_option="-i"
  fi
  [ -n "$format" ] || format="$default_format"
  # Check sanity of the input
  [ $# -ge "3" ] || { echo "Usage: replace_or_append <config_file_location> <key_to_search> <new_value> [<CCE number or literal '@CCENUM@' if unknown>] [printf-like format, default is '$default_format']" >&2; exit 1; }

  # Test if the config_file is a symbolic link. If so, use --follow-symlinks with sed.
  # Otherwise, regular sed command will do.
  sed_command=('sed' '-i')
  if test -L "$config_file"; then
    sed_command+=('--follow-symlinks')
  fi

  # Test that the cce arg is not empty or does not equal @CCENUM@.
  # If @CCENUM@ exists, it means that there is no CCE assigned.
  if [ -n "$cce" ] && [ "$cce" != '@CCENUM@' ]; then
    cce="CCE-${cce}"
  else
    cce="CCE"
  fi

  # Strip any search characters in the key arg so that the key can be replaced without
  # adding any search characters to the config file.
  stripped_key=$(sed 's/[\^=\$,;+]*//g' <<< "$key")

  # shellcheck disable=SC2059
  printf -v formatted_output "$format" "$stripped_key" "$value"

  # If the key exists, change it. Otherwise, add it to the config_file.
  # We search for the key string followed by a word boundary (matched by \>),
  # so if we search for 'setting', 'setting2' won't match.
  if LC_ALL=C grep -q -m 1 $grep_case_insensitive_option -e "${key}\\>" "$config_file"; then
    "${sed_command[@]}" "s/${key}\\>.*/$formatted_output/g$sed_case_insensitive_option" "$config_file"
  else
    # \n is precaution for case where file ends without trailing newline
    printf '\n# Per %s: Set %s in %s\n' "$cce" "$formatted_output" "$config_file" >> "$config_file"
    printf '%s\n' "$formatted_output" >> "$config_file"
  fi
}

replace_or_append '/etc/sysconfig/selinux' '^SELINUX=' $var_selinux_state '' '%s=%s'

fixfiles onboot
fixfiles -f relabel
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value var_selinux_state # promote to variable
  set_fact:
    var_selinux_state: !!str |-
        enforcing
  tags:
    - always

- name: "Ensure SELinux State is Enforcing"
  lineinfile:
    path: /etc/sysconfig/selinux
    regexp: '^SELINUX='
    line: "SELINUX={{ var_selinux_state }}"
    create: yes
  tags:
    - selinux_state
    - high_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-3
    - NIST-800-53-AC-3(3)
    - NIST-800-53-AC-3(4)
    - NIST-800-53-AC-4
    - NIST-800-53-AC-6
    - NIST-800-53-AU-9
    - NIST-800-53-SI-6(a)
    - NIST-800-171-3.1.2
    - NIST-800-171-3.7.2
    - DISA-STIG-RHEL-06-000020

Set Boot Loader Password   [ref]group

During the boot process, the boot loader is responsible for starting the execution of the kernel and passing options to it. The boot loader allows for the selection of different kernels - possibly on different partitions or media. The default Red Hat Enterprise Linux boot loader for x86 systems is called GRUB. Options it can pass to the kernel include single-user mode, which provides root access without any authentication, and the ability to disable SELinux. To prevent local users from modifying the boot parameters and endangering security, protect the boot loader configuration with a password and ensure its configuration file's permissions are set properly.

contains 4 rules

Verify /etc/grub.conf User Ownership   [ref]rule

The file /etc/grub.conf should be owned by the root user to prevent destruction or modification of the file. To properly set the owner of /etc/grub.conf, run the command:

$ sudo chown root /etc/grub.conf 

Rationale:

Only root should be able to modify important boot parameters.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:configure

chown 0 /boot/grub/grub.conf
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /boot/grub/grub.conf
  stat:
    path: /boot/grub/grub.conf
  register: file_exists

- name: Ensure owner 0 on /boot/grub/grub.conf
  file:
    path: /boot/grub/grub.conf
    owner: 0
  when: file_exists.stat.exists
  tags:
    - file_owner_grub_conf
    - medium_severity
    - configure_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-6(7)
    - PCI-DSS-Req-7.1
    - DISA-STIG-RHEL-06-000065

Set Boot Loader Password in grub.conf   [ref]rule

The grub boot loader should have password protection enabled to protect boot-time settings. To do so, select a password and then generate a hash from it by running the following command:

$ grub-crypt --sha-512
When prompted to enter a password, insert the following line into /etc/grub.conf immediately after the header comments. (Use the output from grub-crypt as the value of password-hash):
password --encrypted password-hash
NOTE: To meet FISMA Moderate, the bootloader password MUST differ from the root password.

Rationale:

Password protection on the boot loader configuration ensures users with physical access cannot trivially alter important bootloader settings. These include which kernel to use, and whether to enter single-user mode.

Severity:  medium

Verify /etc/grub.conf Group Ownership   [ref]rule

The file /etc/grub.conf should be group-owned by the root group to prevent destruction or modification of the file. To properly set the group owner of /etc/grub.conf, run the command:

$ sudo chgrp root /etc/grub.conf

Rationale:

The root group is a highly-privileged group. Furthermore, the group-owner of this file should not have any access privileges anyway.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:configure

chgrp 0 /boot/grub/grub.conf
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: Test for existence /boot/grub/grub.conf
  stat:
    path: /boot/grub/grub.conf
  register: file_exists

- name: Ensure group owner 0 on /boot/grub/grub.conf
  file:
    path: /boot/grub/grub.conf
    group: 0
  when: file_exists.stat.exists
  tags:
    - file_groupowner_grub_conf
    - medium_severity
    - configure_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-6(7)
    - PCI-DSS-Req-7.1
    - DISA-STIG-RHEL-06-000066

Verify /boot/grub/grub.conf Permissions   [ref]rule

File permissions for /boot/grub/grub.conf should be set to 600, which is the default. To properly set the permissions of /boot/grub/grub.conf, run the command:

$ sudo chmod 600 /boot/grub/grub.conf

Rationale:

Proper permissions ensure that only the root user can modify important boot parameters.

Severity:  medium

Remediation Shell script:   (show)

Complexity:low
Disruption:low
Strategy:configure

chmod 600 /boot/grub/grub.conf
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:configure
- name: Ensure permission 600 on /boot/grub/grub.conf
  file:
    path: /boot/grub/grub.conf
    mode: 600
  tags:
    - file_permissions_grub_conf
    - medium_severity
    - configure_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-6(7)
    - DISA-STIG-RHEL-06-000067

Protect Random-Number Entropy Pool   [ref]group

The I/O operations of the Linux kernel block layer due to their inherently unpredictable execution times have been traditionally considered as a reliable source to contribute to random-number entropy pool of the Linux kernel. This has changed with introduction of solid-state storage devices (SSDs) though.

contains 1 rule

Ensure Solid State Drives Do Not Contribute To Random-Number Entropy Pool   [ref]rule

For each solid-state drive on the system, run:

 # echo 0 > /sys/block/DRIVE/queue/add_random

Rationale:

In contrast to traditional electromechanical magnetic disks, containing spinning disks and / or movable read / write heads, the solid-state storage devices (SSDs) do not contain moving / mechanical components. Therefore the I/O operation completion times are much more predictable for them.

Severity:  medium

Remediation Shell script:   (show)


# First obtain the list of block devices present on system into array
#
# Used lsblk options:
# -o NAME	Display only block device name
# -a		Display all devices (including empty ones) in the list
# -d		Don't print device holders or slaves information
# -n		Suppress printing of introductory heading line in the list
SYSTEM_BLOCK_DEVICES=($(/bin/lsblk -o NAME -a -d -n))

# For each SSD block device from that list
# (device where /sys/block/DEVICE/queue/rotation == 0)
for BLOCK_DEVICE in "${SYSTEM_BLOCK_DEVICES[@]}"
do
	# Verify the block device is SSD
	if grep -q "0" /sys/block/${BLOCK_DEVICE}/queue/rotational
	then
		# If particular SSD is configured to contribute to
		# random-number entropy pool, disable it
		if grep -q "1" /sys/block/${BLOCK_DEVICE}/queue/add_random
		then
			echo "0" > /sys/block/${BLOCK_DEVICE}/queue/add_random
		fi
	fi
done

Account and Access Control   [ref]group

In traditional Unix security, if an attacker gains shell access to a certain login account, they can perform any action or access any file to which that account has access. Therefore, making it more difficult for unauthorized people to gain shell access to accounts, particularly to privileged accounts, is a necessary part of securing a system. This section introduces mechanisms for restricting access to accounts under Red Hat Enterprise Linux 6.

contains 29 rules

Protect Accounts by Configuring PAM   [ref]group

PAM, or Pluggable Authentication Modules, is a system which implements modular authentication for Linux programs. PAM provides a flexible and configurable architecture for authentication, and it should be configured to minimize exposure to unnecessary risk. This section contains guidance on how to accomplish that.

PAM is implemented as a set of shared objects which are loaded and invoked whenever an application wishes to authenticate a user. Typically, the application must be running as root in order to take advantage of PAM, because PAM's modules often need to be able to access sensitive stores of account information, such as /etc/shadow. Traditional privileged network listeners (e.g. sshd) or SUID programs (e.g. sudo) already meet this requirement. An SUID root application, userhelper, is provided so that programs which are not SUID or privileged themselves can still take advantage of PAM.

PAM looks in the directory /etc/pam.d for application-specific configuration information. For instance, if the program login attempts to authenticate a user, then PAM's libraries follow the instructions in the file /etc/pam.d/login to determine what actions should be taken.

One very important file in /etc/pam.d is /etc/pam.d/system-auth. This file, which is included by many other PAM configuration files, defines 'default' system authentication measures. Modifying this file is a good way to make far-reaching authentication changes, for instance when implementing a centralized authentication service.

Warning:  Be careful when making changes to PAM's configuration files. The syntax for these files is complex, and modifications can have unexpected consequences. The default configurations shipped with applications should be sufficient for most users.
Warning:  Running authconfig or system-config-authentication will re-write the PAM configuration files, destroying any manually made changes and replacing them with a series of system defaults. One reference to the configuration file syntax can be found at http://www.linux-pam.org/Linux-PAM-html/sag-configuration-file.html.
contains 10 rules

Set Password Hashing Algorithm   [ref]group

The system's default algorithm for storing password hashes in /etc/shadow is SHA-512. This can be configured in several locations.

contains 2 rules

Set Password Hashing Algorithm in /etc/login.defs   [ref]rule

In /etc/login.defs, add or correct the following line to ensure the system will use SHA-512 as the hashing algorithm:

ENCRYPT_METHOD SHA512

Rationale:

Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised. Passwords that are encrypted with a weak algorithm are no more protected than if they are kept in plain text.

Using a stronger hashing algorithm makes password cracking attacks more difficult.

Severity:  medium

Remediation Shell script:   (show)

if grep --silent ^ENCRYPT_METHOD /etc/login.defs ; then
	sed -i 's/^ENCRYPT_METHOD.*/ENCRYPT_METHOD SHA512/g' /etc/login.defs
else
	echo "" >> /etc/login.defs
	echo "ENCRYPT_METHOD SHA512" >> /etc/login.defs
fi
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: Set Password Hashing Algorithm in /etc/login.defs
  lineinfile:
      dest: /etc/login.defs
      regexp: ^#?ENCRYPT_METHOD
      line: ENCRYPT_METHOD SHA512
      state: present
  tags:
    - set_password_hashing_algorithm_logindefs
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-IA-5(b)
    - NIST-800-53-IA-5(c)
    - NIST-800-53-IA-5(1)(c)
    - NIST-800-53-IA-7
    - NIST-800-171-3.13.11
    - PCI-DSS-Req-8.2.1
    - CJIS-5.6.2.2
    - DISA-STIG-RHEL-06-000063

Set PAM's Password Hashing Algorithm   [ref]rule

The PAM system service can be configured to only store encrypted representations of passwords. In /etc/pam.d/system-auth, the password section of the file controls which PAM modules execute during a password change. Set the pam_unix.so module in the password section to include the argument sha512, as shown below:

password    sufficient    pam_unix.so sha512 other arguments...

This will help ensure when local users change their passwords, hashes for the new passwords will be generated using the SHA-512 algorithm. This is the default.

Rationale:

Passwords need to be protected at all times, and encryption is the standard method for protecting passwords. If passwords are not encrypted, they can be plainly read (i.e., clear text) and easily compromised. Passwords that are encrypted with a weak algorithm are no more protected than if they are kepy in plain text.

This setting ensures user and group account administration utilities are configured to store only encrypted representations of passwords. Additionally, the crypt_style configuration option ensures the use of a strong hashing algorithm that makes password cracking attacks more difficult.

Severity:  medium

Remediation Shell script:   (show)


AUTH_FILES[0]="/etc/pam.d/system-auth"
AUTH_FILES[1]="/etc/pam.d/password-auth"

for pamFile in "${AUTH_FILES[@]}"
do
	if ! grep -q "^password.*sufficient.*pam_unix.so.*sha512" $pamFile; then
		sed -i --follow-symlinks "/^password.*sufficient.*pam_unix.so/ s/$/ sha512/" $pamFile
	fi
done

Set Lockouts for Failed Password Attempts   [ref]group

The pam_faillock PAM module provides the capability to lock out user accounts after a number of failed login attempts. Its documentation is available in /usr/share/doc/pam-VERSION/txts/README.pam_faillock.

Warning:  Locking out user accounts presents the risk of a denial-of-service attack. The lockout policy must weigh whether the risk of such a denial-of-service attack outweighs the benefits of thwarting password guessing attacks.
contains 2 rules

Limit Password Reuse   [ref]rule

Do not allow users to reuse recent passwords. This can be accomplished by using the remember option for the pam_unix or pam_pwhistory PAM modules.

In the file /etc/pam.d/system-auth, append remember=24 to the line which refers to the pam_unix.so or pam_pwhistory.somodule, as shown below:

  • for the pam_unix.so case:
    password sufficient pam_unix.so ...existing_options... remember=24
  • for the pam_pwhistory.so case:
    password requisite pam_pwhistory.so ...existing_options... remember=24
The DoD STIG requirement is 5 passwords.

Rationale:

Preventing re-use of previous passwords helps ensure that a compromised password is not re-used by a user.

Severity:  medium

Remediation Shell script:   (show)


var_password_pam_unix_remember="24"

AUTH_FILES[0]="/etc/pam.d/system-auth"
AUTH_FILES[1]="/etc/pam.d/password-auth"

for pamFile in "${AUTH_FILES[@]}"
do
	if grep -q "remember=" $pamFile; then
		sed -i --follow-symlinks "s/\(^password.*sufficient.*pam_unix.so.*\)\(\(remember *= *\)[^ $]*\)/\1remember=$var_password_pam_unix_remember/" $pamFile
	else
		sed -i --follow-symlinks "/^password[[:space:]]\+sufficient[[:space:]]\+pam_unix.so/ s/$/ remember=$var_password_pam_unix_remember/" $pamFile
	fi
done
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Strategy:configure
- name: XCCDF Value var_password_pam_unix_remember # promote to variable
  set_fact:
    var_password_pam_unix_remember: !!str |-
        24
  tags:
    - always

- name: "Do not allow users to reuse recent passwords - system-auth (change)"
  replace:
    dest: /etc/pam.d/system-auth
    follow: yes
    regexp: '^(password\s+sufficient\s+pam_unix\.so\s.*remember\s*=\s*)(\S+)(.*)$'
    replace: '\g<1>{{ var_password_pam_unix_remember }}\g<3>'
  tags:
    - accounts_password_pam_unix_remember
    - medium_severity
    - configure_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-IA-5(f)
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-171-3.5.8
    - PCI-DSS-Req-8.2.5
    - CJIS-5.6.2.1.1
    - DISA-STIG-RHEL-06-000274

- name: "Do not allow users to reuse recent passwords - system-auth (add)"
  replace:
    dest: /etc/pam.d/system-auth
    follow: yes
    regexp: '^password\s+sufficient\s+pam_unix\.so\s(?!.*remember\s*=\s*).*$'
    replace: '\g<0> remember={{ var_password_pam_unix_remember }}'
  tags:
    - accounts_password_pam_unix_remember
    - medium_severity
    - configure_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-IA-5(f)
    - NIST-800-53-IA-5(1)(e)
    - NIST-800-171-3.5.8
    - PCI-DSS-Req-8.2.5
    - CJIS-5.6.2.1.1
    - DISA-STIG-RHEL-06-000274

Set Deny For Failed Password Attempts   [ref]rule

To configure the system to lock out accounts after a number of incorrect login attempts using pam_faillock.so, modify the content of both /etc/pam.d/system-auth and /etc/pam.d/password-auth as follows:

  • add the following line immediately before the pam_unix.so statement in the AUTH section:
    auth required pam_faillock.so preauth silent deny=5 unlock_time=never fail_interval=900
  • add the following line immediately after the pam_unix.so statement in the AUTH section:
    auth [default=die] pam_faillock.so authfail deny=5 unlock_time=never fail_interval=900
  • add the following line immediately before the pam_unix.so statement in the ACCOUNT section:
    account required pam_faillock.so

Rationale:

Locking out user accounts after a number of incorrect attempts prevents direct password guessing attacks.

Severity:  medium

Remediation Shell script:   (show)


var_accounts_passwords_pam_faillock_deny="5"
function include_set_faillock_option {
	:
}

function insert_preauth {
	local pam_file="$1"
	local option="$2"
	local value="$3"
	# is auth required pam_faillock.so preauth present?
	if grep -qE "^\s*auth\s+required\s+pam_faillock\.so\s+preauth.*$" "$pam_file" ; then
		# is the option set?
		if grep -qE "^\s*auth\s+required\s+pam_faillock\.so\s+preauth.*$option=([0-9]*).*$" "$pam_file" ; then
			# just change the value of option to a correct value
			sed -i --follow-symlinks "s/\(^auth.*required.*pam_faillock.so.*preauth.*silent.*\)\($option *= *\).*/\1\2$value/" "$pam_file"
		# the option is not set.
		else
			# append the option
			sed -i --follow-symlinks "/^auth.*required.*pam_faillock.so.*preauth.*silent.*/ s/$/ $option=$value/" "$pam_file"
		fi
	# auth required pam_faillock.so preauth is not present, insert the whole line
	else
		sed -i --follow-symlinks "/^auth.*sufficient.*pam_unix.so.*/i auth        required      pam_faillock.so preauth silent $option=$value" "$pam_file"
	fi
}

function insert_authfail {
	local pam_file="$1"
	local option="$2"
	local value="$3"
	# is auth default pam_faillock.so authfail present?
	if grep -qE "^\s*auth\s+(\[default=die\])\s+pam_faillock\.so\s+authfail.*$" "$pam_file" ; then
		# is the option set?
		if grep -qE "^\s*auth\s+(\[default=die\])\s+pam_faillock\.so\s+authfail.*$option=([0-9]*).*$" "$pam_file" ; then
			# just change the value of option to a correct value
			sed -i --follow-symlinks "s/\(^auth.*[default=die].*pam_faillock.so.*authfail.*\)\($option *= *\).*/\1\2$value/" "$pam_file"
		# the option is not set.
		else
			# append the option
			sed -i --follow-symlinks "/^auth.*[default=die].*pam_faillock.so.*authfail.*/ s/$/ $option=$value/" "$pam_file"
		fi
	# auth default pam_faillock.so authfail is not present, insert the whole line
	else
		sed -i --follow-symlinks "/^auth.*sufficient.*pam_unix.so.*/a auth        [default=die] pam_faillock.so authfail $option=$value" "$pam_file"
	fi
}

function insert_account {
	local pam_file="$1"
	if ! grep -qE "^\s*account\s+required\s+pam_faillock\.so.*$" "$pam_file" ; then
		sed -E -i --follow-symlinks "/^\s*account\s*required\s*pam_unix.so/i account     required      pam_faillock.so" "$pam_file"
	fi
}

function set_faillock_option {
	local pam_file="$1"
	local option="$2"
	local value="$3"
	insert_preauth "$pam_file" "$option" "$value"
	insert_authfail "$pam_file" "$option" "$value"
	insert_account "$pam_file"
}

include_set_faillock_option

AUTH_FILES[0]="/etc/pam.d/system-auth"
AUTH_FILES[1]="/etc/pam.d/password-auth"

for pam_file in "${AUTH_FILES[@]}"
do
	set_faillock_option "$pam_file" "deny" "$var_accounts_passwords_pam_faillock_deny"
done
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: XCCDF Value var_accounts_passwords_pam_faillock_deny # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_deny: !!str |-
        5
  tags:
    - always
- name: XCCDF Value var_accounts_passwords_pam_faillock_unlock_time # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_unlock_time: !!str |-
        never
  tags:
    - always
- name: XCCDF Value var_accounts_passwords_pam_faillock_fail_interval # promote to variable
  set_fact:
    var_accounts_passwords_pam_faillock_fail_interval: !!str |-
        900
  tags:
    - always

- name: set auth pam_faillock before pam_unix.so
  pamd:
    name: system-auth
    type: auth
    control: sufficient
    module_path: pam_unix.so
    new_type: auth
    new_control: required
    new_module_path: pam_faillock.so
    module_arguments: 'preauth
        silent
        deny: {{ var_accounts_passwords_pam_faillock_deny }}
        unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time }}
        fail_interval={{ var_accounts_passwords_pam_faillock_fail_interval }}'
    state: before
  tags:
    - accounts_passwords_pam_faillock_deny
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-7(a)
    - NIST-800-53-AC-7(b)
    - NIST-800-171-3.1.8
    - PCI-DSS-Req-8.1.6
    - CJIS-5.5.3
    - DISA-STIG-RHEL-06-000061

- name: set auth pam_faillock after pam_unix.so
  pamd:
    name: system-auth
    type: auth
    control: sufficient
    module_path: pam_unix.so
    new_type: auth
    new_control: '[default=die]'
    new_module_path: pam_faillock.so
    module_arguments: 'preauth
        silent
        deny: {{ var_accounts_passwords_pam_faillock_deny }}
        unlock_time={{ var_accounts_passwords_pam_faillock_unlock_time }}
        fail_interval={{ var_accounts_passwords_pam_faillock_fail_interval }}'
    state: after
  tags:
    - accounts_passwords_pam_faillock_deny
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-7(a)
    - NIST-800-53-AC-7(b)
    - NIST-800-171-3.1.8
    - PCI-DSS-Req-8.1.6
    - CJIS-5.5.3
    - DISA-STIG-RHEL-06-000061

- name: set account pam_faillock before pam_unix.so
  pamd:
    name: system-auth
    type: account
    control: required
    module_path: pam_unix.so
    new_type: account
    new_control: required
    new_module_path: pam_faillock.so
    state: before
  tags:
    - accounts_passwords_pam_faillock_deny
    - medium_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-7(a)
    - NIST-800-53-AC-7(b)
    - NIST-800-171-3.1.8
    - PCI-DSS-Req-8.1.6
    - CJIS-5.5.3
    - DISA-STIG-RHEL-06-000061

Set Password Quality Requirements   [ref]group

The default pam_cracklib PAM module provides strength checking for passwords. It performs a number of checks, such as making sure passwords are not similar to dictionary words, are of at least a certain length, are not the previous password reversed, and are not simply a change of case from the previous password. It can also require passwords to be in certain character classes.

The man page pam_cracklib(8) provides information on the capabilities and configuration of each.

contains 6 rules

Set Password Quality Requirements, if using pam_cracklib   [ref]group

The pam_cracklib PAM module can be configured to meet requirements for a variety of policies.

For example, to configure pam_cracklib to require at least one uppercase character, lowercase character, digit, and other (special) character, locate the following line in /etc/pam.d/system-auth:

password requisite pam_cracklib.so try_first_pass retry=3
and then alter it to read:
password required pam_cracklib.so try_first_pass retry=3 maxrepeat=3 minlen=14 dcredit=-1 ucredit=-1 ocredit=-1 lcredit=-1 difok=4
If no such line exists, add one as the first line of the password section in /etc/pam.d/system-auth. The arguments can be modified to ensure compliance with your organization's security policy. Discussion of each parameter follows.

Warning:  Note that the password quality requirements are not enforced for the root account for some reason.
contains 6 rules

Set Password Retry Prompts Permitted Per-Session   [ref]rule

To configure the number of retry prompts that are permitted per-session:

Edit the pam_cracklib.so statement in /etc/pam.d/system-auth to show retry=3, or a lower value if site policy is more restrictive.

The DoD requirement is a maximum of 3 prompts per session.

Rationale:

Setting the password retry prompts that are permitted on a per-session basis to a low value requires some software, such as SSH, to re-connect. This can slow down and draw additional attention to some types of password-guessing attacks. Note that this is different from account lockout, which is provided by the pam_faillock module.

Severity:  unknown

References:  CCI-001092, IA-5(c)

Set Password Strength Minimum Special Characters   [ref]rule

The pam_cracklib module's ocredit= parameter controls requirements for usage of special (or ``other'') characters in a password. When set to a negative number, any password will be required to contain that many special characters. When set to a positive number, pam_cracklib will grant +1 additional length credit for each special character. Add ocredit=-1 after pam_cracklib.so to require use of a special character in passwords.

Rationale:

Requiring a minimum number of special characters makes password guessing attacks more difficult by ensuring a larger search space.

Severity:  unknown

Set Password Strength Minimum Digit Characters   [ref]rule

The pam_cracklib module's dcredit parameter controls requirements for usage of digits in a password. When set to a negative number, any password will be required to contain that many digits. When set to a positive number, pam_cracklib will grant +1 additional length credit for each digit. Add dcredit=-1 after pam_cracklib.so to require use of a digit in passwords.

Rationale:

Requiring digits makes password guessing attacks more difficult by ensuring a larger search space.

Severity:  unknown

Set Password Strength Minimum Uppercase Characters   [ref]rule

The pam_cracklib module's ucredit= parameter controls requirements for usage of uppercase letters in a password. When set to a negative number, any password will be required to contain that many uppercase characters. When set to a positive number, pam_cracklib will grant +1 additional length credit for each uppercase character. Add ucredit=-1 after pam_cracklib.so to require use of an upper case character in passwords.

Rationale:

Requiring a minimum number of uppercase characters makes password guessing attacks more difficult by ensuring a larger search space.

Severity:  unknown

Set Password Strength Minimum Lowercase Characters   [ref]rule

The pam_cracklib module's lcredit= parameter controls requirements for usage of lowercase letters in a password. When set to a negative number, any password will be required to contain that many lowercase characters. When set to a positive number, pam_cracklib will grant +1 additional length credit for each lowercase character. Add lcredit=-1 after pam_cracklib.so to require use of a lowercase character in passwords.

Rationale:

Requiring a minimum number of lowercase characters makes password guessing attacks more difficult by ensuring a larger search space.

Severity:  unknown

Set Password Strength Minimum Different Characters   [ref]rule

The pam_cracklib module's difok parameter controls requirements for usage of different characters during a password change. Add difok=3 after pam_cracklib.so to require differing characters when changing passwords. The DoD requirement is 4.

Rationale:

Requiring a minimum number of different characters during password changes ensures that newly changed passwords should not resemble previously compromised ones. Note that passwords which are changed on compromised systems will still be compromised, however.

Severity:  unknown

Protect Physical Console Access   [ref]group

It is impossible to fully protect a system from an attacker with physical access, so securing the space in which the system is located should be considered a necessary step. However, there are some steps which, if taken, make it more difficult for an attacker to quickly or undetectably modify a system from its console.

contains 1 rule

Disable Interactive Boot   [ref]rule

To disable the ability for users to perform interactive startups, perform both of the following:

  1. Edit the file /etc/sysconfig/init. Add or correct the line:
    PROMPT=no
  2. Inspect the kernel boot arguments (which follow the word kernel) in /etc/grub.conf and ensure the confirm argument is not present.
Both the PROMPT option of the /etc/sysconfig/init file and the confirm kernel boot argument of the /etc/grub.conf file allow the console user to perform an interactive system startup, in which it is possible to select the set of services which are started on boot.

Rationale:

Using interactive boot, the console user could disable auditing, firewalls, or other services, weakening system security.

Severity:  medium

Remediation Shell script:   (show)

Reboot:true

# Ensure value of PROMPT key in /etc/sysconfig/init is set to 'no'
grep -q ^PROMPT /etc/sysconfig/init && \
  sed -i "s/PROMPT.*/PROMPT=no/g" /etc/sysconfig/init
if ! [ $? -eq 0 ]; then
    echo "PROMPT=no" >> /etc/sysconfig/init
fi

# Ensure 'confirm' kernel boot argument is not present in some of
# kernel lines in /etc/grub.conf
sed -i --follow-symlinks "s/confirm//gI" /etc/grub.conf

Secure Session Configuration Files for Login Accounts   [ref]group

When a user logs into a Unix account, the system configures the user's session by reading a number of files. Many of these files are located in the user's home directory, and may have weak permissions as a result of user error or misconfiguration. If an attacker can modify or even read certain types of account configuration information, they can often gain full access to the affected user's account. Therefore, it is important to test and correct configuration file permissions for interactive accounts, particularly those of privileged users such as root or system administrators.

contains 7 rules

Ensure that Users Have Sensible Umask Values   [ref]group

The umask setting controls the default permissions for the creation of new files. With a default umask setting of 077, files and directories created by users will not be readable by any other user on the system. Users who wish to make specific files group- or world-readable can accomplish this by using the chmod command. Additionally, users can make all their files readable to their group by default by setting a umask of 027 in their shell configuration files. If default per-user groups exist (that is, if every user has a default group whose name is the same as that user's username and whose only member is the user), then it may even be safe for users to select a umask of 007, making it very easy to intentionally share files with groups of which the user is a member.

contains 4 rules

Ensure the Default Bash Umask is Set Correctly   [ref]rule

To ensure the default umask for users of the Bash shell is set properly, add or correct the umask setting in /etc/bashrc to read as follows:

umask 077

Rationale:

The umask value influences the permissions assigned to files when they are created. A misconfigured umask value could result in files with excessive permissions that can be read or written to by unauthorized users.

Severity:  unknown

Remediation Shell script:   (show)


var_accounts_user_umask="077"

grep -q umask /etc/bashrc && \
  sed -i "s/umask.*/umask $var_accounts_user_umask/g" /etc/bashrc
if ! [ $? -eq 0 ]; then
    echo "umask $var_accounts_user_umask" >> /etc/bashrc
fi

Ensure the Default C Shell Umask is Set Correctly   [ref]rule

To ensure the default umask for users of the C shell is set properly, add or correct the umask setting in /etc/csh.cshrc to read as follows:

umask 077

Rationale:

The umask value influences the permissions assigned to files when they are created. A misconfigured umask value could result in files with excessive permissions that can be read or written to by unauthorized users.

Severity:  unknown

Remediation Shell script:   (show)


var_accounts_user_umask="077"

grep -q umask /etc/csh.cshrc && \
  sed -i "s/umask.*/umask $var_accounts_user_umask/g" /etc/csh.cshrc
if ! [ $? -eq 0 ]; then
    echo "umask $var_accounts_user_umask" >> /etc/csh.cshrc
fi

Ensure the Default Umask is Set Correctly in /etc/profile   [ref]rule

To ensure the default umask controlled by /etc/profile is set properly, add or correct the umask setting in /etc/profile to read as follows:

umask 077

Rationale:

The umask value influences the permissions assigned to files when they are created. A misconfigured umask value could result in files with excessive permissions that can be read or written to by unauthorized users.

Severity:  unknown

Ensure that No Dangerous Directories Exist in Root's Path   [ref]group

The active path of the root account can be obtained by starting a new root shell and running:

# echo $PATH
This will produce a colon-separated list of directories in the path.

Certain path elements could be considered dangerous, as they could lead to root executing unknown or untrusted programs, which could contain malicious code. Since root may sometimes work inside untrusted directories, the . character, which represents the current directory, should never be in the root path, nor should any directory which can be written to by an unprivileged or semi-privileged (system) user.

It is a good practice for administrators to always execute privileged commands by typing the full path to the command.

contains 2 rules

Ensure that Root's Path Does Not Include Relative Paths or Null Directories   [ref]rule

Ensure that none of the directories in root's path is equal to a single . character, or that it contains any instances that lead to relative path traversal, such as .. or beginning a path without the slash (/) character. Also ensure that there are no "empty" elements in the path, such as in these examples:

PATH=:/bin
PATH=/bin:
PATH=/bin::/sbin
These empty elements have the same effect as a single . character.

Rationale:

Including these entries increases the risk that root could execute code from an untrusted location.

Severity:  unknown

References:  CCI-000366, CM-6(b)

Ensure that Root's Path Does Not Include World or Group-Writable Directories   [ref]rule

For each element in root's path, run:

# ls -ld DIR
and ensure that write permissions are disabled for group and other.

Rationale:

Such entries increase the risk that root could execute code provided by unprivileged users, and potentially malicious code.

Severity:  unknown

References:  CCI-000366, CM-6(b)

Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Strategy:restrict
- name: "Fail if user is not root"
  fail:
    msg: 'Root account required to read root $PATH'
  when: ansible_user != "root"
  tags:
    - accounts_root_path_dirs_no_write
    - unknown_severity
    - restrict_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-CM-6(b)

- name: "Get root paths which are not symbolic links"
  shell: 'tr ":" "\n" <<< "$PATH" | xargs -I% find % -maxdepth 0 -type d'
  changed_when: False
  failed_when: False
  register: root_paths
  when: ansible_user == "root"
  check_mode: no
  tags:
    - accounts_root_path_dirs_no_write
    - unknown_severity
    - restrict_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-CM-6(b)

- name: "Disable writability to root directories"
  file:
    path: "{{item}}"
    mode: "g-w,o-w"
  with_items: "{{ root_paths.stdout_lines }}"
  when: root_paths.stdout_lines is defined
  tags:
    - accounts_root_path_dirs_no_write
    - unknown_severity
    - restrict_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-CM-6(b)

Ensure that User Home Directories are not Group-Writable or World-Readable   [ref]rule

For each human user of the system, view the permissions of the user's home directory:

# ls -ld /home/USER
Ensure that the directory is not group-writable and that it is not world-readable. If necessary, repair the permissions:
# chmod g-w /home/USER
# chmod o-rwx /home/USER

Warning:  This action may involve modifying user home directories. Notify your user community, and solicit input if appropriate, before making this type of change.
Rationale:

User home directories contain many configuration files which affect the behavior of a user's account. No user should ever have write permission to another user's home directory. Group shared directories can be configured in sub-directories or elsewhere in the filesystem if they are needed. Typically, user home directories should not be world-readable, as it would disclose file names to other users. If a subset of users need read access to one another's home directories, this can be provided using groups or ACLs.

Severity:  unknown

References:  CCI-000225, AC-6(7)

Warning Banners for System Accesses   [ref]group

Each system should expose as little information about itself as possible.

System banners, which are typically displayed just before a login prompt, give out information about the service or the host's operating system. This might include the distribution name and the system kernel version, and the particular version of a network service. This information can assist intruders in gaining access to the system as it can reveal whether the system is running vulnerable software. Most network services can be configured to limit what information is displayed.

Many organizations implement security policies that require a system banner provide notice of the system's ownership, provide warning to unauthorized users, and remind authorized users of their consent to monitoring.

contains 2 rules
contains 1 rule

Enable GUI Warning Banner   [ref]rule

To enable displaying a login warning banner in the GNOME Display Manager's login screen, run the following command:

$ sudo gconftool-2 --direct \
  --config-source xml:readwrite:/etc/gconf/gconf.xml.mandatory \
  --type bool \
  --set /apps/gdm/simple-greeter/banner_message_enable true
To display a banner, this setting must be enabled and then banner text must also be set.

Rationale:

An appropriate warning message reinforces policy awareness during the login process and facilitates possible legal action against attackers.

Severity:  medium

Remediation Shell script:   (show)

# Install GConf2 package if not installed
if ! rpm -q GConf2; then
  yum -y install GConf2
fi

# Enable displaying of a login warning banner in the GNOME Display Manager's
# login screen
gconftool-2 --direct \
            --config-source "xml:readwrite:/etc/gconf/gconf.xml.mandatory" \
            --type bool \
            --set /apps/gdm/simple-greeter/banner_message_enable true

Modify the System Login Banner   [ref]rule

To configure the system login banner edit /etc/issue. Replace the default text with a message compliant with the local site policy or a legal disclaimer. The DoD required text is either:

You are accessing a U.S. Government (USG) Information System (IS) that is provided for USG-authorized use only. By using this IS (which includes any device attached to this IS), you consent to the following conditions:
-The USG routinely intercepts and monitors communications on this IS for purposes including, but not limited to, penetration testing, COMSEC monitoring, network operations and defense, personnel misconduct (PM), law enforcement (LE), and counterintelligence (CI) investigations.
-At any time, the USG may inspect and seize data stored on this IS.
-Communications using, or data stored on, this IS are not private, are subject to routine monitoring, interception, and search, and may be disclosed or used for any USG-authorized purpose.
-This IS includes security measures (e.g., authentication and access controls) to protect USG interests -- not for your personal benefit or privacy.
-Notwithstanding the above, using this IS does not constitute consent to PM, LE or CI investigative searching or monitoring of the content of privileged communications, or work product, related to personal representation or services by attorneys, psychotherapists, or clergy, and their assistants. Such communications and work product are private and confidential. See User Agreement for details.


OR:

I've read & consent to terms in IS user agreem't.

Rationale:

Display of a standardized and approved use notification before granting access to the operating system ensures privacy and security notification verbiage used is consistent with applicable federal laws, Executive Orders, directives, policies, regulations, standards, and guidance.

System use notifications are required only for access via login interfaces with human users and are not required when such human interfaces do not exist.

Severity:  medium

Remediation Shell script:   (show)


login_banner_text="--[\s\n]+WARNING[\s\n]+--[\s\n]*This[\s\n]+system[\s\n]+is[\s\n]+for[\s\n]+the[\s\n]+use[\s\n]+of[\s\n]+authorized[\s\n]+users[\s\n]+only.[\s\n]+Individuals[\s\n]*using[\s\n]+this[\s\n]+computer[\s\n]+system[\s\n]+without[\s\n]+authority[\s\n]+or[\s\n]+in[\s\n]+excess[\s\n]+of[\s\n]+their[\s\n]*authority[\s\n]+are[\s\n]+subject[\s\n]+to[\s\n]+having[\s\n]+all[\s\n]+their[\s\n]+activities[\s\n]+on[\s\n]+this[\s\n]+system[\s\n]*monitored[\s\n]+and[\s\n]+recorded[\s\n]+by[\s\n]+system[\s\n]+personnel.[\s\n]+Anyone[\s\n]+using[\s\n]+this[\s\n]*system[\s\n]+expressly[\s\n]+consents[\s\n]+to[\s\n]+such[\s\n]+monitoring[\s\n]+and[\s\n]+is[\s\n]+advised[\s\n]+that[\s\n]*if[\s\n]+such[\s\n]+monitoring[\s\n]+reveals[\s\n]+possible[\s\n]+evidence[\s\n]+of[\s\n]+criminal[\s\n]+activity[\s\n]*system[\s\n]+personal[\s\n]+may[\s\n]+provide[\s\n]+the[\s\n]+evidence[\s\n]+of[\s\n]+such[\s\n]+monitoring[\s\n]+to[\s\n]+law[\s\n]*enforcement[\s\n]+officials."

# There was a regular-expression matching various banners, needs to be expanded
expanded=$(echo "$login_banner_text" | sed 's/(\\\\\x27)\*/\\\x27/g;s/(\\\x27)\*//g;s/\^(\(.*\)|.*$/\1/g;s/\[\\s\\n\][+*]/ /g;s/\\//g;s/[^-]- /\n\n-/g;s/(n)\**//g')
formatted=$(echo "$expanded" | fold -sw 80)

cat <<EOF >/etc/issue
$formatted
EOF

printf "\n" >> /etc/issue

Protect Accounts by Restricting Password-Based Login   [ref]group

Conventionally, Unix shell accounts are accessed by providing a username and password to a login program, which tests these values for correctness using the /etc/passwd and /etc/shadow files. Password-based login is vulnerable to guessing of weak passwords, and to sniffing and man-in-the-middle attacks against passwords entered over a network or at an insecure console. Therefore, mechanisms for accessing accounts by entering usernames and passwords should be restricted to those which are operationally necessary.

contains 9 rules

Set Password Expiration Parameters   [ref]group

The file /etc/login.defs controls several password-related settings. Programs such as passwd, su, and login consult /etc/login.defs to determine behavior with regard to password aging, expiration warnings, and length. See the man page login.defs(5) for more information.

Users should be forced to change their passwords, in order to decrease the utility of compromised passwords. However, the need to change passwords often should be balanced against the risk that users will reuse or write down passwords if forced to change them too often. Forcing password changes every 90-360 days, depending on the environment, is recommended. Set the appropriate value as PASS_MAX_DAYS and apply it to existing accounts with the -M flag.

The PASS_MIN_DAYS (-m) setting prevents password changes for 7 days after the first change, to discourage password cycling. If you use this setting, train users to contact an administrator for an emergency password change in case a new password becomes compromised. The PASS_WARN_AGE (-W) setting gives users 7 days of warnings at login time that their passwords are about to expire.

For example, for each existing human user USER, expiration parameters could be adjusted to a 180 day maximum password age, 7 day minimum password age, and 7 day warning period with the following command:

$ sudo chage -M 180 -m 7 -W 7 USER

contains 3 rules

Restrict Root Logins   [ref]group

Direct root logins should be allowed only for emergency use. In normal situations, the administrator should access the system via a unique unprivileged account, and then use su or sudo to execute privileged commands. Discouraging administrators from accessing the root account directly ensures an audit trail in organizations with multiple administrators. Locking down the channels through which root can connect directly also reduces opportunities for password-guessing against the root account. The login program uses the file /etc/securetty to determine which interfaces should allow root logins. The virtual devices /dev/console and /dev/tty* represent the system consoles (accessible via the Ctrl-Alt-F1 through Ctrl-Alt-F6 keyboard sequences on a default installation). The default securetty file also contains /dev/vc/*. These are likely to be deprecated in most environments, but may be retained for compatibility. Root should also be prohibited from connecting via network protocols. Other sections of this document include guidance describing how to prevent root from logging in via SSH.

contains 3 rules

Verify Only Root Has UID 0   [ref]rule

If any account other than root has a UID of 0, this misconfiguration should be investigated and the accounts other than root should be removed or have their UID changed.
If the account is associated with system commands or applications the UID should be changed to one greater than "0" but less than "1000." Otherwise assign a UID greater than "1000" that has not already been assigned.

Rationale:

An account has root authority if it has a UID of 0. Multiple accounts with a UID of 0 afford more opportunity for potential intruders to guess a password for a privileged account. Proper configuration of sudo is recommended to afford multiple system administrators access to root privileges in an accountable manner.

Severity:  high

Remediation Shell script:   (show)

awk -F: '$3 == 0 && $1 != "root" { print $1 }' /etc/passwd | xargs passwd -l

Restrict Serial Port Root Logins   [ref]rule

To restrict root logins on serial ports, ensure lines of this form do not appear in /etc/securetty:

ttyS0
ttyS1

Rationale:

Preventing direct root login to serial port interfaces helps ensure accountability for actions taken on the systems using the root account.

Severity:  unknown

Remediation Shell script:   (show)

sed -i '/ttyS/d' /etc/securetty
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:low
Strategy:restrict
- name: "Restrict Serial Port Root Logins"
  lineinfile:
    dest: /etc/securetty
    regexp: 'ttyS[0-9]'
    state: absent
  tags:
    - restrict_serial_port_logins
    - unknown_severity
    - restrict_strategy
    - low_complexity
    - low_disruption
    - NIST-800-53-AC-6(2)
    - NIST-800-171-3.1.1
    - NIST-800-171-3.1.5
    - DISA-STIG-RHEL-06-000028
contains 1 rule

Verify Proper Storage and Existence of Password Hashes   [ref]group

By default, password hashes for local accounts are stored in the second field (colon-separated) in /etc/shadow. This file should be readable only by processes running with root credentials, preventing users from casually accessing others' password hashes and attempting to crack them. However, it remains possible to misconfigure the system and store password hashes in world-readable files such as /etc/passwd, or to even store passwords themselves in plaintext on the system. Using system-provided tools for password change/creation should allow administrators to avoid such misconfiguration.

contains 2 rules

Prevent Log In to Accounts With Empty Password   [ref]rule

If an account is configured for password authentication but does not have an assigned password, it may be possible to log into the account without authentication. Remove any instances of the nullok option in /etc/pam.d/system-auth to prevent logins with empty passwords.

Rationale:

If an account has an empty password, anyone could log in and run commands with the privileges of that account. Accounts with empty passwords should never be used in operational environments.

Severity:  high

Remediation Shell script:   (show)

sed --follow-symlinks -i 's/\<nullok\>//g' /etc/pam.d/system-auth
sed --follow-symlinks -i 's/\<nullok\>//g' /etc/pam.d/password-auth
Remediation Ansible snippet:   (show)

Complexity:low
Disruption:medium
Strategy:configure
- name: "Prevent Log In to Accounts With Empty Password - system-auth"
  replace:
    dest: /etc/pam.d/system-auth
    follow: yes
    regexp: 'nullok'
  tags:
    - no_empty_passwords
    - high_severity
    - configure_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-AC-6
    - NIST-800-53-IA-5(b)
    - NIST-800-53-IA-5(c)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-171-3.1.1
    - NIST-800-171-3.1.5
    - PCI-DSS-Req-8.2.3
    - CJIS-5.5.2
    - DISA-STIG-RHEL-06-000030

- name: "Prevent Log In to Accounts With Empty Password - password-auth"
  replace:
    dest: /etc/pam.d/password-auth
    follow: yes
    regexp: 'nullok'
  tags:
    - no_empty_passwords
    - high_severity
    - configure_strategy
    - low_complexity
    - medium_disruption
    - NIST-800-53-AC-6
    - NIST-800-53-IA-5(b)
    - NIST-800-53-IA-5(c)
    - NIST-800-53-IA-5(1)(a)
    - NIST-800-171-3.1.1
    - NIST-800-171-3.1.5
    - PCI-DSS-Req-8.2.3
    - CJIS-5.5.2
    - DISA-STIG-RHEL-06-000030

Verify All Account Password Hashes are Shadowed   [ref]rule

If any password hashes are stored in /etc/passwd (in the second field, instead of an x or *), the cause of this misconfiguration should be investigated. The account should have its password reset and the hash should be properly stored, or the account should be deleted entirely.

Rationale:

The hashes for all user account passwords should be stored in the file /etc/shadow and never in /etc/passwd, which is readable by all users.

Severity:  medium

System Accounting with auditd   [ref]group

The audit service provides substantial capabilities for recording system activities. By default, the service audits about SELinux AVC denials and certain types of security-relevant events such as system logins, account modifications, and authentication events performed by programs such as sudo. Under its default configuration, auditd has modest disk space requirements, and should not noticeably impact system performance.

NOTE: The Linux Audit daemon auditd can be configured to use the augenrules program to read audit rules files (*.rules) located in /etc/audit/rules.d location and compile them to create the resulting form of the /etc/audit/audit.rules configuration file during the daemon startup (default configuration). Alternatively, the auditd daemon can use the auditctl utility to read audit rules from the /etc/audit/audit.rules configuration file during daemon startup, and load them into the kernel. The expected behavior is configured via the appropriate ExecStartPost directive setting in the /usr/lib/systemd/system/auditd.service configuration file. To instruct the auditd daemon to use the augenrules program to read audit rules (default configuration), use the following setting:

ExecStartPost=-/sbin/augenrules --load
in the /usr/lib/systemd/system/auditd.service configuration file. In order to instruct the auditd daemon to use the auditctl utility to read audit rules, use the following setting:
ExecStartPost=-/sbin/auditctl -R /etc/audit/audit.rules
in the /usr/lib/systemd/system/auditd.service configuration file. Refer to [Service] section of the /usr/lib/systemd/system/auditd.service configuration file for further details.

Government networks often have substantial auditing requirements and auditd can be configured to meet these requirements. Examining some example audit records demonstrates how the Linux audit system satisfies common requirements. The following example from Fedora Documentation available at https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Linux/7/html/SELinux_Users_and_Administrators_Guide/sect-Security-Enhanced_Linux-Troubleshooting-Fixing_Problems.html#sect-Security-Enhanced_Linux-Fixing_Problems-Raw_Audit_Messages shows the substantial amount of information captured in a two typical "raw" audit messages, followed by a breakdown of the most important fields. In this example the message is SELinux-related and reports an AVC denial (and the associated system call) that occurred when the Apache HTTP Server attempted to access the /var/www/html/file1 file (labeled with the samba_share_t type):
type=AVC msg=audit(1226874073.147:96): avc:  denied  { getattr } for pid=2465 comm="httpd"
path="/var/www/html/file1" dev=dm-0 ino=284133 scontext=unconfined_u:system_r:httpd_t:s0
tcontext=unconfined_u:object_r:samba_share_t:s0 tclass=file

type=SYSCALL msg=audit(1226874073.147:96): arch=40000003 syscall=196 success=no exit=-13
a0=b98df198 a1=bfec85dc a2=54dff4 a3=2008171 items=0 ppid=2463 pid=2465 auid=502 uid=48
gid=48 euid=48 suid=48 fsuid=48 egid=48 sgid=48 fsgid=48